Can't Directly Rate my Images using Stars in Adobe Bridge CS3

Hi
I can rate my images in Adobe Bridge CS3 by using the drop down 'Label' menu. However, I cannot rate my image by stars directly under my image thumbnails as my book suggests I can. The book states: "You can also assign stars directly under the thumbnail by clicking on the dots".
Is there anyway I can do this? Do I have to change some preferences?
Many thanks in advance for anticipated help.

try resetting your preferences by holding Ctrl right after you launch Bridge(you have to be fast, you'll get a dialog box if you succeeded)
Though you'd need to do this only if you are doing it correctly in the first place. With a picture selected you'll notice 5 small dots beneath its thumbnail which you can click on to rate things. If you don't see the dots then increase the thumbnail size by adjusting the slider at the bottom of the screen

Similar Messages

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN A

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
I use a lapto (windows 7) 64-Bit operating system.
Thank you,
my email is: [email protected], if you send me the answer to my query

You need to activate Photoshop.
Mylenium

Can we directly access database by using BI Accelerator ?

Hi Experts,
I have several question about BIA NetWeaver2004:
        1. Can we directly accessing database by using BIA?
        2. What is advantage and disadvantage of BIA? Why'd some people rather use BIA than Aggregates?
        3. Could anyone show me the example or demonstration about BIA
I am a newbie in BI, so please give me information about BIA.
Thanks a bunch.

Hi,
Welcome to SDN. Remember the rule --- before posting, you should search the forum first.
1. Can we directly accessing database by using BIA?
---> No.
2. What is advantage and disadvantage of BIA? Why'd some people rather use BIA than Aggregates?
--> search SDN
3. Could anyone show me the example or demonstration about BIA
--> search SDN
Thanks...
Shambhu
Edited by: Shambhu Kumar Gupta on Mar 17, 2009 11:22 AM

I have an iPad 2 and a Nikon DSLR. How can I transfer RAW/Tiff images using a compact flash card

I have an iPad 2 and a Nikon DSLR. How can I transfer RAW/Tiff images using a compact flash card? Plugging in the camera at the ipad connector doesn't seem to work, possibly due to lack of power.

This may apply.
Fix (for Nikon D800)
http://www.georgewheelhouse.com/blog/2012/10/ipad-ios-6-update---camera-connecti on-kit-fix
Are you using an SD, SDHC, or SDXC card? And what capacity?
 Vheers, Tom

Can multiple computers in one office use the same Adobe ExportPDF subscription?

Can multiple computers in one office use the same Adobe ExportPDF subscription?

Hi urinutrioned,
An ExportPDF subscription is tied to a single Adobe ID and password, so it's meant for a single user to access.
Best,
Sara

Can a PDF of an Indesign doc be created from Bridge CS3

Can a PDF of an Indesign doc be created from Bridge CS3 without opening the Indesign file; and retain version cue version info as you would "page information", using an "Adobe PDF Preset" ?

Hi Willi:
Thanks for your prompt response. Do you know if there are any scripts that can do this or at least help automate some of this process?
Thanks!
Kevin

How can I dowload and install libagluc28.dll in my Adobe Bridge program?

How can I download and install libagluc28.dll in my Adobe Bridge program?

libagluc28.dll file issue - Microsoft Community
…and I doubt it has anything to do with Adobe.

Siri can't understand "Rate this song 5 stars"

My goal is to rate all of my music.
So I have a playlist of all 'unrated' songs, that I typically play to/from work in the car during the home-work-home commute.
So I'd like to be able to instruct Siri to rate the current sing playing by just saying 'rate this song 4 stars' or something like that.
That would be the least distracting to my driving and allow me to use the commute to rate my songs.
Other commands could be :
-Add to playlist <playlist name>
-Remove from this playlist
-Copy (or move) to playlist <playlist name>
I thought that this would have been one of the most useful Siri command sets for the music playing while driving/moving context.

I this is very strange indeed.in my case it's exactly the opposite that is happening.Siri has no problem understanding me on my iPhone 5 but all of a sudden starting two days ago, Siri Eye in my Honda Civic doesn't understand me or parts of what I'm saying only....

