Can't boot standard Arch Kernel (root btrfs partition)

For a long time I using linux-mainline from AUR. Unfortunately Docker don't work on it. I tried to boot standard Arch kernel 3.17 from testing but i have got:
:: running early hook [udev]
Warning: /lib/modules/3.17.0-1-ARCH/modules.devname not found - ignoring
:: running hook [udev]
:: Triggering uevents..
Scanning for Btrfs filesystems
Waiting 10 seconds for device /dev/disk/by-uuid/(uuid)
ERROR: device 'UUID=(uuid)' not found. Skipping
ERROR: Unable to find root device 'UUID=(uuid)' .
I am using rEFInd to boot. This is config file of kernel:
"Boot with defaults" "root=UUID=3c5d33c2-1d2f-4c57-b226-ad7ecc51be00 rootfstype=btrfs rw"
"Boot to text mode" "root=UUID=3c5d33c2-1d2f-4c57-b226-ad7ecc51be00 rootfstype=btrfs rw systemd.unit=multi-user.target"
I tied to downgrade kernel to last stable version but it not helped.
Last edited by portals (2014-10-07 12:06:08)

I uncommented the testing repo and pacman -Syu. i tried downgrade to standard repo but it did not help. I have not used standard kernel for more then half year.

Similar Messages

Is the standard Arch kernel preemtible?

Hi,
in the process of reporting a bug I posted a uname -a which included the text PREEMPT and was then asked if I was "running with CONFIG_PREEMPT (Preemptible Kernel)". I am using the standard Arch kernel, is it a preemtible kernel?
Thanks, Jamie

[dieter@gibran ~]$ zgrep CONFIG_PREEMPT /proc/config.gz
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_TRACER is not set
Next!

