Can I duplicate a dvd using disk utility but exclude the menu?

I want to duplicate a dvd but exclude the menu. Can I do this using disk utility?

No, Toast automatically handles the copying process—it creates a temporary image, burns it, and then deletes it.

Similar Messages

Can't erase (rewriteable) DVD using Disk Utility

I'm trying to erase a Maxell DVD +RW in my Mac Pro's SuperDrive, but when I click on Erase in Disk Utility (I've tried both Quickly and Completely, and both the drive and the disc itself) it just spins for 30 seconds, and then stops (with all the data still there).
I also downloaded PermanentEraser and dropped the disc icon into the app icon, but it also spun for a while but did nothing. I tried selecting all the files on the disc and manually dragging them to the Trash, but when I try to empty it I receive an error code of -61.
What's going on? Does DiskWarrior somehow create startup disks which can't be erased?

Hey, if you do that ... you can throw disk directly to the trash. if you used fast
erase option, you can only use disk utility !!! trying to that with others software make disk unusable.
when I started to use rewritable disks I did this mistake over more of 10 disks, before I understanded it. Toast warn you, when you use fast erase.

How does one copy a dvd using disk utility?

How does one copu a dvd using disk utility?

By following the instructions in the os Help menu and Disk Utility "Help."

After i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but

after i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but

after i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

Commercial
Roxio Toast
<http://www.roxio.com/enu/products/toast/titanium/>
NTI DragonBurn
<http://www.ntidragonburn.com/en/us/product/dragon_burn.asp?>
Shareware or freeware
DVD Image Utility
<http://geek.thinkunique.org/2007/07/17/dvd-image-utility/>
Disco
<http://discoapp.com/>
no longer supported, but free, simple, and runs well under SL.
LiquidCD
<http://www.maconnect.ch/>
free; iffy support, but, again, simple, and runs well under SL.
Burn
<http://burn-osx.sourceforge.net/Pages/English/home.html>
open source; not clear how active development and support are, but runs well under SL.
Terminal Whiz Kid
mkisofs
<http://cdrecord.berlios.de/private/cdrecord.html>
(part of the cdrtools kit)
Use mkisofs to create the disc image, and burn it with hdiutil or drutil. (Some of the free options mentioned above actually use mkisofs.)

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation it gives me an input/output error and stops. Any tips?

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation and after having selected both my destination and source drives, the operation begins but soon fails due to input/output error. If I try to create an image of the drive it gives me the same error message. Any help would be much appreciated.

Disk Utility only creates a image of the drive, so it's no help getting exactly what you want, which is your files. If the file structure is messed up or the drive is failing then it's no help.
If you have a external boot drive and you can't access the internal non-booting drive though the typical Finder and windows to transfer your files via drag and drop methods, then you need to install Data Rescue on the external boot drive and it will do as best as it can to recover your files. (works on non-encrypted/non-Filevaulted drives only)
.Create a data recovery/undelete external boot drive
Are you sure you have hard drive failure, or that OS X isn't merely not booting?
Because if the drive is working physically, then there is a host of fixes
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

I download dmg files but cannot be open (not recognised). If I try try to use disk utility, it says the disk image unable to attach. Could someone pls help? Thnx

Hi, I am trying to install some programs (on mac book pro mac osx 10.6.8) that are downloaded in "dmg" file format. These are antivirus and security related programs. Unfortunately when I try to open the downloaded file, this does not open and I get message it is not recognised. I have also tried using Disk Utility but I get an error "unable to attach"l. This just started recently. I have downloaded the file several times but same problem recurs. Thanks for your help
PS: Other files directly downloaded from apple work fine.

umjustme wrote:
curious to know your reservations about Kapersky!
They screwed up the first Flashback removal tool very badly, locking several users out of their accounts permanently. It took a day or so for them to react and post a revised tool, but the damage had been done.
They are one of several formerly PC only vendors who rushed to the Mac front back in the spring after the Flashback scare. I would advise giving all of those folks time to prove they really understand OS X before installing it on any of my Macs. There are several others who have proven themselves.
Since you are running what I assume to be a fully up-to-date OS X 10.6.8 you are not vulnerable to any currently known malware capable of impacting OS X or other Mac software. That's no guarantee there won't be something new show up tomorrow, but the chances of any commercial anti-malware software catching it before Apple can react is pretty slim, IMHO.
Now if you are concerned about Windows malware, that's a different story.

