Can I execute a report and skip the first screen in CJE0

I'm trying to call transaction CJE0 and skip the first screen. The report name I'm assigning to the PID REI appears in the screen field, but you have to click execute to continue to the report.
Is there something I'm missing.
Thanks
Karen

I've tried using the following code to run project reports without having to select the report name and exectue, but it is still leaving the user on the screen for CJE0 with the correct report name, but it's not skipping the screen and executing the report. Can you see what I'm doing wrong.
Thank-you for your help
Karen
Code -
  data begin of bdcdata occurs 100.
         include structure bdcdata.
  data end of bdcdata.
  data begin of itab occurs 10.
         include structure bdcmsgcoll.
  data end of itab.
data program like sy-repid.
program = '11ERL1A'.
  bdcdata-program  = 'SAPMKCEE'.
  bdcdata-dynpro   = '0500'.
  bdcdata-dynbegin = 'X'.
  append bdcdata.  clear bdcdata.
  bdcdata-fnam     = 'RKB1D-REPID'.
  bdcdata-fval     = program.
  append bdcdata. clear bdcdata.
   call transaction 'CJE0' using bdcdata  mode 'N'
                           messages into itab.

Similar Messages

  • Calling a transaction and skipping the first screen

    Dear forumers,
    In my report program, I will need to call a custom transaction with skipping the first screen.
    And, this custom transaction is created from a query.
    Currently, the codes look like below:-
            SET PARAMETER ID: 'BUK' FIELD w_output-bukrs,
                              'AN1' FIELD w_output-anln1.
            CALL TRANSACTION 'ZCUSTQ' AND SKIP FIRST SCREEN.
    Everything works perfectly alright except for one thing: The first screen is not skipped. When the custom transaction is called, the first screen is still displayed to the user.
    Additionally, I also found out that the "SKIP FIRST SCREEN" does not work because the screen's next screen number is the same. This means the screen 1000's next screen is 1000 as well.
    (See notes in italics below)
    Does anyone have any ideas on how to resolve this? Please help.
    This addition suppresses the display of a screen of the initial dynpro of a called dialog transaction. The addition AND SKIP FIRST SCREEN suppresses the first screen under these prerequisites:
    For the initial dynpro, in the Screen Painter the own dynpro number must not be specified as the next screen number.
    All mandatory input fields of the initial dynpro must be filled completely and with the correct values by the SPA/GPA parameters
    If these prerequisites are met, that screen of the dynpro is displayed that is specified in the Screen Painter as the next dynpro of the initial dynpro.

    For Any Query , if you want to create the Transaction you need to use the Tcode START_REPORT
    in general it will skip the first Transaction codes selection screen , Not your query reports selection screen.
    I checked and verfied...
    Steps to verify the issue..
    1.Go to SE93 ,Now you will go for parametric transaction.
    2. give the Transaction as START_REPORT, there you will have option Skip Initial Screen. You uncheck that.
    3. Now give all information related to your query.
    and see the  effect
    call TRANSACTION 'YYTCODE  AND SKIP FIRST SCREEN.
    This will always trying to skip the First transaction's selection/initial screen , Not your Query selection screen.
    You also try to check and let me know.

  • Urgent: Reports: Skip the first screen

    Hi experts,
       In report program iam calling another program screen. I just want to skip the first screen of the calling program and when i call this program i should directly go into the output screen. Iam using like this. So how should i skip the first screen.
    Please do needful help.
    if p_err_u = 'X'.
    submit rsuniscan_final. "VIA SELECTION-SCREEN AND RETURN.
    Regards.
    AADI

    Use in Submit
       [USING SELECTION-SET variant]
        [USING SELECTION-SETS OF PROGRAM prog]
        [WITH SELECTION-TABLE rspar]
    Santhosh

  • When the user click on the request number it should skip the first screen o

    when the user click on the request number it should skip the first screen of REV track and show the rev track request number details. On click of u201CBacku201D button on this screen the output screen of the report should be displayed again.