[Solved] Can't boot into Arch after deleting some partitons

About 6 months ago I installed Arch on a machine that used to run Ubuntu. Had some trouble at the time getting to boot into Arch but somehow managed. Now eventually decided to delete the old Ubuntu partitons to free up some space using gparted. Arch partition number changed from sda12 to sda6.
On rebooting after deleting ubuntu partitions with gparted, I got an ubuntu splash screen and a whole lot of ubuntu boot options. Somehow these were all contained in my Arch's /boot/grub/menu.lst. Arch is all on one partition and no separate boot partition (which I had with Ubuntu - maybe I haven't deleted that and this is the problem?). Will need to check that out.
I can chroot into Arch and did the following -
grub> find /boot/grub/stage1
(hd0,5)
grub> root (hd0,5)
Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
Checking if "/boot/grub/e2fs_stage1_5" exists... yes
Running "embed /boot/grub/e2fs_stage1_5 (hd0)"... 16 sectors are embedded.
succeeded
Running "install /boot/grub/stage1 (hd0) (hd0)1+16 p (hd0,5)/boot/grub/stage2 /boot/grub/menu.lst"... succeed
ed
Done.
grub>
The Arch /boot/grub/menu.lst had a whole lot of ubuntu stuff in it but I edited to the following -
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,3)
title Arch uuid
#root (hd0,5)
uuid d15cf4f9-18ca-4ec5-95bc-db0f6f264736
kernel /boot/vmlinuz26 root=/dev/sda6 ro vga=775
intrd /boot/kernel26.img
title Arch hd
root (hd0,5)
kernel /boot/vmlinuz26 root=/dev/sda6
intrd /boot/kernel26.img
I have a bootinfo script which gives the following (from the chroot environment) -
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> No boot loader is installed in the MBR of /dev/sdb
sda1: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Mounting failed:
mount: /dev/sda5 already mounted or sda5 busy
sda6: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Mounting failed:
mount: /dev/sda5 already mounted or sda5 busy
mount: /dev/sda6 already mounted or sda6 busy
sda7: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sda3: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /etc/fstab
sda4: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs: /grub/menu.lst /grub/grub.cfg /grub/core.img
sdb1: _________________________________________________________________________
File system: xfs
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 750.2 GB, 750155292160 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465147055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 417,690 6,554,519 6,136,830 82 Linux swap / Solaris
/dev/sda2 25,414,954 1,465,144,064 1,439,729,111 5 Extended
/dev/sda5 25,414,956 1,360,287,809 1,334,872,854 83 Linux
/dev/sda6 1,360,287,873 1,423,198,349 62,910,477 83 Linux
/dev/sda7 1,423,198,413 1,465,144,064 41,945,652 83 Linux
/dev/sda3 6,554,520 25,414,829 18,860,310 83 Linux
/dev/sda4 * 63 417,689 417,627 83 Linux
Drive: sdb ___________________ _____________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start End Size Id System
/dev/sdb1 2,048 1,953,523,711 1,953,521,664 83 Linux
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 2a95d85a-45fe-4584-88dd-0ee20e651ec5 swap
/dev/sda2: PTTYPE="dos" PART_ENTRY_SCHEME="dos" PART_ENTRY_TYPE="0x5" PART_ENTRY_NUMBER="2"
/dev/sda3 32495e1a-227c-4d23-9f63-b1319def0dd9 ext3
/dev/sda4 d6dc69b0-967d-4886-b62d-8c0d6be06b41 ext3
/dev/sda5 37971286-b8d3-4a1b-9f94-4008288fed6d ext3 data
/dev/sda6 d15cf4f9-18ca-4ec5-95bc-db0f6f264736 ext3 30GB-02
/dev/sda7 eb736131-b558-4404-9b83-7f1e6d9e76ae ext3 var
/dev/sda: PTTYPE="dos"
/dev/sdb1 0e83045d-a0bd-4d36-b61d-bdb905130dc2 xfs 1TB-04
/dev/sdb: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda12 / ext3 (rw,commit=0)
=============================== sda3/etc/fstab: ===============================
# /etc/fstab: static file system information.
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda1 = swap
/dev/sda1 none swap sw 0 0
# /dev/sda3 = root
#UUID=32495e1a-227c-4d23-9f63-b1319def0dd9
/dev/sda3 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda4 = boot
# UUID=d6dc69b0-967d-4886-b62d-8c0d6be06b41
/dev/sda4 /boot ext3 relatime 0 2
# /dev/sda5 = home
# UUID=670eee83-0a3e-429c-863f-b9ecced9f97e
/dev/sda5 /home ext3 relatime 0 2
#/dev/sda6
#UUID=37971286-b8d3-4a1b-9f94-4008288fed6d
/dev/sda6 /home/ben/Data ext3 defaults,relatime 0 0
# /dev/sda7
# UUID=fdb14ca4-d71d-489f-a00e-6e608770674c
/dev/sda7 /var ext3 relatime 0 2
# /dev/sda8
/dev/sda8 /opt ext3 relatime 0 2
# /dev/sda10 - Arch
/dev/sda10 /mnt/arch ext3 relatime 0 2
# Not sure what this is doing here
# Have commented it out - May be the reason why xbmc and mythtv were crashing on dvd insert and play
# /dev/hda /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
# /dev/sde1
# uuid appears to be 644406B3570C1846 -> ../../sde1
#/dev/sde1 /home/ben/Data/TVRecordings-1TB01 xfs defaults,relatime 0 0
#1TB-01
UUID=76f3823a-81dc-45c9-a0b7-2bc6c3beb2f8 /media/1TB-01 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
d defaults, relatime
# 1TB-02
UUID=59cbf7a1-7008-40d0-96ed-c6f231823d4f /media/1TB-02 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
d defaults, relatime
# 1TB-03
UUID=0e936800-3c53-4b87-abc8-19be0ffca7f9 /media/1TB-03 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
d defaults, relatime
# 750GB-02 ext3 Partition
# UUID giving problems, trying with dev
# UUID=c23b9c9a-66fc-4256-9211-73156c1ac64a /media/750GB-02_ext3 ext3 defaults,relatime 0 0
/dev/sde2 /media/750GB-02_ext3 ext3 defaults,relatime 0 0
============================= sda4/grub/menu.lst: =============================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,3)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04.1 LTS, kernel 2.6.32-26-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-26-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-26-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-26-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-24-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-24-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-24-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-24-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-23-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-23-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-23-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-23-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-22-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-22-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-22-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-22-generic
title Ubuntu 10.04.1 LTS, memtest86+
root (hd0,3)
