Can I use my Officejet pro 8000 WITHOUT the duplexer

Does anyone know if there is a way to remove the duplexer unit from the back of my Officejet pro 8000 and still print (only single sided obviously)?
If I remove the duplexer, then paper spits out the back. I would like to use the printer on a 11" deep shelf. Duplexer removed would allow that...
Thanks,
Andrew

Same question here from Denmark! The prior models had a kind of latch that could be put into the whole where the duplexer goes, but there was not such a thing with in the printer box.

Similar Messages

Officejet pro 8000 and the power and resume lights keep flashing

I have an officejet pro 8000 and the power and resume lights keep flashing. I initially had the problem when I put a new black ink cartridge in. Lately there was an error message on the computer saying pump stall error, which then culminated in a print head error. I have replaced the print head at an extra £40 I have replaced all the ink cartridges which say they are low even though I haven't been printing. Basically spent the cost of the printer again AND I STILL CANT PRINT! I'm using a Mac with snow leopard and I have reset the printer list and installed the new software and drivers. I have tried connecting with USB and Ethernet. I have filled up the paper. I have taken out the duplex and given it all a blow through. reset the print heads - basically everything the support web pages told me to do.
I have to say this is the worse printer I have ever had from HP. I always buy HP because of the quality. I have to say I feel unless this problem is solved with out me spending more money on it I will have to buy something else - and not HP ever! oh and the warranty is out by less than 2 months!

Welcome back burtf,
I am sorry to hear about the issue you are having with your Officejet 8500 showing a message for you to turn the printer off and on. I would recommend following the guide below for this issue.
I hope it helps!
'Turn Power Off then On' Message Displays on the Control Panel
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Happy Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Can I use "Adobe X Pro" to debug the java code in adobe forms?

HI,
Can I use "Adobe X Pro" to debug the java code in adobe forms?, if not how do i debug the java code written in the adobe form.

I have the adobe acrobat x evaluation version installed, please find the print shot attached, I have pressed CTRL+J in the preview mode, but nothing came up.
Am I doing something wrong..

Installation of HP Officejet Pro 8000 without internet?

Is it possible to bypass the internet during the installation of HP Officejet Pro 8000? I do not have internet access to the computer I am installing it on.

click start clik run/start search
--type in services.msc
-fine the service hp netdevice manager, the start or restart the service
-and also restart all the service regarding HP
Although I am an HP employee, I am speaking for myself and not for HP.

Can i force a officejet pro 8000 a809 to print black and white when a color cartrigde is empty?

I am trying to get two text document printed and I get an No ink/toner message on the top the printer que window. It is the Yellow ink cartridge, can I bypass this and force it to print in black and white only?

I know these posts are old, but.
To force the print to print even though some carts are empty or expired. Turn the printer off. Then hold the feed button while turning the printer on. Keep the feed button pressed for about 4-5 seconds after powering on the printer.

Can I use my I-Trigue 3400 without the wireless remote??????

The remote is done. Is there anyway to do it's Or do I have to buy a new one?

Same question here from Denmark! The prior models had a kind of latch that could be put into the whole where the duplexer goes, but there was not such a thing with in the printer box.

HP Officejet Pro 8000 A809a - network connection does not work

Hi,
I just purchased the Officejet Pro 8000 (without wireless). Printer works great when connected and installed via USB, but network connection is just ... awkward. Meaning it doesn't want to work
Question: when I connect the printer via ethernet, the printer should automatically obtain an IP-adress from my router's DHCP-server, right?
Well that doesn't happen here. I printed the network configuration page several times, each time it states that the printer has the IP 169.254.90.4 with 255.255.0.0 as subnet. My local network is 192.168.2.0 with 255.255.255.0 as subnet. So the connection to the printer cannot work. Why doesn't the printer automatically obtain the network config of my network and how can I change this behavior?
Any help would be very appreciated.

