Can I update startup.exe on an FP-2000 w/o Labview?

I want to set up a Fieldpoint system (FP-2000) with a program that runs automatically, and place it at a customer's site that has no internet access or Labview development system. Then, I'd like to be able to update the startup.exe file and any support files that are required. I've tried to simulate this by switching between 2 versions of the application through FTPing a new startup.exe file, but I lose the capability to run automatically when I do this. A better path would be to build an installer with application builder that would set up the FP-2000 directly from a non-labview computer, but I'm pretty sure that won't work. Worst case it might be possible to ship the FP-2000 back to me for upgrade, but I'd rather
ship software. Any suggestions? Thanks!

James S,
Thank you for using the discussion forums here at ni.com. Rather than building the executable on your host PC, I suggest the following course of action:
First, build the executable on one of the FP-2000's in your possession. Next, ftp the contents of the NI-RT/STARTUP/ directory to your host machine. These files can then be ftp'd to the corresponding directory on the desired FP-2000.
Before attempting this, you should verify that the firmware is the same version on both FP-2000s used.
Regards,
Michael Shasteen
Industrial Automation Support
National Instruments
www.ni.com/ask

Similar Messages

Msconfig.exe- startup: disable Adobe CS Serv Mgr and Adobe Updater Startup Utility

Can I safely untag
Adobe CS6 Service Manager
and
Adobe Updater Startup Utility
in the Startup panel under Windows 7 -> MSConfig.exe ??
I am trying to figure out why my pc freezes.
Everything is okay, no eventlog errors, temperatures, drivers, whatever ...
I already disabled startup things and now want to do this for Adobe as well.
Thanks

Thanks
Also disabled AcroTray - will see what happens.
Have no idea what is used for.
=
=

Can we rename the startup.exe for LV-RT?

I've read all the faq's for building the startup.exe for RT embedded targets, however I need to ask, is there a way to use a name OTHER than startup.exe? One single generic name is not meaningful enough to describe what the code is actually doing, or what revision it is.
The application builder does not allow for anything other then startup.exe when target to an RT device, but I've noted in ni-rt.ini there is a line for RTTarget.ApplicationPath=c:\ni-rt\startup\startup.exe, and have tried to alter this entry, and rename the startup.exe manually, yet the application will not launch.
Does anyone know of a fix/workaound ?

Following up with Greg..yes I was able to change the target options-misc name, and use app builder to build an EXE other than startup, and the target did properly boot and run it. I compiled the same vi with 2 different names, and tried to switch between them by altering the RTTargetApplicationPath key in ni-rt.ini, and it would not run...so the next question is..is there something else that needs to be changed, or is this only something you can do with appbuilder? The targets I support are not co-located and are not on any network, and I can't go to them to generate a build with every rev...but being limited to a single name is troublesome.
-Jason

The Startup Disk is almost full, I can't update.

I'm a high-school student, I got my MACBOOK pro 15-inch about a year and a half ago.
I've loved it ever since lately, I can't update things. So I keep crashing and the reason I can't update things is because my 'start up disk is full'.
I've done searches on this discussion board but it seems when I type in start up disk it shows it like it's a DISK.
I'm really confused here, and no I'm not MACchallenged, I'm just Leopard OSX challenged I guess.
I really don't like the update.
I wish I never got Leopard, the photobooth ***** now.
It's slow and it pauses. But maybe this is because my 'startupdisk' is almost full. And I need to free memory.
But what is that anyways?
HELP!

You need at least 15% free space on your hard drive. So, the solution is to remove files. Get an external hard drive and begin.

HP Officejet 4255 driver for Windows 7, 32 bit. Not in pull up list or OS(can't update)

HP Officejet 4255 driver for Windows 7, 32 bit.
Driver is not in pull up list and not in OS(can't update OS basic). Almost all series are listed but 4200 series is missing.
After upgrade to Windows 7, it has become a problem. Some solution should be given.
Can someone help?
Regards,
Raul

Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
I tried again the GPS, and it wasn't working.
Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
Result: now GPS is working (same place, same conditions, just 5 minutes later)!
Don't know where the difference is...
600, R52, T61p, X301

HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

I can't update iTunes. It says "The feature you are trying to use is on a network resource that is unavailable...

I can't update iTunes. It says the feature you are trying to use is on a network resource that is unavailable.