kernel /memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
============================= sda4/grub/grub.cfg: =============================
# DO NOT EDIT THIS FILE
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 32495e1a-227c-4d23-9f63-b1319def0dd9
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
set locale_dir=($root)/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-26-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-26-generic
menuentry 'Ubuntu, with Linux 2.6.32-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-26-generic ...'
linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-26-generic
menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-24-generic
menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-24-generic ...'
linux /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-24-generic
menuentry 'Ubuntu, with Linux 2.6.32-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-23-generic
menuentry 'Ubuntu, with Linux 2.6.32-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-23-generic ...'
linux /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-23-generic
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-22-generic
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-22-generic ...'
linux /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-22-generic
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux16 /memtest86+.bin
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux16 /memtest86+.bin console=ttyS0,115200n8
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Arch Linux (on /dev/sda10)" {
insmod ext2
set root='(hd0,10)'
search --no-floppy --fs-uuid --set 26851879-58d1-4d65-90b4-e0845fe1176c
linux /boot/vmlinuz26 root=/dev/sda10 ro
initrd /boot/kernel26.img
menuentry "Arch Linux Fallback (on /dev/sda10)" {
insmod ext2
set root='(hd0,10)'
search --no-floppy --fs-uuid --set 26851879-58d1-4d65-90b4-e0845fe1176c
linux /boot/vmlinuz26 root=/dev/sda10 ro
initrd /boot/kernel26-fallback.img
#### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
# From Arch grub menu.lst
# (0) Arch Linux
#title Arch Linux [/boot/vmlinuz26]
#root (hd0,0)
#kernel /vmlinuz26 root=/dev/sda3 ro
#initrd /kernel26.img
#Note: With a separate boot partition, omit /boot from the path, (i.e. type set prefix=(hdX,Y)/grub and insmod
(hdX,Y)/grub/linux.mod).
#This introduces the "linux" and "initrd" commands, which should be familiar (see #Configuration).
#An example, booting Arch Linux:
#set root=(hd0,5)
#linux /boot/vmlinuz26 root=/dev/sda5
#initrd /boot/kernel26.img
#boot
###menuentry "Arch1" {
###insmod ext2
###set root='(hd0,10)'
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
PARTITION
#linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
UBUNTU THIS IS THE ROOT PARTITION
#initrd /initrd.img-2.6.32-26-generic
###search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UU
ID
###linux /boot/vmlinuz-26 root=635d7d02-3f5b-4af6-9c74-16b2af8cc7fd ro quiet splash # ARCH'S ROOT UUID
###initrd /boot/kernel26.img
# /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
###menuentry "Arch2" {
###insmod ext2
###set root='(hd0,4)' #= TRYING UBUNTU'S BOOT
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
PARTITION
#linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
UBUNTU THIS IS THE ROOT PARTITION
#initrd /initrd.img-2.6.32-26-generic
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UUID
###linux /boot/vmlinuz-26 root=/dev/sda10 ro quiet splash # TRYING ARCH'S ROOT DEVICE FORMAT
###initrd /boot/kernel26.img
# /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
###menuentry "Arch3" {
###insmod ext2
###set root='(hd0,10)' #= TRYING UBUNTU'S BOOT IN HD FORMAT
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
PARTITION
#linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
UBUNTU THIS IS THE ROOT PARTITION
#initrd /initrd.img-2.6.32-26-generic
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UUID
###linux /boot/vmlinuz-26 root=/dev/sda10 ro quiet splash # TRYING ARCH'S ROOT DEVICE FORMAT
###initrd /boot/kernel26.img
# /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
### END /etc/grub.d/40_custom ###
=================== sda4: Location of files loaded by Grub: ===================
.0GB: grub/core.img
.0GB: grub/grub.cfg
.0GB: grub/menu.lst
.0GB: grub/stage2
.0GB: initrd.img-2.6.32-22-generic
.0GB: initrd.img-2.6.32-23-generic
.1GB: initrd.img-2.6.32-24-generic
.1GB: initrd.img-2.6.32-26-generic
.0GB: vmlinuz26
.0GB: vmlinuz-2.6.32-22-generic
.0GB: vmlinuz-2.6.32-23-generic
.1GB: vmlinuz-2.6.32-24-generic
.0GB: vmlinuz-2.6.32-26-generic
=============================== StdErr Messages: ===============================
No volume groups found
mdadm: No arrays found in config file or automatically
[/quote]
Output of fdisk -l from chroot is -
[quote]Disk /dev/sda: 750.2 GB, 750155292160 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465147055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000b084
Device Boot Start End Blocks Id System
/dev/sda1 417690 6554519 3068415 82 Linux swap / Solaris
/dev/sda2 25414954 1465144064 719864555+ 5 Extended
/dev/sda3 6554520 25414829 9430155 83 Linux
/dev/sda4 * 63 417689 208813+ 83 Linux
/dev/sda5 25414956 1360287809 667436427 83 Linux
/dev/sda6 1360287873 1423198349 31455238+ 83 Linux
/dev/sda7 1423198413 1465144064 20972826 83 Linux
Partition table entries are not in disk order
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00025bd3
Device Boot Start End Blocks Id System
/dev/sdb1 2048 1953523711 976760832 83 Linux
I need to post this now and come back from a different machine to note the error messages I am now getting on boot. ...
Note that when I boot and press esc to get the menu I get the menu.lst I created (in the second quote) above in /dev/sda6, ie the one with the Arch hd and uuid entries - so grub is looking there and finding that menu.lst, but something goes wrong after that.
OK. Have now booted the machine and after pressing esc and selecting the uuid entry (the same thing happens with the hd entry) I get a whole lot of stuff, but what seems relevant is (typing it out) -
List of all partitions:
No filesystem could mount root, tried:
Kernel panic - not syncing: VS: Unable to mount root fs on unknown-block(0,0)
Pid: 1, comm: swapper Not tainted 2.6.39-Arch #1
If anyone can help I'd really appreciate it. This is my MythTV machine so the WAF is about to take a big dive!
If I could just install grub to the MBR as if this was a new installation of Arch that would be great.
I am really lost as to what is going on, which I'm sure is evident.
Thanks a lot
belbo
Last edited by belbo (2011-08-12 13:31:23)

