Calling a transaction and skipping the first screen
Dear forumers,
In my report program, I will need to call a custom transaction with skipping the first screen.
And, this custom transaction is created from a query.
Currently, the codes look like below:-
SET PARAMETER ID: 'BUK' FIELD w_output-bukrs,
'AN1' FIELD w_output-anln1.
CALL TRANSACTION 'ZCUSTQ' AND SKIP FIRST SCREEN.
Everything works perfectly alright except for one thing: The first screen is not skipped. When the custom transaction is called, the first screen is still displayed to the user.
Additionally, I also found out that the "SKIP FIRST SCREEN" does not work because the screen's next screen number is the same. This means the screen 1000's next screen is 1000 as well.
(See notes in italics below)
Does anyone have any ideas on how to resolve this? Please help.
This addition suppresses the display of a screen of the initial dynpro of a called dialog transaction. The addition AND SKIP FIRST SCREEN suppresses the first screen under these prerequisites:
For the initial dynpro, in the Screen Painter the own dynpro number must not be specified as the next screen number.
All mandatory input fields of the initial dynpro must be filled completely and with the correct values by the SPA/GPA parameters
If these prerequisites are met, that screen of the dynpro is displayed that is specified in the Screen Painter as the next dynpro of the initial dynpro.
For Any Query , if you want to create the Transaction you need to use the Tcode START_REPORT
in general it will skip the first Transaction codes selection screen , Not your query reports selection screen.
I checked and verfied...
Steps to verify the issue..
1.Go to SE93 ,Now you will go for parametric transaction.
2. give the Transaction as START_REPORT, there you will have option Skip Initial Screen. You uncheck that.
3. Now give all information related to your query.
and see the effect
call TRANSACTION 'YYTCODE AND SKIP FIRST SCREEN.
This will always trying to skip the First transaction's selection/initial screen , Not your Query selection screen.
You also try to check and let me know.
Similar Messages
-
Can I execute a report and skip the first screen in CJE0
I'm trying to call transaction CJE0 and skip the first screen. The report name I'm assigning to the PID REI appears in the screen field, but you have to click execute to continue to the report.
Is there something I'm missing.
Thanks
KarenI've tried using the following code to run project reports without having to select the report name and exectue, but it is still leaving the user on the screen for CJE0 with the correct report name, but it's not skipping the screen and executing the report. Can you see what I'm doing wrong.
Thank-you for your help
Karen
Code -
data begin of bdcdata occurs 100.
include structure bdcdata.
data end of bdcdata.
data begin of itab occurs 10.
include structure bdcmsgcoll.
data end of itab.
data program like sy-repid.
program = '11ERL1A'.
bdcdata-program = 'SAPMKCEE'.
bdcdata-dynpro = '0500'.
bdcdata-dynbegin = 'X'.
append bdcdata. clear bdcdata.
bdcdata-fnam = 'RKB1D-REPID'.
bdcdata-fval = program.
append bdcdata. clear bdcdata.
call transaction 'CJE0' using bdcdata mode 'N'
messages into itab. -
CALL transaction using itab aswell as skip the first screen
Hi All,
I am doin BDC for some Ztransaction and i am that transaction using CALL TRANSACTION... but i want to skip the first screen of the Ztransaction as well as pass the Itab .. mode .. update and message table.... how can i do it...
CALL TRANSACTION Z... USING iTAB UPDATE DATE MODE A message bdcmsgcoll AND skip THE FIST SCREEN.. how to acheive it....PERFORM BDC_DYNPRO TABLES BDCDATA
USING 'SAPLBPT1' '0100'.
*PERFORM BDC_FIELD TABLES BDCDATA
USING 'BDC_CURSOR'
'BCONTD-BPCONTACT'.
*PERFORM BDC_FIELD TABLES BDCDATA
USING 'BDC_OKCODE'
'/00'.
*PERFORM BDC_FIELD TABLES BDCDATA
USING 'BCONTD-BPCONTACT'
V_CONTRACT.
the above code /recording call the first screen 100 which i dont want...
below code / recording is for screen 200 which i want to appear directly when i call the transaction....
skipping the first screen 100..
PERFORM BDC_DYNPRO TABLES BDCDATA
USING 'SAPLBPT1' '0200'.
PERFORM BDC_FIELD TABLES BDCDATA
USING 'BDC_OKCODE'
'=SAVE'
PERFORM BDC_FIELD TABLES BDCDATA
USING 'BCONTD-PARTNER'
V_GPART.
