Can't access uploaded file in weblogic server

I uploaded a file using java network and io classes.The file at the server location got permissions as rw-r----- after upload.
But I am not able to access the file after this upload using java Runtime.
When I execute a cp command to copy the file to another location a "can't access" error is returned.
Tried running the server using sudo but same error.
Weblogic server-10.3.5
Operating system-solaris 10
JDK6
Running in development mode.

Here is the zip file with all the code. MAIN VIDAQ is the top level.
Read VIDAQ Variables reads the .txt file.
Thanks,
Mark
Attachments:
SLDAQ Basic Software LV 2011 10.01.zip ‏1804 KB

Similar Messages

Can applet access a file on its server????????

i have ana applet that needs to access a file on the server from which it was downloaded. it worked when i changed the security permissions at IE to allow an UNSIGNED applet to access ALL FILES.
now this is a problem for me. is there a way i can move around this or maybe signing the applet would work, though i don't know how....
help would be highly appreciated.
sam

File access (read) on the server should be possible as long as you are accessing the file and applet using HTTP. IE will not see this as an access violation. Sending updates to the file is a different story. You either need to create a servlet running on the server to accept the updated file or access the server via FTP. Browsers do not interpret direct file access as coming from the same server even if it does. I think this has something to do with the fact that you are using the local file system to access the server even if it is on a networked drive or location.
And yes, signing the applet would resolve the issue.

Can I access a file on a server where the path is password protected?

I have a file stored on a computer in a remote location. This file must be accessed by multiple test computers to update the test results. I need to access the file to collect the results. Currently, I have to log in to the remote computer via file manager and tell file manager to remember the password so that LabVIEW will be able to access the test result file. Is there a way that LabVIEW can do this? I do not want the test computers to remain logged in to the remote computer, as someome may be able to accidently corrupt the file.
Thanks.
Solved!
Go to Solution.

This question has come up before. Did you try a search? You can use the "net use" command via System Exec to mount the network share, and then you can disconnect it. Do a search on "net use", or just type "net help use" at a command prompt.

Can we Deploy .fmx files on weblogic server 10.1/10.3?

Hi,
currently we are using oracle Application server to run forms. Now we are palnning to migrate to weblogic. Can some one give me advice or documentation links where to start ? is WLS enough or do i need to get Weblogic portal ?
Thanks
Rao
Edited by: user11985073 on Nov 30, 2010 7:45 AM

See here http://download.oracle.com/docs/cd/E17904_01/web.1111/e10240/toc.htm especially the section
Basics of Deploying Oracle Forms Applications (http://download.oracle.com/docs/cd/E17904_01/web.1111/e10240/basics.htm#i1004293)
Some notes about upgrading can be found here: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e10394/toc.htm

How do I access uploaded files ?

How can I access uploaded files which have seemed to have vanished ?

Hi,
Please log in https://files.acrobat.com with your Adobe ID and pasdword and sort your file by "Date Added" and check if you can find the uploaded file.
Hisami

How can we access the file/directory system in the server

Hi friends,
I have made a text editor attached with an audio player for my project.
Both text editor and audio player are implemented in applet and put in to a
jsp page using jsp:plugin. Text editor and player are separate applets running
in the same page and from same server.A client who is using this editor may
want to save the edited text files to the server as well as hear audio files from
directories in the server.
My question is how can we access the file/directory system in the server
like we do in the local machine.When the user cliks save or openfromserver button
in the editor, folder/files in the server must be displayed as we do with FileChooser.
I am using Apache Tomcat 5,wiindows 2000 server, jdk1.5.
manu

You can't access it directly. But your applet can make net connections to the server, and the server can provide that kind of functionality. Generally this is easiest by making HTTP connections and having the server provide the functionality via the web server. (So in your case, JSPs or servlets on the server would list/deliver/create/modify/delete files, and the applets would invoke those JSPs and servlets.