Hi. Unfortunately that didn't help.
So next, based on this post https://wiki.archlinux.org/index.php/Ke … el_version I chrooted into Arch and (a) rolled back and (b) reinstalled my kernel but that didn't help either. I suspected it wouldn't because the kernel was working fine before I deleted the partitions in question.
[2011-08-08 23:32] ==> Image generation successful
[2011-08-08 23:32] upgraded kernel26 (2.6.39.3-1 -> 2.6.39.3-1)
I then did a pacman -Suy and the linux package has now replaced kernel26. ( See this wiki entry http://www.archlinux.org/news/changes-t … filenames/). I didn't change anything in menu.lst owing to this and it seems there is no need to. Unfortunately this hasn't helped either - still getting the kernel panic.
Pacman.log relating to the new kernel package below -
[2011-08-09 00:22] Running 'pacman -Suy'
[2011-08-09 00:22] synchronizing package lists
[2011-08-09 00:23] starting full system upgrade
[2011-08-09 00:23] Running 'pacman -Suy'
[2011-08-09 00:23] synchronizing package lists
[2011-08-09 00:23] starting full system upgrade
[2011-08-09 00:26] removed python-mygpoclient (1.5-1)
[2011-08-09 00:26] removed kernel26 (2.6.39.3-1)
[2011-08-09 00:26] warning: /boot/grub/menu.lst installed as /boot/grub/menu.lst.pacnew
[2011-08-09 00:26] upgraded grub (0.97-17 -> 0.97-19)
[2011-08-09 00:26] upgraded icu (4.8-1 -> 4.8.1-1)
[2011-08-09 00:26] upgraded linux-firmware (20110512-2 -> 20110727-1)
[2011-08-09 00:26] >>> Updating module dependencies. Please wait ...
[2011-08-09 00:26] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-08-09 00:26] ==> Building image from preset: 'default'
[2011-08-09 00:26] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2011-08-09 00:26] ==> Starting build: 3.0-ARCH
[2011-08-09 00:26] -> Parsing hook: [base]
[2011-08-09 00:26] -> Parsing hook: [udev]
[2011-08-09 00:26] -> Parsing hook: [autodetect]
[2011-08-09 00:26] -> Parsing hook: [pata]
[2011-08-09 00:26] -> Parsing hook: [scsi]
[2011-08-09 00:26] -> Parsing hook: [sata]
[2011-08-09 00:26] -> Parsing hook: [filesystems]
[2011-08-09 00:26] -> Parsing hook: [usbinput]
[2011-08-09 00:26] ==> Generating module dependencies
[2011-08-09 00:26] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2011-08-09 00:26] 7079 blocks
[2011-08-09 00:26] ==> Image generation successful
[2011-08-09 00:26] ==> Building image from preset: 'fallback'
[2011-08-09 00:26] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2011-08-09 00:26] ==> Starting build: 3.0-ARCH
[2011-08-09 00:26] -> Parsing hook: [base]
[2011-08-09 00:26] -> Parsing hook: [udev]
[2011-08-09 00:26] -> Parsing hook: [pata]
[2011-08-09 00:26] -> Parsing hook: [scsi]
[2011-08-09 00:26] -> Parsing hook: [sata]
[2011-08-09 00:26] -> Parsing hook: [filesystems]
[2011-08-09 00:26] -> Parsing hook: [usbinput]
[2011-08-09 00:26] ==> Generating module dependencies
[2011-08-09 00:26] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2011-08-09 00:26] 23360 blocks
[2011-08-09 00:26] ==> Image generation successful
[2011-08-09 00:26] installed linux (3.0.1-1)
I don't think I've mentioned that my old menu.lst seems to have disappeared and so must have been on one of the partitions that were deleted. I did have 2 Arch installations when I was setting things up months ago and that menu.lst may have been on the other partition but pointing to this partiton's kernel for booting. Presumably that's possible since this partiton is definitely the one I have been using for the last several months (confirmed by log and other files updated in the last few days etc). Even so, I suppose that probably wouldn't be relevant to this issue, since grub is finding the menu.lst on this partition when it boots so it is looking in the intended place now.
It seems I'm at a bit of a dead end. It seems these kernel panics are usually because there is something wrong with the kernel - which there wasn't with mine (and presumably the kernel in the new linux package is fine) or there is a typo in menu.lst (I can't see one and nobody has pointed one out yet) or menu.lst is pointing to the wrong partition (mine is pointing to the same partition and /boot directory that is found by grub - which is where my boot image is located - so it seems to be correct). I have nevertheless tried editing the menu.lst entry when booting to boot from different partitions but so far that hasn't worked either.
If anybody has other ideas I'd really appreciate it.
If not, some suggestions on re-installing would also be appreciated. I have a recent tar archive of the partition, but presumably reinstalling that wouldn't be of much use since it would just put back what is currently there. I guess that I need to format the partition, create a separate boot partition, do a fresh install of Arch into the formatted partition (and with boot in the new boot partition). And then restore my tar backup (excluding the boot directory) into the formatted partition?
Any assistance greatly appreciated.
Thanks
belbo
Last edited by belbo (2011-08-08 23:17:49)

