Can't add release key C90
Apologies in advance if this issue has been covered.
Obtained release via email from TAC..uploaded and installed TCNC7.3.0.8cb420c
Diagnostics reports missing release key, click "add valid release key"
...field for adding release key nowhere to be seen...
What have missed?
Thanks in advance smart people.
I noticed you uploaded the non-encrypted version of TC7 software, is that the correct version that was previously installed?
You should be able to enter the release key using the API command below through either the web interface under Configuration > API or using SSH.
xCommand SystemUnit ReleaseKey Add
if that doesn't work, you can perform a software image swap to the other software image you upgraded from under Maintenance > System Recovery. Switching back to the other software image can atleast get you back online in the time being if adding the release key doesn't work.
Similar Messages
-
How can I add the key listener to JFrame
Hi,
How can I add the Key Listener to the JFrame? I want to show the Windows default popup which comes after right clicking on the frame's header. I want to add the key board support for the same1. Make sure that key events are enabled on your component. (AWTMulticaster.enableEvents(...)
2. add the keylistener -
To add new key figure in existing info cube (BI 7.0)
I m using BI 7.0
How can I add new Key figure in my existing info cube?
Thanks
KShi,
check the following the links
http://help.sap.com/saphelp_nw04s/helpdata/en/58/85e5414f070640e10000000a1550b0/frameset.htm
thread's regarding remodeling
Remodeling Toolbox
Remodelling option in 7.0
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=remodeling+&adv=true&sdn_author_name=&sortby=cm_rnd_rankvalue
hope this help you
happy new year 2008
regards
harikrishna N -
Passphrase left blank but not taken to page where I can add WEP key per instructions?
Hi... can anyone help me with this relatively simple question?
Model: WVC54GCA
Step "N" tells me to leave the "passphrase" field blank if I want to manually add the WEP key on the following screen. It says to hit next which will bring me to this page. However, I am not brought to a page where I can add the WEP key instead just to a page with a summary of settings. I've tried resetting over 10 times and going through the directions again to see if I missed something, but it seems as if this software just has a bug that takes the user to the wrong page? Does anyone know what I'm doing wrong? I'm just trying to get to a page where I can manually add the WEP key. THank you very much.To setup your Camera rather than using the CD setup you should use it's web interface...
1. Connect your Camera to a computer, click on the Start button >>> Settings >>> Control Panel >>> Network Connections - Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0...Click on Ok button to Save and Click on "Close" on main Properties window...
2. Now open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.115.
Use admin for both Username & Password in lower case...It should open your Camera set-up...
3. Once you get to the set-up page you can follow this link to change the Camera Settings...While changing the Camera settings you have to make sure that the Wireless Settings(SSID/Network Name and WEP Key) are identical on both the devices(router and camera)...Also make sure to change the camera's default IP to match your network and Gateway Address should be your router's address...ex. Camera's IP Address : 192.168.1.115(assuming your router's default address is 192.168.1.1), Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1.
4. After configuring the Camera you should disconnect it from the Computer and go into Local Area Connection TCP/IP Properties and set it back to Obtain IP Address Automatically...Disconnect the Camera from the computer and power cycle both the devices(Camera and Router)...Your camera should be configured...
In case if you don't get the Camera set-up just leave it connected to your computer and reset it for 30 seconds...
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your Camera, wait for 30 seconds and re-connect the power cable...Follow Step 2, Step 3 & Step 4... -
Can we add customer logo in performance document printable page in Fusion Performance management Release 9
Yes - this is a BI Publisher report and you can edit the template to format per your customer requirements. I'd suggest that you save a copy of the changes to file because the report may or may not be overwritten during upgrades.
John -
I am trying to save some software instrument regions I've created as loops that I can add to the Loops librar so I can easy add them to other projects. Everywhere I look for how to do this, I am instructed to select the region, then go to Edit > Add to Loop Library. The problem is that this option is not in m Edit menu at all. I have tried closing and re-opening GB, rebooting the computer, and making sure I have the latest version of GB. But no mater what I've tried, this option does not appear in my Edit menu. What am I doing wrong?