How to write DVD using disk utility

I have ripped a dvd to my harddrive to make a backup copy of my dvd. Toast Titanium is giving me error while writing to dvd drive. How can i use disk utility to write this dvd.

Error in Copying a non-commercial DVD using Disk Utility

I have a non-commercial DVD. I am using Disk Utility to make an image and reproduce the DVD. It consistently runs through the cycle and at the very end I get a dialog box:
STOP "Input/Output Error"
Any ideas? I really would like to make back up copies of this video event.
I have used this method before to copy non-commercial DVDs
Thanks
glb
G5 Mac OS X (10.3.9)

Click here for complete instructions. This solution may cost $20.

If leopard won't boot from dvd, use disk utility mount to partition

wanted to share a way that i successfully installed os 9, tiger, and leopard on 1 hard drive. first of all, leopard was the only installation that i had difficulty with. it would not boot off the original dvd, no matter if i held down the 'c' key or the option key, so this is what i did after a lot of reading on the internet to try and troubleshoot this issue.
First thing i did was partition my internal hard drive in 3 partitions using disk utility. the 3rd partition was around 9gb. I installed os9 first on the 1st partition, i then installed tiger on that same partition. then i put in my leopard dvd, and opened up disk utility. and clicked on "restore", and dragged the dvd image as the "source", and chose the 9gb partition as the destination, and clicked on restore. then, i changed the "startup disk" to start from the 9gb where i just restored the image, and rebooted, and went through the leopard setup and chose the 2nd partition as the place to install. this should work with the dvd, or if you made an image from the dvd. I hope this helps someone else whose dvd won't boot, because it was very frustrating after you purchase a faster processor, and faster video card so that your system meets the requirements, and then the dvd won't boot.

Two ways. Use another computer to restore the install disc to one of those ext HD. Then, use it to boot the other machine. Get an ext CD/DVD reader and use it to read the install disc and boot the machine. However, if both the HD and optical reader are kaput, then a trip to an Apple repair station is in order.

MacBook stuck on apple logo. Repaired disk using disk utility, but when I restart, I'm still stuck on apple logo. Please help!

My MacBook is stuck on apple logo and heats up. I tried restarting in safe mode but it's still stuck. I also tried to repair the disk using disk utility. It says that HD is ok, so when I restart, I'm still stuck on the logo. Is there a way I could fix this without loosing my files?

Restart your Mac while holding down the Command + R keys so you can access OS X: About OS X Recovery
From there you can reinstall OS X, repair the startup disk, and restore from a Time Machine backup.
FYI ... wiht ML installed, the only way to repair the startup disk is OS X Recovery, not the Disk Utility app installed on your Mac. You can verify but not repair.

BURN DVD Using Disk Utility not Bootable

I have downloaded TechTool Deluxe for Intel and PPC. Following instructions in Disk Utility, I made/Burned DVD's of each .dmg for Power PC & Intel based computers.
Neither DVD will boot on computers using OS 10.5.6. The PPC DVD has OS 10.4.4 and the Intel has OS 10.4.5. I have tried restart using System Preferences, the "C" key, and "Option".
Can someone tell me how to boot from the DVD's or tell me what I may have done incorrectly?
Bud

There must be some misunderstanding here.
It is the TechTool CD that must boot. If an operating system was installed on the CD via Disk Utility Burn then it should start up on that CD. It does not, even though it will show up in System Preferences/Startup Disk and "Options". I see it as a matter of how Apple installs the .dmg onto the CD as a legitimate startup disk.
All my computers work fine with 10.5.6 or lesser for older machines. The purpose of Techtools for me is to assure that they continue to do so.
The reason for a second G5 is that the first one had an LED light "on" on the logic board making it somewhat inoperable. The second machine comes clean. 10.5.X was installed nicely.
Bud

Can you restore an iPod using Disk Utility?