[SOLVED]Ubuntu 11.10 broke grub2, can't boot into arch

Hi, I'm having a little issue with grub2 at the moment, I have Arch installed on seperate /home / and /boot partitions, I installed Ubuntu using the "alongside" option in the installer which has added an option to boot into Arch on the grub bootup screen. However when I boot up into arch I get the follow message:
Waiting 10 seconds for device /dev/hda3
[ numbers] usb 1=-4.2: device descriptor read/all, error -3
ERROR: Unable to find root device '/dev/hda3' .
You are being dropped to a recovery shell
Then I am promptly dropped into a recovery shell.
My root device should be at /dev/sda5, not quite sure what's happened there.
Any ideas on how to get this fixed? I think ubuntu has /boot on it's own parition, along with the rest of /.
Last edited by will.price94 (2012-02-26 12:11:04)

DSpider wrote:
hda is an IDE drive.
sda is a SCSI drive (SATA).
Do you have both on your system? Or is Ubuntu getting it wrong?
# sudo fdisk -l
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x568055d5
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sda2 206848 146802687 73297920 7 HPFS/NTFS/exFAT
/dev/sda3 146802688 148828159 1012736 83 Linux
/dev/sda4 148830206 1465147391 658158593 f W95 Ext'd (LBA)
/dev/sda5 148830208 344139775 97654784 83 Linux
/dev/sda6 344141824 781250559 218554368 83 Linux
/dev/sda7 781252608 1257244671 237996032 83 Linux
/dev/sda8 1257246720 1456762879 99758080 83 Linux
/dev/sda9 1456764928 1465147391 4191232 82 Linux swap / Solaris
Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0004c41c
Device Boot Start End Blocks Id System
/dev/sdb1 2048 2930276351 1465137152 83 Linux
Disk /dev/sdc: 1500.3 GB, 1500299395072 bytes
255 heads, 63 sectors/track, 182401 cylinders, total 2930272256 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0005d269
Device Boot Start End Blocks Id System
/dev/sdc1 2048 2930272255 1465135104 83 Linux
Ubuntu is getting it wrong, I have 2 SATA drives and an external USB drive.

[SOLVED] Where can I browse the Arch kernel source?

I tried to look for the kernel source code under /usr/src/linux-3.4.9-1-ARCH but there's only a binary file (an image?) vmlinuz in there. I wanted to look for drivers concerning usb for fun, but I can't seem to find the excact location of the kernel source code.
Last edited by burninate (2012-08-25 09:48:56)

Sure you can, but it'll pretty much be the same as if you downloaded the code from kernel.org. You can use makepkg and the ABS to easily get the source and Arch's patch(es) on your computer.
Edit: If you have linux-headers installed, then the path HalosGhost refers to has the headers, not the full source
Last edited by SidK (2012-08-22 19:29:08)

Can't boot into Windows after splitting Mac partition with Disk Utility

Hi everyone,
I installed Windows 8 with BOOTCAMP, creating a large 871 GB partition with a smaller 127 GB partition for Windows. After installing Windows, I then went back to Disk Utility to shrink the Mac partition and add two new partitions, one for storage and another blank, hoping to use it to install Linux into one day.
I did that, and now Windows doesn't boot. A Windows blue screen tells me I need to use the Windows DVD to repair it.
I tried to use Disk Utility to delete the two new partitions I made and grow the Mac partition back to the max size of 871 GB. But it doesn't let me do this. The Disk Utility log doesn't report an error and thinks it worked but the partition stays the same size. However if I make the partition a little smaller, like 870 GB then it works. I'm wondering if the Recovery partition is hiding there and preventing me from fully expanding the Mac partition.
What can I do?
Here's what I get if I type in sudo gpt -r -vv show disk0:
Code:
gpt show: disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168 gpt show: disk0: Suspicious MBR at sector 0 gpt show: disk0: Pri GPT at sector 1 gpt show: disk0: Sec GPT at sector 1953525167 start        size index contents 0           1         MBR 1           1         Pri GPT header 2          32         Pri GPT table 34           6 40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B 409640 1701278816      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC 1701688456     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC 1702957992     1846360 1704804352   248002560      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 1952806912      718223 1953525135          32         Sec GPT table 1953525167           1         Sec GPT header
Here's what I get if I type sudo fdisk /dev/rdisk0:
Code:
Disk: /dev/rdisk0     geometry: 121601/255/63 [1953525168 sectors] Signature: 0xAA55 Starting       Ending #: id cyl hd sec - cyl hd sec [     start -       size] ------------------------------------------------------------------------ 1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID> 2: AF 1023 254 63 - 1023 254 63 [    409640 - 1701278816] HFS+ 3: AB 1023 254 63 - 1023 254 63 [1701688456 -    1269536] Darwin Boot *4: 07 1023 254 63 - 1023 254 63 [1704804352 - 248002560] HPFS/QNX/AUX
Here's what I get with gdisk:
Code:
Disk /dev/rdisk0: 1953525168 sectors, 931.5 GiB Logical sector size: 512 bytes Disk identifier (GUID): 6075110F-7CEF-4604-85EE-6231B850E2AE Partition table holds up to 128 entries First usable sector is 34, last usable sector is 1953525134 Partitions will be aligned on 8-sector boundaries Total free space is 2564589 sectors (1.2 GiB) Number Start (sector)    End (sector) Size       Code Name 1              40          409639   200.0 MiB   EF00 EFI System Partition 2          409640      1701688455   811.2 GiB   AF00 1 TB APPLE HDD HTS54101 3      1701688456      1702957991   619.9 MiB   AB00 Recovery HD 4      1704804352      1952806911   118.3 GiB   0700 BOOTCAMP