    Hello Rohit,
                   What you can do is, when the User Clicks on any particular Request, you use the At Line-Selection Event. In that event, you can set the User Name to default "SY-UNAME" or any other user Name for the specific Request.
                 Again, if you want to check the Owner of the Request, you can use the Table E070 where you can Input the Request Number and get the Owner of the Request. Set the same in the User Name Field and Skip First Screen (SE09 Transaction).
    Hope it was helpful.
    Thanks and Regards,
    Venkat Phani Prasad Konduri

  • How to skip the first screen in se38

    hi experts,
       I am struck up somewhere in getters and setters in field symbols.
    I am setting the file name field in se38 and trying to directly go to display mode of the program and i am doing that through  RS_SPOOL_ACCESS . I am not able to skip the first screen of se38 and go to diplay mode of the program.
    How can i do that. Skip first screen is not working.

    If all else fails,  partial BDC may be in order.
    report zrich_0003
           no standard page heading line-size 255.
    data:   bdcdata type table of bdcdata with header line.
    parameters: p_prog(30) type c.
    start-of-selection.
      perform bdc_dynpro      using 'SAPLWBABAP' '0100'.
      perform bdc_field       using 'BDC_CURSOR'
                                    'RS38M-PROGRAMM'.
      perform bdc_field       using 'BDC_OKCODE'
                                    '=SHOP'.
      perform bdc_field       using 'RS38M-PROGRAMM'
                             p_prog.
      perform bdc_field       using 'RS38M-FUNC_EDIT'
                                    'X'.
      call transaction 'SE38' using bdcdata mode 'E'.
    *        Start new screen                                              *
    form bdc_dynpro using program dynpro.
      clear bdcdata.
      bdcdata-program  = program.
      bdcdata-dynpro   = dynpro.
      bdcdata-dynbegin = 'X'.
      append bdcdata.
    endform.
    *        Insert field                                                  *
    form bdc_field using fnam fval.
      clear bdcdata.
      bdcdata-fnam = fnam.
      bdcdata-fval = fval.
      append bdcdata.
    endform.
    Regards,
    Rich Heilman

  • CALL transaction using itab aswell as skip the first screen

    Hi All,
    I am doin BDC for some Ztransaction and i am that transaction using CALL TRANSACTION... but i want to skip the first screen of the Ztransaction as well as pass the Itab .. mode .. update and message table.... how can i do it...
    CALL TRANSACTION Z... USING iTAB UPDATE DATE MODE A  message bdcmsgcoll AND skip THE FIST SCREEN.. how to acheive it....

    PERFORM BDC_DYNPRO      TABLES BDCDATA
                           USING 'SAPLBPT1' '0100'.
    *PERFORM BDC_FIELD       TABLES BDCDATA
                           USING 'BDC_CURSOR'
                                 'BCONTD-BPCONTACT'.
    *PERFORM BDC_FIELD       TABLES BDCDATA
                           USING 'BDC_OKCODE'
                                 '/00'.
    *PERFORM BDC_FIELD       TABLES BDCDATA
                           USING 'BCONTD-BPCONTACT'
                                  V_CONTRACT.
    the above code /recording call the first screen 100 which i dont want...
    below code / recording is for screen 200 which i want to appear directly when i call the transaction....
    skipping the first screen 100..
    PERFORM BDC_DYNPRO      TABLES BDCDATA
                            USING 'SAPLBPT1' '0200'.
    PERFORM BDC_FIELD       TABLES BDCDATA
                            USING 'BDC_OKCODE'
                                  '=SAVE'
    PERFORM BDC_FIELD       TABLES BDCDATA
                            USING 'BCONTD-PARTNER'
                                   V_GPART.
    PERFORM BDC_FIELD       TABLES BDCDATA
                            USING 'BCONTD-ADDINFO'
                                   V_ZONE.         "ZONE(S,N,E,E,NE)
    PERFORM BDC_FIELD       TABLES BDCDATA
                            USING 'BDC_CURSOR'
                                  'EENO_DYNP-ZEILE(01)'.
    PERFORM BDC_FIELD       TABLES BDCDATA
                             USING 'EENO_DYNP-ZEILE(01)'
                                   V_LOG.                 "MESSAGE
    CALL TRANSACTION 'BCT1'    USING BDCDATA
                               MODE MODE UPDATE UPDATE
                               MESSAGES INTO IT_BDCMSGCOLL.

  • Can we skip the first screen after call transaction has been performed?

