How to skip the first screen in se38

hi experts,
I am struck up somewhere in getters and setters in field symbols.
I am setting the file name field in se38 and trying to directly go to display mode of the program and i am doing that through RS_SPOOL_ACCESS . I am not able to skip the first screen of se38 and go to diplay mode of the program.
How can i do that. Skip first screen is not working.

If all else fails, partial BDC may be in order.
report zrich_0003
       no standard page heading line-size 255.
data:   bdcdata type table of bdcdata with header line.
parameters: p_prog(30) type c.
start-of-selection.
perform bdc_dynpro      using 'SAPLWBABAP' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                                'RS38M-PROGRAMM'.
perform bdc_field       using 'BDC_OKCODE'
                                '=SHOP'.
perform bdc_field       using 'RS38M-PROGRAMM'
                         p_prog.
perform bdc_field       using 'RS38M-FUNC_EDIT'
                                'X'.
call transaction 'SE38' using bdcdata mode 'E'.
*        Start new screen                                              *
form bdc_dynpro using program dynpro.
clear bdcdata.
bdcdata-program = program.
bdcdata-dynpro   = dynpro.
bdcdata-dynbegin = 'X'.
append bdcdata.
endform.
*        Insert field                                                  *
form bdc_field using fnam fval.
clear bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
append bdcdata.
endform.
Regards,
Rich Heilman

Similar Messages

Calling a transaction and skipping the first screen

Dear forumers,
In my report program, I will need to call a custom transaction with skipping the first screen.
And, this custom transaction is created from a query.
Currently, the codes look like below:-
        SET PARAMETER ID: 'BUK' FIELD w_output-bukrs,
                          'AN1' FIELD w_output-anln1.
        CALL TRANSACTION 'ZCUSTQ' AND SKIP FIRST SCREEN.
Everything works perfectly alright except for one thing: The first screen is not skipped. When the custom transaction is called, the first screen is still displayed to the user.
Additionally, I also found out that the "SKIP FIRST SCREEN" does not work because the screen's next screen number is the same. This means the screen 1000's next screen is 1000 as well.
(See notes in italics below)
Does anyone have any ideas on how to resolve this? Please help.
This addition suppresses the display of a screen of the initial dynpro of a called dialog transaction. The addition AND SKIP FIRST SCREEN suppresses the first screen under these prerequisites:
For the initial dynpro, in the Screen Painter the own dynpro number must not be specified as the next screen number.
All mandatory input fields of the initial dynpro must be filled completely and with the correct values by the SPA/GPA parameters
If these prerequisites are met, that screen of the dynpro is displayed that is specified in the Screen Painter as the next dynpro of the initial dynpro.

For Any Query , if you want to create the Transaction you need to use the Tcode START_REPORT
in general it will skip the first Transaction codes selection screen , Not your query reports selection screen.
I checked and verfied...
Steps to verify the issue..
1.Go to SE93 ,Now you will go for parametric transaction.
2. give the Transaction as START_REPORT, there you will have option Skip Initial Screen. You uncheck that.
3. Now give all information related to your query.
and see the effect
call TRANSACTION 'YYTCODE AND SKIP FIRST SCREEN.
This will always trying to skip the First transaction's selection/initial screen , Not your Query selection screen.
You also try to check and let me know.

CALL transaction using itab aswell as skip the first screen

Hi All,
I am doin BDC for some Ztransaction and i am that transaction using CALL TRANSACTION... but i want to skip the first screen of the Ztransaction as well as pass the Itab .. mode .. update and message table.... how can i do it...
CALL TRANSACTION Z... USING iTAB UPDATE DATE MODE A message bdcmsgcoll AND skip THE FIST SCREEN.. how to acheive it....

