Can I load a vi into memory programmatically

Here's the situation (I'm programming in LV7.1)...
I've got a program that runs, which uses the DSC. I'm wanting to programmatically shut down and quit the Tag Engine when the program ends. My problem is that when I use "Engine Shutdown.vi", all vi's that use the tag engine have to shutdown before the Tag Engine will completely shut down. If I call this an wait (monitoring engine status for shutdown), then I get a deadlock error. If I call this and end the program, then I get a pop up asking if I want to "Stop and close Tag Engine" (and for some reason an error afterwards as well, doesn't describe error, just that a log is being created.) My goal is to have to pop up or dialog boxes appear that the user has to interact with when shutting down.
So the solution that I believe would be appropriate for this would be to close the main program and have a separate vi (that is independant of the main program structure) call the "Engine Shutdown.vi", then quit itself, closing LV. So I've been messing around with this...
"Open VI Reference" with the vi path connected as an input (just a simple vi I made to kill the Tag Engine, wait until it falls, then kills Labview). This is connected to an "Invoke Node" with the 'Run VI' method selected, property 'Wait until done' set to False, and 'Auto Dispose Ref' set to True.
This works all fine on my developement machine, but I imagine I'm going to have issues when compiling this and installing it onto it's target machine. How would I compile this? If I add this vi to the build as a Dynamic VI will it automatically be loaded into memory when the program runs (on the target computer)? If not, is there any way I can programmatically load this vi into memory in such a way where it is not a subvi to my program (else it will have same issues shutting down Tag Engine)?
As always I appreciate everybody's help,
Sean

Mike, thx for your response. Let me run this by you...
So if I put Main.vi and Kill Engine.vi in the same folder on my developement machine, have the attached snippet of code execute when Main.vi is ready to shut down (very last thing to run, after all loops conclude) build the app (with Kill Engine.vi as a Dynamic VI), and install the app on the target machine, does it sound by you that this will work? (Kill Engine.vi is the simple vi I made to shutdown and quit the Tag Engine, wait for this to conclude, then exit Labview).
Thanks,
Sean
Attachments:
snippet.JPG ‏8 KB

Similar Messages

Should I load product info into memory or keep in db?

Hi,
I am going to develop a b2c shopping website with jboss-tomcat bundle. Now I must make a decision on whether I should load product info into memory or just keep it in table. If load into memory, the performance of customer browsing and searching will be good; but I am afraid of the memory capacity and issues like, when I want to update the product price or description, I need to refresh the memory objects. This shop has about 500 products and we will develop this application into Dell server with 1GB memory. Can anyone who has ever developed such e-commerce website give me some suggestions?
Thanks.
Henry

I usally use XSLT enabled servlets using Apache Xalan http://xml.apache.org
Its as easy as caching the result of a transformation for a particular URL request in a generic servlet against the string url and putting htem in a HashMap.
Usual architecture is EJN stateless session beans sending xml to a servlet which styles it and caches the result according to configuration.
Work out cache expiry etc later once you get things going.
To answer your question completely, it would be on the servlet side that I would do the caching.
You may be able to do it using servlet chaining or filters, although I have not tried this but have seen some tutorials about this sort of stuff.
The main concept of page caching is storing the whole html page in memory in the servlet (or in a Java class structure contained in the servlet) and whenever a page request matches a cached entry, just send the cached html straight at the browser, instead of expensively creating a new dynamic page.
Consider implementing gzip encoding as well and storing zipped pages in memory, much faster. Avoid implemrnting stuff that a proxy server would give you out of the box.
I usually try to configure what urls are cached and what are not.
If you are using JSP, I am sure someone has implemented caching of jsp content, a preoduct called Tiles perhaps?
Josh

Remote Panel: how to load a vi into memory without showing it on the screen

Hi,
I'm using the remote panel facility of LabView 6.1 to allow any user
to control my instruments from within a web browser. However, in order
for this to work, labview has to be running and the vi opened on the
server, which i want to avoid.
Is there a possibilily to enable the labview web server and load a vi
into memory in the background, whithout showing it on the screen?
thanks

