Can not start a program after upgrade to version 5.0

I upgrade the iphone to version 5.0 and after that I can not start any program installed exept for the program that come with the phone

Ray,
You might have been there but I would like to know are there any error footprints in the logs?
eg.:
on OVMM: */var/log/ovm-manager/*
on OVM server: */var/log/xen/* && */var/log/ovs-agent/*
--Dheeraj.                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Similar Messages

  • Can't start any program after upgrading to Mavericks from Mountain Lion.

    After upgrading my Macbook Pro from Mountain Lion to Mavericks, I can't start any program from the dock or finder.  The screen flashes briefly gray, then returns to the desktop.  I repairded permissions from the recovery partition.

    No need to repair permissions from the recovery partition. You can do that using the Disk Utility app located in HD > Applications > Utilities.
    As for the issues with your Mac. Check to see if the startup disk needs reparing. (not the same as permissions)
    The startup disk may need repairing ...
    Launch Disk Utility located in HD > Applications > Utillities
    Select the startup disk on the left then select the First Aid tab.
    Click:  Verify Disk  (not Verify Disk Permissions)
    If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to acces the built in utilities in  OS X Recovery
    Make sure to back up all important files first before using OS X Recovery.

  • Lenovo U350, can not start any programs at some point

    Hi experts,
    I ran again into some problems with my Lenovo U350 under Windows 7.
    All of a sudden, I can not start any program on my laptop after running it for a while. I click on the program I can see this program running in Task Manager but it does not show up on the screen.
    Also I can not restart my laptop normally by clicking either on buttons "Restart" or "Shut down" either. For some reason these buttons/commands stop working. The only way to deal with this problem is a hard shut down by holding the "Power On/Off" button pressed on the laptop for a few seconds.
    I ran the antivirus check on my laptop to find existing viruses but came out with the result of 0 viruses.
    I wonder why the programs on my laptop stop loading or freezing? Any ideas?
    I'm that close to reinstall the whole system with the OKR.
    Thanks for your replies in advance.
    Cheers,
    Randy.
    Solved!
    Go to Solution.

    yigit, thanks a lot for your reply.
    I tried to reinstall Windows on the weekend using the OKR. The problem was that I could start OKR under Windows 7 and choose the clean OS installation. Then my laptop restarts and I expected that reinstallation procedure would start next. But in reality what I have is just a normal Windows 7 Start. I also tried to start OKR by pressing an OKR button while my laptop is switched off. But same result - just a normal Windows 7 Start. Apparently, the OKR files are corrupted somehow.
    I have to mention 2 facts:
    1) I didn't change the partitions on my drive. These are the default factory partitions.
    2) Unfortunately, I didn't create the recovery discs when I bought my laptop.
    The question is how I can reinstall my system then? May I ask Lenovo for some recovery discs to ship to me if I still have a warranty?
    Thanks in advance for your future replies.
    Randy.
    P.S. yigit, I checked your mentioned thread. The problem is I don't receive any Windows message saying why it can't start programs. It just doesn't start without any error message that should come along with it.

  • After update the MacOSx V. 10.6.8, It can not start Parallels program

    Last week, I updated the Mac OS X ver. 10.6.8, now I can not start Parallels. When I start Parallels, open a window that say "Unable to load the Parallels driver", "restart the Mac", and I put OK, after in other window say "Unable to start the virtual machine. Un unexpected error occurred while starting the virtual machine." How is it resolve this error?

    reinstall Parallels Desktop after a restart.

  • Can not start SAP instance after change the profile

    Dear all
    We use system copy to build SAP system.
    Source
    Ecc 6.0(64 bit)
    Windows Server 2008 SP2
    SQL Server 2008 SP2
    Target
    Ecc 6.0(64 bit)
    Windows Server 2008 SP2
    SQL Server 2008 SP2
    In target system, we want to use the instance profile as source system,
    but after copy from source system we find that if parameter em address_space_mb = 512 in the profile,
    we can not start SAP instance.
    Could anyone explain it?
    Best regards
    Shirley

    Hi Shirley,
    I assume the hardware is less on the target than on the source or they are different at least in terms of hardware specs
    If the system is not starting, check the dev_disp.log, the stderr* files, and the dev_w0 log from the work directory to find the exact error. Does the system start if you increase or decrease this value?
    Regards,
    Paul

  • Can´t start Lightroom CC after upgrade

    Hi, I´ve just upgraded Lightroom 5.7 to Lightroom CC (6) via Creative Cloud. After the installation the program does not start. Nothing happens when I click on the program file. The old program, 5.7 starts.
    I have Windows 8.1 and I restarted Win after installation. I have allso reinstalled Creatvie Cloud.