The othe rmethod I've tried is dragging the region over from the main window to the loops menu and dropping it in there. But when I click-hold and drag the region, it simpl slides it around the timeline as if I am trying to move it further behind in the track. It does not allow me to drop it in the Loops menu.
Any help?In GarageBand 10 it will look like it is not working, it is a bit confusing, but try this:
Cut the region you want to turn into a loop exactly at the bar line.
Show the loop browser pane.
Select the region, grab it with the mouse and drag it over to the loop browser.
It will look, like you were shifting the loop in the track - simply ignore this.
Release the mouse, when it is over the loop browser and the panel to add the loop should open.
Name the loop and set the attributs to index it. -
Hello,
I was wondering if I could add my existing, licensed apps to the list of app 'Purchases' that I have on the Mac App Store.
The reason for this is that I recently suffered the inevitable hard disk failure and I had to rebuild my MacBook Pro from scratch (with the help of Time Machine and Migration Assistant, etc.). As usual, I hadn't really maintained my MBP for quite a while and things sort of got away from me, in terms of data, apps, preferences, permissions, users (my personal account, my wife's account, my old work account...), etc.
So I wanted to rebuild my MBP on a clean slate. I like having the ability to quickly download and install just the right apps that I "really" need from MAS safe in the knowledge that:
they are there (assuming they're still available through MAS) with a full description of what they do and when I bought them, etc.
they are going to be in the most up-to-date version,
I'll be able to download and install them cleanly with no corruption from years of multiple user preference changes and permissions, etc.
that they will be managed and maintained (updated) through the same mechanism,
so much more.
The benefits of having apps from MAS are easy to see when compared to going through my downloads folder and emails looking for the latest installers, working out what they're for in the first place, finding the license key in some forgotten e-mail, etc.
I am aware that I can build a clean machine and then restore just the right apps in their most up-to-date version as I had them on my backups. The one thing to say about that is that the apps may have been used and abused once too many times and their preferences, etc. may not be in the most desirable form. It's just not as elegant as the MAS solution.
I realise that not all apps, app versions, or app vendors, are available through MAS. But I still have a fair few apps currently available on MAS that were bought prior to the existence of MAS, prior to them becoming available on MAS, or were bought directly for some other reason (by mistake).
So I wondered if there was any way I could convert my legitimate licenses from simply a direct purchase to one through MAS and have those apps listed under my 'Purchases' list. It would reduce the amount of work I'd have to do, not only to rebuild my machine but also to maintain it.
I cannot find any reference or way of having this work the way I would like it to. But I was hoping that some Apple guru would enlighten me.
I have thought about the possible mechanisms something like this would need to work and I must admit I see some not insurmountable issues (not as much technical as legal or possibly logistical). I realise that MAS is a service in its own right and as such has its own Terms, Conditions and Licensing that may not be compatible with the licenses that I already have. I also realise that when I purchase an app from MAS that I'm paying for the entire service including updates and use on multiple machines that I may own, etc. Obviously I do not want to pay the full purchase cost again for the same app twice, but I am willing to pay a small conversion/upgrade fee to have it managed as part of my 'Purchases' on MAS. Think of it in the same terms as iTunes works. I can purchase music, etc. but I can also add my own CD collection and have it managed by iTunes and store it in the cloud should anything go wrong with my local machine, etc.
So if this is currently not possible, then for the Apple MAS product managers out there, consider this as a suggestion/feedback. I'd be happy to discuss my thoughts in more detail about not only how to achieve this for now but also for the future when you may add existing applications to MAS that people may have previously bought direct and would like to have managed through MAS going forward. The benefits to the users are hopefully clear, but from Apple's perspective I hope that you can see the advantages too, commercially, etc.
PS: I apologise for the wordiness of my query and overuse of 'etc.', etc.Can I add my existing, licensed apps to my list of 'Purchases' on the Mac App Store so I don't have to buy them twice?
No. Only apps purchased from the App Store can be re downloaded for free including updates. -
My spooler won't stay running, I can't add printers.
My spooler won't stay running, I can't add printers.
Not able to figure out even after firewall on/off, network on/off and all setting to default...
