Can scheduled tasks be set up using a Java Object?

I need to run a script that will create a scheduled task in
the Coldfusion Administrator CF8. I have used a Java Object to
register a custom tag and I am wondering if you can do the same
thing with a scheduled task.

No special java class/object is needed actually. ColdFusion
offers a built-in tag for this, <cfschedule>.
Read more here:
http://livedocs.adobe.com/coldfusion/8/Tags_r-s_11.html

Similar Messages

  • Any ideas how I can insert a pdf into word, using the insert object option. However the pdf i want to insert has text and lines annotated, but once inserted the comments don't appear????  any help would be greatly appreciated.

    Any ideas how I can insert a pdf into word, using the insert object option. However the pdf i want to insert has text and lines annotated, but once inserted the comments don't appear????  any help would be greatly appreciated.

    You will need to find a forum for MS Word since that is the software that you are trying to manipulate in this.  If you think the processing/creation of the PDF plays a role then you should ask in the forum for the software that you are using to create the PDF.
    This forum is for issue regarding downloading and installing Adobe trial products, so in any circumstance, your issue does not fit in this forum.

  • Can't create table that grows using the button object

    Im a beginner, and this seems like a simple issue. Appreciate your help in advance.  When I try to do this, the button fails to add a row.
    So, I printed out the Help section entitled, "create a table that grows using the button object" and started from scratch with a simple table as the only object on the form- and followed the instructions to the letter.
    When I go to preview and click the button, a row is not added.
    Can you suggest something?

    Try this:
    Select body row of table from hierarchy palette that you want to repeat then on he object tab of the properties tab select binding tab. You need to click on "Repeat Row for Each Data Item"
    I hope this helps
    Murat
    www.muratkuru.com.tr

  • How can i rename a jar file using only java code

    i have tried everything i can think of to accomplish this but nothing works.

    ghostbust555 wrote:
    In case you geniuses haven't realized I said I tried everything I can think of not that I tried everything. So help or shut up I realize that I didn't try everything but if you can't figure it out either DO NOT POST.
    And the question is how can i rename a jar file using java code? As it says in the title. Read.I would tell you to use the File.renameTo method, but surely that would have been obvious, and you would have tried it already? But maybe you didn't. You were kind of lacking in details in what you tried.
    And yes, I am a genius. Just don't confuse "genius" with "mind-reader".

  • Can we run the batch file using simple java application

    Hello sir,
    we want to run the batch file using simple java application. i tried with some example, we run the exe files but not batch file.
    Runtime r = Runtime.getRuntime();
    r.exec("D:\\jboss\\bin\\run.bat");
    My application is server will run when we run the java appliation.
    any suggestion? plz give me the solutions

    yes you can run html file
    WEB.SHOW_DOCUMENT is a built-in that is used in Forms to call URL from a Web Form. It works much like the similar way that a link on an HTML page works and it takes two arguments, one is URL and second one is TARGET, in your case use following.
    WEB.SHOW_DOCUMENT('http://channas.iil.informatics.lk:8890/forms/frmservlet?config=abc.html', '_blank');
    Hope this will work for you
    Abbas

  • Setting workflow payload as Java object

    Hello,
    The documentation for CQ workflows indicates that a Java object can be passed as the payload data for a workflow process.  I have a Java class that implements the WorkflowProcess interface and have hooked it up so I can invoke it programmatically.
    However the documentation does not give any insight on the "payload type" options other than "JCR_PATH".  If I use JCR_PATH then it expects the Object passed to be a string (a node path obviously).  Passing anything else will cause a class cast exception. Using any payload type other than JCR_PATH results in the log message "com.day.cq.workflow.impl.jcr.WorkflowManager No payload set" and the process does not get invoked correctly.  They show up in the Workflow instances UI as RUNNING and have no payload (basically stuck).
    Any help?