PERFORM BDC_DYNPRO      TABLES BDCDATA
                       USING 'SAPLBPT1' '0100'.
*PERFORM BDC_FIELD       TABLES BDCDATA
                       USING 'BDC_CURSOR'
                             'BCONTD-BPCONTACT'.
*PERFORM BDC_FIELD       TABLES BDCDATA
                       USING 'BDC_OKCODE'
                             '/00'.
*PERFORM BDC_FIELD       TABLES BDCDATA
                       USING 'BCONTD-BPCONTACT'
                              V_CONTRACT.
the above code /recording call the first screen 100 which i dont want...
below code / recording is for screen 200 which i want to appear directly when i call the transaction....
skipping the first screen 100..
PERFORM BDC_DYNPRO      TABLES BDCDATA
                        USING 'SAPLBPT1' '0200'.
PERFORM BDC_FIELD       TABLES BDCDATA
                        USING 'BDC_OKCODE'
                              '=SAVE'
PERFORM BDC_FIELD       TABLES BDCDATA
                        USING 'BCONTD-PARTNER'
                               V_GPART.
PERFORM BDC_FIELD       TABLES BDCDATA
                        USING 'BCONTD-ADDINFO'
                               V_ZONE.         "ZONE(S,N,E,E,NE)
PERFORM BDC_FIELD       TABLES BDCDATA
                        USING 'BDC_CURSOR'
                              'EENO_DYNP-ZEILE(01)'.
PERFORM BDC_FIELD       TABLES BDCDATA
                         USING 'EENO_DYNP-ZEILE(01)'
                               V_LOG.                 "MESSAGE
CALL TRANSACTION 'BCT1'    USING BDCDATA
                           MODE MODE UPDATE UPDATE
                           MESSAGES INTO IT_BDCMSGCOLL.

Urgent: Reports: Skip the first screen

Hi experts,
   In report program iam calling another program screen. I just want to skip the first screen of the calling program and when i call this program i should directly go into the output screen. Iam using like this. So how should i skip the first screen.
Please do needful help.
if p_err_u = 'X'.
submit rsuniscan_final. "VIA SELECTION-SCREEN AND RETURN.
Regards.
AADI

Use in Submit
   [USING SELECTION-SET variant]
    [USING SELECTION-SETS OF PROGRAM prog]
    [WITH SELECTION-TABLE rspar]
Santhosh

Can I execute a report and skip the first screen in CJE0

I'm trying to call transaction CJE0 and skip the first screen. The report name I'm assigning to the PID REI appears in the screen field, but you have to click execute to continue to the report.
Is there something I'm missing.
Thanks
Karen

I've tried using the following code to run project reports without having to select the report name and exectue, but it is still leaving the user on the screen for CJE0 with the correct report name, but it's not skipping the screen and executing the report. Can you see what I'm doing wrong.
Thank-you for your help
Karen
Code -
data begin of bdcdata occurs 100.
         include structure bdcdata.
data end of bdcdata.
data begin of itab occurs 10.
         include structure bdcmsgcoll.
data end of itab.
data program like sy-repid.
program = '11ERL1A'.
bdcdata-program = 'SAPMKCEE'.
bdcdata-dynpro   = '0500'.
bdcdata-dynbegin = 'X'.
append bdcdata. clear bdcdata.
bdcdata-fnam     = 'RKB1D-REPID'.
bdcdata-fval     = program.
append bdcdata. clear bdcdata.
   call transaction 'CJE0' using bdcdata mode 'N'
                           messages into itab.

When the user click on the request number it should skip the first screen o

when the user click on the request number it should skip the first screen of REV track and show the rev track request number details. On click of u201CBacku201D button on this screen the output screen of the report should be displayed again.

Hello Rohit,
What you can do is, when the User Clicks on any particular Request, you use the At Line-Selection Event. In that event, you can set the User Name to default "SY-UNAME" or any other user Name for the specific Request.
Again, if you want to check the Owner of the Request, you can use the Table E070 where you can Input the Request Number and get the Owner of the Request. Set the same in the User Name Field and Skip First Screen (SE09 Transaction).
Hope it was helpful.
Thanks and Regards,
Venkat Phani Prasad Konduri

How to skip the first row in Text file (in Sql Loader)