    Hello Friends,
    I have written a program for INTERCATIVE REPORT .
    When i click on the link it needs to call transcation MD4C.
    I have written a BDC for calling the transaction and skipped first screen.Its working fine but the problem is that WHEN I TRY TO COME BACK TO MY REPORT OUTPUT USING(BACK OR EXIT OR CANCEL) BUTTONS THE CONTROL IS PASSING THRU THE FIRST SCREEN OF TRANSACTION MD4C and then its coming back to report output.
    Now i dont need the first screen of the MD4C to be dispalyed when i use the BUTTONS.
    That means i want to dirctly come to report output when i click (BACK OR EXIT OR CANCEL) BUTTONS.
    Hope the problem is clear.
    Is there any way?
    Please do suggest me.
    Thankx in advance,
    Sanghamitra.

    Hello everybody,
    Thanks a lot for the quick replies.
    The problem i m facing comes after the call transaction statement gets executed.
    when the statement gets executed i m able to skip first screen and goto the required screen in the transaction but WHEN I PRESS BACK BUTTON THERE it is showing the initial screen which i have skipped.I dont want this scrren to be dispalyed.When i press back it should directly take me to the report output from where i have come to this transaction.
    Hope i m clear now?
    Any suggestions.
    Regards,
    Sanghamitra.

  • Can I allow two attempts and after the first attempt have a new window open to a url?

    I would like to allow the user two attempts to answer a question. However, after the first attempt, if they get it wrong, I would like a new window to open that takes them to a tutorial Web site we have, where they can find the answer. Then I would like them to be able to close that window and return to the question for the second attempt?
    Is this possible?
    Right now, I have designed a very clunky version of this. I have one question slide with one attempt and if they answer wrong, they go to the next slide, which has a button to the tutorial page. Then the same question slide is repeated, again with one attempt. In this same scenario, if the person got the question right the first time, they moved on to a new question slide. This works, but is bad for scoring and eliminates the possibility of using question pools and putting questions in random order.
    Thanks,
    Carrie

    100 feet would normally not be a problem......if the AirPorts have line-of-sight with each other......but if there are obstructions like walls, ceilings or furniture in the direct signal path between the AirPorts, little if any of the signal will even reach the extending AirPort.
    Try locating the extending AirPort at about 50-60 feet away to see if can pick up a stronger signal to extend.
    It would be much better if you connect the AirPorts using an Ethernet cable, as there is no signal loss in an Ethernet cable up to 300+ feet.

  • Can we edit webi and deski reports and save the changes?

    Can we edit webi and deski reports and save the changed values for a particular column?
    If yes what rights should be granted to particular user?
    Will the report changes reflect at database end also?

    Both Web Intelligence and Desktop Intelligence comes with designers, where you have a GUI to design reports. 
    Web Intelligence you'd design in InfoView using the DHTML Report Panel or the applet-based Java Reporting Panel.
    Desktop Intelligence you'd use the Desktop Intelligence client.
    ReportEngine Java SDK (REBean) is what you'd use to programmatically create/modify Web Intelligence Documents.
    Desktop Intelligence Reporter COM SDK is what you'd use to programmatically create/modify Desktop Intelligence Documents.
    Sincerely,
    Ted Ueda

  • Information Broadcasting ( Automatically execute a report and e-mail it)

    Hi,
    Can BEx Automatically execute a report and e-mail it. The requirement is to Execute a Report periodically  and send the report in <b>EXCEL SHEET</b> format to the given e-mail ID.
    I have tried configuring it in HTML format.... but I need it EXCEL format.
    Waiting for help from the SDN community...
    Thanks in Advance.....

    Hi,
    You can send the workbook automatically when you schedule thru information broadcaster.
    But you have to install precalculation server for distributing workbook..
    Have a look at OSS note 760775 ..
    Hope it helps..
    Regards,
    Siva.

  • Keyboard can't type soe letters and relaces the with strange series of other letters. beachball constantly. beqrtwt 16 gb rabcvxz . idk what to do. lease help0.