Okay, the code I typed didn't display properly in the forum. Let me try again.
Here's what I get when I type
sudo gpt -r -vv show disk0:
gpt show: disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 1953525167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1701278816      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1701688456     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1702957992     1846360
1704804352   248002560      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1952806912      718223
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header
And when I type fdisk /dev/rdisk0 I get:
Disk: /dev/rdisk0          geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 1701278816] HFS+
3: AB 1023 254 63 - 1023 254 63 [1701688456 -    1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [1704804352 - 248002560] HPFS/QNX/AUX
Kappy,
I can boot into OS X just fine so if possible, I'd like to avoid reformatting everything. If you know of a way I can add more than 2 partitions with OS X and Boot Camp, please let me know. As far as I know, rEFInd can recognize more than two partitions, but I don't think it can edit partitions on a GPT / hybrid MBR system. Or am I wrong?

Can I boot into Windows if it is partitioned on a second hard drive?

I want to put my 2009 MBP hard drive into a 2012 MBP by replacing the optical drive with the 2009 hard drive in a caddy. The 2009 has Windows partitioned on it already through bootcamp.
Will I be able to boot into windows through the second drive or will I have to bootcamp the new 2012 drive with Windows?

OK Cool. I think I will try that. Thanks for the tip. I appreciate it.

[Solved] Can't boot arch after merge linux partition

Before this i have issue with my partition table, but i can fix it with testdisk.
After that, i merge all my linux partition into one. I mean like this
Before i merge my linux partition:
/ >> /dev/sda3
/var >> /dev/sda4
swapfile >> /dev/sda6
/home >> /dev/sda7
My new partition
/ >> /dev/sda3
swapfile >> /dev/sda6
i can't boot my arch after i backup and moved my home and var directory to /dev/sda3 with livecd.
How to fix this issue?
Last edited by nizar (2009-03-28 04:18:29)

Solved by myself! LOL
I edit and remove /dev/sda4 and /dev/sda7 in my /etc/fstab file with livecd.
Now, arch boot without /dev/sda4 and /dev/sda7

Can't boot into Mac OS after Windows install via Bootcamp

Hello.
Last night I installed Windows 7 on my Macbook Pro early 2011 via Bootcamp.After some major complications I was able to finally install Windows 7 and boot into it. Now I can't boot back into my "Macintosh HD" partition, it shows a no entry sign.
Hard Disk : 320GB Internal Sata
Partitions : 3 -> Mac, Bootcamp and 10.8 Recovery Partition
The good part is that I can still access the Mac OS partition in Windows and Windows is working perfectly fine. As a matter of fact right now I'm on the bootcamped windows.
I have a full time machine backup but still I am looking for a way to solve this without formatting the HDD.
Things I have tried:
1. Resetting NVRAM and PRAM
2. Booting into 10.8 recovery partition and running DU.
SMART Status : Verified
"Macintosh HD" grayed and Not Mounted
Successful Verify Permissions (Twice)
Is there a way to solve this? Though the Mountain Lion partition shows when I press the Alt/option key on startup but I can't somehow boot into it.
Thanks

Your problem is OS X is refusing to boot.
There is still a bootable volume on the Macintosh HD partition, it's just not working.
You can #8 Reinstall Just OS X while command r booted from the Recovery partition, as long as you don't use Disk Utility to erase the Macintosh HD partition, your files and programs remain.
Hook the computer via Ethernet cable to a router (or modem, power reset required) with a fast relaible internet connection, you will need your AppleID and password to reinstall OS X.
Step by Step to fix your Mac

Can't Boot a 1.83 Dual Core Mini from UBS 2.0?

