Can't bring Network Name on line

Can't bring Network Name on line
Cannot cannect to configuration database error was shown when trying to access site.
Checking I found Suddenly clustering isn't function. When I look at the dependency report, the Network Name is
offline but its IP address is online and pingable.
The event viewer shows several of the following:
==============
Event ID: 1205; The Cluster service failed to bring clustered service or
application 'Cluster Group' completely online or offline. One or more
resources may be in a failed state. This may impact the availability of the
clustered service or application.
==================
Event ID: 1069; Cluster resource 'Cluster Name' in clustered service or
application 'Cluster Group' failed.
==================
Event ID: 1207; Cluster network name resource 'printserver' cannot be
brought online. The computer object associated with the resource could not be
updated in domain 'domainname.com' for the following reason:
Unable to obtain the Primary Cluster Name Identity token.
The text for the associated error code is: An attempt has been made to
operate on an impersonation token by a thread that is not currently
impersonating a client.
The cluster identity 'SPSERVERCLUS$' may lack permissions required to
update the object. Please work with your domain administrator to ensure that
the cluster identity can update computer objects in the domain.
==========
Event ID: 1205; The Cluster service failed to bring clustered service or
application 'Cluster Group' completely online or offline. One or more
resources may be in a failed state. This may impact the availability of the
clustered service or application.
Environment: Windows SQL Server 2008 R2.
Did any updates created and issue?
Checked DNS name is mapped to correct IP address.
AD has no expired credentials.
Surprisingly when turned 1 DB OFF, we can connect to site but still this error persist.
I've been googling this for a while, but haven't found a solution.
Please recommend the appropriate forum for this.I'd
appreciate any ideas. Thanks.
Thanks and Regards, Parth
Thanks and Regards, Parth

Hi, Actually we tried fixing many different ways but the thing which worked was Built-in recovery Processes. Computer object that represents the CNO was deleted, you will no longer be able to create the computer objects associated with cluster CAPs.
First, you must engage a Domain Administrator to recover the deleted computer object from the DeletedObjects container in Active Directory. Then, after the object has been restored and re-enabled, you execute the Repair Active Directory Object process in
the Failover Cluster Management snap-in.
there was a possibility that the cluster configuration file located in the %systemroot%\cluster subdirectory would become corrupted and then have to be replaced. In Failover Clusters, the self-healing capability can help. If the cluster service starts on
a node and the configuration database is corrupted, a minimal configuration template will be loaded using information contained in the HKLM\System\CCS\Services\ClusSvc\Parameters registry key. The node will attempt to join an already formed cluster and, if
this attempt is successful, a fresh copy of the cluster registry hive will be pushed to the node. If a node cannot join a cluster, the cluster service will be terminated.
Hope that can be helpful!
Thanks and Regards, Parth

Similar Messages

  • How to change the network name and line name on iPad 4?

    Could anybody help me how to fix this problem?
    Previously I used qb (a mobile network in Cambodia) for my iPad 4 (iOS 7.0.4 non-jailbreak) the network name is qb.
    The problem is that after I changed to use SMART (another mobile network in Cambodia) for this iPad the network name is still in QB and the Line name changed to SMART.
    I don't know how to fix it now.
    I have tried many methods as in restore through iTunes, reset network setting, reset all setting... but I still could not get the solutions.
    I do hope to get it fix through all your experience.
    Regards,
    Panharith

    Hi Anikesh
    using SU01..u can change the password but can't see the old password..
    Hope this helps, reward with points if it does...;-)
    Regards,
    Tejas

  • Hi, my wifi set up is Extreme, Express then iMac. All showing solid green status. Airport utility showing no connection tho? i can see network name and use homesharing too. why is it showing this?

    Hi, my wifi set up is Extreme, Express then iMac over 3 floors. All showing solid green status and iMac (showing full signal wireless). However, the Airport utility is showing no connection? I can see the network name and use homesharing too. why is it showing this??

    I dont follow the problem?
    By the way, i hope you have those all set on non-interfering frequencies. e.g.: 1,6,11
    Grant

  • Will changing Network name affect Time-capsule back up function

    I finally managed to set up my time capsule with Mac support help. I didn't realize until this morning that I didn't want my network name to be my full name. I think I can change the network name easily enough through the airport function. But will this screw up my Time Capsule's attempts to update my files? Do I need to go into Time Capsule and change the network somewhere, or is the program intuative and will do it automatically?

