Can I transfer an e-book from my Mac laptop to my iPhone? I have installed the iBook app, but don't know if I can transfer my e-books..
Can I transfer an e-book from my Mac laptop to my iPhone? I have installed the iBook app, but don't know if I can transfer my e-books.
Be careful with the transfer talk. Keynote for the pad and the mac are slightly different- so make sure the template they plan to sell you will work on the pad, as opposed to a mac.
If you can get it as a file, you can e mail it to your self, or stick it in drobobx and bring it down, or use your normal syncing device.
How are you syncing your pad now, with a PC?
if they are selling it for the pad, they must have a way to get it to you. So spend some time on their website and see if they have some good instructions for you.
Similar Messages
-
I am new to iPad and have downloaded the Nook app. How do I use it to read the Nook books are that in my account from Barnes&Noble?
From http://www.barnesandnoble.com/ebooks/help-faqs.asp#NOOKapp
How do I download my books to my device? I get a message "Safari cannot Download".Launch the NOOK app software to trigger the automatic syncing of your purchases to your device. You can also manually tap the 'gear' button in the lower right-hand corner of the navigation bar and then hit Account Settings. This will open a screen to allow you to enter your login information which includes your account name and password. Press Go and your information will be verified and then the contents of your on-line NOOK Library will be listed for you. Then just browse your book listings and tap on the book you'd like to download to your device. A popup will confirm your request. Press OK and the book will download to your device in the background, and you'll be notified when it has finished downloading. -
I don't understand how to transfer my email contacts from my Windows laptop to my iPhone? What do I need to do?
Hey wahanz!
In order to sync your Windows contacts to your iPhone, you will need to first create an iCloud account:
Creating an iCloud account: Frequently Asked Questions
http://support.apple.com/kb/ht4436
You will create the iCloud account on your iOS device, and when you do, don’t forget to turn on contact syncing in the initial setup. Then you will want to download the iCloud control panel for Windows onto your computer and install it:
iCloud Control Panel 3.1 for Windows
http://support.apple.com/kb/dl1455
Make sure that your contacts are in Outlook, as that is the supported way of syncing your contacts to iCloud, then make sure you have the contact syncing enabled in the iCloud control panel on your computer, and when the contacts have synced, they will be available on your iOS device! Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Can I export my itunes library from my mac to my girlfriends iphone permanently?
Try this method, this should solve your problem! Just export the library to the external hard drive and import it on her computer! Check the link!
Should solve your query
http://gizmodo.com/5825217/how-to-keep-your-itunes-library-when-it-wont-fit-on-y our-hard-drive -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
I'm new to the Apple world so bare with me. I have an iPhone4S and an iPad2. I want to buy the numbers app but want to know it I buy it can I use the app on both devices? Thx
mikefromboth ell wrote:
I'm new to the Apple world so bare with me. I have an iPhone4S and an iPad2. I want to buy the numbers app but want to know it I buy it can I use the app on both devices? Thx
From the iTunes Store, yes, all your iOS devices running on the same account will qualify.
Jerry -
Is there anyway to open a mobi format book on ipad without installing the kindle app but any other app
Have you tried GoodReader? It claims to handle very large file sizes and it's very good for annotations. It's my PDF reader of choice on the iPad
From the GoodReader manual:
File types to view in GoodReader
There are two types of viewing engines - the ones that we've written ourselves, and the built-in device's standard viewing engine. Our own engines provide great flexibility and many additional features not found in the built-in engine (for example, opening very large files). The built-in engine is very powerful and knows many file formats, but has many limitations and no additional features.
Files of very big size (our own viewing engine):
very large PDF files (including password-protected). File size is not the limit. Revolutionary PDF Reflow (Extract Pure Text) mode. See Viewing PDF Files for details.
very large TXT files. See Viewing TXT Files for details.
high-resolution pictures and other graphic files (including slideshow viewing mode). See Viewing Pictures for details.