Sometimes DSL providers have more control over the router than the printer likes.
- Unplug the telephone line and printer's Ethernet from the router.
- Turn the power off on the router, wait 30 seconds, then turn the power back on.
- Connect Ethernet between the printer and router.
- Now find the IP address of the printer (it should be on the self-test printout), type it into a browser.
- In screen you will find a Networking Tab, then on the left Wireless, then the IPv4 Tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 255 (the last number in the address).
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Use the router's IP address for the gateway and the first DNS (leave the second blank).
- Finally, plug in the phone line and test.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet Pro 8000 warm up time?

I am interested in the HP Officejet Pro 8000 wireless. However, many reviews for this printer mentions the long warm up time everytime they turn on their printer. I contacted HP chat tech support and chat sales support many times and they kept saying that there is no warm up time and that I can print immediately without delay.
Currently I have an HP Deskjet 920c from early 2000 and it works great. I turn it on, click print and it prints immediately with no warm up time or delay. However, I am looking for a printer that prints much faster and the Officejet Pro 8000 seems like what I need. However, if there is a warm up time, then that just defeats the purpose of saving time.
Anyone with this printer know if there is a warm up time when the printer is turned on?

I just bought the Officejet pro 8000 (not the wireless one, but USB connected) to replace my 5550c deskjet that died. I do switch it off with all other hardware at night, because the power plugs are all on the same surge protector power strip, which has an on/off switch. When powering up again, it takes more or less the same time as my PC takes to fully boot up to a useable desktop (~2 minutes). So it's not a problem for me.
The official advice is not to switch it off as in sleep mode it uses very little power. First page print from sleep mode (which it returns to if you don't use it for a while) takes about 10 to 20 seconds. After that it is very fast. I have found it to be a very good printer.

Duplex printing with officejet pro 8000

I am using this officejet pro 8000 to print up some newsletters. When printing a two sided copy (duplex printing) something happens which changes my border setting. Printing the exact same document, but electing one-sided copy renders a perfect border. I would not have a problem copying just one side, then re-loading those in order to make two-sided copies, but the friction caused by the ink on the pages causes mulitple sheets to feed at the same time, jamming the printer. Has HP ever come up with a fix for this? I have seen this problem on the net, but the best folks have done (that I have seen) is to upload drivers for older machines. This has rendered good borders on duplex prints, but diminishes the quality of the print copy. Whatcha think?

Terrible Tom wrote:
Since updating to Snow Leopard, I have had serious problems duplexing. Under the print dialogue window, there is no option to duplex. H.P. blames Mac. Mac blames H.P. I can duplex by going to "layout" and where it says "duplexing off" selecting "long-edge binding" will work. How dumb. Mac Help senior customized my settings by adding "duplex printing" to the "Presets" list.
Are you using the latest drivers from HP? If I set up a printer with the HP Officejet Pro 8000 A809 Series PPD, I can see Two-Sided to the right of Collated if the HP Two-sided Printing Accessory (Duplexer) is checked in the Print & Fax -> Options & Supplies -> Driver tab. If this is not checked, Two-Sided won't appear.
MAC HAS TO CREATE A PATCH TO SIMPLIFY THIS SNOW LEOPARD ERROR!
Apple doesn't write the HP software.
Hope this helps.

Officejet Pro 8000 paper feed (top or bottom)?

I've gotten conflicting answers from HP sales chat.
Does the HP Officejet Pro 8000 feed the paper from the bottom of the stack of paper or does it feed from the top?
This question was solved.
View Solution.

From the top. Tested by printing a page, putting it back (printed side up) on the top of the stack, then printing the same page again. It duly appeared on the other side of the same sheet.

Tutorial: Print index cards without removing paper from tray for Officejet Pro 8000.

