Can Multiple Objects be copied into Sales Order??????

Hi,
I have created three charecteristics and assigned to a class of class type 001. In the classification view of material master for each material i assigned the class.This assignment is done for calling the object at sales order level.
I am able to find the multiple objects for single characteristics in sales order but multiple objects are not copied into sales order..only single object is copied into sales order...when i try to copy multiple objects system is throwing warning message as "You can only copy one object in this mode".... Is it possible to copy multiple objects ?? Any answers will be highly appreciated.
Ramagiri.

Hi,
But what's the purpose behind that.Material Class 001 is just only for information purpose only to search the materials with help of class and characterstic.
If your material is configuable one then you have to use Class type 200 - Material (Configurable Objects) and for the same you have maintain the characterstic value during sales order creation.
Regards,
Dhaval

Similar Messages

CS Long Text Copy into Sales Order Long Text

Hello ,
In Depot Repair scenario , I am entering few details in Service Order long text . I want this text to be copied into Sales/Repair Order long text . Do anyone know how to do this.
Regards.

Hi,
I am not sure but check in user exit IWO10009 PM Order: Customer Check for 'Save' Event
with FMs READ_TEXT & SAVE_TEXT, WRITE_TEXT ..
or in some sutiable user exit at the time of saving sales order , the above FMs will be helpful for ur case
regards
pushpa

Wrorng pricing procedure copied into sales order

HI
Scenario: I am creating sales order with reference to quotaion , but then wrong pricing procedure is being copied. I have check the pricing procedure determination everytihng is fine.
Brief: In quotation I have trading as well as manufacturing material with diff plants.could this be the reason please guide.

Hi,
As for i perceive your problem the moment you run a sales order the approprirate pricing procedure is taken under consideration. But this pricing procedure is not your requirement.
1. Check within the sales Document details screen the "document pricing procedure" (Ex.A) that you have mentioned is reflecting in your "pricing procedure determination" table.
2. Check in your Custmer master record --> under sales area tab --> sales whether you have chosen appropriate pricing procedure, check again if it is available in your "pricing procedure determination" table.
3. Most important check whether you have assigned the correct pricing procedure that you have created against this Document pric. proc and cust pric. proc.
4. IMG --> SD --> BF --> Pricing --> Pricing Control --> Define and Assign pricing procedures --> Check Settings for pricing procedure
Here you enter your pricing procedure and execute you will be informed if any customisation error if it exists.
Regards
Sathya

Item text not getting copied into sales order from inbound Idoc

Hi All,
I have a scenario where in we get the sales order created through a inbound 850 idoc .
The trading partner sends the sales order information which gets through GENTRAN and gets posted as inbound idoc in SAP .
The problem here is that ,there are segments with values for item text in the idoc ,but the item text is not getting carried over to the sales order which is getting created because of this idoc.
There is no problem with the header text and it is present both at the idoc as well as the sales order level.
I have checked the configuration for text determination and everything looks fine .
Please let me know has anyone come across a scenario like this .This is important as our EDI is getting failed when an outbound 810 is sent from SAP for the simple reason that there is no item text .
Thanks
Sridhar

Hello Sridhar
Do you have access to the genuine 850 EDI message? Does it contain the item texts? If so then there is probably a problem with the (XSLT) mapping EDI 850 -> ORDERS.ORDERS05 IDoc.
Are you able to test the mapping independent of the EDI transmission? This way you could nail down the problem.
Regards
Uwe

Copy from VBRP to technical object Serial Number in Sales Order

Hi SAP colleagues,
I need some help in the following issue. Hopefully somebody can assist. In a F2 invoice in the field VBRP-CHARG, the serial number of the product is available. In the business of my client, many return orders exist (KR, RE, etc.). The return order is created while referencing to the billing document. At this moment SAP users (transaction VA01) must fill in the serial number manually via Extra -> Technical Objects. Regularly people forget to do this or use an incorrect serial number. This leads to all kind of problems further on in the process.
The question is: how can this process be automatized? So the serial number which is available in VBRP-CHARG, should be copied automatically into the return order in the technical object area in the field SERNR.
Who knows how to solve this technically in SAP?
Best regards,
Paul

Hi Karan,
First of all thanks a lot for your answer. Unfortunately it is more complex... The batch number which is available in VBRP-CHARG should be copied into the Technical Object area in the sales order. Menu path: Extra -> Technical Objects. So this is equipment functionality related to sales orders. So copying using copy control from VBRP to VBAP or VBAK will not solve the problem. Do you have any idee how this can be achieved (tables like SER02, OBJK are relevant)?
Best regards,
Paul

Can Export License text be copied into sales documents??

