Can I remote admin Airport Extreme

I've always been interested in seeing if I can remote admin the AEBS and use the opportunity to VPN into one of my machines. I've been able to do it to my Dad's Netgear. How do I do it to my own router?

Yes you certainly can administer the Base Station remotely. Enable it using the Airport Utility -> Manual Setup -> Airport button -> Base Station tab -> check the box to "Allow configuration over ethernet WAN port".
On the remote Mac, run the Airport Utility and from the File menu select "Configure other" then enter the WAN IP address and admin password of the Base Station.
Setting up a VPN link into a computer on your private LAN is a completely separate issue with configuration issues that have nothing to to with the above.

Similar Messages

  • When connected to NETGEAR WNR1000, I can't remotely access Airport Extreme attached hard drive.

    I have a hard drive connected to my Airport Extreme at home and I am staying at a friend's place where I am connecting to the Internet via a NETGEAR WNR1000 router (which is routing a broadband-cable connection from Comcast Xfinity).
    When I am connected directly to the cable modem, the Airport Extreme's drives shows up in my Finder but when I'm connected via the NETGEAR router it doesn't show up.
    There must be some setting in the NETGEAR router that is blocking access but I've not got clue one what setting I need to adjust or change on the router.
    Could someone please advise me?

    I checked the NETGEAR router settings and it was not configured to block any services or sites. I did as you advised and set up Port Mapping/Forwarding from 548 to the IP assigned to my Mac but nothing showed up in the Finder (no Shared Devices etc).
    I then connected directly to the cable modem via ethernet and Shared Devices showed up in my Finder window with my Airport Extreme. I connected to one of the drives connected to the AEBSn, then unplugged the ethernet and connected the NETGEAR back to the cable modem and thus my MacBook Pro was connected via WiFi to the NETGEAR router and to the Internet.
    Shared Devices disappeared from my Finder window, BUT the HD I had connected to remained connected. It was listed under my MacBook Pro's name (3rd item after the local HD, "Network"). The icon is a blue and white drive with the WiFi logo on it.
    I verified that I could access the files on this remotely connected drive and did a Get Info and in the window that popped up it said "Server: afp://MilkBar._afpovertcp._tcp.malckwan.members.mac.com/Untitled%2001".
    I tried to use the Connect To (Cmd-K) to connect to another drive attached to the AEBSn (Untitled%2002) using the same formatted address but could not connect.
    PS. I did verify that I was mapping Port 548 to the current IP assigned to the MacBook Pro.

  • Can I use two airport extreme base station on the same network

    Can I use two airport extreme base station on the same network

    Here is my network setup:
    D-Link DCM-202 simple cable modem (DOCSIS 2.0 compliant)
    attached via ethernet to
    5th generation AirPort Extreme Base Station - Main (Bought last week)
    attached via ethernet to
    4th generation AirPort Extreme Base Station - Remote (Bought about 11 months ago)
    The main AEBS is set to:
    AirPort Section:
    Base Station Tab -> Allow setup over WAN is CHECKED
    Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
    Internet Section:
    Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Share a public IP address
    TCP/IP Tab -> Configure IPv4: Using DHCP
    DHCP Tab -> DHCP Beginning Address: 10.0.1.2, DHCP Ending Address: 10.0.1.200, DHCP Lease: 24 hrs
    NAT Tab -> The box following 10.0.1. is left blank, Enable NAT Port Mapping Protocol box is CHECKED.
    The remote AEBS is set to:
    AirPort Section:
    Base Station Tab -> Allow setup over WAN is CHECKED
    Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
    Internet Section:
    Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Off (Bridge Mode)
    TCP/IP Tab -> Configure IPv4: Using DHCP, IP Address: 10.0.1.2, Subnet Mask: 255.255.255.0, Router Address: 10.0.1.1, DNS Server(s): 10.0.1.1  (Everything else under this tab is blank)
    Hope this helps with info needed.

  • Silly question, maybe. I want to change from Verizon DSL to cable, but cable company doesn't supply router.  can I use my Airport Extreme as wireless router?