Hi All,
How to say the control file to skip the first row of the text file..
i just going this example
this is my text file:
01308201222455038130820122245503813082012224550382
1090358 474661834012245503813082012 0075 0 00000000000 000000000 00000130820120000000000000000 136.84 -833.3911082012 000000 000 009035847466183 090358 47466183 0015007514300000970001430000097700BH1150274792012081320120811201208122012-08-11-22.45.50.38369899999.0075LIQJGL17
Control file:
OPTIONS
DIRECT = TRUE ,
PARALLEL = FALSE ,
SKIP = 1,
ERRORS = 0
UNRECOVERABLE
LOAD DATA
INFILE <"FILE_DIR">
BADFILE <"FILE_DIR">
INSERT
INTO TABLE DAILY_TRANSACTION
WHEN (1:1)='D'
TRAILING NULLCOLS
Above the Eaxmple text file i need to Skip the first row which is
01308201222455038130820122245503813082012224550382
please can anyone suggest me is this correct?
if not please correct me please
since two days i been serching but i didn't get any thing
Thank's
Edited by: Lavanya on 24-Sep-2012 00:51

Lavanya wrote:
Hi Jeneesh,
Thank you for your prompt replay
I didn't try to load this control file
And i need one more question
I have Text file in my Machine which Contains very huge data so i was wrote one control file for that, and i got FTP connection also as well as.
My question is firstly I need to PUT the Text file Into Unix Server isn't?
so when i trying to put the text file into unix it's giving an error
ftp>put c:/abc.txt
Not connectedYou haven't succesfully made your FTP connection to the server.
e.g.
c:\>ftp
ftp> o testserver
Connected to testserver.mycompany.com.
220 testserver FTP server ready.
User (testserver.mycompany.com:(none)): myuser
331 Password required for myuser.
Password:
230 User myuser logged in.
ftp>then you can use FTP to put your data to the server. Remember, if you are transferring a text file from a windows based operating system to a unix server you need to put it in ASCII mode...
ftp> ascii
200 Type set to A.
ftp>which will automatically convert the windows CR/LF pairs to the single LF character used by unix.

Can we skip the first screen after call transaction has been performed?

Hello Friends,
I have written a program for INTERCATIVE REPORT .
When i click on the link it needs to call transcation MD4C.
I have written a BDC for calling the transaction and skipped first screen.Its working fine but the problem is that WHEN I TRY TO COME BACK TO MY REPORT OUTPUT USING(BACK OR EXIT OR CANCEL) BUTTONS THE CONTROL IS PASSING THRU THE FIRST SCREEN OF TRANSACTION MD4C and then its coming back to report output.
Now i dont need the first screen of the MD4C to be dispalyed when i use the BUTTONS.
That means i want to dirctly come to report output when i click (BACK OR EXIT OR CANCEL) BUTTONS.
Hope the problem is clear.
Is there any way?
Please do suggest me.
Thankx in advance,
Sanghamitra.

Hello everybody,
Thanks a lot for the quick replies.
The problem i m facing comes after the call transaction statement gets executed.
when the statement gets executed i m able to skip first screen and goto the required screen in the transaction but WHEN I PRESS BACK BUTTON THERE it is showing the initial screen which i have skipped.I dont want this scrren to be dispalyed.When i press back it should directly take me to the report output from where i have come to this transaction.
Hope i m clear now?
Any suggestions.
Regards,
Sanghamitra.

How to skip the PRINT screen?

Hi All,
I have a report, which calls the Smartform.
When I execute my report, the PRINT screen will appear, where i press the PRINT button, and then the form gets printed.
My requirement.
I dont want this PRINT screen to appear. When i execute the report, the form must get printed, skipping the PRINT screen.
Is there a way to do that?
Thanks
Krishna Kishor Kammaje

Hi,
See the blocked code.
DATA: w_ctrlop TYPE ssfctrlop,
      w_compop TYPE ssfcompop,
      w_return TYPE ssfcrescl,
Variables declarations
      v_form_name TYPE rs38l_fnam.
call function 'SSF_FUNCTION_MODULE_NAME'
     exporting
          formname           = 'ZZZ_TEST2'
     importing
          fm_name            = v_form_name
     exceptions
          no_form            = 1
          no_function_module = 2
          others             = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
<b>w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.</b>
CALL FUNCTION v_form_name
     EXPORTING
          control_parameters = w_ctrlop
          output_options     = w_compop
          user_settings      = 'X'
     IMPORTING
          job_output_info    = w_return
     EXCEPTIONS
          formatting_error   = 1
          internal_error     = 2
          send_error         = 3
          user_canceled      = 4
          OTHERS             = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
If your problem is solved,kindly reward points and close the thread.Otherwise,get back.