Regards
Reddyfind some possibility solution for spooler wont start here
https://social.technet.microsoft.com/Forums/en-US/d875ab83-1b17-4a28-8738-e67249a2bdfd/cannot-print-after-update-to-81-printers-gone-print-spooler-keeps-stopping-cannot-add?forum=w8itprohardware
I recommended this step
1. do printer troubleshooting
http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-8&v1h=win8tab3&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
2. Uninstall antivirus using removal tools (Kapersky)
3. Registry trick as
JSB43211 suggested, backup your registry before perform this
1. Open Regedit as Administrator
2. Find the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\ key.
3. If you are on a 64-Bit machine, browse to the "Windows x64" sub-key (else "Windows NT x86")
4. Under the "Print Processors" sub-key DELETE ALL THE SUB-KEYS EXCEPT "winprint" key
5. Start the Print Spooler service.
6. Test to see if you can Add a printer. -
I already have an ipad, iPhone and iPod on my iTunes. Can I add my wife's iPhone to my iTunes?
I already use iTunes for iPhone4, iPad and iPod classic. Can I add another iPhone4 now my wife has one? If I already set up an Apple ID for her, do I now need to keep the two separate or can I simply erase that Apple ID and put all devices and Itunes through the one Apple ID/iTunes?
It's alright, I don't have a Mac so I get confused too. The option key should be somewhere to the left of the space bar and look like it is trying to represent railway points.
I don't know how migration assistant works, but presumably it has dumped an iTunes folder somewhere on the Mac. Inside that should be a file called iTunes Library.itl that is the core of the library. Unfortunately iTunes "thinks different" so we can't just double click the file to open it, that opens whatever the "current" library is instead, so you'll need to hold down option (shift for Windows) to get a dialog to choose or create a library. Click choose and browse to the relevant file.
If iTunes can't play your music at this point and gives the exclamation mark of doom then we need to go back to the Windows 7 library, tweak it up for easy export then bring it over again. Overview here. Customized instructions on request.
tt2 -
Can I add a second account to Adobe Digital Editions
I have two adobe reader accounts. One for my family one for personnel use. The computer has my personnel account on it. I want to add the family account to add books to my wifes nook. Can not seem to find out how to do that
Hi manobird,
If you used one ID to install ADE, you cannot download an ebook from a site into ADE if you used a different ID. That's the way the Digital
Millenium Copyright Act of 2000 was implemented to prevent unauthorized copying of ematerials. ADE tells you that in its HELP section. You can't add a second ID to ADE either, for the same reason.
What you CAN do is to change users, and authorize ADE with the same ID you used when you downloaded the ebook. You do this by bringing ADE up, then using the CNTLSHIFTD key combination, you will deauthorize ADE. Close ADE and reopen it, and ADE should ask you to authorize it. At this point, you can enter the second ID, and ADE will take off from there. BUT, keep in mind that any other ebooks you downloaded into ADE with the first ID will not be accessible until you go through the same process again and revert to the first ID.
Hope this helps! -
How can i add a new characteristic to Sap standard InfoObject?
Hi Experts,
Please anyone let me know how can I add a new characteristic or a key figure into an SAP standard InfoObject in order to add it to the standard InfoCube? The situation is I would like to add region and business unit to the characteristics of the Industrial Hygiene and Safety. After that, I would like to add them to the InfoCube called Accidents: Person Involved [0EIH_C02] that is located in the MultiProvider called Accidents: Complete View [0EIH_MC01]. Is it feasible to do this way?
I just learned the BW/BI, so please help me with this. I would really appreciate your responses.
Thanks,
-NapadolHi Napadol,
To add a attribute in a char:
1) Go to info object/char in change mode and add the additional attribute you want and select navigational attribute in attribute tab if you want. (Create these additional attribute first in info object catalouge)
2) Activate the Object/Char
3) open info cube in change mode and pick the characteristic from left panel to info cube dimension.
4) Activate infocube.
5) Go to multi provider add the char in one of the dimension and do identification for this char and activate.
Regards,
Kams -
How can I add a new column in compress partition table.