It says Click Ok to try again or enter an alternate path to a folder containing the installation package itunes64.msi in the box below
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Can't update quicktime on windows xp. Try to install 7.7.3 and it says I have a newer version installed. I don't of course, I have 7.3.1. Have never been able to update it. Even uninstalling older version it still says a newer version is already installed

Can't update quicktime on windows xp. I have 7.3.1 and when I try to install 7.7.3 it says I have a newer version already installed??? Even uninstalling the older one, it still says the same thing. I haven't been able to update it since 2007.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATION" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up").
In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC. Now try another QuickTime install. Does it go through properly this time?

Can't update from 10.8 to 10.8.2 on Macbook Pro Retina 15" (restored from old Macbook Pro 13")

So I bought the new Macbook Pro Retina 15" and restored from my Macbook Pro 13". Everything is good except that when I go to AppStore to update other Apps it says I need the latest 10.8.2 update but that doesnt' even show up. Is there some new update coming out soon that will resolve my problem?

If the 10.8.3 comes out and I can't update it from the AppStore, then I'll try your original method you wrote "
Boot to the Recovery HD partition, Command+r at startup, and select Reinstall Mac OS"
But with that method, do I keep everything or will I lose everything? If it keeps it, I can do that right now then.
Thanks!!!

Can't Update CS4 on New Laptop Running Windows 7 64bit

I just upgraded a 2 year old slow laptop running 32 bit Vista to a brand new Asus G73JW laptop running Windows 7 64 bit. It is a really fast laptop with 8G RAM, 1.5GB dedicated graphics card, full 1920 x 1080 HD res, solid state drive for operating drive etc. It is a beast of a laptop that boots up fully in about 10 seconds and it was built for HD gamers. Needless to say I am pretty excited to get to work on my favourite Adobe software, which is Premiere Pro and Photoshop mostly.
Everything on the laptop works great but... I installed my CS4 Production Premium without a problem, however, the Adobe Updater will not work. I tried it about 10 times now, rebooting, trying various programs to try the updates etc, to no avail. They are very important updates, as the software will not function properly in several programs without the updates. I can't find anything about this specific issue, has anyone had this problem with Windows 7 64 bit?
FYI everything worked fine with the Vista 32 bit, including updates.
I am pretty frustrated now and I just want to start using the software, and I would really appreciate any suggestions anyone may have.
I already have an e-mail in to Asus to find out if the latest NVidia GTX 460M graphics card driver can be updated on my system. There are a few other drivers I am looking into updating as well to see if that will help.
Thank you in advance,
Aaron

All Adobe updates start here and select product, install in number order, updates may not be cumulative http://www.adobe.com/downloads/updates/
As to your overall problem, Win7 has a lot of automatic security settings that you may need to fix
I don't know what those may be, but some general information...
More Tips http://windowssecrets.com/comp/110127
Utilities http://windowssecrets.com/comp/110106 (Soluto for startup)
Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
Win7 Configuration Article http://windowssecrets.com:80/comp/100218
Win7 Monitor http://windowssecrets.com:80/comp/100304
Win7 Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm
Win7 Virtual XP http://www.microsoft.com/windows/virtual-pc/
More on Virtual XP http://blogs.zdnet.com/microsoft/?p=5607&tag=col1;post-5607
Win7 Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
Win7 Adobe Update Server Problem http://forums.adobe.com/thread/586346?tstart=0
An Adobe Win7 FAQ http://forums.adobe.com/thread/511916?tstart=0
More Win7 Tips/FAQ http://forums.adobe.com/thread/513640?tstart=0
Processes http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
Win7 God Mode http://forums.adobe.com/thread/595255?tstart=0
CS5 Install Error http://forums.adobe.com/thread/629281?tstart=0
CS5 Help Problem http://kb2.adobe.com/cps/842/cpsid_84215.html
Win7 and Firewire http://forums.adobe.com/thread/521842?tstart=0
http://lifehacker.com/5634978/top-10-things-to-do-with-a-new-windows-7-system
http://www.downloadsquad.com/2009/05/29/7-free-windows-7-tweaking-utilities/
Win7 64bit Crashing and "a" fix http://forums.adobe.com/thread/580435?tstart=0
http://prodesigntools.com/if-any-problems-downloading-or-installing-cs5.html
Harm's Tools http://forums.adobe.com/thread/504907
Also http://www.tune-up.com/products/tuneup-utilities/
Also http://personal.inet.fi/business/toniarts/ecleane.htm

Can't update AIR, asks EULA forever.

