Can I get a matchode in a report parameter?

That's the question. I can't get the matchode in my report. Actually the only way i get it, is building my own matchcode. Is there any way i can get the built-in matchode? I'm also interested in getting one parameter as a listbox, but at the moment i couldn't figure it out.
Thanks

Hi Jose Maria Otero,
just specify the parameter with a type where the Search Help is assigned in the DB table:
i.e.
PARAMETERS:
P_MATNR TYPE MARA-MATNR.
Thats it. You have the standard collective search help.
Regards,
Clemens

Similar Messages

How can I get the second group and report totals in Matrix report?

Hi,
I have created a matrix report with 2 break Groups.
Iam getting columns totals for the first group, but not for the second group and the report totals.
How can I get the second group and report totals for each month?
Thanks.
Ram.

Hi Ram,
If you want a total at any group-level, go to the particular group in the data model, insert a summary column in the group, and select
Reset At > appropriate Group Name
For report level summaries, you must create the summary column outside of all groups.
Navneet.

Imac (early 2009) Slow, display issues and freezing, can anyone get any info from crash report?

Hi,
Just wondering if anyone can provide some insight into why my Imac is constintantly crashing.
Issue:
For as long as I can remember it has been ocassionally freezing. First there are little redish dots in clusters on parts of the screen, then if you move a window, some of the image of the window gets left behind. Then there are moving horozintal lines that come up from the bottom of the screen. You can move the mouse but it wont click on anything.
As of about 6 months ago they crashed became so frequent that sometimes you couldn't get 5 mins out of the computer before it would do it again.
I use photoshop quite a lot but the files are never extraordinaly large.
The top left part of the computer can become really hot.
In an effort to try to resolve it I rang Apple and they got to do something which made it work properly again for 2 days, long enough for me to decide to upgrade to Mavrick. Since upgrading it's been even worse. It's really really slow and in applications like mail its flashing and looking like it's loading the page over and over again, starting with the bottom of the page and the bottom colour. Mail searh is also not working. It then freezes again.
Mostly it freezes, and doesn' t crash so I have to restart it myself, so it's not reporting it as a crash.
Today it did crash, I was wondering if anyone can figure out whats wrong the the report below?
Thanks!
Wed Feb 12 14:22:04 2014
panic(cpu 0 caller 0xffffff7f88583552): NVRM[0/2:0:0]: Read Error 0x00001604: CFG 0x00000000 0x00006140 0x00006140, BAR0 0xd2000000 0xffffff80882d7000 0x094700a1, D0, P1/4
Backtrace (CPU 0), Frame : Return Address
0xffffff808760b650 : 0xffffff8007a22f69
0xffffff808760b6d0 : 0xffffff7f88583552
0xffffff808760b790 : 0xffffff7f8864fd9e
0xffffff808760b7d0 : 0xffffff7f888b3d54
0xffffff808760b810 : 0xffffff7f888a8eb7
0xffffff808760b850 : 0xffffff7f886c66ba
0xffffff808760b9a0 : 0xffffff7f886c5a3b
0xffffff808760bab0 : 0xffffff7f88885ed8
0xffffff808760bb60 : 0xffffff7f88886250
0xffffff808760bd00 : 0xffffff7f888cb20f
0xffffff808760be20 : 0xffffff7f88673d41
0xffffff808760be40 : 0xffffff7f8858a08d
0xffffff808760bef0 : 0xffffff8007eada80
0xffffff808760bf30 : 0xffffff8007eac522
0xffffff808760bf80 : 0xffffff8007eac5f7
0xffffff808760bfb0 : 0xffffff8007ad6aa7
      Kernel Extensions in backtrace:
         com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f88532000->0xffffff7f887a1fff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f880ba000
            dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f88522000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f884df000