I have a compress partition table when I add a new column in that table it give me an error "ORA-22856: CANNOT ADD COLUMNS TO OBJECT TABLES". I had cretaed a table in this clause. How can I add a new column in compress partition table.
CREATE TABLE Employee
Empno Number,
Tr_Date Date
COMPRESS PARTITION BY RANGE (Tr_Date)
PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
PARTITION JUNK Values LESS THAN (MAXVALUE));
Note :
When I create table with this clause it will allow me to add a column.
CREATE TABLE Employee
Empno Number,
Tr_Date Date
PARTITION BY RANGE (Tr_Date)
PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
PARTITION JUNK Values LESS THAN (MAXVALUE));
But for this I have to drop and recreate the table and I dont want this becaue my table is in online state i cannot take a risk. Please give me best solution.Hi Fahed,
I guess, you are using Oracle 9i Database Release 9.2.0.2 and the Table which you need to alter is in OLTP environment where data is usually inserted using regular inserts. As a result, these tables generally do not get much benefit from using table compression. Table compression works best on read-only tables that are loaded once but read many times. Tables used in data warehousing applications, for example, are great candidates for table compression.
Reference : http://www.oracle.com/technology/oramag/oracle/04-mar/o24tech_data.html
Topic : When to Use Table Compression
Bug
Reference : http://dba.ipbhost.com/lofiversion/index.php/t147.html
BUG:<2421054>
Affects: RDBMS (9-A0)
NB: FIXED
Abstract: ENH: Allow ALTER TABLE to ADD/DROP columns for tables using COMPRESS feature
Details:
This is an enhancement to allow "ALTER TABLE" to ADD/DROP
columns for tables using the COMPRESS feature.
In 9i errors are reported for ADD/DROP but the text may
be misleading:
eg:
ADD column fails with "ORA-22856: cannot add columns to object tables"
DROP column fails with "ORA-12996: cannot drop system-generated virtual column"
Note that a table which was previously marked as compress which has
now been altered to NOCOMPRESS also signals such errors as the
underlying table could still contain COMPRESS format datablocks.
As of 10i ADD/SET UNUSED is allowed provided the ADD has no default value.
Best Regards,
Muhammad Waseem Haroon
[email protected] -
How can I add file attachment to my form and get the attachment by email?
I'm using this code and it works fine, but I don't get the attachment file in the email. How can I add this to my code?
HTML
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<script src="http://code.jquery.com/jquery-latest.js" type="text/javascript"></script>
<script src="http://dev.jquery.com/view/trunk/plugins/validate/jquery.validate.js" type="text/javascript"></script>
<script type="text/javascript">// <![CDATA[
$(document).ready(function() {
$("#form1").validate({
rules: {
first: "required",// simple rule, converted to {required:true}
email: {// compound rule
required: true,
email: true
last: {
last: true
comment: {
required: true
messages: {
comment: "Please enter a comment."
// ]]></script>
<script type="text/javascript">// <![CDATA[
function validate ()
if (document.form1.first.value == "")
alert("Please enter your First Name");
document.form1.first.focus();
document.form1.first.style.border="1px solid red";
return false;
else if (document.form1.last.value == "")
alert("Please enter your Last Name");
document.form1.last.focus();
document.form1.last.style.border="1px solid red";
return false;
else if (document.form1.emailaddress.value == "")
alert("Please enter your Email Address");
document.form1.emailaddress.focus();
document.form1.emailaddress.style.border="1px solid red";
return false;
function has_focus() {
if(document.form1.first.value == "")
document.form1.first.focus();
document.form1.style.first.border="1px solid green";
function set_focus(x)
document.getElementById(x).style.border="1px solid #80CA75";
function clear_focus(x)
document.getElementById(x).style.border="1px solid #DBDFE6";
// ]]></script>
</head>
<body>
<p><span style="color: #666666; text-align: center; font-size: 13px;">Please complete this form if you have any technical issue.</span></p>
<form id="form1" action="http://www.southsun.com/php/tech_issue.php" enctype="multipart/form-data" method="post">
<table style="width: 850px; font-size: 15px; padding-left: 20px; text-align: center;" border="0">