PERFORM BDC_FIELD TABLES BDCDATA
USING 'BCONTD-ADDINFO'
V_ZONE. "ZONE(S,N,E,E,NE)
PERFORM BDC_FIELD TABLES BDCDATA
USING 'BDC_CURSOR'
'EENO_DYNP-ZEILE(01)'.
PERFORM BDC_FIELD TABLES BDCDATA
USING 'EENO_DYNP-ZEILE(01)'
V_LOG. "MESSAGE
CALL TRANSACTION 'BCT1' USING BDCDATA
MODE MODE UPDATE UPDATE
MESSAGES INTO IT_BDCMSGCOLL. -
How to skip the first screen in se38
hi experts,
I am struck up somewhere in getters and setters in field symbols.
I am setting the file name field in se38 and trying to directly go to display mode of the program and i am doing that through RS_SPOOL_ACCESS . I am not able to skip the first screen of se38 and go to diplay mode of the program.
How can i do that. Skip first screen is not working.If all else fails, partial BDC may be in order.
report zrich_0003
no standard page heading line-size 255.
data: bdcdata type table of bdcdata with header line.
parameters: p_prog(30) type c.
start-of-selection.
perform bdc_dynpro using 'SAPLWBABAP' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RS38M-PROGRAMM'.
perform bdc_field using 'BDC_OKCODE'
'=SHOP'.
perform bdc_field using 'RS38M-PROGRAMM'
p_prog.
perform bdc_field using 'RS38M-FUNC_EDIT'
'X'.
call transaction 'SE38' using bdcdata mode 'E'.
* Start new screen *
form bdc_dynpro using program dynpro.
clear bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
append bdcdata.
endform.
* Insert field *
form bdc_field using fnam fval.
clear bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
append bdcdata.
endform.
Regards,
Rich Heilman -
When the user click on the request number it should skip the first screen o
when the user click on the request number it should skip the first screen of REV track and show the rev track request number details. On click of u201CBacku201D button on this screen the output screen of the report should be displayed again.
Hello Rohit,
What you can do is, when the User Clicks on any particular Request, you use the At Line-Selection Event. In that event, you can set the User Name to default "SY-UNAME" or any other user Name for the specific Request.
Again, if you want to check the Owner of the Request, you can use the Table E070 where you can Input the Request Number and get the Owner of the Request. Set the same in the User Name Field and Skip First Screen (SE09 Transaction).
Hope it was helpful.
Thanks and Regards,
Venkat Phani Prasad Konduri -
Urgent: Reports: Skip the first screen
Hi experts,
In report program iam calling another program screen. I just want to skip the first screen of the calling program and when i call this program i should directly go into the output screen. Iam using like this. So how should i skip the first screen.
Please do needful help.
if p_err_u = 'X'.
submit rsuniscan_final. "VIA SELECTION-SCREEN AND RETURN.
Regards.
AADIUse in Submit
[USING SELECTION-SET variant]
[USING SELECTION-SETS OF PROGRAM prog]
[WITH SELECTION-TABLE rspar]
Santhosh -
Can we skip the first screen after call transaction has been performed?
Hello Friends,
I have written a program for INTERCATIVE REPORT .
When i click on the link it needs to call transcation MD4C.
I have written a BDC for calling the transaction and skipped first screen.Its working fine but the problem is that WHEN I TRY TO COME BACK TO MY REPORT OUTPUT USING(BACK OR EXIT OR CANCEL) BUTTONS THE CONTROL IS PASSING THRU THE FIRST SCREEN OF TRANSACTION MD4C and then its coming back to report output.
Now i dont need the first screen of the MD4C to be dispalyed when i use the BUTTONS.
That means i want to dirctly come to report output when i click (BACK OR EXIT OR CANCEL) BUTTONS.
Hope the problem is clear.
Is there any way?
Please do suggest me.
Thankx in advance,
Sanghamitra.Hello everybody,
Thanks a lot for the quick replies.
The problem i m facing comes after the call transaction statement gets executed.
when the statement gets executed i m able to skip first screen and goto the required screen in the transaction but WHEN I PRESS BACK BUTTON THERE it is showing the initial screen which i have skipped.I dont want this scrren to be dispalyed.When i press back it should directly take me to the report output from where i have come to this transaction.
Hope i m clear now?
Any suggestions.
Regards,
Sanghamitra. -
CALL TRANSACTION AND SKIP FIRST SCREEN to specified tab in TCODE 'IW32'
Hi,
I am using CALL TRANSACTION AND SKIP FIRST SCREEN in ALV Grid Report to call IW32 tcode and it goes to tcode skipping the first screen. But it goes to the default header tab in the tab control. Whereas I wish to go to the specified tab 'OPERATIONS'.