Using Aperture with Adobe Bridge: Can It Work?

I have used all the Adobe apps for ages and love them.
Photoshop and Bridge are a mainstay of our studio operation here.
I have been using Adobe LightRoom lately to deal with my RAW shooting.
I take it to a certain point with LR then I use Bridge to do other things with my files. LR and Bridge can see eachother's metadata and XMP info so they can be opened back and forth between the apps as need be.
This is critical for our work process.
What Im wondering is can Aperture be used in a similar way?
Can Bridge see Aperture's adjustment info and visa versa?
Do they read eachother's Metadata and or XMP info?
Does Aperture even use XMP data?
Reason Im asking this is I admire Aperture's interface and functionality.
I'd like to possibly use it in place of LightRoom for dealing with my RAW files.
But without the compatibility with Bridge it wouldnt work for us.
I read lots of Mac and Adobe publications and have yet to see this issue addressed in any articles.
Surely other people are in the same boat as me on this one...
Anyone have any knowledge to share on this matter?
Thanks.

Bridge and LightRoom can see each other's image adjustments because they are using almost exactly the same engine to do RAW conversions. Aperture and Bridge won't understand each other's image adjustments, in just the same way that Bridge and Nikon Capture, Canon DPP, Bibble or Capture One etc. can't.
When it comes to metadata you won't be much better off, as any changes you made in Bridge wouldn't be seen in Aperture unless you re-imported the file and vice-versa.
Basically, if your workflow is based around Bridge you are stuck with Adobe apps as they are the only ones designed to work with it.
Ian

Camera raw images change colour in adobe bridge

I have photoshop CS4 and import my camera raw images into Adobe Bridge. When I view the thumbnails in bridge my raw images look vibrant and exactly like they appear on the camera but when I go to open them in camera raw edit they change colour and look washed out before I've made any changes. Can anyone help me figure out how to correct this?

ssprengel wrote:
My camera is set to shoot sRGB JPGs and is set to all zeros for the brightness/contrast/saturation parameters.
What is your camera set to as far as these basic toning settings, as well as any automatic things like DLighting or highlight compression and perhaps any custom curves or whatever that is called for Nikons?
First paragraph - so is mine.
Second paragraph - all other settings are neutral/zeroed/turned off, as per my post to which you responded. That is, no additional tone curves - Active D-Lighting turned OFF (why anyone would let the camera decide what to do do with highlights and shadows is beyond my level of trust) , Jpg compression is Optimal (least possible) et cetera.
Think I now have an explanation for the different displays in ACR (and Bridge) that I have been experiencing. Took a new duplicate Jpg/Raw shot with the in-camera Picture Control set to Neutral. Now, when both the Jpg and .NEF Raw are viewed in ACR, with the ACR Camera profile set to Camera Neutral, they appear, ASAICT, identical. Saved Camera Neutral as the default ACR Camera profile. Now back in Bridge, the images also appear pretty much identical.
I think what was happening previously was that I had failed to save Camera Standard in ACR as the default Camera profile, and it was defaulting to Adobe Standard, and hence it was rendering Raw thumbnails for Bridge to that Camera profile - hence the difference in appearance between the Jpg and Raw in Bridge. Unless I have got it completely wrong, I think my problem is now solved.

Can only open some JPEG files in Camera Raw through Bridge CS3

I'm running Bridge CS3 version 2.0.0.975. I always edit my JPEG files through Camera Raw in Bridge CS3. I only have to Right-Click on the file and select "Open in Camera Raw...". However, I've come into a situation where some jpg files will not open this way; the option is not even there.
I have made sure to tick the box in preferences under Behavior "Double-Click Edits Camera Raw Settings in Bridge", and also tick the box under Thumbnails -> Performance and File Handling "Prefer Adobe Camera Raw for JPEG and TIFF Files.
These files were originally 16bit Grayscale TIFF files, but I changed them to RGB 8bit JPEG files.
Also, I know the program works because I navigate to an older photo I worked which is a JPEG and the "Open in Camera Raw..." option is there when I Right-Click, but then I navigate back to the image I want to edit, and the option is not there.
Here are links to my screenshots of what I'm talking about. Both images in the last two screenshots are JPEG:
General Prefs - http://img535.imageshack.us/i/prefgeneral.png/
Thumbnail Prefs - http://img716.imageshack.us/i/prefthumbnails.png/
Camera Raw Option - http://img847.imageshack.us/i/option.png/
Camera Raw No Option - http://img852.imageshack.us/i/nooption.png/