<tbody>
<tr>
<td style="text-align: left; padding-bottom: 20px;" colspan="2">
<h2><span style="color: #666666;">Please complete this form if you have any technical issue.</span></h2>
</td>
</tr>
<tr style="padding-top: 40px;">
<td style="text-align: left;"><span style="color: #abaf6f;"><strong>First Name</strong>:*</span><input id="first1" name="first" type="text" /> <br /><br /> <span style="color: #abaf6f;"><strong>Last Name</strong>:*</span><input id="last1" name="last" type="text" /><br /><br /> <span style="color: #abaf6f; padding-right: 33px;"><strong>Email</strong>:</span><span style="color: #abaf6f;">*</span><input id="email1" name="email" type="text" /><br /><br /> <span style="color: #abaf6f;"><strong>Shipping Method:</strong><br /></span> <input name="shippingmethod" type="radio" value="prioritymail" /> Priority Mail <input name="shippingmethod" type="radio" value="store" /> In Store Pick up <br /> <input name="shippingmethod" type="radio" value="ground" /> Ground <input name="shippingmethod" type="radio" value="3day" /> 3 Day Select<br /><br /> <span style="color: #abaf6f;"><strong>Payment Method:</strong><br /></span> <input name="paymentmethod" type="radio" value="paypal" /> Paypal Method <input name="paymentmethod" type="radio" value="creditcard" /> Credit Card<br /> <strong><br /> <span style="color: #abaf6f;">If getting an error message, please explain the error:</span></strong><span style="color: #abaf6f;"> <br /></span> <textarea id="errormessage" cols="20" rows="2" name="errormessage"></textarea><br /><br /></td>
<td style="border-left: 1px solid grey; padding-left: 40px; text-align: left;"><span style="color: #abaf6f;"><strong>If using Paypal, Were you redirected successfully?</strong><br /></span> <input name="paypalredirect" type="radio" value="yes" /> Yes <input name="paypalredirect" type="radio" value="no" /> No<br /><br /> <span style="color: #abaf6f;"><strong>If using Credit Card, Did you get an error?</strong><br /></span> <input name="carderror" type="radio" value="yes" /> Yes <input name="carderror" type="radio" value="no" /> No<br /><br /> <span style="color: #abaf6f;"><strong>What happened after clicking place order? </strong><br /></span> <textarea id="placeorder1" cols="20" rows="2" name="placeorder"></textarea><br /><br /> <span style="color: #abaf6f;"><strong>Comments</strong>: <br /></span> <textarea id="comments1" cols="20" rows="2" name="strcomments"></textarea><br /><br /> <span style="color: #abaf6f;"><strong>Attach PrintScreen</strong>: <br /></span> <input name="strresume" type="file" />
<div style="height: 50px;"> </div>
</td>
</tr>
<tr>
<td style="padding-top: 20px;" colspan="2">( * ) indicates required fields</td>
</tr>
<tr>
<td style="text-align: center; padding-top: 20px;" colspan="2"><input class="button" name="submit" type="submit" value="Submit" /> <input class="button" name="reset" type="reset" value="Reset" /></td>
</tr>
</tbody>
</table>
</form>
</body></html>
PHP
<?php
echo $savestring;
//--------------------------paramaters--------------------------
// Subject of email sent to you.
$subject = 'prueba con uploads';
// Your email address. This is where the form information will be sent.
$emailadd = '[email protected]';
// Where to redirect after form is processed.
$url = 'http://www.pch-graphicdesign.com';
// Makes all fields required. If set to '1' no field can not be empty. If set to '0' any or all fields can be empty.
$req = '0';
$target_path = "http://www.pch-graphicdesign.com/php/uploads/";
$target_path = $target_path . basename( $_FILES['uploadedfile']['name']);
$text = "Results from form:\n\n";
$space = ' ';
$line = '
foreach ($_POST as $key => $value)
if ($req == '1')
if ($value == '')
{echo "$key is empty";die;}
$j = strlen($key);
if ($j >= 20)
{echo "Name of form element $key cannot be longer than 20 characters";die;}
$j = 20 - $j;
for ($i = 1; $i <= $j; $i++)
{$space .= ' ';}
$value = str_replace('\n', "$line", $value);
$conc = "{$key}:$space{$value}$line";
$text .= $conc;
$space = ' ';
mail($emailadd, $subject, $text, 'From: '.$emailadd.'');
echo '<META HTTP-EQUIV=Refresh CONTENT="0; URL='.$url.'">';
?>Sending a file as an attachment to an email involves setting the correct MIME type and headers. There's a brief tutorial here: http://webcheatsheet.com/php/send_email_text_html_attachment.php.