         com.apple.nvidia.classic.NVDANV50HalTesla(8.1.8)[3666E0FC-87C7-3329-BD8C-2F1ADE D100A4]@0xffffff7f887ac000->0xffffff7f88a58fff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f88532000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f880ba000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x0000000007800000
Kernel text base: 0xffffff8007a00000
System model name: iMac9,1 (Mac-F2218FC8)
System uptime in nanoseconds: 1477295383230
last loaded kext at 277739752297: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f89d7a000, size 65536)
last unloaded kext at 338692832769: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f89d7a000, size 57344)
loaded kexts:
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AGPM          100.14.11
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleHDA          2.5.3fc1
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.driver.AppleMikeyDriver          2.5.3fc1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.7.0
com.apple.GeForceTesla          8.1.8
com.apple.driver.AppleHWAccess          1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleBacklight          170.3.5
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.iokit.SCSITaskUserClient          3.6.0
com.apple.driver.AppleIRController          325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.4.0
com.apple.driver.AppleFWOHCI          4.9.9
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleAHCIPort          2.9.5
com.apple.driver.AppleUSBHub          650.4.4
com.apple.nvenet          2.0.21
com.apple.driver.AppleUSBEHCI          650.4.1
com.apple.driver.AppleUSBOHCI          650.4.1
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleSMBIOS          2.0
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.AppleGraphicsDeviceControl          3.4.12
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.driver.DspFuncLib          2.5.3fc1
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.4fc11
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOSurface          91
com.apple.iokit.IOBluetoothFamily          4.2.0f6
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.IOPlatformPluginFamily          5.5.1d27
com.apple.nvidia.classic.NVDANV50HalTesla          8.1.8
com.apple.driver.AppleSMC          3.1.6d1
com.apple.nvidia.classic.NVDAResmanTesla          8.1.8
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.5.3fc1
com.apple.iokit.IOHDAFamily          2.5.3fc1
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.driver.AppleUSBHIDMouse          180.9
com.apple.driver.AppleHIDMouse          180.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.driver.AppleUSBHIDKeyboard          170.15
com.apple.driver.AppleHIDKeyboard          170.15
com.apple.iokit.IOUSBHIDDriver          650.4.4
com.apple.iokit.IOAHCISerialATAPI          2.6.0
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          650.4.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IO80211Family          600.34
com.apple.iokit.IOAHCIFamily          2.6.0
com.apple.iokit.IOUSBUserClient          650.4.4
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOUSBFamily          650.4.4
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.10
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          21
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.8
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1
Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.37f3
Graphics: NVIDIA GeForce GT 130, NVIDIA GeForce GT 130, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334448312D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334448312D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD1001FALS-40K1B0, 1 TB
Serial ATA Device: PIONEER DVD-RW DVRTS08
USB Device: Built-in iSight
USB Device: Keyboard Hub
USB Device: Apple Optical USB Mouse
USB Device: Apple Keyboard
USB Device: IR Receiver
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:

This is a Kernel Panic report, I cannot see any software related issues, my bst guess it's related to hardware. Common causes of hardware related KPs are RAM
Incorrect RAM
Failed RAM
Unseated RAM
Eliminate each and then re-test. If it's not RAM it could be a failing HD or something else. I would recommend taking the machine in to be looked at by a professional and tested. Take it to your local Apple Store or local AASP.

Can I get the Version a Crystal Report Was Designed Against

Hi,
I'm working on a web application developed in C# using the Crystal Reports runtime 10.5 that came with Visual Studio.
What I am trying to do is to check the version of a Report File that the application is trying to run before actually running it.
So that a Report written in Crystal Reports 11 can be flagged as being potentially incompatiable (as it may contain new features not supported by the runtime).
Is there any way to get this version number in C# code?
Any help would be much appreciated.
Thanks
Steve

Thanks for the reply.
In the application I'm working on people can write and upload their own Crystal Reports. The application then runs these reports for them (also doing other things such as exporting (PDF) and emailing the report).
At the minute, and in past releases the application uses the 10.5.3700.0 runtime. Everything functions fine in the application.
My only concern is that a user could write a report in Crystal 2008 using functionality that is in Crystal 2008 but not supported by the 10.5.3700.0 runtime.
Therefore when a user uploads a report I was hoping to analyse the rpt file to find out what version they used to design the report. Then if it is not designed in version 10, inform them that some functionality may not be supported by the current runtime.
I've had a go through code and found a property called MajorVersion which seemed to be just what I wanted, but it was Non-Public so unfortunately this wasn't available to use.
((CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper)((CrystalDecisions.CrystalReports.Engine.EngineObjectBase)(sInfo)).m_rasRptClientDoc).MajorVersion
I was hoping to go for this solution of warning users rather than compiling using the Crystal 2008 runtime, as updating the runtime may incur a cost to current customers who are happy using 10.5.3700.0.
I hope that is a bit clearer.

Can't get the data in the report

hi all,
i have created a report in SMART FORMS.When i execute it i get all the required but only the VENDOR NAME and VENDOR ACCOUNT NUMBER not displaying.I also use debugger but i cant identified what is the problem in that code.Following are the code:
PARAMETERS:
p_ekorg type ekorg,
p_ekgrp TYPE ekgrp.
SELECT-OPTIONS:
s_ebeln FOR ekko-ebeln,
s_submi FOR ekko-submi.
DATA: BEGIN OF gi_rfq OCCURS 0,
       ematn like ekpo-ematn, "Material Number
       txz01 like ekpo-txz01, "Mareial Description
       menge like ekpo-menge, "Quantity
       netpr like ekpo-netpr, "Rate
       ebeln like ekpo-ebeln, "PO Number
       anfnr LIKE ekpo-anfnr, "RFQ No.
       banfn like ekpo-banfn, "PR Number
       ebelp LIKE ekpo-ebelp,
END OF gi_rfq,
BEGIN OF gi_ekko OCCURS 0,
    BSTYP LIKE ekko-BSTYP,"Purchasing Document Category
    submi LIKE ekko-submi,"Collective Number
    lifnr LIKE ekko-lifnr,"Vendor Number
    name1 like   lfa1-name1,
END OF gi_ekko,
BEGIN OF gi_reqdate OCCURS 0,
       banfn LIKE eban-banfn,"Purchase Requisition Number
       bedat LIKE eban-bedat,"PO Date
       badat LIKE eban-badat,"PR Date
END OF gi_reqdate,,
    gi_main LIKE ekko,
    gi_eban LIKE eban,
    gi_lfa1 LIKE lfa1,
    gi_detail LIKE STANDARD TABLE OF ekpo WITH HEADER LINE.
START-OF-SELECTION.
PERFORM f_get_data.
PERFORM f_orgdata.
PERFORM f_display_report.
FORM f_get_data .
IF sy-subrc EQ 0.
SELECT ematn txz01 menge netpr ebeln anfnr banfn
    INTO CORRESPONDING FIELDS OF TABLE gi_rfq
    FROM ekpo
    WHERE ebeln IN s_ebeln.
    SELECT DISTINCT submi BSTYP lfa1~name1 lfa1~lifnr
     FROM ekko
      INNER JOIN lfa1 ON ekko~lifnr = lfa1~lifnr
     INTO CORRESPONDING FIELDS OF TABLE gi_ekko
     WHERE EBELN IN s_ebeln
     AND   ekorg eq p_ekorg
     AND   ekgrp eq p_ekgrp
     AND   submi in s_submi
     AND   ekko~spras = 'E'.
    SELECT bedat badat
      FROM eban
      INTO CORRESPONDING FIELDS OF TABLE gi_reqdate
      WHERE EBELN IN S_EBELN
      AND   spras = 'E'.
endif.
        endform.
FORM f_orgdata.
LOOP at gi_reqdate.
MOVE gi_reqdate-bedat to gi_eban-bedat.
MOVE gi_reqdate-badat to gi_eban-badat.
ENDLOOP.
code continued as i can write the whole code in that page....