    Welcome to the discussions!
    Changing the network name will not affect your backups.
    You might want to reconfirm the setup for your backups as follows:
    Open System Preferences (gear icon on the dock)
    Open Time Machine
    Click Select Disk
    Click your Time Capsule disk to highlight it
    Click Use for Backups

  • Fetching network name from a mobile through MIDlet

    Hi All,
    Friends can we fetching network name from a mobile through Midlet programming ? I mean the network tower it currently used.
    if anyone has the concept about that then please help me about that.
    Thanks........
    Edited by: javalearner83 on Sep 26, 2007 4:58 AM

    sory to tell u that i dont know whether it is possible in j2me or not??
    but surely it is possible in Symbian c++
    in my company my collegue has worked in same application about which u are talking

  • Network names

    First time mac owner. First post on the forum.
    I just bought an iMac, and am integrating it into a network of primarily Windows XP computers, but I also have a NAS that is Mac/Windows compatible.
    The other computers register with my linksys wireless G router with their network names (using netbios?) but the mac not only doesn't register its name, but also cannot ping the other computers by name. However, if I browse the network, I can access files on the XP computers' shares by name. I would really like to access TCP/IP services on the other computers by name, rather than continuing to type in 192.168.1.whatever each time the other computer gets a new IP address.
    Also, if i can't make this work automatically, is there a host file that i can type the network names in?

    Is Bonjour something I need to look into? Can I load it on the PC's to allow the iMac to resolve their IP addresses by name?

  • Officejet 6500 forgetting network name and drops out all the time

    I just got an Officejet 6500 (non-wireless model)
    I can assign a network name to it and it works fine, until it's power-cycled. Then it has the original network name again and of course it won't work until it's installed again.
    Another problem that could probably be related is that even when I use the default network-name to add it as a network printer in Vista, connection seem to break and it won't print again until I install it over once again.
    I get the feeling that firmware is somewhat buggy on it. I don't expect such a device to use batteries to keep it's settings, so I think it's safe to rule out? 

    @Wifi-Guy: Yes, it's using an ethernet cable IP address always work. 
    I did some additional testing to find the exact reproducable error.
    (I have previously installed the HP software that came on the CD)
    1. I added the printer using the "Add new printer" wizard in Vista
    2. Print test page, works fine
    3. Turn off the Officejet 6500 on the power-button on the front panel (then the WSD Print Provider dissappears in Device Manager).
    4. Printer status now appear as "Offline"
    5. Turn on the Officejet 6500 again
    6. When WSD Print Provider again appears in Device Manager, printer status changes from "Offline" to "User intervention Required" and it's impossible to make it print again unless printer is deleted and added again.
    I was not able to find any useful information about this printer status using google.
    I just tried changing the network name. As I suspected, this also resets just by powercycling.
    Note: I'm using Vista x64. 
    Message Edited by odyssey on 06-16-2009 10:18 AM
    Message Edited by odyssey on 06-16-2009 10:19 AM

  • Network Name not showing up (scrolling) in Airport Menu during launch

    I know this is extremely trivial. I am having no problems connecting using AirPort Extreme Base Station and the AirPort Utility. However, sometimes when I connect via Airport I can see the network name scroll in the menu bar as the Signal Strength icon moves to the left. Yet, at other times, the network name is never shown in the menu bar. What causes this inconsistency??
    Thanks for any input.

    i assume your airport extreme base station (AEBS) is you main router and you want the airport express (AX) join the network provided by the AEBS.
    you could try this:
    unplug and re-plug the airport express (AX), then click on the airport icon in your menu bar. you should see something like "Apple network bj1234567" or similar (it may take a little while for it to show up). in order to set up the express, you will have to temporarily join its network ! you will get a message asking +do you really want to switch networks ?+ and you do want to do that.
    launch airport utility (AU). you should see the AX on the left. click on the icon of the AX once to highlight it and click continue. follow onscreen instructions and, when prompted, choose to +join an existing network+ and enter the required information for your network.
    any help ?

  • Anyway to "UN" Ken Burns stills globally or as default bringing in jpeg's?  New to iMovie. I have 3 titles that build.  First is logo, add prod't name second line, add date 3rd line.  They shift when dissolving between them. Title function NG for this.

    Anyway to "UN" Ken Burns stills globally or as default bringing in jpeg's?  New to iMovie. I have 3 titles that build.  First is logo, add prod't name second line, add date 3rd line.  They shift when dissolving between them. Title function NG for this.
    The people at the Apple store gave me a long, tedious workaround which is open Pages and bring in logo.  Export it as a PDF.  Open the PDF in Review and then "Save As" a jpg to the desktop and drag and drop into the imovie.  Even with this process, the text will sometimes shift.  When it works, it looks good, the logo comes up, then the second line fades in under it as part of the build and then the third line completes the graphic.  It would something this easy and straight forward would be easy. 
    HarveyV