> Is there a possibilily to enable the labview web server and load a vi
> into memory in the background, whithout showing it on the screen?
>
Not at the moment. The VI truly is running on the server and simply
displaying on the remote machine(s). At the moment it also needs to
have a display on the server. You probably could write a small VI to
periodically look for open LV windows that have connections to them and
minimize them. Then run that VI on the server.
Greg McKaskle

Can't load Raw files into Lightroom 3 form my Nikon D7100

Can't load Raw files into Lightroom 3 form my Nikon D7100... Why?

TGTruman wrote:
How do I convert the Nef to DNG files...
Download the Adobe DNG Converter (and install it, and run it...).
Note: an internet search will reveal a link in short order.
TGTruman wrote:
I don't mind going to LR5, just don't want to spend the money and then not have it work...
So use the trial first. No?
R

Can't load module: Out of memory or no room in system tables

Hi,
I had to install openSSH on Solaris 8. By default Solaris 8 doesn't have random devices. Moreover, that machine cannot be rebooted. Hence, I chose a patch which doesn't need a reboot if the random devices are created and the /kernel/drv/random module is force loaded.
While force loading the module (modload /kernel/drv/random) I got the below error.
" can't load module: Out of memory or no room in system tables "
I have checked for the memory and there are no memory constraints. I need to force load the module.
Could anyone help me out ?
Thanx,
Jaff

I can see only 5 topics and all of them are very specific.
Flash Install
Live Upgrade
Jumpstart
Solaris Install from cd
Solaris on x86
Could you please suggest me the forum in which I need to post general help ?
Thnx,
Jaff

Fastest way to load an image into memory

hi, ive posted before but i was kinda vague and didnt get much of a response so im going into detail this time. im making a java program that is going to contol 2 robots in a soccer competition. ive decided that i want to go all out and use a webcam instead of the usual array of sensors so the first step is to load an image into the memory. (ill work on the webcam once ive got something substanical, lol) since these robots have to be rather small (21cm in diameter) i can only use some pretty crappy processors. the robots are going to be both running gentoo linux on a 600 mhz processor, therefore it is absoleutely vital i have a fast method of loading and analyzing images. i need to be able to both load the image quickly, and more importainly analyze it quickly. ive looked at pixelgrabber which looks good, but ive read several things about javas image handling beging crap. these articles are a few years old, and im therefore wonding if there anything from the JAI that will do this for me. thx in advance.

well i found out why i was having so much trouble
installing JAI. im now back on windows and i cant
stand it, so hopefully the bug will be fixed soon. oIt's not so bad. I mean, that's why we love Java! Once your linux problem is fixed you can just transfer your code there as is.
well. i like the looks of JAI.create() but im not so
sure how to use it. at this stage im tying to load an
image from a file. i no to do this with pixelgrabber
you use getcodebase(), but i dont know how to do it
with JAI.create. any advice is appreciated. thx.Here are some example statements for handling a JAI image. There are other ways, I'm sure, but I've no idea which are faster, sorry. But this is quite fast on my machine.
PlanarImage pi = JAI.create("fileload", imgFilename);
WritableRaster wr = Raster.createWritableRaster(pi.getSampleModel(), null);
int width = pi.getWidth(); // in case you need to loop through the image
int height = pi.getHeight();
wr = pi.copyData(); // copy data from the planar image to the writable one
wr.getPixel(w,h,pixel); // pixel is an int array with three elements.
int red = pixel[0]; // to find out what's the red component
int[] otherPixel = {0,0,0}
wr.setPixel(w,h,otherPixel); // make pixel at location (w,h) black. And here's a link with sample code using JAI. I've tried several of the programs there and they work.
https://jaistuff.dev.java.net/