How to skip the Selection screen completely for certain users?

Hi All,
   I want to skip the entire selection screen based on sy-uname. I check if the sy-uname has sufficient authorization and based on that..I want to skip the entire selection screen. How do I do that?

Hi Rachna,
use
<b>SUBMIT program
            with sy-uname = 'TEST'
             and return.</b>
If u specify and return the control will come back and execute the next line in the report.
It is giving the output directly without showing the selection screen.
If u r pressing back also it is not showing the selction screen.
This will work
Regards
Naresh

How to skip the Selection screen while using BAPI_MATERIAL_DELETE

Hi,
I have to delete material master.
I'm using BAPI_MATERIAL_DELETE Fm,
But while executing this BAPI it is going to a screen where it is asking to tick the Check Box for material number.
Can you please tell me how to execute the BAPI Avoiding the selection screen.
Thanks & Regards,
Rajender

Hi,
Thanks for replying.
We have to run the BAPI in Background, Then how to achieve the default values.
Thanks & Regards,
Rajender.

How to skip the Print Screen List pop-up message with standard T-code?

Dear Experts,
I want to do not see the Print Screen List pop-up message with standard T-code.
Ex, sm66, sm51
click on print button -> Print Screen List pop-up message(SAPGUI) -> print windows dialog (X)
click on print button -> print windows dialog (O)
Is it possible to disappear it?
Thanks,
Lee

Hello Mr.Lee,
If you are refering to the print icon on the toolbar (CTRL+P), then no, it is not possible.
This printer dialog is necessary for front-end printing so you can choose the active printer.
Regards,
Jude

How to Fill the selection screen while calling the transaction

Hi All,
         my requirement is in one of the screen while i will press a push button it will call one transaction and it will fill the selection screen build order number field and skip the first screen i.e the selection screen it will show the output of that report directly.
am using this code .
case sy-ucomm.
while 'FSLR'.
set PARAMETER ID 'ANR' FIELD aufnr.
RANGES s_aufnr FOR afko-aufnr.
      s_aufnr-sign   = 'I'.
      s_aufnr-option = 'EQ'.
      s_aufnr-low    = aufnr.
      APPEND s_aufnr.
CALL TRANSACTION 'ZFS1' USING s_aufnr
     MODE 'E' .
    AND SKIP FIRST SCREEN.
endcase.
here the problem is i cant use both skip screen and using at a time nither the screen is filling nor its skipping the first screen.
but its not working would any one please help how can i do this functionality?

Hi
Do in this way.
DATA: rspar TYPE TABLE OF rsparams WITH HEADER LINE.
rspar-selname = 'S_AUFNR'.
rspar-kind = 'S'.
rspar-sign = 'I'.
rspar-option = 'EQ'.
rspar-low = 'aufnr'.
APPEND rspar.
SUBMIT zfs1_prog VIA SELECTION-SCREEN WITH SELECTION-TABLE rspar AND RETURN.
If this doesnt suit yer requirement, I wud suggest you to use BDC as below.
CALL TRANSACTION 'SE11' USING bdcdata
                       MODE   'E'
                       UPDATE 'A'.

Skip the selection screen using BDCTAB call transaction

Hi experts,
I am using BDCTAB for call transaction SWI1 I need to skip the selection screen. Can you please tell me how to skip the selection screen using BDC call transaction?
Thank you in advance.....

hi,
the first step is to pass some values to the selection screen, at least Date From and Date To; otherwise, it´ll take a long time. The second step is to emulate the Execute button, which is done with '/08'.
PERFORM fields USING 'BDC_OKCODE' '/08'.
Third step is to catch the programme and screen number.

So im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

so im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

How to skip the first screen in se38

Similar Messages

Maybe you are looking for