    I did the work around for the titles/jpg's in this short video. 
    I'll try your fix on the next one.  I have 22 short 3-5 minute videos to produce
    and I'm on number 5.  This should save me a bunch of time. 
    It would appear that you know more than the guy at the Apple Store. 
    Thank goodness for on-line forums.
    I already tried fixing them individually as you suggested,
      by going the crop/fit route.  However, even then,
      the second in the series had always shifted. 
    The first and the third images lined up, but not number 2.. 
    So  I brought in all the images, (1, 2 and 3).  
    and then the 2nd image again and put it in the third position
    in the sequence on the time line. I deleted the "original" 2nd image.
    So I had 1, 3, then 2.  Then I dragged and dropped the correct number two
    into position two and it worked.  So what happens is that the
    client logo appears, then that stays put and the next line dissolves in
      and then the third dissolves in.  They are three separate titles, but they
    are aligned perfectly so that they build as I dissolve between them.
    I think the problem with the edit copy route would be that while
    I could edit/copy the logo, I couldn't position text through the
    iMovie text function exactly as it only gives you middle or bottom third etc.
      Each title with the product name is positioned individually depending on
    length and number of lines. By going through Pages, I can position the logo
    and the text exactly.  Also, some logos are horizontal, while others
    are square etc., so text positioning is crucial.Anyhow,
    I'll try the global approach for the next one and see how that works.
      Thanks very much for your insight and especially for your prompt reply.
    I trust you're inside on this gorgeous July 4th because you're
    making money on your computer. ;-)HarveyVOn 7/4/2011 3:57 PM, Apple Support Communities Updates wrote:
    > Apple Support Communities <https://discussions.apple.com/index.jspa>>>>       Re: Anyway to "UN" Ken Burns stills globally or as default>       bringing in jpeg's? New to iMovie. I have 3 titles that build.>       First is logo, add prod't name second line, add date 3rd line.>       They shift when dissolving between them. Title function NG for...>> created by AppleMan1958 > <https://discussions.apple.com/people/AppleMan1958> in /iMovie/ - View > the full discussion > <https://discussions.apple.com/message/15552380#15552380>> ------------------------------------------------------------------------>> I am baffled by what you are asking...but if you are asking how to > turn off the Ken Burns effect, you can do it for future photos you add > by going to File/Project Preferences and setting the default initial > photo placement to FIT or CROP rather than Ken Burns.>> For a global change on photos that are already in your project, pick a > photo. Open the Rotate, Crop, Ken Burns Tool. Select FIT or CROP.  > Exit the tool. Now select this same photo and EDIT/COPY.>> Now, EDIT/SELECT ALL.>> Finally, EDIT/PASTE ADJUSTMENTS.../CROP ADJUSTMENTS.

  • Failover Cluster Network Name Failed and Can't be Repaired

    I have an issue that seem to be a different problem than any others have encountered.
    I've scoured everything I can find and nothing has fixed my problem.
    The problem starts with the common problem of the cluster network name failing on my 2 node server 2012 file server cluster.  The computer object was still in AD and appeared to be fine so it was not the common problem of the object
    getting deleted somehow.  At the time, there was no other object with that name in the recycling bin, so I don't think it was mistakenly deleted and quickly recreated to cover any tracks, so to speak.
    Following one guide, I tried to find the registry key that corresponded with the GUID of the object, but neither node in the cluster had it in its registry (which may be part of the problem).
    Since it was in the failed state, I tried to do the repair on the object to no avail.
    We run a "locked down" DC environment so all computer objects have to be pre-provisioned.  They were all pre-provisioned successfully and successfully assigned during cluster creation.  The cluster was running with no issues for a month
    or so before this problem came up.
    When I do a repair on the object while taking diagnostic logs the following 4609 error appears:
    The action 'Repair' did not complete. - System.ApplicationException: An error occurred resetting the password for 'Cluster Name'. ---> System.ComponentModel.Win32Exception: Unknown error (0x80005000)
    There appears to be a corresponding 4771 error with a failure code 0x18 that comes from the security log of the DC that states there was a Kerberos pre-authentication failure for the cluster network name object (Domain\Clustername$)
    I believe this is what is causing the repair failure.  All the information I found related to security error 4771 was either a bad credentials given for a user account or the fix was to reconnect the computer to the domain.  I can't seem to find
    a way to do this with the cluster network name.  If there's a way please let me know.
    I've tried a number of things, like resetting the object, disabling it, deleting and creating a new object with the same name, deleting that new object and recovering the original, etc...
    Can anyone shed some light on what is going on and hopefully how to fix it other than rebuilding the cluster?  I'm quite close to just tearing it down and building it back up but am hesitant because this cluster in currently in production...
    Any help would be appreciated

