Can't choose cf server configuration on vista

Hi everyone,
I am a starter in using CF and I am trying to install it on vista, home edition. All works fine until I have to choose the configurarion. My desired configuration is server, but that option is disabled and I get the message that it has been detected on my system. But I have never installed it, so I am really puzzled here, what might be the cause of this? How can I get rid of this and be able to choose and install the server configuration?
Many thanks

Sounds like IIS is not installed.
Look here to see if you can install it on your version of Vista Home:
http://technet.microsoft.com/en-us/library/cc753473(WS.10).aspx
Then, if you can install it, follow the instructions here:
http://learn.iis.net/page.aspx/28/installing-iis-7-on-windows-vista-and-windows-7/
Ken Ford

Similar Messages

Sql plus can't connect to server From windows vista - VISTA 2007

ERROR-12154:TNS Could not resolve service name
SERVER OPERATING SYSTEM UNIXWARE 7.1.4
ORACLE 8i
D2K- RELEASE 2.1- SQL Plus 3.3
Loaded in front end on VISTA
NET EASY CONFIGURATION Closes, can't configure
I have done configuration manually.
I thing VISTA Not supporting or some protocol to be configured in VISTA
Please help me to solve the poblem.

So your 8i db is on unixware and you are trying to connect to it from you local vista machine ?
What Oracle client version are you using on vista ?
Lowest 8i that support 10g client connection is 8 1 7 3 , 11g will not connect at all, and i think all 9i's will work,
but it seems that you have wrongly defined entry in tnsnames for the db you are trying to connect to.

Can't find SQL Server 2012 Configuration Manager

In my Win8 I can't find SQL Server Configuration Manager.
I need to connect to an SQL Database using a specific port.
Does anyone know how to do that?
Thanks a lot!!

Hi Lina,
Did you install multiple SQL Server instances on your local server? We can not configure SQL Server 2012 instance under SQL Server 2008 R2 Configuration Manager.
If you had installed SQL Server Configuration Manager with SQL Server 2012, you can try to run "sqlservermanager11.msc". If this is not opening then you might not install SQL Server 2012 Configuration Manager.
Regards,
Fanny Liu
If you have any feedback on our support, please click
here.
Fanny Liu
TechNet Community Support

How can I save/backup my server configuration ?

Hi,
I'm new to OS X Server.
I have my server configured and running as planed.
But how can I save the server configurations?
So in case I have to reinstall, I can just reload the configuration.
Thanks,
JO

You can also run the the Server Assistant (/Applications/Server/Server Assistant.app) and save the resulting configuration to a file or as a directory record.
If that file is present at the root level of any local drive, or present on a directory server, when a new copy of Mac OS X Server boots up for the first time (Think USB pen drive) it will automatically configure itself and reboot.
This can be very useful if you need to setup many servers at once. However, you are only storing the serial number and a few basic settings (time zone, which services to turn on by default, etc) so this feature isn't really all that great for disaster recovery purposes. It can, however, save you a few minutes dealing with serial numbers when you need to rebuild a server NOW.
Also, since none of your services will be configured yet, it's usually best practice to setup a server without any services turned on (except maybe remote desktop) and then turn them on after you get things setup. This is where those "tear" sheet .plist backup files from Server Admin come in handy.
Matt Bryant
ACTC
Husson College and the New England School of Communications

Dedicated or shared server configuration

Hi all,
Good day...We have a 10204 rac db running on a linux server. Our concurrent connection are more than 1000..Is that good to have a shared server configuration or we can continue with dedicated server configuration...
thanks,
baskar.l

baskar.l wrote:
Good day...We have a 10204 rac db running on a linux server. Our concurrent connection are more than 1000..Is that good to have a shared server configuration or we can continue with dedicated server configuration...You make the question sound to exclusive - "shared OR dedicated".
In reality, all Oracle databases are capable of supporting both shared AND dedicated connections at the same time.
So perhaps the question becomes:
Based on the workload (typical transaction style) of the connections, how many shared and how many dedicated connections are required?
To answer that YOU need to understand your workload.