Can't update AIR. I'm using htc sync and each time I try to update AIR aks to accpet EULA. There is a problem in the Windows log . As my W7 is in spanish the message is in spanish.
I also attach the last lines of the air log.
[2013-01-08:18:14:32] begin quitting
[2013-01-08:18:14:38] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:14:38] Commandline is: -update "c:\program files\htc\htc sync 3.0\ui\htc.exe"
[2013-01-08:18:14:38] Installed runtime (2.0.3.13070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:14:38] Installed app (HTC.388BC06ACDAB6261375BCE37FBA2E023C0D7EE34.1) located at c:\program files\htc\htc sync 3.0\ui\htc.exe
[2013-01-08:18:17:47] Relaunching with elevation
[2013-01-08:18:17:47] Launching subprocess with commandline c:\users\pablo\appdata\local\temp\aire5ce.tmp\adobe air installer.exe -ei
[2013-01-08:18:17:47] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:17:47] Commandline is: -stdio \\.\pipe\AIR_7728_0 -ei
[2013-01-08:18:17:47] Installed runtime (2.0.3.13070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:17:48] Starting silent runtime update. Updating runtime from version 2.0.3.13070 to version 3.2.0.2070
[2013-01-08:18:17:48] Installing msi at c:\users\pablo\appdata\local\temp\aire5ce.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
[2013-01-08:18:17:51] Runtime Installer end with exit code 0
[2013-01-08:18:17:51] Elevated install completed
[2013-01-08:18:17:53] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-08:18:17:54] Launching subprocess with commandline c:\program files\htc\htc sync 3.0\ui\htc.exe
[2013-01-08:18:17:54] Runtime Installer end with exit code 0
[2013-01-08:18:17:54] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
[2013-01-08:18:17:55] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:17:55] Commandline is: -eula
[2013-01-08:18:17:55] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:17:56] Starting eula display
[2013-01-08:18:18:13] Finished eula display
[2013-01-08:18:18:13] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-08:18:18:13] Runtime Installer end with exit code 0
[2013-01-08:18:18:13] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
[2013-01-08:18:18:54] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
[2013-01-08:18:18:54] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:18:54] Commandline is: -eula
[2013-01-08:18:18:54] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:18:55] Starting eula display
[2013-01-08:18:18:59] Finished eula display
[2013-01-08:18:18:59] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-08:18:18:59] Runtime Installer end with exit code 0
[2013-01-08:18:18:59] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
[2013-01-08:18:19:16] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
[2013-01-08:18:19:16] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:19:16] Commandline is: -eula
[2013-01-08:18:19:16] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:19:17] Starting eula display
[2013-01-08:18:19:40] Finished eula display
[2013-01-08:18:19:40] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-08:18:19:40] Runtime Installer end with exit code 0
[2013-01-08:18:19:40] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
[2013-01-08:18:43:16] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:43:16] Commandline is: -arp:uninstall
[2013-01-08:18:43:16] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:43:18] Relaunching with elevation
[2013-01-08:18:43:18] Launching subprocess with commandline c:\program files\common files\adobe air\versions\1.0\resources\adobe air updater.exe -eu
[2013-01-08:18:43:18] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:43:18] Commandline is: -stdio \\.\pipe\AIR_4184_0 -eu
[2013-01-08:18:43:18] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:43:18] Starting runtime uninstall. Uninstalling runtime version 3.2.0.2070
[2013-01-08:18:43:19] Uninstalling product with GUID {47FA2C44-D148-4DBC-AF60-B91934AA4842}
[2013-01-08:18:43:22] Runtime Installer end with exit code 0
[2013-01-08:18:43:22] Elevated install completed
[2013-01-08:18:43:22] Runtime Installer end with exit code 0
[2013-01-08:18:51:57] performing a silent runtime install
[2013-01-08:18:51:58] UI SWF load is complete
[2013-01-08:18:51:58] starting install
[2013-01-08:18:51:58] Scheduling runtime installation operations
[2013-01-08:18:51:58] Scheduling an MSI install operation
[2013-01-08:18:51:58] Beginning runtime installation
[2013-01-08:18:51:58] Beginning install
[2013-01-08:18:51:58] Installing c:\users\pablo\appdata\local\temp\air147c.tmp\setup.msi
[2013-01-08:18:52:01] Copying C:\Users\Pablo\AppData\Local\Temp\AIR147C.tmp\Adobe AIR\Versions\1.0\Resources\airappinstaller.exe to C:\Users\Default\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com\bin\airappinstaller\airappinstaller.exe
[2013-01-08:18:52:01] Copying C:\Users\Pablo\AppData\Local\Temp\AIR147C.tmp\Adobe AIR\Versions\1.0\Resources\digest.s to C:\Users\Default\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com\bin\airappinstaller\digest.s
[2013-01-08:18:52:01] Execution complete; beginning commit phase
[2013-01-08:18:52:01] Commit complete
[2013-01-08:18:52:01] install complete
[2013-01-08:18:52:01] begin quitting
[2013-01-08:18:56:39] UI SWF load is complete
[2013-01-08:18:56:40] UI initialized
[2013-01-08:18:56:44] Pingback request completed with HTTP status 200
[2013-01-08:18:56:44] Begin background update check
[2013-01-08:18:56:44] Starting download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.0.3.13070/update
[2013-01-08:18:56:45] Background update successfully downloaded
[2013-01-08:18:56:46] User notified of available background update
[2013-01-08:18:56:46] runtime install entering error state: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: can't access property in unloaded application" errorID=0]
[2013-01-08:18:57:06] begin quitting
[2013-01-08:18:57:36] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:57:36] Commandline is: -silent
[2013-01-08:18:57:36] Installed runtime (2.0.3.13070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:57:36] Starting silent runtime update. Updating runtime from version 2.0.3.13070 to version 3.2.0.2070
[2013-01-08:18:57:37] Installing msi at c:\users\pablo\appdata\local\temp\air400e.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
[2013-01-08:18:57:42] Runtime Installer end with exit code 1
[2013-01-08:19:07:11] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
[2013-01-08:19:07:12] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:19:07:12] Commandline is: -eula
[2013-01-08:19:07:12] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:19:07:14] Starting eula display
[2013-01-08:19:07:49] Finished eula display
[2013-01-08:19:07:49] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-08:19:07:49] Runtime Installer end with exit code 0
[2013-01-08:19:07:49] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
[2013-01-08:19:08:20] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
[2013-01-08:19:08:20] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:19:08:20] Commandline is: -eula
[2013-01-08:19:08:20] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:19:08:21] Starting eula display
[2013-01-08:19:08:50] Finished eula display
[2013-01-08:19:08:50] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-08:19:08:50] Runtime Installer end with exit code 0
[2013-01-08:19:08:50] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
[2013-01-08:19:09:05] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
[2013-01-08:19:09:05] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:19:09:05] Commandline is: -eula
[2013-01-08:19:09:05] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:19:09:06] Starting eula display
[2013-01-08:19:09:31] Finished eula display
[2013-01-08:19:09:31] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-08:19:09:31] Runtime Installer end with exit code 0
[2013-01-08:19:09:31] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
[2013-01-09:00:25:22] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
[2013-01-09:00:25:22] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-09:00:25:22] Commandline is: -eula
[2013-01-09:00:25:22] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-09:00:25:23] Starting eula display
[2013-01-09:00:25:27] Finished eula display
[2013-01-09:00:25:27] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-09:00:25:27] Runtime Installer end with exit code 0
[2013-01-09:00:25:27] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)