Can anyone tell me Why?Missing license file for: WebLogic Server 6.1

Thank you for take a look and give me solution!
Missing license file for: WebLogic Server 6.1
Error encountered:
java.sql.SQLException: Fail to load jDriver/Oracle due to license checking failed!

make sure the folder in which the license file exists, is in the classpath
sree
"Robert" <[email protected]> wrote in message
news:3b57da5e$[email protected]..
>
"Roberto" <[email protected]> wrote:
Thank you for take a look and give me solution!
Missing license file for: WebLogic Server 6.1
Error encountered:
java.sql.SQLException: Fail to load jDriver/Oracle due to license
checking
failed!

HT4859 Can't access my files uploaded to iCloud, yet iCloud shows 2 out of 5 gigs used. How can I access my files?

I recently had an issues with my old iPhone 4s. I took it in to the apple store but the night before made sure I backed up my files to iCloud. After doing so I made sure my files were backed up because it went from 0 of 5 gigs to 2 of 5 gigs used. When I got my new phone, also an 4s, I tried to recover my contacts and pictures from iCloud, yet nothing happened. When I logged into icloud.com it shows no old contacts, actually none at all. I also can't figure out how to access my old pictures and files on icloud.com. When I go to icloud's settings on my iPhone it clearly shows 2 gigs of files yet when I try to restore the files to my new phone nothing actually gets added to the new phone. How can I access these files???? Anyone have any idea??

just tried restoring from backup and it didn't list it as one of the backup options after i wipe out the iphone yet for some reason it shows up when i go through settings>>>manage storage. thanks anyway. i may have to bite the bullet and sit and wait for a few hours at the apple store, argh...

Help in executing jsp files using weblogic server 6.0.

          I have an operating system Windows2000, i have downloaded 30 day trial version of weblogic server 6.0.
          I have a file called hello.jsp.
          Where do i have to save hello.jsp file in weblogic server 6.0.
          How do i execute hello.jsp through browser using weblogic server6.0.
          As there is no properties file in weblogic server6.0.
          TO run it i started default server and when i started default console it got opened in the browser as http://127.0.0.1:7001/console/index.jsp
          Where do i have to save it and how do i open it in the browser.
          Any help will be greatly appreciated.
          Thanks,


          I started the Start default Server and opened the http://localhost:7001/ in the bowser and by default
          this loaded the index.html file
          and when i tried to change index.html to hello.jsp i got the same error message as before
          Error 404--Not Found
          From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
          10.4.5 404 Not Found
          The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
          If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
          "mils" <[email protected]> wrote:
          >
          >There are quite a few reasons it couldn't be working, and things you can try...
          >
          >Ensure there are no errors on startup of the server in the console, especially that there is not an error about another web listener running on the same port.
          >
          >Try just http://localhost:7001 by default this should load the index.html file that comes with the WebLogic installation.
          >
          >If you are running on a corporate LAN, your browser settings may not be set correctly to find "localhost", ensure that your browser is not using a proxy server for local addresses, or put localhost:7001 in the list of exceptions for which the browser should not look at the proxy server.
          >
          >Hope this helps!
          >
          >"Red" <[email protected]> wrote:
          >>
          >>I created hello.jsp file under E:\weblogic\wlserver6.0\config\mydomain\applications\DefaultWebApp_myserver\hello.jsp
          >>and i started the Start Default Server and when i try to open
          >>http://localhost:7001/hello.jsp in the browser
          >>getting an error message as
          >>
          >>Error 404--Not Found
          >>From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
          >>10.4.5 404 Not Found
          >>The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
          >>
          >>If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
          >>
          >>Any help?
          >>
          >>
          >>
          >>
          >>
          >>
          >>
          >>
          >>
          >>
          >>
          >>
          >>
          >>
          >>"Mils" <[email protected]> wrote:
          >>>
          >>>In WebLogic 6.0, to run simple JSP pages with the default installation, the JSP files should be put in....
          >>>
          >>>C:\bea\wlserver6.0\config\DefaultWebApp_myserver
          >>>
          >>>...assuming you installation was on the C: drive.
          >>>
          >>>To access a file bar.jsp in this directory, go to http://localhost:7001/bar.jsp
          >>>
          >>>"Red" <[email protected]> wrote:
          >>>>
          >>>>I have an operating system Windows2000, i have downloaded 30 day trial version of weblogic server 6.0.
          >>>>I have a file called hello.jsp.
          >>>>Where do i have to save hello.jsp file in weblogic server 6.0.
          >>>>How do i execute hello.jsp through browser using weblogic server6.0.
          >>>>As there is no properties file in weblogic server6.0.
          >>>>
          >>>>TO run it i started default server and when i started default console it got opened in the browser as http://127.0.0.1:7001/console/index.jsp
          >>>>
          >>>>Where do i have to save it and how do i open it in the browser.
          >>>>
          >>>>Any help will be greatly appreciated.
          >>>>Thanks,
          >>>>
          >>>>
          >>>>
          >>>>
          >>>
          >>
          >

Tcode to upload file to SRM Server.