How can you tell what type of server configuration is installed? is it j2ee or not?

Before I run an updater, how can I tell if the server is a
j2ee server configuration or a "regular" server configuration? Its
on on Linux os...

My "Settings Summary" shows;
Server Product ColdFusion MX
Version 7,0,0,91690
Edition Enterprise
Serial Number blah-blah-blah
Operating System UNIX
OS Version 2.6.15-1.1833_FC4smp
JVM Details
Java Version 1.4.2_05
Java Vendor Sun Microsystems Inc.
Java Vendor URL
http://java.sun.com/
Java Home /opt/coldfusionmx7/runtime/jre
Java File Encoding UTF8
Java Default Locale en_US
File Separator /
Path Separator :
Line Separator Chr(10)
User Name nobody
User Home /
User Dir /opt/coldfusionmx7/runtime/bin
Java VM Specification Version 1.0
Java VM Specification Vendor Sun Microsystems Inc.
Java VM Specification Name Java Virtual Machine Specification
Java VM Version 1.4.2_05-b04
Java VM Vendor Sun Microsystems Inc.
Java VM Name Java HotSpot(TM) Server VM
Java Specification Version 1.4
Java Specification Vendor Sun Microsystems Inc.
Java Specification Name Java Platform API Specification
Java Class Version 48.0
--> and lots more, but no mention whether its a J2EE
configued server or not...so should I assume its not a
regular/non-J2EE server?
I ask because the Updaters instructions show a BIG difference
depending on which type it is to be updated...thanx...Matt

SharePoint Server 2010 can't connect to the Configuration Database

Hi Techys,
I have a SharePoint Server 2010 Farm, and I have Installed SharePoint SP1 package,
Then I,m trying to run the SharePoint configuration wizard, That time i have the below error.
"Can't connect to the Configuration Database"
I have checked all the services belongs to the sql server and SharePoint server.
here i found, SharePoint Timer service is automatically Stopped while browsing the Central admin url.
Please help me to resolve the above issue.
Many Thanks,
Madhu

What you mean error in Config wizard, could you please share the complete error log?
For Timer Services, check under which account it is running and check event log why its stoped?
for CA error there are couple of possible reason for this:
Make sure SQL related instances / services are running fine.
Make sure your farm admin account have permission on config DB.
Make sure Config Database Exist.
Make sure you can connect to SQL server from your APP /WFE.
If everything is running fine, then you may need to reconfigure the sharepiont products and technologies configuration wizard. The issues might be because of the update that might have installed some additional components for installation.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Can't send mail - server properly configured and up

I'm unable to send mail. Here's roughly the sequence of events that
got me where I am:
1) Connect through a firewall using VPN (the Cisco VPN client)
over the wireless interface
2) Compose a message, and click 'Send'
3) The server is down, so I get the "Can't send e-mail" pop-up
dialog
4) Click 'Try later'
5) Reconnect later while the server is up, and try to send
6) Still see the "Can't send" pop-up
Steps 3) and 4) happened a lot. In particular, turning on the
wireless interface in order to connect over VPN causes Mail to try
(and fail) to connect to the server.
The server is up; I can reach it with "telnet <server> 25".
Moreover, Mail's own "Connection Doctor" says it's able to connect
to the server.
This configuration worked until the sequence of events described above,
and nothing on the server side has changed since.
I've tried everything I can think of to get Mail back in a working state.
Notably I've deleted the contents of "Outbox", quit Mail, and then restarted.
I've also deleted and re-created the server configuration, without success.

Two additional data points:
1) I found a mail server I could use from outside the firewall.
When I added that server, and closed the VPN session, Mail was
(finally!) able to send. (But see below why you shouldn't rush
to blame VPN).
2) When there are two mail servers configured in preferences, the
"Can't send mail" pop-up gives you the list of choices. If you
select an alternate server from the list, the "Try selected
server" button ought to try the new server. Instead, the
pop-up reappears, still complaining about the old server.
As for why I'm not prepared to blame (only) the VPN:
* Note that the server is perfectly accessible; telnet works,
and Mail's Connection Doctor says the server is up.
* Point 2) above indicates some problem in Mail with the logic
for retrying access to the failed server.