I have set up legal control in Foreign Trade data to check for export licenses. Within the license we are using there are several types of text. I would like to get at least 1 of them to copy into the delivery note and invoice so I can have them print on the documentation.
When creating this in text determination I can create the text but when I do not see any standard application object when I attemp to set up the access sequence which controls where the text is copied from.
Has anyone else been successful at setting this up so that export license text can be copied into the sales documents? If so how did you get it to copy from the license?? If I can't copy it into the documents on line can I change my print program or script to go get the text and then print it??
Many thanks for all the help I get from my SAP forum friends!!! Debbie

Thanks once again, Siarhei!! You are absolutely right!! The text exists in the TTXOB, STXH and STXL tables. And I'm sure you are right that we can get that data to pull into the scripting and print.
But do you by chance know why the text object EMBK does not exist in Text determination table (RVTXOBJ)? If it did exist I could create an access sequence to go and get the data. I would really prefer to set it up that way if possible so we can see the text in the sales order and then copy it into the delivery note and invoice. If not, then of course I will use the scripting to get it printed.
You have been so helpful!!
Thanks very, very much!!
Debbie

Can't change quantity when copy from Sale order for Delivery

Hi all!
Can i use authorization for can't change quantity when copy from Sale order for Delivery.

Tien,
Approval will not work when you have mutiple rows of data. You would have to work with SP Transaction Notification
There has been threads before on the forum on the same topics.
Block the Quantity in Sales Delivery
Approval Procedure for chaning quantity in Delivery Document
Suda

Z-Table Values, can it be pulled into Sales Order?

Dear Gurus,
If i maintain values for different disocunts in Z-Tables, can it be possible to pull those values into sales order?
If so, please show me the way forward...
SKumar

Hii
For using Z-Table value for discount calculation against particular condition type, you have to create one Routine in Transaction Code VOFM => Go to formula from menue bar ==> Condition Base Value
Create on routine there with the logic that base value of condition calculation will be Z- table (You can create your own logic)
Then use that routine against your condition type in Pricing procedure in Alt Cal Type column
Hope it will help you
Thanks and Regards
Shambhu Sarkar
Edited by: SHAMBHU SARKAR on Apr 25, 2011 12:04 PM

PO Text copy from Sales Order to Purchase Order

Dear friends,
Hope everyone is doing fine.
I have the following business requirement for two situations
Scenario 1) Purchase Order text from the Sales order has to be copied to the purchase order. Here sales order is converted to purchase requisition, and later the requisition is converted to the purchase Order.
The standard SAP config is working absolutely fine for this.
Scenario 2) Purchase Order text from the Sales Order has to be copied ot the purchase order. Here sales order is converted into a planned order, planned order is converted into purchase requisition, and later the requisition is converted to the purchase Order. For this situation, the text is not getting copied from Sales order to the requisition/purchase order.
This is not working as of now with the configuration for the above scenario 1.
Please throw some light to solve the scenario 2.
Please let me know if there is a config or do we need to use any user exit or BADI to achieve this.
Thanks in advance.
Regards

Hi Sam Matt ;
You can benefit from MM:Define copy rules for PR texts .
I checked , you can copy from sales order , like a belowed screens.
Regards.
M.Ozgur Unal

Text messages not copied from sales order to billing

Text messages which have been given in sales order are not copied to billing. Two of the text are copied and the other two are not getting copied. Checked the access sequence.. everything is correct.
Please give a clue.

Dear DV,
These are basic settings to copy the Text from sales order to Invoice so please check in these areas,
First you need to copy the sales order text to the delivery document from the delivery document you can copy the text to the billing document.
To copy the sales order text to the delivery document
You do the text determination for the deliveries also,define and maintain same TextId in the delivery header text procedure ,maintain the access sequence ,in the delivery text procedure access sequence you put the Text Object as VBBK for that Text ID.
Make sure that you have assigned access sequence for your missed Text ID's in VOTXN transaction
To copy the delivery text to the invoice.
You do the text determination for the billing document,define and maintain same TextId in the billing document text procedure and maintain the access sequence,after that
Go to VOFA transaction then selct billing document type then go in to the details screen here you do the check in the Delivery Text check Box (Top most bottom of the screen.)
Now you can able to copy the sales order text to the invoice.
Use VOTXN transaction for Text determinetion
I hope this will help you,
Regards,
Murali.

