Can I use thermocouple type L with NI4351

Can I use thermocouple type L with high resolution temperature and voltage loggers NI4351
if yes, then where I can find accuracy data

Hello,
I could not find the milliVolt input ranges for that specific type of thermocouple. What I did find was that it has a temperature range between -200 and 900 deg C. Since the temperature ranges seem similar to other types of thermocouples, you can compare these to the ones mentioned in Appendix A of the NI-4351 User's Manual (www.ni.com/manuals, and make a search for "4351") in order to get an idea of the accuracy that you can expect.
Regarding the software, there's two options:
1. To use NI-DAQ: with this, you can create a Temperature Custom Scale and use it with a Virtual Channel so that the Voltage readings will be translated into Temperature readings.
2. You can use the NI-4351 own drivers for reading the voltages, and then you can
add software tables to your program so that those voltages will be translated into temperature values.
Good luck with your application!

Similar Messages

Can't use Data type created with External Definition

Hi,
In the repository, I would like to transport a very complexe DataType from one XI system to an other one. As I don't want to spend a week to create data types, I created a new External Definitions and loaded my XSD schema (that I exported as XSD from Source system) with Messages parameter set to "From All Available Global Elements". I don't set the "Source". I can see the "Imported Document" and "WSDL", but the Messages and External References tabs are empty. Furthermore, I can't use my new message type in a Outbound Asyncrhronous Message Interface.
Here is a very small XSD file that I use to test my scenario.
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://veilleux.1" targetNamespace="http://veilleux.1">
     <xsd:complexType name="SimpleType1">
          <xsd:annotation>
               <xsd:appinfo source="http://sap.com/xi/TextID">
               bdfdbef1df9711daa2c9001125f86068
               </xsd:appinfo>
          </xsd:annotation>
          <xsd:sequence>
               <xsd:element name="Name" type="SimpleType2">
                    <xsd:annotation>
                         <xsd:appinfo source="http://sap.com/xi/TextID">
                         bdfdbef0df9711daa821001125f86068
                         </xsd:appinfo>
                    </xsd:annotation>
               </xsd:element>
          </xsd:sequence>
     </xsd:complexType>
     <xsd:complexType name="SimpleType2">
          <xsd:annotation>
               <xsd:appinfo source="http://sap.com/xi/TextID">
               0fecc852df9811da899a000f206d294f
               </xsd:appinfo>
          </xsd:annotation>
          <xsd:sequence>
               <xsd:element name="Name" type="xsd:string">
                    <xsd:annotation>
                         <xsd:appinfo source="http://sap.com/xi/TextID">
                         ac58afc0df9711da86af001125f86068
                         </xsd:appinfo>
                    </xsd:annotation>
               </xsd:element>
          </xsd:sequence>
     </xsd:complexType>
</xsd:schema>
Any one can help me please.
Thanks, Davy

Hello Moorthy,
My XSD is correct since it's XI itself that generated it from real Data Type on my source System (but I tested it in Internet Explorer and it looks fine).
I tried to select my ExternalDefinition as source in MessageMapping, but XI doesn't let me specify it (Apply button is disabled when I select my ExternalDefinition).
I'm pretty sure that it is related to the fact that I should have a Data Type in "Messages" and "External References" tabs and I have nothing. My XSD is legal, but it seems that XI can't automatically create the data type from it.
Do you have any other idea?
Thanks, Davy

How can I use my time capsule with windows7

How can I use my time capsule with windows7?

This is asked regularly.
https://discussions.apple.com/message/10978060#10978060
Look at the more like this. On the right column next to the post.
Load airport utility for windows.. which will also load bonjour for windows.
In windows explorer type \\TCname or \\TCipaddress (replacing with the actual values.. names with spaces will give you trouble so change all names in the TC to SMB compatible or actual ip address).