    Problem description:
    keyboard can’t type soe letters and relaces the with strange series of other letters. beachball all the tie. 16 gb rabcvxz . idk what to do. lease help0.
    EtreCheck version: 2.0.6 (91)
    Report generated October 25, 2014 at 3:36:04 PM EDT
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,2
      1 2.5 GHz Intel Core i5 CPU: 2-core
      16 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1333 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 -
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 0:37:54
    Disk Information: ℹ️
      APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MACINTOSH HD (disk1) /  [Startup]: 498.88 GB (475.08 GB free)
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.livescribe.kext.LivescribeSmartpen (1) Support
    Launch Daemons: ℹ️
      [running] com.livescribe.PenCommService.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
    User Launch Agents: ℹ️
      [loaded] com.littleknownsoftware.MailPluginTool-Startup.plist Support
      [loaded] com.littleknownsoftware.MailPluginTool-Watcher.plist Support
    User Login Items: ℹ️
      LivescribeHelper Application (/Applications/Livescribe Helper.app/Contents/MacOS/LivescribeHelperAutoLaunch.app)
    Internet Plug-ins: ℹ️
      Default Browser: Version: 600 - SDK 10.10
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
    3rd Party Preference Panes: ℹ️
      None
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          13% Safari
          8% parentalcontrolsd
          5% WindowServer
          1% com.apple.Safari.SearchHelper
          1% launchd
    Top Processes by Memory: ℹ️
      155 MB Safari
      103 MB mds_stores
      103 MB Contacts
      93 MB com.apple.WebKit.WebContent
      86 MB Spotlight
    Virtual Memory Information: ℹ️
      10.43 GB Free RAM
      4.80 GB Active RAM
      696 MB Inactive RAM
      1.24 GB Wired RAM
      1.02 GB Page-ins
      0 B Page-outs

    Thanks, I'm typing this message from an external keyboard borrowed from one of my schools iMac. It is working fine so could this be a serious hardware issue? I upgraded the RAM from 4 gb to 16 gb thinking that would solve the slowness/beachball issue but it didn't. Could it possibly be a faulty SATA cable or time to upgrade my hard drive as well?
    I'm feeling like this is beyond my reach and do not want to damage my MBP further. I'll shut it down and take it to the tech store on campus and hope they have mercy on my wallet. Thanks for the help.

  • How to run the report and show the output in excel file

    salam
    how to run the report and show the output in excel file,
    how to run the report and print the o/p via printer
    how to run the report and send the o/p via mail
    thank u all

    Hi,
    There are Parameters DESTTYPE, DESFORMAT and DESNAME. You can set these parameters to get as you want.
    1) Output in Excel File
         ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
         ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
         ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_name>.XLS');2) output to printer
         ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PRINTER');
         ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<printer_name>');3) Email - Have to configure SMTP and all. ( i didn't checked it)
         ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'MAIL');
         ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<email_id>');Regards,
    Manu.
    If this answer is helpful or correct, please mark it. Thanks.

  • Hello, I'm from Ecuador. Do you have any annual plan? Can I have a report of all the calls made?

    Hello, I’m from Ecuador I would like to contract a service to call landlines. How much it cost? How many minutes to call I dispose? Do you have any annual plan? Is it possible to record the calls and Can I have a report of all the calls realized?

    Hi to all Skypers in Equador! We have different options, so to help you choose, can you please tell us which country you will be calling most, is is landlines in Equador? A) If you are calling primarily in Equador, we have different subscriptions to call landlines: >> 60 minutes per month for landlines to Equador; the cost for this is US $5.99 monthly>> 120 minutes per month for landlines to Equador; the cost is  US $10.79 monthly B) You can pay monthly or if you want, you can pay for 3 months and have 5% discountAnd if you want to pay for 12 months, you will have 15% discount C) You can access your calling history (Date & Time of the call, Number called, Usage) at any time by logging with your account on Skype.com then click on "My Usage" I hope this helps! Keep Skyping!

  • Can i view customer report as per the business area wise , region-wise how?

    can i view customer report as per the business area wise , region-wise how?

    Hi,
    You can view the report business area wise, extract the report and go to dynamic selection and selection business area. When the report is display just sub total on business area. System is showing report as per your requirement.
    Regards,
    Pankaj

  • Automatic scheduling of report and send the output  to user via email

    Good Morning,
    Please i need to scheduled report and send the output via email in Discoverer . Please can someone assist in how to achieve this ?

    Hi,
    You cannot schedule and email a Discoverer report using standard Discoverer scheduling. You have to use a third party scheduler and Discoverer Desktop running on a windows PC.
    This presentation has some more details on how to do this.
    Rod West

Maybe you are looking for