Hi,
We have a requirement to upload file into application server and then read the data into internal table.
In ECC we can use the tcode CG3Y/CG3Z but this Tcode is not available in SRM Server,
Can anyone suggest corresponding tcode in SRM server to upload data into application server.
Thanks in advance,
Jerin

Jerin,
Please go throgh the below link which will help for upload the contracts.
http://help.sap.com/saphelp_srm40/helpdata/en/e5/2c85403e1b6e1de10000000a1550b0/content.htm
Best Regards,
NMK

Reg: How to Run a Script File in WebLogic Server 10.3.3

Hi WebLogic Experts,
In our project we are using WebLogic Serve 10.3.3. I need to run one script file. could you please suggest me where should i need to place that script file in WebLogic Server 10.3.3 and How to run & stop that Script file.?
please experts i waiting for your's reply..
Thanks & Regards,
Induja..

1. You can put a command line into startWebLogic.sh to start your script file.
2. In your proyect you can create a java class to run the script file.
3. You can create a java class to run the script file an setup it like a startup class into weblogic server.
4. You can create a java class to run the script file an setup it like a job scheduler into weblogic server.
In what time you need run this script file?

Location for dll files in weblogic server 6.1 sp2

"where to keep *.dll files in weblogic server 6.1 sp2". Application is deployed on weblogic server 6.1 sp2. Application is being integrated with webmethod to publish data. For that we need to put awssl40jn.dll in weblogic server. Could not able to locate where to put this dll file.