Can't load m4v files into Photoshop

I created a H264 Blu-ray (m4v) using Adobe Premiere Pro CS4. It was a exported as 1080i file. I tried to load this file into Photoshop CS4 extended. Photoshop says that it "could not complete your request because the movie file could not be opened". Can anyone help as it is important to me to apply some Photoshop to fix overexposure which it does superbly to a Quick Time (720*480) file. I want to do the same for 1080i file.
Thx
Sundar

I initially captured the clip as .MTS in 1080. Using premiere CS4, I exported part of the clip as H264 Blu-Ray (m4v). If I try QT as output format, it is of lower resolution. You are right that Photoshop does not have problem in pulling in QT clips.
You answered your own question. H.264 BluRay is a multiplexed sub-format of H.264 which is not compatible with QT's implementation of H.264. If you want to use H.264, you must export normal H.264 and the profile level must be set to 3.1, basic in the exporter. Then, after export, you simply rename the file to *.mov. That aside, you can always use alternate Quicktime CoDecs like PNG or PhotoJPEG and directly export to a MOV. Your loss in quality is due to incorrect field settings, so that needs to be set properly. It merely doesn't affect your H.264 output, because there everything is set correctly already in the presets.
Mylenium

How can I load TPX Pantones into CS6 Photoshop palette?

I use the Pantone papers for Fashion and Home and want to be able to load/download these into my photoshop palette rather than having to print out my designs and then match them to the papers by going tirelessly through the book. I've looked on the Pantone website and their links are useless and seem to be sending me round in circles. Photoshop seems to have every other type of Pantone pre-loaded apart from the TPX ones I need! Can any one help?

You would need the ACB files from Pantone for the TPX books, and install those in the Photoshop presets folder.
Sorry, but there are several of the more obscure Pantone books that we haven't shipped yet. (and it takes quite a bit of time to clean up and validate them all)

Can I load windows office into iPad?

Hi, I am looking at buying my partner the iPad or iPad2 and was wondering if Windows Office for Mac can be loaded into it?

do you mean using word,excel and powerpoint on ipad ?
If YES
there's an app Quick office pro or Office HD that can be used to use microsoft office

How can I load my Xlet into commercial STB emulator

Hi
I have developed some Xlets, and I could run and view the output of those Xlets in XleTView emulator.Now I want to run these xlets in commerial emulators like MHDK STBS .But I don't know how to load these Xlets into that emulator and run
Any help would be greatly approiated.
Thanks in advacne.

hi
if you want to test Xlets in the same real environment of a digital television, you can use [ OpenCaster|http://www.avalpa.com/the-key-values/15-free-software/33-opencaster] , it's a free software stand-alone carousel server that can do all the DVB tables to and a sample audio video playout server.
You just need a supported PCI card that can modulate COFDM and drive directly a DVB STB (for DVB-T terrestrial, you could use a [Dektec DTA110T|http://www.dektec.com/Products/DTA-110T/index.asp], BTW i've no business interest with them.. )
Hope it helps.
bye
andrea Venturi

Can I load a swf into my Flex app that loads other swf's?