Hi ,
In the code portion , while you loop with GI_RFQ , you need to read the table GI_EKKO with the key field.
In current version of your code , it does not read and taking the value from the work area of internal table GI_EKKO. Thus blank values are transfering to the GI_DETAIL value .
LOOP AT gi_rfq.
       ------> Read the table GI_EKKO based on the key in work are Gi_RFQ.
    MOVE gi_ekko-BSTYP to gi_main-BSTYP.
    MOVE gi_ekko-submi to gi_main-submi.
    MOVE gi_ekko-name1 to gi_lfa1-name1.
    MOVE gi_ekko-lifnr to gi_lfa1-lifnr.
    MOVE gi_rfq-banfn to gi_detail-banfn.
    MOVE gi_rfq-ematn to gi_detail-ematn.
    MOVE gi_rfq-txz01 to gi_detail-txz01.
    MOVE gi_rfq-menge to gi_detail-menge.
    MOVE gi_rfq-netpr to gi_detail-netpr.
    MOVE gi_rfq-ebeln to gi_detail-ebeln.
    MOVE gi_rfq-anfnr to gi_detail-anfnr.
    MOVE gi_rfq-banfn to gi_detail-banfn.
    READ TABLE gi_reqdate WITH KEY banfn = gi_rfq-banfn.
    MOVE gi_reqdate-banfn to gi_eban-banfn.
    MOVE gi_reqdate-bedat to gi_eban-bedat.
    MOVE gi_reqdate-badat to gi_eban-badat.
    APPEND gi_detail.
endloop.
Hope this will resolve your issue.
Regards,
Debaraj

How can I get the Tables in my report to update their field lists?

I am working with Crystal Reports 2008, and I have a ReportDocument loaded in a .NET project.
I want to update the field lists of the tables (stored procedures) used in the report. I am calling "VerifyDatabase()", but this does not update the field lists. Through the designer, I accomplish this by going to the Database -> Set Datasource Location..., then clicking on the stored procedure (i.e. table) in the report, clicking on the stored procedure under the database in the bottom pane, and then clicking "Update".
How can I accomplish this in code?
Thanks for any help.

Hello,
You have to use RAS and the replace connection method. The Report Engine does not have the ability.
Search forums for "ReplaceConnection_Click" and you'll find sample code that should work for you.
Thank you
Don

Where can I get help interpreting a crash report?

PPro has been crashing a lot for me the last few days, just at the touch of a new tab in sequence window. HAve tried uninstalling and reinstalling, updating nVidia drivers, and it continues. The crash message is to the effect that "PPro has encountered a serious error and must shut down," whereupon it quits and generates a crash report, which I cannot make heads nor tails of. Would love to solve this suddenly appearing issue ASAP, as, of course, I am in the middle of a large project.
I would attach the crash report (one of them) but don't see how to do that here.
Where to send the crash report for interpretation help? Has anyone else recently been experiencing such crashes?
Thanks for any and all help,
Michael

Some things to do while everything is working
1st, make a full backup of your boot drive... The product I use is at http://www.terabyteunlimited.com/image-for-linux.htm
Image runs off of a bootable CD via Linux (the Zip you download includes a program to make the bootable CD) and it reads EVERYTHING on the drive, even the hidden registration information, so everything is restored when needed... and you may restore the image to a brand new drive in case of a crash, and not have to re-install anything
2nd, a good idea at ANY time is to do a file "save as" to save your project to a new name (once a day is good) so IF your project becomes corrupted, and that corruption extends to your auto-save project files, you can go back a day to your previous project version

How can I get query filter dates in report heading?

Hello everybody.I'm pretty new at this so I hope this is the place to ask this question.I'm trying to create a report in WebI where I want a number of cases sorted by a number of categories and between different dates. The dates are supposed to be selceted at the time you are running the report (like "I want all cases between 2006-03-13 and 2006-05-30). And this is ofcourse done by using the "Finished date" object that I've created in the universe as a filter. The dates selected in the query is supposed to be included in the report heading (like "Results of cases between {date 1} and {date 2}". I have been reading the documentation about free cells, but the only thing I've found was about last refresh date and drill level. Anyone who understand what I'm talking about <img src="/modules/tinymce/tinymce/jscripts/tiny_mce/plugins/emotions/images/smiley-smile.gif" alt="Smile" title="Smile" width="18" height="18" />and know how I can accomplish this?Thanks in advance!