    That's a reasonable limitation of the implementation behind the interface. Just serialize your payload into a JCR node (or a node structure) and then add this node as payload to the workflow. The WF steps then process this node.
    A possible explanation for this: A workflow is guaranteed to be executed exactly once. So at the end of every workflow step the payload must be serialized to the repository to ensure that the next step can be repeated if it fails for any reason. So you can either serialize it yourself and upfront (the workflow then just updates this node struecture) or you would need some OR mapper here, which does this job for you. I prefer the first approach :-)
    kind regards,
    Jörg

  • JAXB : ClassCastException while using generated java objects

    Hi,
    I am using JAXB for unmarshalling my xml to set of java objects. It is working but when i use one child object and cast it i am getting ClassCastException.
    java.lang.ClassCastException: com.sun.org.apache.xerces.internal.dom.ElementNSImpl cannot be cast to com.xyz.base.EmployeeType
    My XSD
    ======
    <xsd:complexType name="EmployeeType">
    </xsd:complexType>
    <xsd:complexType name="EmployeeList">
         <xsd:sequence>
              <xsd:element name="Employee" type="base:EmployeeType" maxOccurs="unbounded"/>
         </xsd:sequence>
    </xsd:complexType>
    JAXB Binding
    ==========
    In Binding i am direct schema compiler to use ArrayList for EmployeeList.. as i want to use this as ArrayList.
    <jxb:bindings node="//xs:complexType[@name='EmployeeList']">
              <jxb:class ref="java.util.ArrayList"/>
    </jxb:bindings>
    Everything works well but when i extract element from EmployeeList (i.e. ArrayList) and try to type cast it to EmployeeType, getting following exception:
    java.lang.ClassCastException: com.sun.org.apache.xerces.internal.dom.ElementNSImpl cannot be cast to com.xyz.base.EmployeeType
    so at the time of unmarshalling how jaxb will know about the type of child element and use accordingly.
    Any help would be greatly appreciated.

    Hi,
    Could you try outputting the class type of the object you are trying to cast?
    Check the class of the object. Say use object.class.getName().
    I used jaxb quite a long time ago but I believe it resolves the classes correctly.

  • How to use the Java objects or methods in pl/sql function as a parameter

    dear all,
    I java object passed as a parameter in pl/sql. how can i access the java objects as parameter in pl/sql function. please give a soultion to me
    mohan reddy

    I'm not sure whether this would help you.
    Have a look at this program to list files from a directory.
    CREATE GLOBAL TEMPORARY TABLE DIR_LIST
    ( FILENAME VARCHAR2(255) )
    ON COMMIT DELETE ROWS
    Table created.
    create or replace
    and compile java source named "DirList"
    as
    import java.io.*;
    import java.sql.*;
    public class DirList
    public static void getList(String directory)
    throws SQLException
    File path = new File( directory );
    String[] list = path.list();
    String element;
    for(int i = 0; i < list.length; i++)
    element = list;
    #sql { INSERT INTO DIR_LIST (FILENAME)
    VALUES (:element) };
    Java created.
    SQL>
    create or replace
    procedure get_dir_list( p_directory in varchar2 )
    as language java
    name 'DirList.getList( java.lang.String )';
    SQL> exec get_dir_list( 'C:\Bhagat' );
    PL/SQL procedure successfully completed.
    Thanks,
    Bhagat

  • How can I tell what setting was used to create a received PDF?

    I get PDFs all the time and I can't find a way of knowing if the PDF was created using Press Quality, Standard, Smallest File size other than just looking at it and zooming in.
    Is there a menu item or trick that will tell me how this PDF was created?

    The image was almost 9 inches by 7 inches at 300 ppi and I reduced it to about 3 inches wide in my document. I almost never blow-up images unless they can take it without losing resolution.
    Maybe I'm not looking in the right place. I went to preflight > sheetfed offset, clicked on Analyze and got lots of readings. The one that said "Resolution of color and grayscale images is less than 150 ppi. This might be insufficient for proper print results." is the one that threw me.
    It's too bad that I just can't read how the file was created. Most of clients I deal with make PDFs and never look at the settings they use. I'm in the printing business.
    I've just been looking at the PDFs sent to me and zooming in to see if they'll hold up but I'd really like something more accurate.

  • Can Front Row be set to use VLC?

    I'd like to be able to play my .avi movies using front row, but it seems to default to using Quick Time, which doesn't play all of my movies. VLC works wonderfully, is there a way to make Front Row use VLC?
    Any help with this is appreciated, thanks. =)

    you can download divx for free, then you can play your avi files with quicktime, therefor allowing you to play them in frontrow... the divx codec is free... works well too..
    here is where you can download it..
    http://www.divx.com/