When can I use Inspection Type 05

When can I use Inspection Type 05 - Inspection for Other Goods Receipt. Please suggest me which scenario I can use 05.
Thanks

Hi
05 is not directly assigned to any movement type.It is like 08 inspection type.
best thing is that 05 is stock relevent inspection type.
Just to share with you :
1.When you want to revert the material stock posting done through UD screen like 553(scrape)
reversal of stock posting -554- can be done through activating 05 inspection type.
2.when using a project systems Inspection lot of 05 generate after 101 mvt type.
3.during sales & sales return if you assign the 05 inspection type for tha material & for
655 GD returns QI -->you can activate 05 ........this creates lot of 05.
etc
mostly its use for Inspection where you want stock posting to be done.
Regards
Sujit

Can I use excel type functions embedded into an online pdf form, ie Qty x Price= total $

Can I use excel type functions embedded into an online pdf form, ie Qty x Price= total $

Let me tell you what I am sure about and what I am not sure about:
I am sure that I want to be able to sell my products online. The industrial market that I sell to usually do not allow the maintenance people that find me on the web, do not have the ability to use credit cards in a typical shopping cart format due to the higher prices that the equipment I sell costs and that most people call me up to 'request a formal quotation' to give to their purchasing depart. So, my bright idea is to create numerous pdf files with very specific url's to match the very specific items that I sell. (1) item per pdf. I am thinking that the advantage to skipping the shopping cart approach and allowing the customer to fill in the qty of items, which would be mulitpled by the price of the item (a constant #) and then hitting a apply button, that would calculate subtotal price. Discounts for the qty the customer inputs (qty of items inputted by customer would be discounted on a percentage x base price) and a refresh the screen. It would allow for SEO advantages from what I have seen in the past in my very vertical market. All forms would be setup using the same functionality, just images, alt text, urls, and readable text would change.
What I don't know- which is alot, then how to calculate shipping costs. I have a weight per item, which can be added up. I saw an Adobe blog that allows UPS shipping cost to be programmed in. I don't know how dreamweaver works, which was what the blog mentioned would allow for this updated, instantanious interface with UPS and calculating real shipping costs to a specific zip code. Shipping cost would be fluff to this page. The main thing would be to do allow the customer to be able to fill in a qty of the specific item on the page, calculate a discount if / then type thing, be able to have customer email to purchasing dept or print. I would date stamp it with verbage that pricing is valid for XX days and if I could get a copy emailed to me that would be icing on the cake. I believe that this non static pdf would be something different then the current competion and that it would allow for 100's of quotes to be generated without customers having to wait 15 minutes to an hour for me to process the exact document that they are looking for.
Hajeks

Can we use dbms_output.put_line package with forall statement

Hello Everybody
Can we use dbms_output.put_line package with forall or can we use insert,update and delete only
declare
type emp_rec is table of emp%rowtype
index by binary_integer;
t emp_rec;
begin
select * bulk collect into t from emp;
forall i in t.first..t.last
dbms_output.put_line(t(i).name);
end;Thanks & Regards
peeyush
Edited by: Peeyush on Nov 25, 2010 11:45 PM