    Thank´s Jim, I´ve got that answer from Adobe Chat too and now Lightroom works fine.
    Thank´s again,
    //Mikael

  • Can not start web server after power outage

    Hi All,
    I have a Cisco NSS322 running firmware v1.0.0. I have Web server with MySQL, file sharing on the box. after a power outage this morning, I could not access the web server anymore. I can access filesharing and web GUI management interface (port 8080). I login to the box via ssh, and do netstat -na, and found that the box does not listen on port 80.
    From Web GUI, I tick/untick the "Enable Web Server" number of time but can not turn on the services. The logs say re-lauch apache sucessfully.
    Could someone help please?
    thanks
    Tao Lao

    Also you're running on the engineering build of firmware. You might need to upgrade to latest versions.
    Jasbryan

  • IPhone 3GS can not detect SIM Card after upgraded to iOS 6.0.1

    Guys I really need your advice please...
    I upgraded my iPhone 3GS 32GB from iOS 5.1.1 to 6.0.1 a couple weeks ago and since then it can not detect the my SIM Card ever. Before it's been upgraded, the phone was working just fine, but now it's just like a gameboy to me. I've been trying to find solution and some stores want me too pay quite amount of money to fix it but I refused.
    By the way, it has been jailbroken with RedSnow, tethered of course... and all the features are working perfectly, the WiFi is working, syncing is working, Bluetooth is working, downloading apps from App Store is okay, but only Mail and Safari won't work. I haven't got a chance to go to Apple Service Center to fix it yet, but the store I went said that Apple may say the same.
    Thanks in advance.
    ps to Admin: I'm a newbie, so if I posted this in the wrong room please forgive me.

    rzulfikar wrote:
    Thanks Chris for your solution.
    But just for you know that I bought Apple to get the 'after service', they should've warn the users not to upgrade to a higher OS if it can caused the phone 'dead'. Mine was totally unusable when it's just been upgraded. It stayed in the recovery mode and couldn't be restored. So I brought it to the nearest store and they did that to me, and eventually the phone is working, only it cannot detect my SIM Card...
    The problem is not about upgrading an iPhone to a newer version of iOS.  Your problem was upgrading a hacked phone, one of the well known consequences of which is re-locking and/or bricking the entire device when restoring in iTunes.  You chose to hack your phones firmware and operating system, so you must accept the consequences of going outside the bounds of normal use that Apple prescribes and supports.
    Had you not hacked it in the first place, you likely would have never had a problem, and if you had, Apple would have offered support to deal with it.  Your choice, your decision, your consequences.

  • Can NOT access Service Registry after upgrading SOA Suite to 10.1.3.5

    Hi all,
    I have a SOA suite 10.1.3.1 installation with Oracle Service Registry 10.1.3.1 installed.
    After I upgrade SOA suite to 10.1.3.5, the Oracle Service Registry can not be accessed.
    When I access http://myServer:8888/uddi/bsc/web or https://myServer:4443/uddi/bsc/web
    The error is:
    javax.servlet.ServletException: java.lang.ClassNotFoundException
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:442)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at com.systinet.webfw.WebRawService.displayErrorPage(WebRawService.java:574)
         at com.systinet.webfw.WebRawService.process(WebRawService.java:363)
         at com.idoox.wasp.server.adaptor.RawAdaptorImpl.dispatch(RawAdaptorImpl.java:318)
         at com.idoox.wasp.server.AdaptorTemplate.doDispatch(AdaptorTemplate.java:356)
         at com.idoox.wasp.server.AdaptorTemplate.dispatch(AdaptorTemplate.java:328)
         at com.idoox.wasp.server.ServiceConnector.dispatch(ServiceConnector.java:393)
         at com.systinet.wasp.ServiceManagerImpl.dispatchRequest(ServiceManagerImpl.java:638)
         at com.systinet.wasp.ServiceManagerImpl.handleGetRequest(ServiceManagerImpl.java:1883)
         at com.systinet.wasp.ServiceManagerImpl.access$100(ServiceManagerImpl.java:131)
         at com.systinet.wasp.ServiceManagerImpl$DispatcherConnHandler.handleGet(ServiceManagerImpl.java:2598)
         at com.systinet.transport.servlet.server.Servlet.doGet(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    I tried reinstall Oracle Service Registry, same error.
    Todd

    Did you install the service registry in the same container as SOA suite, e.g. oc4j_soa.
    It is typically best practice to install into separate container so upgrades don't affect other applications.
    cheers
    James

  • Rdbms do not start with dependency after upgrade 11Gr2 under window 2003

    Hi,
    i finish to upgrade my 2 nodes cluster. I reboot the server just to be shure all the good dll are use.
    At the reboot i check the window services. My OracleServiceTest1 did not start automaticly. I check the dependency and this service depend on the OracleAsmService+ASM1.
    I even put a delay on the dependency, but the problem still real.
    The ASM service start without problem. The only way i can start the RDBMS i to do it manually in the window "Computer management".
    How i can generate a autostart off this service (RDBMS) when the service ASM start?
    I check my registery variables and they are all OK.
    Thanks for your help.