    We currently have the following wireless home-network configuration, powered by Verizon DSL. 
    2 macbook pro’s
    1 emachine
    HP PhotoSmart 6122 all-in-one printer
    Apple TV
    Apple Airport Extreme Base Port A 1408
    Westell 7500 router
    Thinking I’d get wider wireless coverage throughout my 2 bedroom home, I purchased the Airport Extreme. It is connected to the router via its sole usb port.  The result was only a tiny increase in speed, and no increase in coverage, so I don’t know why I have it.
    We now want to change from DSL to cable, thus ditching Verizon.  Our new cable provider supplies the cable box, but no router for wireless networking. 
    Here are my questions.
    Can I use the Airport Extreme (AE) as a wireless router? 
    If so, how should I hook it up?  Should the usb cable go from the AE to the cable box, and all the other devices connect wirelessly?
    If not, how should I be using the AE to some advantage?  What can I get out of the investment?
    Thank you very much for your help!  Beatriz

    What I wrote has nothing to do with what the cable company charges for their installation. And, usually they will help with the router setup even if you supply your own router. I don't know what they will charge for the modem.
    Note that you need to get just a modem. You don't want a modem/router combination. That will make using an AEBS effectively nearly impossible. You will need to ask specifically for just a standalone modem, and that you will supply your own router.

  • Can I use an airport extreme to extend the range of my wireless modem

    Can I use an Airport Extreme to extend the range of my wireless modem?
    At one end of my house I have a dual band wireless ADSL modem which provides my internet connection and I want to extend (improve) the wireless coverage to the other of the hosue where my Apple TV (2nd gen) is located. I have being trying to extend my wireless network with an Airport Extreme but so far without success. I can get the Airport to join the wireless network, but I suspect that it is only acting as another client and not actually extending the wireless range. There is a setting in the Airport configuration to "extend and existing network", however when I choose this option the Airport no longer connects to my existing wireless network and I am beginning to suspect that this fuction only works with another Apple device (Airport Extreme or Express).
    Has anyone been able to extend the range of a third party wireless router / modem with an AirPort Extreme? If so, any advice that you can offer wold be appreciated.
    Regards
    Michael

    Thanks Tesserax,
    Your answer has confirmed my suspicions.
    Option 1 from your suggested solutions is not a goer because the modem and Airport Extreme are in different parts of the house making it impractical to run a cable between the two devices. 
    I did try option 2 and bought a Netgear range extender, which according to Netgear it would work with my D-Link modem - not.
    However I have managed to work around the problem (sort of) by using the Airport Extreme to create a wireless network between my iMac 27 and my Apple TV. The idea is that the iMac will act as a router between ethernet connected ADSL modem and the wirelessly connected Apple TV.
    The good news is that I am now able to play the content from my iTunes library on my Apple TV without interruptions due to a poor wireless connection . Although the connection from the Apple TV to the internet is not working I think this is most likely just a configuration issue and for me it is not really a show stopper.

  • HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

    How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
    Thank you for any help you can provide.
    Arup

    This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
    In the meantime..
    Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
    With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
    ie
    You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
    Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

  • Where can i buy an airport extreme card for my powerbook

    Where can I buy an airPort extreme caed for my powerbook? are they even available, if not how can I go wireless ?

    eBay is a good source, though as ever, buy wisely and make sure you get the right card for your specific model.
    Alternatively there are wireless cards available that go in the card slot. Again eBay is full of them but be sure they're OSX compatible -  its a good idea to put this phrase in your search terms.
    I can vouch that this one works as I'm using it now:
    http://cgi.ebay.co.uk/SAGEM-PCMCIA-AIRPORT-54MBPS-WIRELESS-WIFI-CARD-MAC-OS-X-/4 00124141388?pt=UK_Computing_Apple_Mac_Accessories&hash=item5d2941df4c#ht_3229wt_ 886
    It just plugged straight in and was recognised as an Airport Card. This is from the UK site but I'm sure you can find the same thing wherever you live, or at that price just have it shipped.

  • I can not get my Airport extreme to login to my Drobo exterior HD. Any thoughts?

    I can not get my Airport extreme to login to my Drobo exterior HD.., although it definitely recognizes  it.
    Any thoughts?

    First check to make sure that you have the correct versions of Apple products to do what you want. The AirPort Extreme (AEBS), needs to be the "square" version with rounded corners, not the older round, domed shaped AEBS.
    Next, the AirPort Express (AX) must be the newer "n" version of the product. Check the label on the side of the AX for the model number. This needs to be Model No A 1264.
    Next, using AirPort Utility on your PC, select the AEBS and click Manual Setup. Then click the Wireless tab below the icons. Make sure that a check mark is entered next to "Allow this network to be extended"
    Then check the AX using Manual Setup. Click the Wireless tab to check that the setting for Wireless Mode is "Extend a wireless network" and that there is a check mark next to "Allow wireless clients"
    Reference....Apple Support Document http://support.apple.com/kb/HT4259 for complete step by step instructions.

  • I enabled the guest network feature on my time capsule.  Can I configure my airport extremes guest network feature if I use this as a network extender using a "roaming" network?

