Can i monitor only J2EE Application

Hi All,
Can i monitor only the J2EE application runnning in the application server , like only the application threads , memory used by the application etc.
Durga

You won't lose your data. Simply migrate all your data files ( you can select data, appliations, settings) and just choose the data. Then install FMP and Bento manually and you should be able to pick up where you left off.

Similar Messages

IOS6 doesnot support Map Application fully in India. I have updated my i phone4 to ios 6. Now I feel that Map application was much better in ios5. Can I retract only this application?

iOS6 doesnot support Map Application fully in India. I have updated my i phone4 to ios 6. Now I feel that Map application was much better in ios5. Can I retract only this application?

I don't know if this helps, but I'm still working on this problem and took a screen shot of my Console Message errors:
What's happening here is opening the program, trying to save and it crashes. Then trying to open the program again and it crashing before it even opens. Finally opening the program a third time and trying to save it using "save as" instead of "save" (which I found one forum recommending) and it crashing again.

Can't start the J2EE applications

Hello,
I recently installed Oracle 10g on RHEL. After the installation was complete, I got the following links to access the various J2EE applications.
iSQL*Plus URL:
http://nmcerp:5560/isqlplus
iSQL*Plus DBA URL:
http://nmcerp:5560/isqlplus/dba
Enterprise Manager 10g Database Control URL:
http://nmcerp:1158/em
I restarted the machine. And then suddenly it stopped working. It's failing to connect. What may be the issue and hoe can I solve it?
Thanks.

user9946251 wrote:
Hello,
I recently installed Oracle 10g on RHEL. After the installation was complete, I got the following links to access the various J2EE applications.
iSQL*Plus URL:
http://nmcerp:5560/isqlplus
iSQL*Plus DBA URL:
http://nmcerp:5560/isqlplus/dba
Enterprise Manager 10g Database Control URL:
http://nmcerp:1158/em
I restarted the machine. And then suddenly it stopped working. It's failing to connect. What may be the issue and hoe can I solve it?
Thanks.
>Hello,
I recently installed Oracle 10g on RHEL. After the installation was complete, I got the following links to access the various J2EE applications.
iSQL*Plus URL:
http://nmcerp:5560/isqlplus
iSQL*Plus DBA URL:
http://nmcerp:5560/isqlplus/dba
Enterprise Manager 10g Database Control URL:
http://nmcerp:1158/em
I restarted the machine. And then suddenly it stopped working. It's failing to connect. What may be the issue and hoe can I solve it?
Thanks.
You have to start isqlplus and dbcontrol as
$ORACLE_HOME/bin/./isqlplusctl start
export ORACLE_SID=<YOUR_DB>
$ORACLE_HOME/bin/./emctl start dbconsole

Can't find the J2EE Application JDBC Module Datasource in Weblogic

Hello,
I am trying to locate the JDBC Module J2EE application Datasource details in weblogic but I cant find it.
Can someone help me where I can find any Mbean in Weblogic which will specify all the details about the DataSource.
You can see in the image that under deployment I have an application which has Data source(saasreporef).
I have already discovered this target in one of my agent and I want to locate some Mbean which can give me details about this Datasource in Weblogic.

I've solved it myself. It changed to NWDS from the Visual Administrator. It can be undepolyed using undepoly view in the NWDS.
I can find the answer using keword 'Deploying and Running the Application from NWDS' in the help portal.

How can I install my J2EE application on a new WLS domain/server?

Hello All,
I am trying to create an installer for our J2EE application using WLS.
Our requirements:
a. Create a fresh domain/server
b. Create/configure JDBC connection pool/datasources
c. Setup startup classes d. Deploy our J2EE application
Here are the steps:
a. Create a new directory (say myapp)
b. Copy files config.xml, DefaultAuthenticatorInit.ldift and SerializedSystemIni.dat
from an already configured WLS (I have one that has everything including JDBC
datasources/startup classes, etc)
c. Create a directory myserver/upload/myapp
d. Put myapp.ear e. Start the server
Is this the right approach or is any other better way of installing a J2EE app?
Any help in this would be highly appreciated.
Thanks and Best Regards
MS