The code below loads an AS2 swf into my Flex mobile for IOS app and it works. If that AS2 swf has like a circle in it that runs across the stage, it loads and displays properly when run in FlashBuilder.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                                 xmlns:s="library://ns.adobe.com/flex/spark"
                                 xmlns:mx="library://ns.adobe.com/flex/mx"
                                 initialize="init()">
          <fx:Script>
                    <![CDATA[
                              import mx.core.UIComponent;
                              private var request:URLRequest = new URLRequest("http://PATH_TO_AS2_SWF");
                              private var loader:Loader = new Loader();
                              private var myComponent:UIComponent = new UIComponent;
                              private function init():void{
                                        myComponent.percentHeight = 100;
                                        myComponent.percentWidth = 100;
                                        loader.load(request);
                                        myComponent.addChild(loader);
                                        player.addElement(myComponent);
                    ]]>
          </fx:Script>
          <s:Group id="player"
                               height="100%" width="100%"/>
</s:Application>
But if that AS2 swf loads other swf's, they don't load or display. My FlashBuilder debugger reports no errors or security sand box violations.   I'm using the most elemental code in my AS2 swf so as to not cause problems. This is it in its entirety:
this.onLoad = function(){
          _root.loadMovie("http://[PATH_TO_REMOTE_SWF]");
The paths to the remote content are fine because swf's load and display fine from AS2 swf when run on it's own - not embedded in Flex app. They also load and run fine if I cut out the AS2 swf and access directly from my Flex code. So I know there isn't a path issue. More likely not accessing the right layer in the AS2 swf from Flex or something. Or maybe security sandbox violation but I don't see anything reported in the FlashBuilder debug console. When run console just reports:
[SWF] SwfMobile.swf - 2,639,761 bytes after decompression
[SWF] assets/swf/AS2.swf - 1,470 bytes after decompression
Is there something inherently wrong with loading swf's that load other things? Even if I have the AS2 swf load jpgs they don't load so the format of the target content at the end of the chain doesn't seem to be the issue. Just the act of embedding a swf that loads other things seems to be the problem.

Ah, yes. Using an AVM1 SWF could prove difficult...
I'm going on about 3 hours of sleep at the moment, but let me toss out a few thoughts I have and hopefully something will stick...
Ok, so my first thought what to try and cast the loaded content as a MovieClip and call methods on that, but the fact they are AVM1 throws that out the window.
That leaves LocalConnection, as you mentioned. But this would require you to have code on the receiving end to handle the connection... no good either.
But what if you created a "bridge" in AS2 that holds all the code for the receiving end of LocalConnection (or has the control logic itself, perhaps even eliminating the need for LocalConnection all together!). I think maybe this is what you were trying to do already by loading a SWF into a SWF? Well instead of loading your bridge at runtime, what if you statically linked it into your project as a class?
*a few moments later*
Well it looks like you can in fact link in a a symbol created for AVM1, but it will only come in as a SpriteAsset, and will not include any custom code (which makes sense, since they use entirely different class constructs).
To do the test, I created a symbol exported for actionscript (AS2/Flash8), then linked it in with a CSS style embed. I then instantiated the class and called describeType on it.
So in summery, it looks like calling custom code on the bridge is out (I did not test this extensively, that was just my first impression with this simple test). However, if you may be able to perform the actions you need by attempting to cast the loaded content into something AVM2 can recognize. Apparently it does this automatically when linked in statically, so maybe there is something there worth looking into... mainly, can you do what you need using only the base class and no custom code?
Keep me posted!

Can i load data directly into DSO without PSA?

hi friends,
can i load data into DSO directly without PSA(without infopackage), if possible ple let me know where can i do that in dtp?
regards
ss

Suneel,
Why don't you try it to see if error DTP is possible with a flat file ds or not?
Or, extrapolate logically -
- An error DTP is based on a regular DTP.
- In any situation where you can have a DTP, why can you not have an error DTP? I would think there would be no reason for this.
At this point of my reasoning I will give it a try to validate if my assumption (DTP possible==>Error DTP possible) is correct or not.
regards,

HT204003 How can I load all giftcards into one

i have a whole bunch if the same brand giftcards on my passbook how can i put them all into 1

I have two files the file with the main method has four inner classes.
i tried to use the jar cvf command but it only jars the file i say to jar the inner classes dont get jared. Is there a way of using one command to jar my two files and include the inner clases that are in one of the files?

How can i load Metadata file into georaster?