You can have the dll's anywhere. You just need to mention the location
in java.library.path.
For example if you have your Dll's in C:\bea\lib
You need to mention the following in your command line args:
java -Djava.library.path=C:\bea\lib ****Other Command Line Args****
weblogic.Server
Hope this helps.
-Kiran
"Dave Martin" <[email protected]> wrote in message news:<[email protected]>...
I don't see a DLL like yours in a fresh install of WLS 6.1 SP2
This is the complete list of DLLs I find in my fresh install of WLS 6.1 SP2 (starting
from the BEA home) on Windows:
/jdk131/bin/dt_shmem.dll
/jdk131/bin/dt_socket.dll
/jdk131/bin/jdwp.dll
/jdk131/jre/bin/ActPanel.dll
/jdk131/jre/bin/agent.dll
/jdk131/jre/bin/awt.dll
/jdk131/jre/bin/classic/jvm.dll
/jdk131/jre/bin/cmm.dll
/jdk131/jre/bin/dcpr.dll
/jdk131/jre/bin/dt_socket.dll
/jdk131/jre/bin/fontmanager.dll
/jdk131/jre/bin/hotspot/jvm.dll
/jdk131/jre/bin/hpi.dll
/jdk131/jre/bin/hprof.dll
/jdk131/jre/bin/ioser12.dll
/jdk131/jre/bin/java.dll
/jdk131/jre/bin/jawt.dll
/jdk131/jre/bin/jcov.dll
/jdk131/jre/bin/JdbcOdbc.dll
/jdk131/jre/bin/jdwp.dll
/jdk131/jre/bin/jpeg.dll
/jdk131/jre/bin/jpins32.dll
/jdk131/jre/bin/jpishare.dll
/jdk131/jre/bin/jsound.dll
/jdk131/jre/bin/msvcrt.dll
/jdk131/jre/bin/net.dll
/jdk131/jre/bin/NPJava11.dll
/jdk131/jre/bin/NPJava12.dll
/jdk131/jre/bin/NPJava131.dll
/jdk131/jre/bin/NPJava32.dll
/jdk131/jre/bin/NPOJI600.dll
/jdk131/jre/bin/packager.dll
/jdk131/jre/bin/server/jvm.dll
/jdk131/jre/bin/server/jvm_g.dll
/jdk131/jre/bin/verify.dll
/jdk131/jre/bin/zip.dll
/wlserver6.1/bin/fastfile.dll
/wlserver6.1/bin/iisforward.dll
/wlserver6.1/bin/iisproxy.dll
/wlserver6.1/bin/jsafe.dll
/wlserver6.1/bin/md5.dll
/wlserver6.1/bin/md5_g.dll
/wlserver6.1/bin/nodemanager.dll
/wlserver6.1/bin/oci816_7/weblogicoci37.dll
/wlserver6.1/bin/oci816_7/weblogicoxa37.dll
/wlserver6.1/bin/oci816_8/weblogicoci37.dll
/wlserver6.1/bin/oci816_8/weblogicoxa37.dll
/wlserver6.1/bin/oci817_8/weblogicoci37.dll
/wlserver6.1/bin/oci817_8/weblogicoxa37.dll
/wlserver6.1/bin/oci901_8/weblogicoci37.dll
/wlserver6.1/bin/oci901_8/weblogicoxa37.dll
/wlserver6.1/bin/proxy30.dll
/wlserver6.1/bin/proxy35.dll
/wlserver6.1/bin/proxy36.dll
/wlserver6.1/bin/stackdump.dll
/wlserver6.1/bin/stackdump_g.dll
/wlserver6.1/bin/terminalio.dll
/wlserver6.1/bin/wlenv.dll
/wlserver6.1/bin/wlntio.dll
/wlserver6.1/bin/wlntio_g.dll
/wlserver6.1/bin/wlntrealm.dll
/wlserver6.1/bin/wlntrealm_ms.dll
/wlserver6.1/uninstaller/resource/iawin32.dll
/wlserver6.1/uninstaller_servicepack/resource/iawin32.dll
manoj <[email protected]> wrote:
"where to keep *.dll files in weblogic server 6.1 sp2". Application is
deployed on weblogic server 6.1 sp2. Application is being integrated
with webmethod to publish data. For that we need to put awssl40jn.dll
in weblogic server. Could not able to locate where to put this dll file.

How to deploy an Ear File into Weblogic Server

Hello,
i have created an ADF application successfully and make it as an EAR file.
How can we deploy that EAR file into weblogic server..?
Let me know step-by-step procedure.
Regards.

Hi,
Steps to deploy EAR file on Weblogic server:
1) login to http://<hostname>:<port>/console
2) Go to deployments and then install your ear on weblogic server.
Also you will need to create a data source with same name as given in your Application Module.
Following link contains steps for data source creation - http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.html ( section - "Configure a JDBC Data Source")
Thanks,
Randhir

Store File into weblogic server location

Hi,
I want to store Upload file into weblogic servers location Using programatically.
Can any one please help ? Its very urgent.
Thanks &Regards
Bhaskar
Edited by: 920422 on Mar 20, 2012 3:18 AM

Hi EJP, This should also be removed from the Java Card forum as it doesn't relate to smartcards at all.
Shane

All my desktop icons are Adobe Reader icons, can't access related files

I was trying to open a file this morning, and when a pop-menu asked what application I wanted to choose (from a list) to open it, I clicked on Adobe Reader - just as a guess. After that, just about all my desktop icons are Adobe icons, and when I click on them, the pop up menus says I can't access the file. These icons also show up on my menu of all my MS Office programs like Outlook, Word, Excel, etc.
Tech support at Adobe recommended I use System Restore, but it also is now an Adobe icon, so I can't open it. If anyone can help reverse this, I'd greatly appreciate it.
Thanks,
David

Hi,
This also happened to me this morning. Now all my icons are PDF symbols and Reader opens when I try to open any other program. I uninstalled Reader it and it fixed itself but when I reinstalled the program the same issue occurred.
I wanted to make PDF reader the default application when openning PDF's vs. Distiller, tinkered and broke my computer.
Any clues on how to bring everything back to normaL?

Can't access uploaded file in weblogic server

Similar Messages

Maybe you are looking for