Check out weblogic 8.1 and the ant tasks wlconfig and wlserver to do this
all from ant.
http://e-docs.bea.com/wls/docs81/admin_ref/ant_tasks.html
Also you can do
java weblogic.Server in any new directory and it will create a new config.
You can pass a command line switch,
mkdir -p /temp/mynewdomain
cd /temp/mynewdomain
java -Dweblogic.management.GenerateDefaultConfig=true -Dweblogic.management.
password=foobar1234 -Dweblogic.management.username=foobar1234
weblogic.Server
That will start a new server with a brand new defaulted config. You then in
7.0 have to run java weblogic.Admin command to create and set mbean
attributes, this means from shell having to fire up VM over and over, from
ANT you wont have this problem if you fork, but I think weblogic.Admin has a
nasy system.exit in it in 7.0 ( Sorry).
Things are better in 8.1 and in our next release we are in planning stages
for adding an installation step to deployment and allowing an applicaiton to
express its dependencies. If you have thoughts on this, shoot me an email
at [email protected]
Cheers
mbg
"MS" <[email protected]> wrote in message news:3e77612e$[email protected]..
>
Hello All,
I am trying to create an installer for our J2EE application using WLS.
Our requirements:
a. Create a fresh domain/server
b. Create/configure JDBC connection pool/datasources
c. Setup startup classes d. Deploy our J2EE application
Here are the steps:
a. Create a new directory (say myapp)
b. Copy files config.xml, DefaultAuthenticatorInit.ldift andSerializedSystemIni.dat
from an already configured WLS (I have one that has everything includingJDBC
datasources/startup classes, etc)
c. Create a directory myserver/upload/myapp
d. Put myapp.ear e. Start the server
Is this the right approach or is any other better way of installing a J2EEapp?
>
>
Any help in this would be highly appreciated.
Thanks and Best Regards
MS

Can not run the J2EE application on webless iAS

Hi:
I have installed iAS on Salaris, and installed a webconnector on IIS which
hosted on different machine.
Now I can run the simple servlet sample, but I can not run the Helloworld
application that I deployed follow the guide. The error message was: socket
receive error (RecvBuffer 1)

Don wrote:
Hi:
I have installed iAS on Salaris, and installed a webconnector on IIS which
hosted on different machine.Wow, I did not know that iAS support IIS as the web server. I think SP3
will
allow you to use Apache as well as iPlanet's web server, but I not think
IIS is
supported. Perhaps you should use a supported web server.
Kent

I am waiting for a new iMac with two drives: SSD conventional hard drive. How can I transfer only a certain number of applications to the SSD and the rest to the physical hard disk drive?

I am expecting a new iMac (i7 with SSD). How can I transfer only certain applications along with the system, library etc. to this limited (space) HD and other applications to the conventional disk HD in order to save space on the SSD?
Thank you,
Gilles

Tom Lassiter wrote:
I have the same scenario, using an SSD for my start-up drive. I have copied my Applications folder to a mechanical hard drive and created symbolic link to it. The symbolic link resides on the SSD and works properly.
That may not be the best solution. Many updaters expect apps, especially Apple apps, to be in the /Applications folder on the OSX drive; if there are updates, the apps may not be found, thus may not be updated. I don't know if the installers/updaters will follow a symbolic link or not.
DItto some apps, especially Adobe apps, won't even work if they're anywhere else. Again, I don't know if they'll follow a symbolic link, either.

HELP!!! Cannot deploy J2EE application with Oracle JDBC driver...

Hi,
I am writing a J2EE application which (in theory, at least)
connects to an Oracle 9i database.
I have written a simple Java test app utilising only the
java.sql package classes (e.g. Connection, ResultSet) to directly
connect to the database. As long as the classes12.zip is in the
CLASSPATH it works fine.
Now I have written an Enterprise application (SessionBean,
Remote and Home interface and Client) which I am attempting to
deploy via deploytool.
If I include just the client jar and EJB jar in the application
it deploys okay but when I run the application (using runclient)
it produces the following error:
java.lang.NoClassDefFoundError: oracle/jdbc/OracleDriver
(It is nested within other error output but that is the core
issue).
However if I try to include the JAR libraries into the app
(classes12.jar and nls_charset.jar from $ORACLE_HOME/jdbc/lib),
then I get the following output from deploytool when I hit the
"deploy" (or "redeploy") button:
Deployment error: invalid entry compressed size
(expected 14411 but got 14580 bytes)
Can someone please tell me what is going on???
How can I deploy the J2EE application including the Oracle
JDBC Driver???
My only other option at the moment is to place all the function-
-ality in the client and not use the J2EE framework.
Any help is greatly appreciated.
Regards,
Ben New
Leftclick Software Development
[email protected]