Hello everybody,
I stone a tiff file in my db,I stone tiff file like this:
1.create GeoRaster Table:
create table rm_image_t(
georid number,
file_type varchar2(30),
image_file mdsys.sdo_georaster);
2.create trigger:
exec sdo_geor_utl.createdmltrigger('rm_image_t','image_file');
3.Create raster data table:
create table rdt1 of mdsys.sdo_raster(
primary key(rasterid,pyramidlevel,bandblocknumber,rowblocknumber,columnblocknumber))
lob(rasterblock) store as (nocache nologging);
4.Grant:
exec dbms_java.grant_permission('OPER','SYS:java.io.FilePermission','c:\aaa.tif','read');
call dbms_java.grant_permission('MDSYS','SYS:java.io.FilePermission','c:\aaa.tif','read' );
call dbms_java.grant_permission('OPER','SYS:java.io.FilePermission', 'c:\aaa.tif','read' );
call dbms_java.grant_permission('PUBLIC','SYS:java.io.FilePermission','c:\aaa.tif','read' );
call dbms_java.grant_permission('MDSYS','SYS:java.io.FilePermission','c:\aaa.tif','read' );
call dbms_java.grant_permission('OPER','SYS:java.io.FilePermission', 'c:\aaa.tif','read');
call dbms_java.grant_permission('PUBLIC','SYS:java.io.FilePermission','c:\aaa.tif','read');
5.Insert tiff file:
DECLARE
geor SDO_GEORASTER;
BEGIN
-- Initialize an empty GeoRaster object into which the external image
-- is to be imported.
INSERT INTO rm_image_t
values( 1, 'TIFF', sdo_geor.init('rdt1') );
-- Import the TIFF image.
SELECT image_file INTO geor FROM rm_image_t
WHERE georid = 1 FOR UPDATE;
sdo_geor.importFrom(geor,'blocksize=(512,512) compression=DEFLATE', 'TIFF', 'file','c:\aaa.tif');
UPDATE rm_image_t SET image_file = geor WHERE georid = 1;
COMMIT;
END;
Then:
SQL> SELECT t.georid,
2 sdo_geor.validategeoraster(t.image_file) isvalid
3 from rm_image_t t order by georid;
GEORID ISVALID
1 TRUE
But I do not know how to load tiff_file's metadata into georaster.
Can you help me?thanks!