Hi All,
I have a 1.83 Dual Core Intel Mac Mini and I am trying to Boot the machine from a USB 2.0 Drive.
Startup Disk sees it and lets me select it, but everytime I try to start from the USB Drive, the machine just automatically bypasses the USB Drive and always boots from the Internal Drive.
Someone mentioned that Intl Mini's *CAN ONLY BOOT* from drives formatted as "GUID PARTITION TABLE", is that correct? If so, I find that curious, because the same external drive was cloaned from and can boot an 2.26 Intel Dual Core 15 inch Mac Pro, so I figured that it should be able to boot a similar vintage Intel Machine.
Just for information: when you hold down the "option" key at startup, the USB drive (formatted as "Apple Partition Map") is not even presented as a Startup Option.
Any help would be greatly appreciated!!
Thanks
Kalagan

Hi Kay,
Thanks for the info, but one curious thing has come out of this. When my external drive was connected to the Intel Mac Pro via Firewire 400, I could boot the Laptop from the external Firewire Drive even though it was formatted as "Apple Partition Map", but the same drive connected to the same computer would not boot the machine when connected via USB 2.0.
So, it looks like Intel Macs don't require GUID Partitioning to boot, if you are connected via Firewire, but they do need the GUID Partitioning scheme when you are trying to Boot from a USB 2.0 drive??
Interesting??
Thanks
Kalagan

Copied my Arch root partition to a new one but I can't boot [SOLVED]

I booted to my arch live cd and copied my Arch / partition (/dev/sda1) to an empty partition (/dev/sda9) via a cp -a command. The new partition should now contains an exact copy of my old root partition. I also modified the /etc/fstab in the new partition to reflect the new block device for the root filesystem. I also added a line to my menu.lst to boot it. I didn't do something right because I get a kernel panic when grub boots into the new partition.
menu.lst entry:
title Arch Testing
root (hd0,8)
kernel /boot/vmlinuz26 root=/dev/sda9 ro quiet vga=773 acpi_enforce_resources=lax vga=773
initrd /boot/kernel26.img
Ideas?
EDIT: Just read this wiki page
The fix as root:
mount /dev/sda9 /mnt
cd /mnt/dev
rm console ; mknod -m 600 console c 5 1
rm null ; mknod -m 666 null c 1 3
rm zero ; mknod -m 666 zero c 1 5
mount -o bind /dev /mnt/dev
mount -t proc none /mnt/proc
mount -o bind /sys /mnt/sys
cd /
chroot /mnt /bin/bash
mkinitcpio -p kernel26
Last edited by graysky (2009-12-05 15:14:01)

Since you can't delete Apple IDs and having multiple Apple IDs can cause confusion, what you may want to do is rename your existing Apple ID to the new email (desired Apple ID). That would in effect do what you want, get rid of the old and give you the new.
See "Apple ID: Changing your Apple ID"
ivan

Can't boot Arch from external HDD

Hi, well first off this is not my first Arch Linux installation, I'm using Arch for a little over a year now (coming from slack). But this is my first attempt to have Arch on an external HDD.
Alrighty, the situation is as follows: A rather new computer (supports booting from USB devices and the bios is set to boot from removable devices first) with a built in HDD and an external HDD that's connected to that computer via USB.
What I did: I connected the external HDD to the computer and booted off a 2008.6 Overlord core-CD.
Arch-Live recognized the internal HDD as sda and the external HDD as sdb.
I partitioned the external HDD using cfdisk and ran mkfs.ext3 on it (I didn't use any switches with that).
I started the installer, set my mount points (I should mention I'm not gonna use a swap partition here), installed the packages, well just went through the installation routine and installed grub in the MBR of sdb (the external HDD).
Then I rebooted. And this is what doesn't work: When I boot that computer with the external HDD connected the computer completely hangs right before grub would come up. It freezes completely, ctrl+alt+del doesn't work, I need to use the powerswitch to reboot the computer.
So I put the Arch-CD back in the CD drive trying to boot into my Arch System on the external HDD. So I started typing:
root (hd1,0)
kernel /boot/vmlinuz26 root=/dev/sdb1 ro vga=773
initrd /boot/kernel26.img
When I try to boot off that grub tells me that there is no such device as hd1,0. The funny thing is, that the auto copmletion in grub works for the kernel /boot/vmlinuz26 but it doesn't for the device /dev/sdb1, in fact even root=/de<tab> returns a "unrecognized string" message.
So this is what I did and I can't boot off my external HDD, neither can I boot into my system on the external hdd from the cdrom.
What am I missing here?

The harddrive you boot from is in my experience always hd0. Could this mean your external disc is hd2?
Have you tried chainloading from the installer cd to your external disc?