    I enabled the guest network feature on my TC.  Can I configure my airport extremes guest network feature if I use the extreme as a network extender connecting my Airport Extreme to my TC via ethernet cable?

    Unfortunately no, since the AirPort Extreme should be configured in Bridge Mode if it is connecting to the Time Capsule using an Ethernet connection.
    The Guest Network option cannot be enabled when the AirPort is configured in Bridge Mode.
    Another way of saying the same thing is that the Guest Network cannot be "extended" either by using an Ethernet connection or wireless. It is only available from the Time Capsule "main" wireless router on your network, not any extending devices.

  • Can i use an airport extreme card in a powerbook 400MHz ?

    i have an older powerbook 400MHz which is second hand and i have no manual for it. does anyone know if i can install an airport extreme card?
    powerbook G4   Mac OS X (10.3.9)  

    wcslingsby, Welcome to the discussion area!
    No you can not use an AirPort Extreme card with your PowerBook.
    Your PowerBook G4 400 MHz requires the original AirPort card.

  • Can i use my airport extreme as a modem with comcast

    can i use my airport extreme as a modem with comcast cable

    No, since there is no modem on board an AirPort Extreme, so you will need to use an outboard modem if you want the AirPort Extreme to have Internet access.

  • Can I use the airport extreme with a random router?

    Can I add an AirPort extreme to an existing network and have a laptop play iTunes music to a stereo? I'd like to not drop 200 bucks on a new router. Thanks for any help!

    I don't agree. I have a 2wire router for my Qwest DSL and I cannot get Airport Express to work properly. I cannot use any encryption, so I am taking the AE back tomorrow. I posted a question here, but no one answered it, and I've been chastized for bumping posts in the past.
    I'm very disappointed with my experience, and the lack of information on the packaging for the AE.

  • Can't connect to airport extreme with my Sony Vaio laptop - don't have airport utility disc, how do I get connected?

    My main home computer is an imac and all devices are apple. I do have however a sony Vaio laptop for work and I cannot get it to connect at home to the airport extreme wireless network. Can I get an airport extreme utility disc to install manually?
    Roooble

    You can download the Apple Airport Utility directly from Apple:
    http://support.apple.com/kb/DL1547?viewlocale=en_US&locale=en_US
    Regards,
    Shawn

  • Can't join the airport extreme network with my iphone~~please help

    Can't join the airport extreme network with my iphone

    What radio mode do you have the 802.11n AirPort Extreme Base Station (AEBSn) configured for? (ref: AirPort Utility > Select the AEBSn > Manual Setup > AirPort > Wireless > Radio Mode = ?)

  • Can I use my Airport Extreme as a wireless bridge?

    Can I use my Airport Extreme as a wireless bridge?

    When you say "wireless bridge", I assume that you want the AirPort Extreme to receive a wireless signal and provide an Ethernet output, correct?
    If you have another Apple router providing your "main" wireless network, the AirPort Extreme could possibly be configured to "Extend a wireless network".
    In that setting, the Extreme provides more wireless coverage and Ethernet ports are enabled, so you could connect an Ethernet device that way.
    But, the AirPort Extreme cannot do this with a product from another manufacturer.
    So, in order to answer your question specifically, can you provide the make and model number of your "main" router?

Maybe you are looking for

  • How do I use Firefox Sync data from my Android phone to restore data to my desktop browser?

    I was attempting to cull some history, Firefox became non-responsive and had to be force closed. When it was re-opened, all my tabs which are typically restored were missing and I did not have the option to restore the session. According to sync on m

  • Why is the video of the person I'm Skyping with pixelated?

    I was Skyping with my boyfriend on my iPhone and never had a problem with Skype until a few days ago. I asked him if my picture on his side was pixelated and he said no that everything was clear even his picture. But on my side his video was pixelate

  • XML message is not processed in SXMB_MONI

    In SXMB_MONI txn code (PI 7.0),we are not able to get updated with any XML messages from a folder on application server what could be a reason for this problem..can we see the log details of the same from anywhere .How can we rectify this problem I w

  • Content pane acting wacky

    OK, i am trying to use JPanel to put all of my buttons on the bottom of the screen. I got that part to work, but when ever I add a textField to the content pane, the label disappears and the textField is never visible. Here is my code.           Cont

  • Imovie 09 transitions glitch with (.MOV) files

    Hi Guys, Anyone help please - *imac just about to go out the window and wife very fed up of foul language!* I have been successfully creating movies in imovie HD for a number of years and have recently updated to imovie 09. At the same time I have pu