My metadata file called aaa.met,it has the following info:
GROUP = METADATA_FILE
     PRODUCT_CREATION_TIME = 2004-02-12T15:09:20Z
     PRODUCT_FILE_SIZE = 703.1
     STATION_ID = "EDC"
     GROUND_STATION = "SGS"
     GROUP = ORTHO_PRODUCT_METADATA
          SPACECRAFT_ID = "Landsat7"
          SENSOR_ID = "ETM+"
          ACQUISITION_DATE = 2001-10-03
          WRS_PATH = 138
          WRS_ROW = 036
          SCENE_CENTER_LAT = +34.6152272
          SCENE_CENTER_LON = +91.7569675
          SCENE_UL_CORNER_LAT = +35.5648302
          SCENE_UL_CORNER_LON = +90.9958720
          SCENE_UR_CORNER_LAT = +35.2772270
          SCENE_UR_CORNER_LON = +92.9740331
          SCENE_LL_CORNER_LAT = +33.9414953
          SCENE_LL_CORNER_LON = +90.5596099
          SCENE_LR_CORNER_LAT = +33.6605964
          SCENE_LR_CORNER_LON = +92.5005228
          SCENE_UL_CORNER_MAPX = 318373.500
          SCENE_UL_CORNER_MAPY = 3937531.500
          SCENE_UR_CORNER_MAPX = 497638.500
          SCENE_UR_CORNER_MAPY = 3903787.500
          SCENE_LL_CORNER_MAPX = 274455.000
          SCENE_LL_CORNER_MAPY = 3758352.000
          SCENE_LR_CORNER_MAPX = 453691.500
          SCENE_LR_CORNER_MAPY = 3724636.500
          BAND1_FILE_NAME = "aaa.tif"
          GROUP = PROJECTION_PARAMETERS
               REFERENCE_DATUM = "WGS84"
               REFERENCE_ELLIPSOID = "WGS84"
               GRID_CELL_ORIGIN = "Center"
               UL_GRID_LINE_NUMBER = 1
               UL_GRID_SAMPLE_NUMBER = 1
               GRID_INCREMENT_UNIT = "Meters"
               GRID_CELL_SIZE_PAN = 14.250
               GRID_CELL_SIZE_THM = 57.000
               GRID_CELL_SIZE_REF = 28.500
               FALSE_NORTHING = 0
               ORIENTATION = "NUP"
               RESAMPLING_OPTION = "NN"
               MAP_PROJECTION = "UTM"
          END_GROUP = PROJECTION_PARAMETERS
          GROUP = UTM_PARAMETERS
               ZONE_NUMBER = +46
          END_GROUP = UTM_PARAMETERS
          SUN_AZIMUTH = 147.9348938
          SUN_ELEVATION = 46.4220192
          QA_PERCENT_MISSING_DATA = 0
          CLOUD_COVER = 0
          PRODUCT_SAMPLES_PAN = 17814
          PRODUCT_LINES_PAN = 15754
          PRODUCT_SAMPLES_REF = 8907
          PRODUCT_LINES_REF = 7877
          PRODUCT_SAMPLES_THM = 4454
          PRODUCT_LINES_THM = 3939
          OUTPUT_FORMAT = "GEOTIFF"
     END_GROUP = ORTHO_PRODUCT_METADATA
     GROUP = L1G_PRODUCT_METADATA
          BAND_COMBINATION = "123456678"
          CPF_FILE_NAME = "L7CPF20011001_20011231_04"
          GROUP = MIN_MAX_RADIANCE
               LMAX_BAND1 = 191.600
               LMIN_BAND1 = -6.200
               LMAX_BAND2 = 196.500
               LMIN_BAND2 = -6.400
               LMAX_BAND3 = 152.900
               LMIN_BAND3 = -5.000
               LMAX_BAND4 = 241.100
               LMIN_BAND4 = -5.100
               LMAX_BAND5 = 31.060
               LMIN_BAND5 = -1.000
               LMAX_BAND61 = 17.040
               LMIN_BAND61 = 0.000
               LMAX_BAND62 = 12.650
               LMIN_BAND62 = 3.200
               LMAX_BAND7 = 10.800
               LMIN_BAND7 = -0.350
               LMAX_BAND8 = 243.100
               LMIN_BAND8 = -4.700
          END_GROUP = MIN_MAX_RADIANCE
          GROUP = MIN_MAX_PIXEL_VALUE
               QCALMAX_BAND1 = 255.0
               QCALMIN_BAND1 = 1.0
               QCALMAX_BAND2 = 255.0
               QCALMIN_BAND2 = 1.0
               QCALMAX_BAND3 = 255.0
               QCALMIN_BAND3 = 1.0
               QCALMAX_BAND4 = 255.0
               QCALMIN_BAND4 = 1.0
               QCALMAX_BAND5 = 255.0
               QCALMIN_BAND5 = 1.0
               QCALMAX_BAND61 = 255.0
               QCALMIN_BAND61 = 1.0
               QCALMAX_BAND62 = 255.0
               QCALMIN_BAND62 = 1.0