function(){return A.apply(null,[this].concat($A(arguments)))}
MapsCollector wrote:
When I open Photoshop CS3, then go File -> Open As and change the Format Type to "Camera Raw", the JPEG files vanish and I can only see the TIF files. When I open them, it doesn't open in Camera Raw, but rather opens like a normal file would.
That's a fundamental problem right there, and a clue in all this. You should be able to see JPEGs in the Open As Camera Raw dialog.
What happens if you type in the name?
I'm almost convinced you have a file named .jpg but with a different image format inside. Can you put one of these files online for others to try to open?
-Noel

Viewing .nef files I can no longer view my nikon .nef files in adobe bridge.

Please help. I used to be able to view .NEF files in Adobe Bridge but now they do not open. I tried to open them in PS by double-clicking but I get the message.....could not complete your request because it is not the right kind of document.

As a start you should update your profile it still says you are using 10.6.1 and including the Aperture version would be a good thing also. So have you upgraded to 3.2.1 yet? If not you should.
As a start you should look at Aperture 3: Troubleshooting Basics and see i that helps.
Post back
regards

Trying to install AOM in Bridge CC but can't find the "Mac OS: /Library/Application Support/Adobe/Bridge CC Extensions" folder - where is it? Thank you!

After updating to 10.9.2 the Finder changed and I feel something is hiding - for example, I no longer seem to be able to "GET INFO" about my hardrive... only my drive and "my documents" etc... maybe this has something to do with not being able to find this folder: Mac OS: /Library/Application Support/Adobe/Bridge CC Extensions

Jeff... Yes. I meant to mark this solved - found another thread recommending using FINDER-GO TO- and /Library/Application Support/Adobe/Bridge CC Extensions.
It worked easy.
That little bit of info would be a great addition to that install AOM instructions.
Thank you for asking!

How to import Images from Aperture to Adobe Bridge

It seems as if my aperture vault cannot be accessed from Adobe Bridge. As I ofter use the camera RAW it would be nice to assess the files in Aperture with the step of Export Master to Desktop.
Thanks.
Jack

after adobe bridge is installed. Go to aperture preferences. Choose export in the preferences apne then external editor. and choose adobe Bridge in you applications.
Works great and only took a day to figure out.

How can I create a NetBoot image using command line tools?

Is it possible to create a NetBoot image entirely using command line tools?
(That is, without using the SystemImageUtility)
If so, are there reasonable instructions posted somewhere?
I don't believe I can use SystemImageUtility with my current setup,
but I would be happy to hear how I could:
I have a set of Xserve clusternodes but without optical drives or video cards.
One node acts as the head, running DHCP, DNS, OpenDirectory, Xgrid.
They are wired to a gigabit switch.
I have a PowerBook connected on the subnet which has ServerAdmin Tools installed.
I don't think when I run SystemImageUtility on my PowerBook that I can successfully image one of the clusternodes disks over the network.
I have tried to start one node in target(Firewire) mode, connect it via Firewire
to the head node, and run hdiutil from the head node to make a complete disk image of the clusternode's drive.
But a NetBoot image requires the whole nbi file, right?
Could I then use copy this disk image to my PowerBook and use SystemImageUtility on my PowerBook to create a NetBoot image from it?
I really have tried to read the PDFs, but I found the section on System Imaging in the Command Line Reference rather unhelpful.
Thanks for anyones help.
dmaus
Mac OS X (10.4.4)

To create a NetBoot image, you could just put the cluster node in target mode and attach it to your PowerBook. Then use SIU to create the NetBoot image.
If you're trying to create a backup image of the disk, use hdiutil, or put in in target mode and create the image with Disk Utility.

Can't Directly Rate my Images using Stars in Adobe Bridge CS3

Similar Messages

Maybe you are looking for