And as a free bonus - files of normal size (iOS standard viewing engine):
all file formats supported by Safari engine: Microsoft Office files - Word, Excel, PowerPoint, HTML files and Safariwebarchives
iWork'08/09 files - Pages, Numbers, Keynote (files must be saved with Include Preview option)
.ai files saved with PDF Compatible option
audio files (natively supported by iOS)
video files (natively supported by iOS) -
Can multiple iPhones share one iTunes without syncing the phones together? We just got new iPhones and set up seperate apple id's, but don't know if we can both sync to our existing iTunes without linking our phones together (contacts, apps, etc) ????
How to use multiple iPods, iPads, or iPhones with one computer
-
I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
I JUST NEED HELPI would contact Apple under your warranty. I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod.
-
Can someone please help. I have a really old MacBook that is running really slow. I want to wipe everything and reinstall the latest software but don't know how to do this. Also is there a way of keeping Microsoft Office when doing this? Thanks in advance
You do realise that wiping the disk means that everything on the disk is erased. Everything. Photos, music, emails, ...
So the first piece of advice is to make sure you have a back up of everything.
You need the OS disk to reintsall the operating system. You will use that disk first to erase the drive, then to reinstall the OS.
Here's the link for the US. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
As for MS Office, you will need the original disk that it came on to reinstall it. -
I have installed the iAS 9i,but how can I launch the Portal?I can't found it,but I ..
I have installed the iAS 9i,but how can I launch the Portal?I can't found it,but I have selected that component when installing...?
Which version of 9ias have u installed
if it is rel 2 u have to install first 9ias infrastructur and then portal.
portal can be access at http://hostname.port/pls/portal
where hostname and port is where u have installed the portal and the port number where apache listens
good luck
[email protected] -
I want to find my ipad but don't know how. Can I use the Cloud to do this?
I want to find my ipad but don't know how. Can I use the Cloud to do this?
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
Cheers, Tom -
I received photoshop elements 11 as a gift 2 years ago. I am fearful that I have lost the serial number. I have the box and the sleeve but neither have a serial number. I have installed the trial version, but hope I can add a serial number. Any suggestions?
If you never bought the product then you cannot get the serial number.
-
I have an older airport express, but don't know where to look to find its model number.
The version number is airport utility 6.3.4 (634.17).
Can anyone point me in the right direction? Thanks.Hard to see it's so teeny. I needed a magnifying glass.
FWIW, you should not mark your reply as Solved because you did not solve your question. Helpful and Solved are used to reward the user who help you or solved your problem. -
I have downloaded the Instagram App but i can't open and find it in my MacBook
i have downloaded the Instagram App but i can't open and find it in my MacBook?
Itunes does not sell any apps at all for your computer. Itunes only sells ipod/iphone/ipad apps.
Maybe you are looking for
-
Unable to receive email in HTML format on BB Torch 9860 with BIS
I recently purchased BB Torch 9860 with OS 7 and configured by personal and work email on BIS. I am receiving emails only in text format. In some emails with images that have hyperlink, I just see a link and images not displayed. All the images comes
-
How can I remove all photos and directories from iPhoto?
How can I remove all photos and directories from iPhoto as if it was a brand new install? I am new to iPhoto and was unaware of how it works, honestly I still am a little confused as to when pics I am using 1/2 the time, some from iPhoto and some fro
-
Airport Express extending network needs to be restarted daily
I'm having a really annoying problem with my Airport network. Here's the configuration: Den: Latest generation simultaneous Dual-Band Airport Extreme Living Room: older 802.11g Airport Express used only for AirPlay Office: older 802.11n Airport Expre
-
Is there anyway to remove some of the simulation profiles in output preview. All I really need is "U.S. web coated (swop). After a straight export from InDesign or Quark my PDF is at U.S. web coated (swop). But when i ran the PDF through our Esko or
-
Conversion of planned order into process order not respecting F-S
Hi Experts, I am working in Upgrade project from 4.6c to ECC 6 . I have an isuue in PPPI I have a process order which has to be converted to process order . This operation should take place by phase 210 first then phase 300 . But in our case the Phas