Can i get an overview of this modulation using FPGA?
Hi,
I am modulating a digital signal using fpga.For this I am generating the IQ symbols in fpga. For upconversion, I have NI 5672 RFSG. how do I send these symbols to multiply with carrier generated in RFSG?
schwaijo wrote:
Hello jschell,
thank you for your answer.
let me try to clarify question with a few more facts about that what i want to do.
I saw a example where the .dll file wich should be uses has been made available with:
System.loadLibrary("XTapi");<<and the methods that are used has been declared with:
private native int initTapi();<< for exampleWhat i want to do is, to access the methods of tapi32.dll file of windows in the same way, but there is nowhere to find a documentation about this file.
You have a JNI library and you are not the owner or at least you do not have the source code.
The JNI methods in the dlls cannot be accessed via java in any other manner than what the java code of the library already does. That is because the C signature of the name depends on the java package and class names.
As I noted you can find the methods of the dll. You could, with a LOT of work reverse engineer the dll.
So,can anybody tell me weather there is a way in JNI to get more Informations about the methodes in that file?As I already said, there are OS specific tools that allow you to determine at least the name of the method. I suspect that is all the information that exists.
Similar Messages
-
How can i get apple to understand this is an authorize cord? It's the cord that came with the phone.
cheriefromcatawba wrote:
How can i get apple to understand this is an authorize cord? It's the cord that came with the phone.
Is that what Apple told you when you took your phone and usb cord to the store? -
I cannot locate my cs6 redemption code and I just purchased a new computer because my old one doesn't work anymore. How can I get my photoshop on this computer? All my other products are registerd with a serial number
The activation servers for CS and CS2 stopped working and were taken down. You'll need to take a look at this link for your issue: https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
Benjamin -
My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port. How can I get windows to detect this device? A message from windows says: the device has malfunctioned.
Try TS1363: iPod: Appears in Windows but not in iTunes.
See also Corrupt iPod classic.
tt2 -
I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do? How can I get the data off this disc? I can see it has been already burned, so files are on there?
Try cleaning the lens and see if that will restore functionality to the DVD drive. Use a DVD lens cleaning disk, if you have a can of compressed air, shoot some into the slot or wrap a fine microfiber cloth (eyeglasses cleaning cloth) around a business card and insert it gently inside the slot.
If no success, make an appointment at an Apple store genius bar and get a free diagnosis from them.
Ciao. -
My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it... -
How can i get the list of all tcode used by user of particular module
Hi,
How can i get the list of all tcode used by user of particular module (e.g FI , MM ,PP) within year .
Regards
VikramLogin to your SAP System
Run TCode SE16
Type Table Name : TSTCT
Press F7 Key (Table Contents )
Go to Settings in menu bar
Select User Parameters
Under Keyword select Field Label and press green check mark
Select your criteria in Data Browser and execute
You will see all t codes in there
Regards,
Yogesh -
I have an old apple desktop that needs an OS. Where can I get an OS for this that mac?
What type on machine is it?
-
My audiobook is for sale on iTunes, but iTunes is using the wrong "Preview" section. The section they used is the only 30 sec. in Spanish and the rest of the book is in English. How can I get iTunes to fix this?
Hello,
Is your problem solved ? i got exactly the same problem... So boring...
Thanks -
When I connect my Nikon coolpix S9200 to the camera adaptor I get a message saying this device uses too much power, how can I overcome this?
You are probably seeing this message because the camera uses the same port to charge it. The iPad can not supply the power to charge devices from it's dock connector. Also if you use the SD card adapter you are not using up the camera's battery for transferring the photos.
-
My iPad 2 has no " software update " when I go to settings/general. How can I get iOS 5 in this case ? Thank you.
<E-mail Edited by Host>The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623 -
After installing OS X Yosemite 10.10.2 - I get this when I try to open Illustrator “ To open “Adobe Illustrator CS6” you need to install the legacy SE6 runtime.” I can not get seem to do this, how is this done?
Robert,
It seems to be enough to create empty folders at “/System/Library/Java/JavaVirtualMachines/1.6.0.jdk” and “/System/Library/Java/Support/Deploy.bundle”, to make Illustrator use Jave SE 8 as it should.
This way to get round the legacy JAVA requirement was presented by Kals in post #7 in this thread:
https://forums.adobe.com/thread/1637908 -
I ran out of space on my icloud so my phone could no longer back up. I have now deleted lots from my phone, how can I get icloud to recognize this so it will complete a back up.
A. Have you gone in to 'manage your iCloud?', and have you rebooted your iPhone. I think the idea is to delete yor previous backups and start with a new one.
-
Can u get me out of this ?
I had got my iphone 3gs from the US in april and it was purchased without contract from AT&T. When i got it here in India I jail broke it using Spirit. There was a dead pixel in my phone and hence i had to send it back to US for replacement. Before sending it I restored it back to factory settings. Now my current phone config is given below
Version: 4.0(8A293);
Carrier: AT&T 7.0;
Model: MB715LL;
Serial Number: 84013(First 5 digits);
Modem Firmware: 05.13.04;
Boot Loader: 359.3.2(Checked through properties of the device);
can anyone get me out of this ?Perhaps you should have done some more research before purchasing an iPhone from the US? If you had, you would have found out that it would not work in India and would not have purchased it in the first place?
Your solution is that you need to purchase another iPhone from a country like the UK that sells unlocked iPhones to get the phone to work in India. You can't do this online, so it would mean purchasing one next time you visit the UK, or getting a friend who is visiting the UK to purchase an unlocked iPhone from the Apple store.
I suppose it is too late to send your other iPhone back to the States and get a refund? If so, you are stuck with a non functioning and very expensive paper weight! -
I can't get an answer to this. I have a 120 gb iPod. Way too much to put my music on my iPhone. Is there a way to just put some of my music on my iPhone?
Playlists on the iPhone are the same as on the iPod. Just connect the iPhone and go to the iPhone Music tab in iTunes. You can check the playlists you want on the iPhone.
One "trick" is to create a new playlist and just drag all of the music you want on the iPhone to this playlist, then sync only that playlist.
Another option is to use the "Convert higher bit rate songs to 128kbps AAC" on the iphone Summary page in iTunes. This will compress the music and you will lose some quality, but unless you are using $500 headphones you won't notice.
The manual is in Safari on your phone; its a predefined bookmark. You can also download a PDF:
iPhone User Guide (For iOS 6.1 Software)
Maybe you are looking for
-
Mail attachment in jpg file requires photo paper on eprint
Hello, I am using an HP Photosmart 7510,printer. I have just configured eprint and I tried by sending by eprint a mail with a jpg attachment. The printer requires me to put photo paper into the printer. The problem is that if the attachment is in jpg
-
Flat file data upload - happens for only 1 column
Dear Experts, Goal: To upload data from flat file (with 3 columns-char3,language,text) to characteristic (texts). Problem: I am doing through CSV File but when i click on preview i am able to see data only in first column, the other two columns are e
-
I right clicked or somthing but when ever I put my curser over somthing and detail like in games or on somthing els should show up they dont unless i click it. Some one please help me
-
Why do i need a os server?
In what scenerio does one need to purchase mac mini server instead of the regular mac mini?
-
Hi All In SAP Plant Maintenance we are using CATS . So business wants to know which data entry profile the user has used while entering the time for the work order. So is there any satndard report or table from where I can find out which data entry p