MichaelS wrote:
Well as the docs explain (though not very clear and detailed, I admit) you can use a dynamic sql statement (execute immediate) with FORALL.You got me interested in the performance side doing this Michael - running PL/SQL code via a FORALL loop.
It is faster than using a normal FOR loop to execute dynamic PL/SQL - a bit surprising as I expected another context switch to be in there. But seems like the PL/SQL engine is a more clever at optimisation than what I originally credited it with.. ;-)
Of course - pre-compiled/static PL/SQL code in a FOR loop is the fastest, as expected.
SQL> declare
2          type TNumbers is table of number;
3
4          type TTimes is record(
5                  for_all number,
6                  for_dynamic number,
7                  for_static number
8          );
9
10          type TTimesTable is table of TTimes;
11
12          MAX_ITERATIONS constant number := 10;
13
14          plBlock         varchar2(1000) :=
15          'declare i number;
16          begin i:= :var / 10; end;';
17
18          performance     TTimesTable;
19          t1              number;
20          bindVar         TNumbers;
21          n               number;
22 begin
23          select
24                  level bulk collect into bindVar
25          from    dual
26          connect by level <= 10000;
27
28          dbms_output.put_line( 'Iterations: '||bindVar.Count||' for loop cycle(s)' );
29
30          performance := new TTimesTable();
31          performance.Extend( MAX_ITERATIONS );
32
33          for j in 1..MAX_ITERATIONS
34          loop
35                  t1 := dbms_utility.get_time;
36                  forall i in 1..bindVar.Count
37                          execute immediate plBlock using bindVar(i);
38                  performance(j).for_all := dbms_utility.get_time-t1;
39
40                  t1 := dbms_utility.get_time;
41                  for i in 1..bindVar.Count
42                  loop
43                          execute immediate plBlock using bindVar(i);
44                  end loop;
45                  performance(j).for_dynamic := dbms_utility.get_time-t1;
46
47                  t1 := dbms_utility.get_time;
48                  for i in 1..bindVar.Count
49                  loop
50                          n := bindVar(i) / 10;
51                  end loop;
52                  performance(j).for_static := dbms_utility.get_time-t1;
53          end loop;
54
55          dbms_output.put_line( 'Times in 100th of a second' );
56          dbms_output.put_line( rpad('for all',15) || rpad('for dynamic',15) || rpad('for static',15) );
57          for i in 1..performance.Count
58          loop
59                  dbms_output.put_line(
60                          rpad( performance(i).for_all, 15 )||' '||
61                          rpad( performance(i).for_dynamic, 15 )||' '||
62                          rpad( performance(i).for_static, 15)
63                  );
64          end loop;
65
66 end;
67 /
Iterations: 10000 for loop cycle(s)
Times in 100th of a second
for all        for dynamic    for static
10              72              0
6               37              0
6               37              0
6               37              0
6               36              0
6               37              1
5               37              0
5               37              0
6               37              1
5               37              0
PL/SQL procedure successfully completed.
SQL>

Can I use voice recognition software with Pages?

Can I use voice recognition software with Pages?

Apple provides Dictation services as part of OS X that must be enabled in System Preferences, and then activated while in the Pages document. Then you can speak and it will type what it thinks you said. It is learning software, and over time, better recognizes your voice pattern.
Then there is Dragon Naturally Speaking for nearly $200 USD.

How can I use my Apple ID with 2 Apple devices?

I just got an ipad mini and I registered it with the same Apple ID I use for my iphone 4s. Everything was fine until I downloaded apps to the ipad and noticed that the ones I had on both devices no longer opened on my iphone. Why is this? How can I use my Apple ID with 2 Apple devices and how can I recover my apps on my iphone?

I've had an iPad for almost two years. When I purchased an iPhone last fall I set it up to use the same Apple ID as my iPhone. I've had no problems doing this. Try resetting each device and see what happens.
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

How can i use my apple ID with the itune store over my windows laptop

how can i use my apple ID with the itune store over my windows laptop

If you don't have iTunes installed on your laptop then you can download and install it from here : http://www.apple.com/itunes/download/
You can then log into your account on it via the Store > Sign In menu option (on iTunes 11 on a PC you can get the menus to show via control-B) :
And you can then select the Store on the left-hand sidebar (you can enable the sidebar via control-S), and then browse items in the store and buy them by clickin on their price.

Can I use an USB disc with my macbook pro bought in 2005. What capacity will it take 2.00 or 3.00?

can I use an USB disc with my macbook pro bought in 2005. What capacity will it take 2.00 or 3.00?

The first MacBook Pro's were not released until the beginning of 2006, and they had USB 2 ports.
Anything available new in 2005 would have been a PowerBook G4 and they also had USB 2 ports.
A USB 3 disk will just transfer data slower then it could do, if you plug it into a USB 2 port though, so you can buy either.

I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

do I need to create another account with a different email account
Yes, the email addresses need to be unique to each device. You may use the same Apple ID on each device, but the email address used by each device needs to be different.

New to Apple products (finally) - can I use my Itunes account with multiple products e.g. Iphone and Ipad?

New to Apple products (finally) - can I use my Itunes account with multiple products e.g. Iphone and Ipad?

Oh yes! Apple will be happy for you to buy as many Apple products as you can afford.
As and when needed, each can be given its own selections of content to sync with.
tt2

Can i use two apple tvs with one itunes account?

can i use two apple tvs with one itunes account?

yes and you can use more then 2
just don't give them the same name

Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?

Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
I have 2 and cannot seem to get them to work?

Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
I have 2 and cannot seem to get them to work?

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

Can I use thermocouple type L with NI4351

Similar Messages

Maybe you are looking for