    Hi,
    I don’t find out the similar issue with yours, base on my experience, the 4096 error
     often caused by the CSV disk issue, and the 0x80005000 error some time caused by the repetitive computer object in OU. Please check the above related part or run the validate test then post the error information.
    Although I do have a CSV, there doesn't seem to be any problems with it and it was running just fine for a month or so before the problem started.  I double checked and there is no duplicate computer objects, maybe I don't understand what you mean by
    repetitive, could you explain further?
    The cluster validates successfully with a few warnings:
    Validating cluster resource Name: DT-FileCluster.
    This resource is marked with a state of 'Failed' instead of
    'Online'. This failed state indicates that the resource had a problem either
    coming online or had a failure while it was online. The event logs and cluster
    logs may have information that is helpful in identifying the cause of the
    failure.
    - This is because the cluster name is in the failed state
    Validating the service principal names for Name:
    DT-FileCluster.
    The network name Name: DT-FileCluster does not have a valid
    value for the read-only property 'ObjectGUID'. To validate the service principal
    name the read-only private property 'ObjectGuid' must have a valid value. To
    correct this issue make sure that the network name has been brought online at
    least once. If this does not correct this issue you will need to delete the
    network name and re-create it.
    - This is definitely related to the problem and the GUID probably got removed when we attempted a fix by resetting the object and trying the repair from the failover cluster manager.
    The user running validate, does not have permissions to create
    computer objects in the 'ad.unlv.edu' domain.
    - This is correct, we run a restricted domain.  I have a delegated OU that I can pre-provision accounts in.  The account was pro-provisioned successfully and was at one point setup and working just fine.
    There are no other errors nor warnings.

  • Can I change the network name?

    Can I change the network name on a newly set up Airport wireless network? I have just set up a new 3Gb Time Capsule and got so involved with trying to make it work that I just accepted the suggested name.

    I have a 2Tb in process.
    If this means that you are currently backing up data to the Time Capsule, let that process complete before you make any other changes.
    I think I can see how to change the network password in 'Keychain'. Is that ok?
    No, you change the wireless network password the same way that you would change the wireless network name....using the same window in AirPort Utility that is pictured above.
    Simply Edit / backspace out the current password and enter the new password that you want to use. Do the same to Verify and then click Update to save the changes.

  • I have just bought a Humax PVR and Humax W-Lan dongle to connect to my Airport Extreme. I have put the mac address into the AE. The installation screen is picking up my network name no problem but it won't connect to the internet. Can anyone help please?

    I have just bought a Humax 7500T PVR and a Humax W-Lan dongle to connect to my Airport Extreme.
    I have put the mac address into the AE. The installation screen on my TV is picking up the network name but once appied it won't connect to the internet.
    I've a few other things connected to the AE such as computers, ipad, itouch, etc, and have never had a problem connecting these once I've entered the mac address into the AE. Can anyone help me with this please?

    have you made sure that the network setting in the system preferences is set up to use dhcp? if not i would try changing it so that it shows that it is getting its address by dhcp

  • I can't join a network, because everytime I type in the password, join greys out.  It has a lock sign next to the network name, but I'm not sure how to unlock it.

    I can't join a network, because everytime I type in the password, "join" turns grey.  There's a lock sign next to the network name, but I'm not sure how to unlock it.  Can you help me??

    The way you "unlock" it is by typing in the correct password. The lock indicates a private network that requires a password. Are you sure you have the correct password? Is this your own home network?
    Why don't you reboot your iPad and try to log in again. Hold down on the sleep button until the Apple logo appears on the screen, let go of the button and the iPad will shut off. Turn back on by pressing the sleep button again until the Apple logo appears and let go of the button. See if the iPad will accept your password.
    If that doesn't work, you could try tapping the blue arrow next to the network name and then tap Forget This Network. Restart your iPad as described above. Then go back to settings, tap WiFi, select the network and enter the password again and see if it works.

  • The power went out and when it returned the network name and password was lost.  I can see the network in my connections and connect to it.  How do I get it back to the orginal name and password.  I have an HP laptop

    The power went out and when it returned the network name and password was lost.  I can see the network in my connections and connect to it.  How do I get it back to the orginal name and password? I have an HP laptop. 

    Chances are, there was a signficant power surge or voltage fluctuation just before the power went out. This type of thing can cause the AirPort Extreme to reset back to default settings.
    If this occurs, your only option is re-configure the device again, just as you did originally.
    In order to improve your chances this next time this happens, (especially if you live in an area where thunderstorms are severe), a good quality surge suppressor / voltage limiting power strip will really help, and may save you the entire device or a nearby computer next time something like this occurs.

  • Network : How can I get  the name of all computers in the lan ?

    Hi.
    Network : How can I get the name or the IP of all computers in the lan ?

    Easiest way to find all IPs would be to scan the network. Ping every possible IP in the network and all IPs that replied to the ping exist.
    Since I don't know how to do a ping in Java, I would scan for some Ports used by OS Services.
    Since I don't know which ports are used by windows, I think you should look for a ping class (or library).
    Scanning all ports for every IP in a class C network shouldn't take too long. And after finding one port you don't have to try the other ports for that IP, since it has to be online ;)

Maybe you are looking for