               QCALMAX_BAND7 = 255.0
               QCALMIN_BAND7 = 1.0
               QCALMAX_BAND8 = 255.0
               QCALMIN_BAND8 = 1.0
          END_GROUP = MIN_MAX_PIXEL_VALUE
          GROUP = PRODUCT_PARAMETERS
               CORRECTION_METHOD_GAIN_BAND1 = "CPF"
               CORRECTION_METHOD_GAIN_BAND2 = "CPF"
               CORRECTION_METHOD_GAIN_BAND3 = "CPF"
               CORRECTION_METHOD_GAIN_BAND4 = "CPF"
               CORRECTION_METHOD_GAIN_BAND5 = "CPF"
               CORRECTION_METHOD_GAIN_BAND61 = "CPF"
               CORRECTION_METHOD_GAIN_BAND62 = "CPF"
               CORRECTION_METHOD_GAIN_BAND7 = "CPF"
               CORRECTION_METHOD_GAIN_BAND8 = "CPF"
               CORRECTION_METHOD_BIAS = "IC"
               BAND1_GAIN = "H"
               BAND2_GAIN = "H"
               BAND3_GAIN = "H"
               BAND4_GAIN = "L"
               BAND5_GAIN = "H"
               BAND6_GAIN1 = "L"
               BAND6_GAIN2 = "H"
               BAND7_GAIN = "H"
               BAND8_GAIN = "L"
               BAND1_GAIN_CHANGE = "0"
               BAND2_GAIN_CHANGE = "0"
               BAND3_GAIN_CHANGE = "0"
               BAND4_GAIN_CHANGE = "0"
               BAND5_GAIN_CHANGE = "0"
               BAND6_GAIN_CHANGE1 = "0"
               BAND6_GAIN_CHANGE2 = "0"
               BAND7_GAIN_CHANGE = "0"
               BAND8_GAIN_CHANGE = "0"
               BAND1_SL_GAIN_CHANGE = "0"
               BAND2_SL_GAIN_CHANGE = "0"
               BAND3_SL_GAIN_CHANGE = "0"
               BAND4_SL_GAIN_CHANGE = "0"
               BAND5_SL_GAIN_CHANGE = "0"
               BAND6_SL_GAIN_CHANGE1 = "0"
               BAND6_SL_GAIN_CHANGE2 = "0"
               BAND7_SL_GAIN_CHANGE = "0"
               BAND8_SL_GAIN_CHANGE = "0"
          END_GROUP = PRODUCT_PARAMETERS
          GROUP = CORRECTIONS_APPLIED
               STRIPING_BAND1 = "NONE"
               STRIPING_BAND2 = "NONE"
               STRIPING_BAND3 = "NONE"
               STRIPING_BAND4 = "NONE"
               STRIPING_BAND5 = "NONE"
               STRIPING_BAND61 = "NONE"
               STRIPING_BAND62 = "NONE"
               STRIPING_BAND7 = "NONE"
               STRIPING_BAND8 = "NONE"
               BANDING = "N"
               COHERENT_NOISE = "N"
               MEMORY_EFFECT = "N"
               SCAN_CORRELATED_SHIFT = "N"
               INOPERABLE_DETECTORS = "N"
               DROPPED_LINES = N
          END_GROUP = CORRECTIONS_APPLIED
     END_GROUP = L1G_PRODUCT_METADATA
END_GROUP = METADATA_FILE
END
I want load it into db and query the tif_file use coordinates.
Can you pls tell me how to do it?

Canon T4i and can't load RAW photos into Photoshop 5.1. Is there an extension or plug in for this?

The question says it all. Trying to load my RAW pictures from my Canon T4i using Photoshop 5.1. It says it does not recognize this version of RAW. Help?
Is there an extension or Plug in?
I remember it used to work until I did an update.

Photoshop 5.x is ancient, from last millennium. I'll assume you meant Photoshop CS5.1.
The highest version of ACR, the Adobe Camera Raw plug-in, that will run on Photoshop CS5.x, is ACR 6.7.
The Digital Rebel T4i = EOS 650D = EOS Kiss X4i was supported by ACR for the very first time in ACR 7.1, which needs at least Photoshop CS6 to run.
Your recollection is faulty. You will never be able to open raw files from that camera directly from CS5.1.
You need to look for, download and run the free, standalone Adobe DNG Converter 8.7.1 on each and every batch of Canon raw files from that camera in order to convert them into raw DNGs that you can open in your versions of Photoshop and ACR.

Can I load a vi into memory programmatically

Similar Messages

Maybe you are looking for