    I'm not shure if i will drop this service on a cluster.
    I can use the comand
    sc delete OracleServiceTest1
    to delete the service in Window. This action won't affect the cluster.
    But, how to recreate only this service in Window only?
    Edited by: Ron_B on 2010-04-28 12:44

  • Time machine can not access time capsule after upgrade from snow leopard to mountain lion

    Two days ago I upgraded my 2009 17" MBP from Snow Leopard to Mountain Lion. That evening my time capsule/time machine combination worked fine and did an incremental backup of about 12 gigabyte. Yesterday - only one day later - the time machine backup did not work anymore.
    It appears that the system can not find the time capsule - even though it shows the remaining free space on the time capsule (so it did find it after all).
    The message is always the same:
    Time Machine can not complete the backup "Time Capsule"
    The image of the backup volume "/Volumes/Data/Pauls MacBookPro.sparsebundle" is not accessable (Error -1).
    I also can not delete the backup image on the time capsule since it is read-only. And I do not want to format the time caspsule yet since my wife's MBAir is also using the same time casule.
    I tried out all kinds of suggestions (hard and soft resetting both the MBP and the TC, entering the password again, setting the TC up again) all to no avail. No backup is possible anymore.

    Mr. Zooot wrote:
    Time Machine can not complete the backup "Time Capsule"
    The image of the backup volume "/Volumes/Data/Pauls MacBookPro.sparsebundle" is not accessable (Error -1).
    I also can not delete the backup image on the time capsule since it is read-only.
    Sounds like you got this message earlier:
    If so, see #C13 in Time Machine - Troubleshooting.
    Offhand, I don't recall anyone not being able to delete one via the Finder (but most were only backing-up one Mac, so just erased the disk).
    You may have to wait for that message to appear again (24 hours later), or you might try holding Alt/Option with the TM icon in the menubar, and select Verify Backups if it will let you.

  • Can not turn on wifi after upgrade to iOS 7, Can not turn on wifi after upgrade to iOS 7

    I can not turn on my wifi after the upgrade.  Help

    Have the same problem.  When I turn off the devices with ios 7, my Apple devices that do not have ios 7 work fine.  I do not think it is the phone or device that is the problem so do not understand why people are being told to get a new device.

  • Can not view PDF's after upgrading to FF 4.0.

    Using FF3.6 I downloaded an Add-On that allowed me to view .pdf's directly in the browser. Now having upgraded {?} to FF4.0 I can not view automaticaly, nor are these Add-On's available for 4.0.
    What do I do?

    * You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
    * You can check the exceptions in Tools > Options > Content: Load Images > Exceptions
    * You can check the Tools > Page Info > Media tab for blocked images (scroll through all the images)
    There are also extensions (Tools > Add-ons > Extensions) that can block images.

  • Can not start Weblogic server after Reordering the provider

    Dear Geeks
    I have ran into big trouble. I defined a new authentication provider in the weblogic and set the Control Flag to 'Required'.
    I didn't realise that the user weblogic doesn't exist in the AD and because of AD's naming convention, we can not create a user named as weblogic.
    Since, the installation was done using the weblogic user and the authentication provider has been changed, is there a way to start the server back up.
    It is too critical and i am running out of time.
    I would appreciate if anyone out there could help.
    Thanks
    Regards
    ACM

    Hi,
    Goto Domain_home/config directory. Take one backup of config.xml, edit config.xml make Control Flag to SUFFICIENT against authentication provider that you have added. try to restart the server.
    please mark if this helps.
    Regards,
    Kishore

  • Can not send new emails after upgrading to firefox 13

    can not send new emails thru att.net (which is yahoo) since upgrading to firefox 13. Says "loading" and nothing happens. Can send new emails thru gmail

    Hi,
    Not sure about ATT but plain yahoo.com seems to be okay. Can you also please check this in a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile]. If the new profile is okay, you can then [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox] on the old (previous) profile via '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information'''.

Maybe you are looking for