Can't update AIR. I'm using htc sync and each time I try to update AIR aks to accpet EULA. There is a problem in the Windows log . As my W7 is in spanish the message is in spanish.
I also attach the last lines of the air log.
[2013-01-08:18:14:32] begin quitting
[2013-01-08:18:14:38] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:14:38] Commandline is: -update "c:\program files\htc\htc sync 3.0\ui\htc.exe"
[2013-01-08:18:14:38] Installed runtime (2.0.3.13070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:14:38] Installed app (HTC.388BC06ACDAB6261375BCE37FBA2E023C0D7EE34.1) located at c:\program files\htc\htc sync 3.0\ui\htc.exe
[2013-01-08:18:17:47] Relaunching with elevation
[2013-01-08:18:17:47] Launching subprocess with commandline c:\users\pablo\appdata\local\temp\aire5ce.tmp\adobe air installer.exe -ei
[2013-01-08:18:17:47] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:17:47] Commandline is: -stdio \\.\pipe\AIR_7728_0 -ei
[2013-01-08:18:17:47] Installed runtime (2.0.3.13070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:17:48] Starting silent runtime update. Updating runtime from version 2.0.3.13070 to version 3.2.0.2070
[2013-01-08:18:17:48] Installing msi at c:\users\pablo\appdata\local\temp\aire5ce.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
[2013-01-08:18:17:51] Runtime Installer end with exit code 0
[2013-01-08:18:17:51] Elevated install completed
[2013-01-08:18:17:53] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-08:18:17:54] Launching subprocess with commandline c:\program files\htc\htc sync 3.0\ui\htc.exe
[2013-01-08:18:17:54] Runtime Installer end with exit code 0
[2013-01-08:18:17:54] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
[2013-01-08:18:17:55] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:17:55] Commandline is: -eula
[2013-01-08:18:17:55] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:17:56] Starting eula display
[2013-01-08:18:18:13] Finished eula display
[2013-01-08:18:18:13] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-08:18:18:13] Runtime Installer end with exit code 0
[2013-01-08:18:18:13] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
[2013-01-08:18:18:54] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
[2013-01-08:18:18:54] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:18:54] Commandline is: -eula
[2013-01-08:18:18:54] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:18:55] Starting eula display
[2013-01-08:18:18:59] Finished eula display
[2013-01-08:18:18:59] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-08:18:18:59] Runtime Installer end with exit code 0
[2013-01-08:18:18:59] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
[2013-01-08:18:19:16] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
[2013-01-08:18:19:16] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:19:16] Commandline is: -eula
[2013-01-08:18:19:16] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:19:17] Starting eula display
[2013-01-08:18:19:40] Finished eula display
[2013-01-08:18:19:40] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-08:18:19:40] Runtime Installer end with exit code 0
[2013-01-08:18:19:40] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
[2013-01-08:18:43:16] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:43:16] Commandline is: -arp:uninstall
[2013-01-08:18:43:16] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:43:18] Relaunching with elevation
[2013-01-08:18:43:18] Launching subprocess with commandline c:\program files\common files\adobe air\versions\1.0\resources\adobe air updater.exe -eu
[2013-01-08:18:43:18] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:43:18] Commandline is: -stdio \\.\pipe\AIR_4184_0 -eu
[2013-01-08:18:43:18] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:43:18] Starting runtime uninstall. Uninstalling runtime version 3.2.0.2070
[2013-01-08:18:43:19] Uninstalling product with GUID {47FA2C44-D148-4DBC-AF60-B91934AA4842}
[2013-01-08:18:43:22] Runtime Installer end with exit code 0
[2013-01-08:18:43:22] Elevated install completed
[2013-01-08:18:43:22] Runtime Installer end with exit code 0
[2013-01-08:18:51:57] performing a silent runtime install
[2013-01-08:18:51:58] UI SWF load is complete
[2013-01-08:18:51:58] starting install