ECP Planned values into Sales order

Hi,
I have a scenario where client maiantians the planned costs with ECP for around 50 wbs elements. Client would like to bill the customer based on the planned costs of wbs elements.
He would like to see all the wbs elements as individula line items in the sales order and then he will add some mark up and then bill the customer.
Is there any process where i can transfer the planned cost of each wbs element into sales order as line items?
Please suggest.
Rams

Hi Ravi,
I am using an internal activity and sometimes maiantaining ECP for activities also. But when i click on sales price system is not picking up the activity plan values. I tried different combinations on ODP1 but its not triggering the activity ecp values.
Characteristics i chose in the DIP profile are
1. Activity number   Char relevant
2.Cost element            do
3.Material                     do                   mat determination
4.object number          do
5.Transaction Currency do                 No Summarization
6.UOM                          do                      do
7.WBS                          do
i didnt selected structuring for any of these characteristics.
Could you pls tell me how to pick the activity into sales price screen.
Thanks in advance.
Rams

Want to pass STRS2 field into sales order and contract.

Hi Friends.
I am creating Sales order using function module IDOC_INPUT_ORDERS and Contract using SD_SALESDOCUMENT_CREATE.
Now I want to pass STRS2(House number field into Sales Order/Contract). In IDOC I tried to pass E1EDKA1-STRS2, but its not coming into Sales order output.But SD_SALESDOCUMENT_CREATE dont have an option to pass the field value.
So in that case how can I achieve the desired functionality, Is there any user exit or let me know the suitable method to achieve the functionality.
Thanks
Gowrishankar

Yes I tried that also.I passed the value from program to user exit MV45AFZZ and updated the structure XVBADR in USEREXIT_SAVE_DOCUMENT_PREPARE, but its not getting reflected in Sales Order/Contract.
Anyone have suggestion..plz let me know.
Thanks
Gowrishankar

Request: "Draw Document Wizard" when copying from Sales Order to A/R Invoic

Hi Colleagues
Our clients complain about not being able to choose the exchange rate from the base document when copying the Sales Order to A/R Invoice.
The "Draw Documents Wizard", where you can choose this option, starts only when you're in the "A/R Invoice" form and copying data from the Sales Order. But "Draw Document Wizard" doesn't start when you're in the Sales Order and copying all its data to an A/R Invoice, and they use only this sequence.
Is it possible to add the "Draw Documents Wizard" for the "Sales Order -> A/R Invoice" chain in one of the next versions of SAP BusinessOne 2007?
Thanks!

Hi,
is this happening for perticuler user or for all users.?
check any addon is running ,If yes stop addon and check again this activity.
Check general authorization too for perticuler user..
Hope it will help you.
Regards
Deepak Tyagi

Internal copy of sales order (ZORI) is printing on printer

Internal copy of sales order (ZORI) is printing on printer each time a credit block is released for only 1 user regarding the ZORI. The printing has started automatically about a year ago. Her colleagues don't get the printout when they release credit block.
Actually,when the credit block is released thru VKM3, the print does not triggered automatically for released blocked order.
But only one user always gets print out, which should not be happened.
can anybody help me out??

Can u explain in a more details about the issue.
As per my understanding there are a couple of users who are having ZORI type assigned
to thier partner function ,However only one user gets print al times .
And others don't.
If this is so then cross check with the abaper through debugging what actions are happening when
a credit block is released and i am sure there may be some hardcoding which is making this happen.
THanks
M.Naveen Kumar

Unable to copy a sales order

Hi,
Can any one suggest the solution.
when I m clicking on Ok button while copying a sales order, system is getting hanged and not responding. Ideally it should create RMA in entered status after Ok Button.
regards,
Gunjan

Hi Montee
If order is not delivered completey then you can maintain another line item.But If you are adding another line item, after billing is also completed then it is not possible .So check wheather any Material determination is done for the material or not.Also check wheather any user exit is working or not.So kindly check with your technical team
Thanks and Regards
Srinath

Can Multiple Objects be copied into Sales Order??????

Similar Messages

Maybe you are looking for