OK Ben,
I admit I'm a bit confused. Let me see if I understand where you're
coming from.
You have written a J2EE application that includes a session bean,
correct? If so, your session bean needs to be deployed to an EJB
container. What container are you using? The Oracle 9i database
has an embedded EJB container which (theoretically) you can use.
However, as far as I know, Oracle recommends you use OC4J as the
EJB container. So again I ask, what EJB container are you using?
If, as you say, you are new to EJB, then I think you should
immediately start working wiht OC4J as your EJB container.
Did you look at the tutorial link I gave in my previous post? It
explains -- step by step -- how to create, deploy and run a J2EE
application using OC4J as the EJB container. It also has links to
introductory material for people without little knowledge of J2EE
and EJB.
I have 9iAS Enterprise Edition and 8.1.7.1.0 database server (and
OC4J) installed on my SUN machine. I cannot find any of the
utilities you mention -- "j2eeadmin","runclient" or "deploytool".
What Oracle software have you installed? What are the versions?
What platform are you using?
A J2EE application (according to the specification from SUN)
consists of modules. A module can either be a client module or an
EJB module. A client module can either be a java application client
or a web-based client (servlet or JSP). A J2EE application usually
contains one client module and one EJB module. A J2EE application
needs to be deployed to a J2EE container.
Hopefully the J2EE picture is becoming clearer. I think you need
to read some introductory material regarding J2EE if you intend
to become proficient at it.
I feel that you are under the impression that a J2EE application
is a glorified JDBC application. It isn't (as far as I'm aware).
Good Luck,
Avi.

How can i migrate a single application from my old macbook to my new macbook

Can I migrate only single applications or files using the migration assistant? how?

I feel I've explained plenty what you must do but you aren't getting it.
All music on your old iPhone should be in your iTunes library on your computer. Transfer the music from your iTunes library on your computer to your new iPhone in the same way it was transferred from your iTunes library to your old iPhone - via the iTunes sync/transfer process.
Since you prefer the manual way, you must manually drag and drop the same 377 songs from your iTunes library to your new iPhone - in the same way the 377 songs were manually transferred from your iTunes library to your old iPhone.
Or you can sync which provides more options overall. Create an iTunes playlist for the 377 songs. Select Sync Music under the Music tab for your iPhone sync preferences with iTunes and choose selected playlists, artists, albums, and genres. Select the iTunes playlist below that includes the 377 songs followed by a sync.

How can one develop "view only" client applications in Lookout?This is to develop remote monitoring without control functionality.

How can one develop "view only" client applications in Lookout?This is to develop remote monitoring without control functionality.
We have 10 Client Nodes in the field and we need two "View Only" functionality in Client machines located on Supervisory Desks.

I have done this. There are many ways to approach this but I will offer what I think is the easiest. This will work ONLY if you have been assigning security levels to your objects (objects that actually control devices in the field) greater than zero AND allowing a security level of zero to view all panels. When I develop interfaces I do this just for creating a non control client.
Basically, you remove all users from the Lookout client in the user manager. You will not be able to remove the built-ins, "Guest" and "Administrator". Now when the end users tries to login using his normal login he will be denied. Consequently, he will not be able to control. But, he will still be able to view all the information since a no login can view a panel with a viewing se
curity level of zero. You must ensure any pushbuttons that are used to open panels have a security level of zero.
Now you can copy this security profile by finding the lookout.sec file and copying it to another non-control client computer. In Windows NT this file is located in the system32 directory.
There are many other ways but I find this the easiest.
Regards,
Tommy Scharmann

How can i use two monitors in my application?