Also, you need to use the same name as in your form. In the script you have shown here, the name of the file field is strresume, but your processing script uses this: $_FILES['uploadedfile']['name']. It should be this: $_FILES['strresume']['name'] -
Can not add intercom button to phone template in cucm 8.5
For some reason I can not add the intercom button to phone template in cucm 8.5
Hi Matthew,
You may be seeing this (it's older info);
Intercom Support for Cisco Unified IP Phones
Cisco Unified IP Phone Model
SCCP
7931
7941
7941G-GE
7942
7945
7961
7961G-GE
7962
7965
7970
7971
7975
You can check your version;
Intercom Support for Cisco Unified IP Phones
The list of devices that support the Intercom feature varies per version and device pack.
Use the Cisco Unified Reporting application to generate a complete list of devices that support the Intercom feature for a particular release and device pack. To do so, follow these steps:
1. Start Cisco Unified Reporting by using any of the methods that follow.
The system uses the Cisco Tomcat service to authenticate users before allowing access to the web application. You can access the application
–by choosing Cisco Unified Reporting in the Navigation menu in Cisco Unified Communications Manager Administration and clicking Go.
–by choosing File > Cisco Unified Reporting at the Cisco Unified Real Time Monitoring Tool (RTMT) menu.
–by entering https://:8443/cucreports/ and then entering your authorized username and password.
2. Click System Reports in the navigation bar.
3. In the list of reports that displays in the left column, click the Unified CM Phone Feature List option.
4. Click the Generate a new report link to generate a new report, or click the Unified CM Phone Feature List link if a report already exists.
5. To generate a report of all devices that support Intercom, choose these settings from the respective drop-down list boxes and click the Submit button:
Product: All
Feature: Intercom
The List Features pane displays a list of all devices that support the Intercom feature. You can click on the Up and Down arrows next to the column headers (Product or Protocol) to sort the list.
Cheers!
Rob -
How to create backup file on itunes for ipod touch 4g game apps data? Is there a way to do it? I want to try an app on my friend's computer, but you can't add apps on another computer without having your own ipod's data being deleted. Thx for any help!
I want to know how to create a backup file (because I'm pretty new with itunes, and it's hard to use it for me still), how to store my app data/media/videos, etc. And how I can retrieve them back when I'm done with the app I tried on my friend's computer.
If anyone can help, it'd be great! Thank you so much!Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff.
Maybe you are looking for
-
Server 10.4.4, administrator account has "access account" disabled
Hi, I allowed a new tech to add users to our Xserve. Somehow he disabled the check box "access acount" in workgroup manager for the only administrator account. It now appears we cannot turn this back on! The end result is you can only access workgrou
-
How can I view and choose photos before importing from a digital camera?
Hey, I am using a Canon PowerShot A40 and I want to be able to (after I connect the camera and open iPhoto of course) view the pictures on the camera in iPhoto and choose individual images to import. I have 560 images, but I only want to import 3 (gr
-
Call multiple functions from same dll with call library function
hi, i am working on a project in wich we need to make a UI to read out a sensor network. the UI should be usable in any project, but every node needs a different piece of code depending on the type of sensor with wich it is equipt. so i need to be ab
-
How can i resolve the wifi problem with the ios 6.1.3 software on my iphone 4s?
my wifi keeps going on then off and its starting to **** me off......apple are aware of this and arent doing anything about it...if the issue isnt resolved soon, i will be leaving apple
-
Removing specific podcasts from iPod
Hello, I apologize if this is a simple question, but I'm not sure the best way to handle. I subscribe to many podcasts. I have it setup so that ALL podcasts are synced with my iPod. Once I have listened to a specific podcast, I will usually go into m