[2013-01-08:18:51:58] Scheduling runtime installation operations
[2013-01-08:18:51:58] Scheduling an MSI install operation
[2013-01-08:18:51:58] Beginning runtime installation
[2013-01-08:18:51:58] Beginning install
[2013-01-08:18:51:58] Installing c:\users\pablo\appdata\local\temp\air147c.tmp\setup.msi
[2013-01-08:18:52:01] Copying C:\Users\Pablo\AppData\Local\Temp\AIR147C.tmp\Adobe AIR\Versions\1.0\Resources\airappinstaller.exe to C:\Users\Default\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com\bin\airappinstaller\airappinstaller.exe
[2013-01-08:18:52:01] Copying C:\Users\Pablo\AppData\Local\Temp\AIR147C.tmp\Adobe AIR\Versions\1.0\Resources\digest.s to C:\Users\Default\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com\bin\airappinstaller\digest.s
[2013-01-08:18:52:01] Execution complete; beginning commit phase
[2013-01-08:18:52:01] Commit complete
[2013-01-08:18:52:01] install complete
[2013-01-08:18:52:01] begin quitting
[2013-01-08:18:56:39] UI SWF load is complete
[2013-01-08:18:56:40] UI initialized
[2013-01-08:18:56:44] Pingback request completed with HTTP status 200
[2013-01-08:18:56:44] Begin background update check
[2013-01-08:18:56:44] Starting download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.0.3.13070/update
[2013-01-08:18:56:45] Background update successfully downloaded
[2013-01-08:18:56:46] User notified of available background update
[2013-01-08:18:56:46] runtime install entering error state: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: can't access property in unloaded application" errorID=0]
[2013-01-08:18:57:06] begin quitting
[2013-01-08:18:57:36] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:18:57:36] Commandline is: -silent
[2013-01-08:18:57:36] Installed runtime (2.0.3.13070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:18:57:36] Starting silent runtime update. Updating runtime from version 2.0.3.13070 to version 3.2.0.2070
[2013-01-08:18:57:37] Installing msi at c:\users\pablo\appdata\local\temp\air400e.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
[2013-01-08:18:57:42] Runtime Installer end with exit code 1
[2013-01-08:19:07:11] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
[2013-01-08:19:07:12] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:19:07:12] Commandline is: -eula
[2013-01-08:19:07:12] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:19:07:14] Starting eula display
[2013-01-08:19:07:49] Finished eula display
[2013-01-08:19:07:49] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-08:19:07:49] Runtime Installer end with exit code 0
[2013-01-08:19:07:49] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
[2013-01-08:19:08:20] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
[2013-01-08:19:08:20] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:19:08:20] Commandline is: -eula
[2013-01-08:19:08:20] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:19:08:21] Starting eula display
[2013-01-08:19:08:50] Finished eula display
[2013-01-08:19:08:50] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-08:19:08:50] Runtime Installer end with exit code 0
[2013-01-08:19:08:50] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
[2013-01-08:19:09:05] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
[2013-01-08:19:09:05] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-08:19:09:05] Commandline is: -eula
[2013-01-08:19:09:05] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-08:19:09:06] Starting eula display
[2013-01-08:19:09:31] Finished eula display
[2013-01-08:19:09:31] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-08:19:09:31] Runtime Installer end with exit code 0
[2013-01-08:19:09:31] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
[2013-01-09:00:25:22] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
[2013-01-09:00:25:22] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2013-01-09:00:25:22] Commandline is: -eula
[2013-01-09:00:25:22] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
[2013-01-09:00:25:23] Starting eula display
[2013-01-09:00:25:27] Finished eula display
[2013-01-09:00:25:27] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
[2013-01-09:00:25:27] Runtime Installer end with exit code 0
[2013-01-09:00:25:27] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)