Can any one help me, as to how to resolve this issue ?
Thanks in advance.Sridher,
I have the similar requirement. but in my case its COSTS tab. Could you please provide the code you have used for this to work?
I used standard "call transaction with mode 'E' ". This seems to be working but I am not pleased by my effort. Is there any proper way that you might have followed ?
Greatly appreciated your help.
Regards,
Reddy -
Skip the selection screen using BDCTAB call transaction
Hi experts,
I am using BDCTAB for call transaction SWI1 I need to skip the selection screen. Can you please tell me how to skip the selection screen using BDC call transaction?
Thank you in advance.....hi,
the first step is to pass some values to the selection screen, at least Date From and Date To; otherwise, it´ll take a long time. The second step is to emulate the Execute button, which is done with '/08'.
PERFORM fields USING 'BDC_OKCODE' '/08'.
Third step is to catch the programme and screen number. -
Question
Cannot log in to Nationwide internet banking. I get the front page but Login says internet banking is not working. Next screen says it's ok and sends you back to the first screen, which says it isn't. Works throughInternet explorerThat issue can be caused by corrupted cookies.
*https://support.mozilla.org/kb/Cannot+log+in+to+websites
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
so im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?
This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs? -
How to quickly pick up a 2nd call and drop the first call
If I am on a phone call, and then a second call comes in, then how can I quickly pick up the second call and DROP the first call? I can do it if I put the first call on hold but then I have two calls going. If I simply END the first call, then it takes 5 or 6 seconds for the second call to come in. Several times I have lost the second call because it took too long to transition over.
never mind i did a direct chat with a skype rep and got my answer which is no.
-
My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now
Hello Nadersalah,
It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPhone Repair and Service - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
i have an old macbook, i just installed the newest version of iTunes and it opens but before i can accept on the first screen, an error pops up (-45054), help me please!?
Did you try to uninstall and reinstall the iTunes back in?
-
Error when calling a popup window in the initial screen of an application
Hi,
I am calling a popup window in the Initial screen to select the variant list.
I am getting an error reference to Null Object reference.
Here is the Error.
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception CX_SY_REF_IS_INITIAL
Date and Time 15.06.2007 10:00:16
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WDR_MESSAGE_AREA===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "SUPPLY_VIEW_DATA" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
"CL_WDR_MESSAGE_AREA===========CP" or "CL_WDR_MESSAGE_AREA===========CM00Q"
"SUPPLY_VIEW_DATA"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SUPPLY_VIEW_DATA" "(METHOD)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
To prevent the exception, note the following:
Looking for Ur valuable suggestions.
Cheers,
SamHi Sam,
The correct code for creating a popup window will be:
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
data lo_window type ref to if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window = lo_window_manager->create_window(
window_name = 'WINDOW_NAME'
* title =
* close_in_any_case = abap_true
message_display_mode = if_wd_window=>co_msg_display_mode_selected
* close_button = abap_true
button_kind = if_wd_window=>co_buttons_okcancel
message_type = if_wd_window=>co_msg_type_none
default_button = if_wd_window=>co_button_ok
lo_window->open( ).
Hope this helps.
Regards,
Ram
Maybe you are looking for
-
How to log in to VC as known user?
When I connect to a VC server from bridge, it only asks for a URL, not a username. If I try to put a username in the URL it just refuses to connect. Because everything on this server requires a login, and it doesn't know who I am, nothing is visible
-
How to run the APD programmatically with different query variables
Hi All I have a requirement to run a APD with a query in it programmatically on a series of posting periods from 1 to 10 I want to run the APD once for each posting period. Any idea how I can do this. Thanks Karen
-
How to retrieve all imported certificates in my app?
I am able to import certificates but i am struggling to retrieve them . How can i achieve this ? 19karabo91
-
Hewlett-Packard 786D7 v01.02 BIOS Update
Hi, I've installed an nvidia geforce gtx 560 ti graphics card into my son's HP xw4400 Workstation as a Xmas present and I get the following error message: "Your computer's system firmware does not include enough information to properly configure and
-
Request for an example of the instance.properties file
Hi everyone, Somebody can give me an example of the file <b>instance.properties</b> ? : When I installed sap netweaver 2004s SP 9 , this file was not created in its place It caused me a problem (the SAP J2EE engine does not working). I want to solve