Hello,
Background
I have a dual monitor card and two monitors which I want to use in my LabView application. The application gathers data from a complex sensor and calculates a number of results which need to be displayed graphically, this happens every 10 seconds or so. There is an awful lot of graphs which may be needed to be seen at some time but not routinely. The idea is that one monitor will display all the standard routinely displayed things and will not have any user input whilst the second monitor will display a tab control which has all the other graphs pickable.
Question
What I want to know is how I can programmatically tell labVIEW to put one vi up in one monitor and another vi in the other. I would then have them both maximised (which I know how to do). I would rather have the monitors set up as individual and that way I could keep the windows control bar on one monitor only. Thus one monitor would be a true user interface and the other simply a display.
Basically how do I tell LabVIEW to use one monitor for a specific vi and not the other.
The card I have is a matrox p650. Any comments would be appreciated.
Regards
Kevin

Hallo,
with new version of LV its more easy, but it also hasn't any troubles with LabVIEW 6.x or 7.x.
Especially with Matrox P650 you will get no any problems (we using
exactly this card together with G550 and our application supported
three monitors at the same time.).
I recommend to you following sequence:
- After installing driver turn on option for supporting different
resoluton on different monitors. As result you will get two absolutely
separate monitors.
- In Windows define which one is primary and which one is secondary.
(On primary monitor located taskbar and all messages dialog boxes will
appear.).
- Arrange secondary monitor in display properties - where he located (left from primary, or right)
- In your VI (which must appear on second monitor) use
FrontPanel.PanelBounds Property Node for positioning. You must set four
values for two corners. Easiest way to found right values is following:
read this property node in while loop and put indicator on front panel.
Then run VI, drag front panel onto second monitor and resize if
necessary, and then you will see right values for PanelBounds. You can
write this property node programmatically in run-time too.
hope it help,
good luck.

How can I monitor application errors?

hi,
How can i monitor and where in one place both the technical errors and application errors.
for example , if i have File -> XI -> RFC
and the RFC has errors where can i see this errors in one place?

Hi Udi,
The report RSALERTPROC does not need to run to deliver RWB alerts. These alerts are pushed directly to the receiver. Only if you want escalation processes or if you want to forward CCMS alerts to the Alert Mgmt. you need to schedule RSALERTPROC.
From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
You'll find more information about trouble shooting the alerting in SAP Note 913858.
Also go thru these links:
Alerts not getting triggered from Adapter Framework
Alert Configs...
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Regards,
Abhy

How can I send a message from database to a J2EE application?

How can I send a message from database to a J2EE application?
If I have a codetable in database that has new or modified values I have to refresh the codetable in my J2EE application.
Most effective way would be send a message to initiate a table reload from J2EE app, but I don't know how to do this.
Now I have a background thread that regular reads the table and looks for changes.

http://www.oracle.com/technology/products/integration/bam/10.1.3/TechNotes/TechNote_BAM_AQ_Configuration.pdf
This document details how to create triggers on a table that send out JMS messages.
In this example, the messages are going to Oracle BAM.. your message could go to your J2EE application listening to its own topic/queue.
an alternative idea.
you could also just cache your lookup table with something like Oracle Coherence and than try to ensure that all changes to the lookup go through Coherence, so that you won't need to do notification from the db up to the application. the application and the lookup data management tool would be using the data grid for management of the lookup table data, and the data grid (coherence) would persist the lookup data changes back to the db.

How can i protect J2EE applications from piracy?

I m looking for solution to protect Web application from piracy.
I want my application run on web server for which it is built, &
it musn't run on any other web server.
how can i protect my web application from piracy?.
Our .Net applications we protect using Hardware ID binding ,
How can i protect J2EE applications?

How is it going to get anywhere else? What's the threat model here? and what's the real, not imaginary, cost to you of the threat succeeding? and can you price your product such that it's cheaper to buy it than to pirate it?
The answers to this question probably aren't in the field of tricky code or cryptography. They're more likely in marketing, time-to-market, pricing, and in physical security of the server, ...

Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.

Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.
<Email Edited By Host>

These are user-to-user forums - I've asked the hosts to remove your email address from your post.
Tou can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Can i monitor only J2EE Application

Similar Messages

Maybe you are looking for