  • How can you upgrade appserver that is used by Java AVK for Enterprise

    Here is a question that I some times get from users:
    Question: I wanted to check what was involved in replacing the Appserver that is bundled with AVK1.4.1? I looked at the contents of the AVK bundle and noticed that it has an appserver directory. So, can a person just replace that directory with a later version like AS 8.1 UR2.
    Ans:
    No, one just can not delete the original appserver directory, install a new AS there and expect AVK to work. The previously installed AS (AVK installation bundle comes with 8.1 PE) had an instrumented instance (an instrumented instance has server classpath prefix and an additional JVM property which is not available in a normal instance). When one replaces that with a new installation, one has to again instrument the new instance. One can do an in place upgrade from 8.1 to 8.1 UR2. AFAIK in place upgrade is not recommended in production environment because it has some other side effects. But in development environment one can do inplace upgrade. That automatically keeps the settings that were used by previous AS in tact in the new AS. This means all the deployed apps are also available in the new AS.
    Question: Is there any other way to do upgrade the app server that is used by AVK?
    Ans:
    Another way to replace AS 8.1 by 8.1UR2 in AVK is (Don't do this if you have applications that are deployed, because the steps below would delete them, which means after you do this, you have to again deploy the applications, resources etc in the new AS):
    In the instructions below JAVKE_HOME points to installation root of JAVKE and it assumed that appserver is installed at $JAVKE_HOME/appserver. The instructions remain same for Windows except that '/' needs to be replaced by '\' and $ by a pair of '%' and rm to be replaced by del command.
    1) $JAVKE_HOME/appserver/bin/asadmin stop-domain domain1
    2) Uninstall $JAVKE_HOME/appserver. A simple rm -rf of this dir will also do. If you choose to uninstall, then please also do an rm -rf.
    3) Install 8.1UR2 PE at $JAVKE_HOME/appserver
    You can upgrade to any higher version AS provided it is of the family 8.1 PE. This means you can upgrade to 8.1 UR1/2/3 etc. Visit http://java.sun.com/j2ee/ to see latest release of Sun Java System Application Server.
    4) $JAVKE_HOME/appserver/bin/asadmin start-domain domain1
    5) Instrument the server by running the following commands
    $JAVKE_HOME/appserver/bin/asadmin set user admin password <password> host localhost port <typically port is 4848> server.java-config.classpath_prefix=$JAVKE_HOME/lib/javke.jar
    $JAVKE_HOME/appserver/bin/asadmin create-jvm-options user admin password <password> host localhost port <typically port is 4848> -Dj2ee.appverification.home=$JAVKE_HOME
    You can do this using the admin gui to do the above actions.
    6) restart the appserver for these changes to effect.
    Now AVK can be used with the new appserver.
    Hope it helps,
    Thanks,
    Sahoo

    Josh, this was my first gripe when I moved to IronPort toward the end of 2008; I forget the version of Asyncos we were on then. Remember that the design philosophy (as I'm given to understand it) is that you shouldn't have to nursemaid it as much as some other gateways, though achieving that is more a question of developing robust mail policies than simply plugging in the device and running the setup wizard.
    I found the Asyncos GUI a bit of a pain to work with for header analysis, but I've adapted over time. It's only an annoyance now when you need to see an attachment file name that scrolls across three or four screen widths, and by comparison SharePoint gives me more grief in that department (we're on a paleolithic version here).
    For some things we send a copy of quarantined items out to a dedicated mailbox only accessible by staff monitoring our gateways; for more details see my posting in your thread "Can't View Video Files Attached To Emails".

  • How to set schedule task in windows using java code

    Hi,
    i want to set the schedule task in windows os using the java code can any one help me on that
    can any one thinks i need to wright a dll file for that which set the schedule task for me which dll i can use in my java code.
    thanks in advance.

    Maybe this will help you?

  • How can I delete local schedule tasks, if they do not show up in the left ARD pain

    In ARD you can schedule task on the local machine.
    Usually you can see the scheduled task in the left pain of the main window.
    I deleated some schedules tasks, but the tasks continue excute every morning.
    Is the a way to find these invisable scheduled tasks and remove them.
    I would be happy to know if a data base needs to be edited or a file deleated
    Cheers
    Gifford

    what dose the invisible task do?

  • Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

    Hi,
    A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
    It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
    The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
    Would you be able to explain why and assist in resolving that issue?
    Here is what we know:
    When the backup is run manually via the Windows Backup Software UI, it works fine.
    When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
    start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
    If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
    Idem if you schedule task is run automatically at scheduled time.
    The schedule task run and complete successfully but the backup job does not start.
    It is confirmed by running the following in a command prompt as 'nt authority\system':
    schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
    SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
    Despite success result, the Backup job does not start running...
    No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
    If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
    Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
    <?xml version="1.0" encoding="UTF-16"?>
    <Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
      <RegistrationInfo>
        <Author>MYDOMAIN\SERVER1</Author>
        <SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
      </RegistrationInfo>
      <Triggers>
        <CalendarTrigger id="Trigger 1">
          <StartBoundary>2014-07-14T21:00:00</StartBoundary>
          <Enabled>true</Enabled>
          <ScheduleByDay>
            <DaysInterval>1</DaysInterval>
          </ScheduleByDay>
        </CalendarTrigger>
      </Triggers>
      <Principals>
        <Principal id="Author">
          <UserId>S-1-5-18</UserId>
          <RunLevel>HighestAvailable</RunLevel>
        </Principal>
      </Principals>
      <Settings>
        <MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
        <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
        <StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
        <AllowHardTerminate>true</AllowHardTerminate>
        <StartWhenAvailable>true</StartWhenAvailable>
        <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
        <IdleSettings>
          <StopOnIdleEnd>false</StopOnIdleEnd>
          <RestartOnIdle>false</RestartOnIdle>
        </IdleSettings>
        <AllowStartOnDemand>true</AllowStartOnDemand>
        <Enabled>true</Enabled>
        <Hidden>false</Hidden>
        <RunOnlyIfIdle>false</RunOnlyIfIdle>
        <DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
        <UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
        <WakeToRun>false</WakeToRun>
        <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
        <Priority>7</Priority>
      </Settings>
      <Actions Context="Author">
        <Exec>
          <Command>%windir%\System32\wbadmin.exe</Command>
          <Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
        </Exec>
      </Actions>
    </Task>
    Thank you in advance for your feedback.

    Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
    By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
    behavior and constitute a major bug in Windows Server 2012.
    From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
    This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
    it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
    As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
    constitute a bug of Windows Server 2012?
    Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
    done.
    We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
    sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
    needed!!!
    Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power?

  • OIM - Scheduled Tasks - Validade/Enable

    Hi All,
    I am quite new to OIM, two days working with it, and I have some questions that seem to be easy to answer but I could not find it here, neither on the internet (or I am not using the correct keywords).
    In our OIM environment we have some custom recon scheduled tasks, developed by oracle, and, as our internal processes with the targets are not working properly still, sometimes the scheduled tasks fail and when they fail they got disabled too. Most of the times they fail is because its input file, a CSV file coming from a target, is not there.
    Based on it, my questions are:
    1. I know there is a way to list all scheduled tasks and their status using the API, check this link: http://www.rameshgk.com/blog/2010/09/23/oim-scheduled-task-for-monitoring-other-scheduled-tasks/, but is there a way to do it by command line in Unix?
    2. Is there a way, when the schedulted tasks got disabled due to a failure, to enable it automatically, via API or any other method, without the need to go to web client?
    I was forgetting to comment one thing, unfortunately, I don't have access to the OIM database!
    Thanks for your attention!
    Regards.

    You can execute the scheduled task from the command line and use the following API:
    void updateScheduleTask(long scheduledTaskKey,
    java.util.Map attributes)
    throws Thor.API.Exceptions.tcAPIException,
    Thor.API.Exceptions.tcScheduledTaskNotFoundException,
    Thor.API.Exceptions.tcInvalidAttributeException,
    Thor.API.Exceptions.tcAttributeMissingException,
    tcAPIExceptionUpdates schedule task information based on the attribute that are passed to this method
    Parameters:
    scheduledTaskKey - the scheduled task key
    attributes - a map of updated attributes valid attributes
    •Task Scheduler.ClassName
    •Task Scheduler.Disable
    •Task Scheduler.Frequency Type
    •Task Scheduler.Interval
    •Task Scheduler.Key
    •Task Scheduler.Last Start Time
    •Task Scheduler.Last Stop Time
    •Task Scheduler.Max Retries
    •Task Scheduler.Name
    •Task Scheduler.Next Start Time
    •Task Scheduler.Retry Count
    •Task Scheduler.Start Time
    •Task Scheduler.Status
    You can provide the Frequency Type and Next Start Time and then it should be picked up. Just like when you are in the design console and you have it set to run once and you clear the entries in the time and set it to the current one.
    -Kevin
    Please don't forget to give points where earned on helpful posts.

Maybe you are looking for