Can anybody know how to configure Multi threaded server?

Hi
All,
Can anybody know how to configure Multi threaded server?
Thanks,
Vishal

Values are just samples only. use what ever appropriate for your environment. Understand each of them before using in production.
alter system set DISPATCHERS="(PROTOCOL=tcp)(DISPATCHERS=3)(CONNECTIONS=1000)"
alter system set shared_servers=100
replace "DEDICATED" with "SHARED" in tns names
Ready to go.
select username,server from gv$session (server should show none or shared)

Can I choose to run the cloud server role instance on a windows server 2013 core?

Since the cloud service allow me to choose the OS family on the role instance, is there a option i can choose windows server 2012 core?
My think is use the core will save some resources and good for the performance.
If there is no such an option, then, If i remote to that role instance and switch the os to the core, what is it going to happen?

Hey,
There is no Core installation in the Gallery of Azure.
You can install the server with the GUI interface and then you can remove the GUI from the powershell with these commands so it will be basically core installation:
Get-WindowsFeature *gui* | Uninstall-WindowsFeature –Restart
Good Luck,
Ido

Can't find SSL certificate in SQL server configuration manager?

Hi
It's been 2 days and I need a help. I have visited a number of sites and I still can't make it work
Two severs I have: Windows 2012 Standard with SQL 2008 R2 and SQL 2012
I am trying to set it up on SQL 2008 R2 right now.
I have a certificate from a CA and did the followings.
1. Open MMC
2. Add Certificates Snap-in as a computer account (In fact, I tried all the three accounts)
3. Right click-on Personal folder and All taks and Import
4. Installed the certificate with Certificate import Wizard
5. The certificate shows up under Personal/Certificates and Trusted Root Certification Authorities/Certificates
I did this with a local administrator account as well as MSSQL account(SQL Server service account I created). Even though the server is part of domain, SQL server is set up with local accounts.
This is a simply summary. I tried everything in the article such as 'Create Custom Request'.
I am not sure what I am missing. Why can't I see the certificate in SQL Server configuration manager?
I even made MSSQL (service account) as administrator. Not working.
as I am not using the domain service account, I believe below is not relevant.
Missing detail on "Install a certificate in the Windows certificate store..."
When following recommended security procedures and running SQL server under a domain service account, the service will fail to start after assigning a certificate to the protocols. This is because the service account does not have permissions to read
the private key. Fix this in the Certificates MMC snap-in (preferably right after installing the certificate.) Select the certificate you just imported, then in the Action menu select "Manage private keys." Grant the domain service
account read access to the private key of the server certificate.
Below is the few of reference I looked at..
https://support.microsoft.com/en-us/kb/316898/
https://msdn.microsoft.com/en-us/library/ms191192(d=printer).aspx
https://technet.microsoft.com/en-us/library/ms189067(v=sql.105).aspx
http://www.mssqltips.com/sqlservertip/3299/how-to-configure-ssl-encryption-in-sql-
http://blogs.msdn.com/b/sqlserverfaq/archive/2010/05/28/inf-permissions-required-for-sql-server-service-account-to-use-ssl-certificate.aspx

Hi Dinesh
Thanks for the reply.
I did looked into the both sites as well. but it did not work.
Below is the step to install SQLs server certificate. and I was stuck with Step 9. when click 'next' in the wizard, I am not getting into a place to select 'computer' as certificate type.
Do you know what is wrong please?
Open the Microsoft Management Console (MMC): click Start, then click Run and in the Run dialog box type: MMC
On the File menu, click Add/Remove Snap-in...
Select Certificates, click Add.
You are prompted to open the snap-in for your user account, the service account, or the computer account. Select the Computer Account.
Select Local computer, and then click Finish.
Click OK in the Add/Remove Snap-in dialog box.
Click to select the Personal folder in the left-hand pane.
Right-click in the right-hand pane, point to All Tasks, and then click Request New Certificate...
Click Next in the Certificate Request Wizard dialog box. Select certificate type 'Computer'.
You can enter a friendly name in text box if you want or leave it blank, then complete the wizard.
Now you should see the certificate in the folder with the fully qualified computer domain name

I am not able to configure Exchange in iphone 4, everytime i do, it shows " can not get to server"

Hi Everyone,
I tried to configure exchange in my iPhone but could not do that. Evrerytime i got message " Can not connect to server."
Please let me know how can i use exchange through my iPhone..
Thanks
Amit

I entered correct server URL, even my admin himself entered this but still facing same problem. Other are operating exchange through iPhone..