The HP Officejet Pro 8000 and Officejet Pro 8000 wireless do not have a slot for inserting index cards and envelopes.
If you are wanting to print index cards without removing the paper from the tray, follow these steps.
The steps below are for 3 x 5 index cards.
1.) Open Microsoft Word
2.) Go to the Insert tab and insert a rectangle shape
3.) Draw a rectangle of any size
4.) Right click on the rectangle and select "Format Autoshape..."
5.) Under the Size tab, enter 5" for the height and 3" for the width (make sure "Absolute" is selected)
6.) Under the Layout tab, select "Center" for the horizontal alignment
7.) Click OK
8.) Use the keyboard up arrow key to move the rectangle to the top of the page. Make sure the top edge of the rectangle touches the top edge of the document.
9.) Print this document on plain 8.5" x 11" paper
10.) When you want to print an index card, place this 8.5x11 document in the paper tray printed side face up. Then place an index card over the rectangle and align with the border of the rectangle. After you print the index card, remove the 8.5x11 paper for the next time you need to print an index card.
Note 1: This are USA instructions. If you live in the UK or other countries you may have different paper size standards.

I can't tell you how much I HATE this printer. I will never buy an HP product again. BROTHERS printers are simply and easy to use.

HP Officejet Pro 8000 Wireless, Mac OS 10.7.2 can't get it set up to run wireless

I have an iMac, OS 10.7.2, Airport Extreme router, and an HP Officejet Pro 8000 Wireless. I recently replaced my router with an Airport Extreme. My printer setup CD is for OS 10.4 or 10.5. I'm trying to setup the 8000 wirelessly but without much luck. As I understand it, the HP 8000 setup is now included in OS 10.7. I followed some of the items from another post on this topic with OS 10.6. Somehow I can't seem to get to the place were the printer install asks me to choose a network. I have updated all of the software, setup a printer connected with a USB cable.
This question was solved.
View Solution.

I figured this out (with some help from the Print Doc on "Is there driver for Deskjet 3050 for Mac OSX 10.7). Once I stopped thinking like the Mac OS 10.6 approach with an hp utility things were easy.
- delete any previously set up printers
- scrub the old hp software
- remove the usb cable from the printer if you have one connected
- reset the printer network to hpsetup (press power button, network button 2x, cancel 3x, release power)
- print out the wireless network test report (press network button and update button 2x). verify ssid is hsetup
- change the mac wireless network to hpsetup
- go to the sys pref > print scan
- add the 8000 printer
- click on the options and supplies and go to the printer webpage
- use the network wizard and change the network from hpsetup to your network
- finish
- go back to the sys prefs and change the network to your network
- go to the printer and print out the wireless network test report (press network button and update button 2x). Check that the SSID is your network
- try printing something to your printer. It might take a little time the first print.

HT4356 My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

You can use 3rd party software such as Print n Share if you have a PC or Printopia if you have a Mac.
Or you can check HPs site and see what they have available.

HP officejet Pro 8000 Can't print when color cart is empty enven when printing in grey scale

I do not use color in my printing. Nonetheless when the printer says my color cartdridge is empty I can not print. I spent a $100 on color cartdridge and never used them. They now show empy and I can't print. Is there a work around or should I just junk this printer. Thanks for your help.
Bob

Hello Bobmcclammy,
I can understand the frustration when the printer, in your case the Officejet Pro 8000, stops and tells you to change inks you are not even using. I too have fought with this in the past. Unfortunately, there is no "work around" for such an issue, at least that I have been able to find.
Even when printing black text only, for example, a resume, the printer will be using a subtle amount of color as a base. Printhead maintenance also will chip away at the ink, this is to ensure the ink is not drying up within the print system. This information will explain more: Ink Usage in Inkjet Printers.
What I have done in order to get the most out of the printer ink is, set the printer in a black only grey scale mode. This needs to be set in the printing preferences in the print driver installed on the computer.
The inks will still need to be replaced, but it should help for the future.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Printing #10 envelopes using Microsoft Works on Officejet Pro 8000?

I am having trouble printing #10 size envelopes using Microsoft Works 8 on my Officejet Pro 8000. Somehow my settings got messed up causing wrong areas of the envelope to be printed and I need help to reset them. Thanks in advance to anyone who can help me with this.

I can't tell you how much I HATE this printer. I will never buy an HP product again. BROTHERS printers are simply and easy to use.

Can I use my Officejet pro 8000 WITHOUT the duplexer

Similar Messages

Maybe you are looking for