I put a new hard drive in my 1st gen iPod.
It still shows up in iTunes and music can be transferred over, but when disconnected the iPod shows a folder and exclamation mark so I can't navigate to / listen to any music.
As it's first gen ipod I can't get it to restore or update via iTunes - no options show up to restore or update the software.
Is there any other way I can restore or update the iPod - via disk utility or some other means?
I do have a back up of all the original files that were on the iPod hard drive before I swapped it over.

Hi - thanks, but unless I'm reading the article wrong that won't work for me because you need to use iTunes to restore the iPod and I can't do this - as it's a 1st gen iPod it will only sync with an old version of iTunes and the 'update' and 'restore' tabs don't appear.
So, I'm looking for a way to restore the iPod without having to use iTunes.

Can't partition free space using Disk Utility

So something went wrong when I tried to bootcamp.
Now the situation is following:
1) I can't install Windows using USB stick, it says that the free space is in GPT;
2) I can't partition the free space with Disk Utility, tryied it also with recovery mode, the apply button is clickable and active, but it does nothing, it just stays like so and when I exit from Disk Utility it asks if I want to quit without applying but it doesn't work.
So basically I have wasted 20GB of space and can't do anything with it.
I don't want to format the hole disk, are there any other workarounds without need to reinstall OSX?
I have MacBook Pro 13" Retina (late 2013), 128GB SSD, 8GB ram.

markov-mac:~ markov$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         100.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *100.0 GB   disk1
markov-mac:~ markov$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 0F0D9268-58FC-4832-8FCB-4A11FB5675F6
    =========================================================
    Name:         Macintosh HD
    Status:       Online
    Size:         100335546368 B (100.3 GB)
    Free Space:   15724544 B (15.7 MB)
    |
    +-< Physical Volume 9B8968BE-CE97-4A66-B5B3-31B4EB87E21F
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     100335546368 B (100.3 GB)
    |
    +-> Logical Volume Family B29C277A-660B-41C4-8F5C-A1C5FB01B60F
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume 6736784D-A946-4EBF-BBA2-BC7DDC6C4EDE
            Disk:                  disk1
            Status:                Online
            Size (Total):          99999997952 B (100.0 GB)
            Conversion Progress:   -none-
            Revertible:            No
            LV Name:               Macintosh HD
            Volume Name:           Macintosh HD
            Content Hint:          Apple_HFS
markov-mac:~ markov$ mount
/dev/disk1 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
map -fstab on /Network/Servers (autofs, automounted, nobrowse)

Macbook pro 2010 not showing hdd in disk utility but shows the same in usb

Macbook pro 2010 not showing hard disk in disk uility but same hdd shows when connected to usb original drive, also installed new hard disk 500gb, same result, but connected old hard disk of 500gb shows in disk utility and also able to installed os on it, tried installing lion 10.7 on it with the original and new hdd but not shows in disk utility pls help for this problem

I'm kind of experiencing the same issue now.
A few days ago, when starting up my Mini, I would get a warning that the system didn't recognize the drive with the option to ignore. I hit ignore and all seven drives would mount. Because I have seven drives attached, I had no idea what drive was giving the warning.
Today that drive failed to load up at all. I ran disk utility and after several tries, it said repair was successful yet the drive will not mount.
I'm currently running recovery software on it to see if I can copy everything from it to another drive. It is a fairly old drive, about 3 years old so it's time is short.
I don't have any suggestions but mine does show in disk utility.

Can I duplicate a dvd using disk utility but exclude the menu?

Similar Messages

Maybe you are looking for