[SOLVED]Can't boot Arch after installation-grub use wrong uuid in bios

Hello I would like to ask for Your help and say hello. I'm new here.
I have one big problem with Arch. Can't boot it after base installation. The same problem with Arch, that was mentioned in this topic:
https://bbs.archlinux.org/viewtopic.php … 7#p1294597
I have the same problem and the same error:
No such Device: ad4103fa-d940-47ca-8506-301d8071d467.
Loading Linux core repo kernel ...
error: no such partition.
Loading initial ramdisk ...
error: you need to load the kernel first.
Press any key to continue..._
I'm new here, and with Arch, could you explain me how to fix it? I tried the solution given in the link above, several times but with each time i have errors and warnings from the post 1 in mentioned topic. I installed my Arch from usb thumb drive. Maybe this is something to do with it? Also, my hard drive that Arch is installed on is being connected to a "raid card" named Adaptec, but during installation my disk is being found so i think that drivers is present and works ok, so it is not related to this, also there is no raid present, i use it only as a mean to connect to motherboard because there is not enough sata port, and because:
https://bugs.archlinux.org/task/35626
he wrote that this error is also on virtualbox, so it is not my fault and Adaptec related issue.
I haven't tried this yet:
Sotanaht,
I had the exact same problem as you, but I was able to fix it by replacing the bad grub.cfg file with the grub.conf file found in the same directory. If you try this do not forget to back up your original file (just in-case smile)
because i don't know much about it, don't want to destroy data on my hard disks or to destroy my other distros (i use Ubuntu with derrativates such as Mint, Kubntu, Lubuntu, Xubuntu, and Slackware 13.37 and 14.00).
If you could explain it in details i would be really happy.
I could post something about my setup, please write what. My computer is:
-AMD X4 PII 955 runinng at 3.2GHz
-4GB DDR2 runinng at base clock (800 if i remember correctly)
-about 7 hard drive disk connected to a sata ports, one adaptec drive that i mentioned above and one dvd-rom
-nvidia GTX260
-850W PSU Chieftec
Last edited by firekage (2013-07-02 08:11:29)

Yes, of course. I did it several times with
grub-mkconfig -o /boot/grub/grub.cfg
and the result is always the same - Error posted above.
Here is my grub.cfg file:
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-ad4103fa-d940-47ca-8506-301d8071d467' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-ad4103fa-d940-47ca-8506-301d8071d467' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
It is wrong, the root partition is different than in this, we can see that this grub leads to wrong root partition, i posted my root partition at the bottom from /etc/fstab. I don't know how to fix it - i'm not familiar with the dos names (hd 0,5 and so on).
Here is my /etc/fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sdb2
UUID=59603166-5d8a-4aaf-81f7-5a822fd630e5 / ext4 rw,relatime,data=ordered 0 1
# /dev/sdb1
UUID=20028674-d7e8-4bf4-8551-64f133641962 none swap defaults 0 0
(END)
Last edited by firekage (2013-07-01 06:26:59)

[Solved] Can't boot, root device not found

I recently performed an update of udev and my kernel and after this I am unable to boot the normal kernel or the fallback. When I try I get this error:
ERROR: Unable to find root device '/dev/disk/by-uid/03619a2f-908f-4724-ba4b-1fb3985e382b' You are being dropped to a recovery shell Type 'exit' to try and continue booting sh: can't access tty; job control turned off
Typing exit results in me dropping to another shell and if done repeatedly a kernel panic. I attempted to boot via the grub console using the sda device block but I came up with the same error. When I look in /dev through the recovery console that comes up the sda* blocks aren't present.
I need to know if there is a way to do this without entirely reformatting my system, I also don't have easy access to another computer but I have an android phone. Any assistance is greatly appreciated.
Last edited by Surry (2012-03-20 00:06:12)

This has been solved.
For anybody's reference:
From the recovery shell I had to load the modules ahci and sd_mod and that got the sda* to appear in /dev. After that I had to mount /dev/sda3 (my root partition) under /root and /new_root and then enter 'exit' to continue booting.
Pretty much:
modprobe ahci
modprobe sd_mod
mount /dev/sda3 /root
mount /dev/sda3 /new_root
exit

Can't boot arch on macbook mid 2012

hello
i tried to boot arch from 2012.08.04 and archboot iso through USB but kernel panic occurs.
has a similar thread: https://bbs.archlinux.org/viewtopic.php?id=144089&p=1
Janhouse said need to add noapic to kernel line but i dont know where to add it !
so my question here is : how can i add noapic to kernel line?
sory, this is stupid ques, i googling and it says press 'E' then press 'B' blah blah... but it doesn't work. (i also tried to edit iso file but i can't locate grub.conf or menu.list)
thanks so much!

Have you tried booting with the parameters listed here: http://wiki.archlinux.org/index.php/Mac … stallation

Can't boot standard Arch Kernel (root btrfs partition)

Similar Messages

Maybe you are looking for