I can't update or uninstall itunes

i can't update or uninstall itunes. I get error message:the path c:\documents and settings\network service\loval settings\application\data\apple\apple software update\itunes.msi cannot be found. verify that you have acess to this location and try again, or try to find the installation package itunes.msi in a folder from which you can install the product itunes... how do i fix this??

I read the responses about downloading the windows installer cleanup utility, but that is no longer available on microsoft's website.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Restart the PC, and try another iTunes install. Does it go through properly this time?

Can't update or uninstall, missing iTunes.msi file

I was trying to use homesharing, got iTunes messed up so that it wouldn't update. Now I can't update or uninstall...Get the message: "the feature you are trying to use is on a network resource that is unaccessable." Problem seems to be that the iTunes.msi file is not accessable?

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I can't update to iOS5

I keep getting message saying that iTunes can't update to iOS5 because applesoftwareupdate.msi cannot be found. I've tried extracting the files from iTunes setup using winRAR, but I'm still getting an error because the old applesoftwareupdate.msi cannot be uninstalled. I've even Tried using add/remove programs to remove it from my computer and then use the extracted file but it still can't be located. Previous threads have said to use Windows Startup Utility or something , but that is not available anymore. I am really frustrated and have had to use a different computer to connect my iPad to. My iPod is on the computer that won't update so my apps are not going to be able to be transferred to my iPad. HELP PLEASE!!

As for the file extracting, I meant to say that when I try to download the extracted applesoftwareupdate, it cannot be downloaded because the previous applesoftwareupdate cannot be located and uninstalled.

Can't update itunes. I get " The feature you are trying to use is on a CD-ROM or other removable disk that is not available

Can't update itunes. I get " The feature you are trying to use is on a CD-ROM or other removable disk that is not available"

I am getting this same message when it tries to install it is Itunes.msi
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Can I update startup.exe on an FP-2000 w/o Labview?

Similar Messages

Maybe you are looking for