Audigy 2 ZS on Vista .. no 5.1 sound i can't choose speak

Hi folks,
the headline says everything.
I got the newest Vista 32 bit drivers installed and still i can't choose any speakers in the creative audio console. The dropdown-list is completely empty.
I can only hear stereo sound. When i choose 5. in the *windows* audio menu, only the subwoofer and the left and right speaker works. Not the center and not the rear speakers.
Am i doing anything wrong or does the beta Audigy2 ZS driver simply doesn't support 5. sound?
Greetings,
Frank

thanks for the quick reply...
i tried everything, but it's not working.
I've re-installed the drivers a dozen times, but still
i can't choose any speaker setup in the creative audio console.
Also, in Windows, when i test the 5. speakers, i only
hear sounds from the front speakers, not the rear speakers and the center. When I connect the rear speakers to the position of the front speakers, only the rear speakers are acti've, so the cable setup is correct and the rear speakers are intact.
this is driving me crazy. Maybe because it's not a vista clean install? I updated it from XP...
Anyone else the speaker-choosing problem?

I can not send messages because the server is wrong. but I also can not get into the server configurations

Hello there
I can not send e-mails because the server configurations are wrong, but I can not get into the configurations by the normal way

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try a Reset - iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
Or this - Delete the account in Mail and then set it up again.
 Cheers, Tom

"Safari Can't Find the Server" is chronic in Safari under Snow Leopard...

Since moving to Snow Leopard (or perhaps it is just an updated Safari in SL and otherwise not related to SL??) when my Mac starts up from sleep with Safari being already open, I typically find a blank message with "Safari Can't Find the Server"... And just clicking on pages, I sometimes get that same message. Sometimes I get the spinning gear (for way too long) and I've learned to stop it and just click the same link again and more often than not, it opens immediately the second time...
Any ideas??? Is this a bug that Apple needs to fix or do I need to do something to Safari (or something else) to fix this problem???
thanks... bob...

Robert Paris wrote:
Whoa... Now I'm really confused... When I go to my System Preferences, then Network, highlight Airport, then click on Advanced, then choose the DNS tab, all I see under DNS Servers is the internal IP address of my Apple Router (10.x.x.x).. And next to that under Search Domains is hsd1.ca.comcast.net... And that is all there is... And I didn't set any of that up... When I bought my Apple Extreme Router a couple years ago, I was so impressed because I came home, plugged it in, basically said "GO" and the router set it all up and just worked... And I'm pretty sure (though not positive) that the Router put the 10.x.x.x in that preference panel, in other words, pointed to itself for DNS services...
This is effectively saying that the DNS configured in the router will be the default.
So help me understand... If I change the DNS settings on the mac from 10.x.x.x to the OpenDNS values, the router would still have the Comcast values in it??? How does that work??? And if I only change them on my mac, then the rest of the computers on my home network would still be using the original Comcast DNS servers as established on the router, yes??? I mean I think that would have to be...
If you change your Mac, that is what it will use. Other computers will use whatever
they are configured to use.
See my confusion??? Again, I know only enough about Network settings to know that if I click a wrong button I could make a lot of trouble... So I don't move until I understand what at least a little more than clearly I know now...
So how do local (mac) settings for DNS play (or not) with DNS settings up at the router level???
The local settings should override anything else since that is what will
be used first. They have no interaction with what is at the router level.
thanks... bob..
Dave

Can't choose cf server configuration on vista

Similar Messages

Maybe you are looking for