UserResponse(DataProvider([date 1]); "Start date?")

Can I get help with this crash report please

This is the crash ID
Crash ID: bp-9d96e2ef-a87c-490d-9ad8-f644e2130205

hello christhwaites, from the crash report you've submitted it seems like the crash is malware related. the malicious file on your pc causing the crash is named ''enrwsoca.dll'' (randomly generated filename).
according to reports from other users it should be detected &removed by microsoft safety scanner and kaspersky security scan. please run a full scan with these products:
http://www.microsoft.com/security/scanner/default.aspx
http://www.kaspersky.com/security-scan
for some general info see [[Troubleshoot Firefox issues caused by malware]]

Can I get user id in oracle reports 6i

Hello,
I am using fnd_global.user_id but it's returning the 1st value from fnd_user table instead of the current user id who had logged in, can any one help me.
Regards,
Dinesh.

We cannot guess what fnd_global.user_id does.
Current user is USER, like in
select user from dual

How can i get data from standard report 'PP_ORDER_PROGRESS'?

When I have a sales order,i want get Production Orders & Plan Order related to this SO.
The same as result of standard report 'PP_ORDER_PROGRESS'~~
How can I get the same data like report 'PP_ORDER_PROGRESS'~~
TKS very very much~~

Lorry,
I hope you are looking for an option similar to CO46 transaction.
You can use transaction COOIS, activate "Production orders" and "Planned orders" check box and in header level selection input your Sales order number to get a report you wanted.
Regards,
Prasobh

How can I get the gps coordinates on my ipad which was stolen today?

My ipad was stolen today, how can I get the gps coordinates to report to the sherriff?

If Find My iPhone (iPad) was turned on on your iPad and the iPad is on and connected to the Internet you will be able to locate it. Go to iCloud.com and sign in with your Apple ID and password. If the device is off or not connected to the Internet you can send a signal to lock or erase the iPad but that action will not complete until the iPad is connected to the Internet.
If you did not have find my iPhone turned on there is no way to track your iPad.

Get DataTable From SSRS Server Report

HI,
I am using SSRS reporting service. In my web application, I am showing SSRS Server Report in my custom rdlc viewer.
I am getting report definition by ReportingService2005 Web Service and setting report parameters from UI.
My Code Snippet Like Below:
RptViewer.ProcessingMode = ProcessingMode.Remote;
IReportServerCredentials irsc = new CustomReportCredentials(System.Configuration.ConfigurationManager.AppSettings["rsUser"], System.Configuration.ConfigurationManager.AppSettings["rsPassword"], System.Configuration.ConfigurationManager.AppSettings["rsDomain"]);
RptViewer.ServerReport.ReportServerCredentials = irsc;
RptViewer.ServerReport.ReportServerUrl = new Uri(System.Configuration.ConfigurationManager.AppSettings["SSRSSVR"]);
RptViewer.ServerReport.ReportPath = my_reportPath;
RptViewer.ServerReport.SetParameters(reportParameters);
RptViewer.ServerReport.Refresh();
MY Question:
This Code directly show the report. But my requirement is not to showing the report if the datatable return 0 rows.
How can I get the datatable from server report just before loading the report? Is there any way?
Getting the datatable from server report is also necessary for another reason. I want to export the report to excel (only data not rdlc built in excel format), and for that I need the datatable available.
Since the report is already loaded, I do not want to query again to pick the datable.
So, Is there any way to get the resultant datatable before the server report loaded in report viewer.
Regards,

hope the link is hopeful:http://www.experts-exchange.com/Programming/Microsoft_Development/Q_27581973.html

HT1657 My rental movie is not playing, and I have 24 hours to watch it, and I did want to watch it tonight, can I get reimbursed?

My rental movie is not playing, and I have 24 hours to watch it, and I did want to watch it tonight, can I get reimbursed?

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Can I get a matchode in a report parameter?

Similar Messages

Maybe you are looking for