Can't get internet

I've got three computers on my home network and on one of them I can't get the internet to work. This machine is running 10.3.9 and I've tried safari and firefox. The machine in question is able to access the network fine and sys prefs says that it's connected to the internet but pages never load. I've restarted the computer and the router and that didn't do anything. any other ideas?

Ok, if I understand you correctly, your setup looks like this:
<pre>
+----------> Powerbook
(via wifi)
Wall --> wireless routerPC
(via cable)
+----------> G4 tower
+----------> PC
</pre>
I'd compare the PB and the G4 to see if anything differs between them (besides the airport or cable) in their settings.
I used to use a G3 as a hardware router, and I had to disconnect all other machines from it, boot it up, and then reconnect them. Once the router had established its IP from my DSL, it was ready to assign the other computers its IP. So for my setup it was all about order of boot. Perhaps if you tried that (assuming that the PB and G4 have identical settings except as mentioned above), then all the computers would receive their IP addresses.
Right now, it sounds like the G4 has an IP address that some other computer has, which is why it can't connect.
HTH,
~FifthWheel

Similar Messages

Can't get internet to work w/windows: DSL- Graphite

I am trying to get this home network to function, here is the problem.
The home network consists of the following:
DSL
Airport Graphite
Ibook G4
Win 2K PC
The G4 works fine, but i can't get internet on the Win2K machine. It even gets as far as having an IP assigned using DHCP, but then no internet.
Perhaps because the default gateway is missing?
I am able to connect to the base station it seems. The wireless connection comes up and shows that it is connected.
Thanks,
Nick

looks I'm having same problem
my Ibook G3 and ABS graphite working as perfect team, any way I set the DHCP in my network. BTW, here is it:
- DSL router (hired from ISP), web GUI, bad technical help; set with 192.168.1.1 private IP@, no DHCP
- ABS fw 3.84, manually set as 192.168.1.3, internally DHCPing addresses like 10.1.1.x with NAT
- iBook G3 700 with X 10.3.3 and airport card
- company laptop running W2K SP4 with D-Link DWL-G122 wireless adapter, always connecting to the network but unable to browse any web page
everything works fine (I'm writing this message wirelessly from iBook), looks there's no way PC can get an IP@, the wifi adapter can't reach DHCP server (as a result of a "ipconfig /renew [adapter name]"; it always gets automatically an IP@ like 169.x.x.x because no DHCP server is available.
I tried also the ABS to distribute IP@s in 192.168.1.x format (without NAT) but no change. I tried to work with ABS as simple bridge to router working as DHCP server, but PC cannot pass thru ABS... can connect only using ethernet cable to router directly
any suggestion GREATLY appreciated, since I'm working from home and I need to connect from 9 to 6 with PC!!!
thanks
Andrea (Mac newbie)
PS: ABS is configured on those two MAC@s only, I have also a PIII desktop running Mandrake Live, but by now will use the D-Link adapter on it

Can't get internet on my Ipad and Iphone

Hi,
I just got a new Time Capsule. It is now connected to my TIME WARNER CABLE modem and I am able to get wireless internet on my Mac. However I can't get internet on my iphone and ipad. Althought the light is green and everything seems to be fine. Any clues?

If you have not yet done a full modem reset, that would be the first step to perform.
Push the reset button on the modem (If present) and then power it off
Pull the battery from the modem (if easily accessible)
Power down every other device you have....order is not important
Wait for at least 30 minutes.
Make sure that the Ethernet cable from the modem is plugged into the WAN port (circle icon) on the Time Capsule
Power up the modem and let it run 4-5 minutes by itself
Power up the Time Capsule the same way
Power up each other networkdevice one at a time about a minute spart
Check for proper operation

Where can I get Internet Toolkit for LabVIEw v.5.1

I would like to start Internet (web-based) application and using labVIEW v.5.1 now. So how can I get Internet Toolkit for that version and where can I get manual for that purpose.

All NI manuals are available as PDF versions in our Manuals library at http://www.ni.com/manuals
The latest version of the Internet Developers Toolkit for G Reference Manual is at http://digital.ni.com/manuals.nsf/websearch/EB3302A150B625AC8625665E00635958?OpenDocument&node=132100_US
Good luck,
Kelly HolmesLabVIEW Documentation
Kelly H
LabVIEW Documentation
National Instruments

I HAVE AN IPAD 2 WITH WIFI ONLY, CAN I GET INTERNET ACCESS FROM ANY SMARTPHONE, OR DO I NEED A SPECIFIC PHONE FOR THIS?

i ave an ipad 2 with wifi only, can i get internet access from any cell phone, or do i need a specific phone or type of phone

I received an iPad 2 for Christmas (the 1st Apple item I've ever owned!) and own a Nokia N95 8GB mobile (that's pretty much on its last legs/ready to die any day).
On the Nokia I've got 2 apps (downloaded from/via Nokia's 'Ovi' app store): JoikuSpot & HandyWi. Both are the free versions.
I've not used HandyWi much - if at all - but JoikuSpot has been great. Basically, it creates a wifi hotspot (as pjl123 mentioned) in a couple of straightforward steps, and allows a few devices to be connected. It displays who/what is connected at a given time - so you can check if the guy having coffee behind you is piggybacking your hotspot or not! - data packets sent received etc.
The paid version has the benefit of allowing you to secure the hotspot and other security features. Their website is www.joiku.com, FYI.
Given how slow behind the 8 ball Nokia has been, their phones are getting cheaper and cheaper - given Joiku's meant to work with Nokia S60, Symbian ^3, Maemo, Meego & Sony Ericsson S60, this might be a cost effective option.
Ps. Ah! One more thing - Joiku's website specifies that 3G must be used; that WAP will not work. Good luck, enjoy!

I can't get internet connection even after wi-fi set is done with cisco

I can't get internet connection even after wi-fi set up is done with cisco

Not sure what Cisco is but if you are having problems with your wifi this link might help
On the iPad... tap Settings / General / Reset / Reset NetworkSettings.
Or here is a link that might help http://support.apple.com/kb/TS1398

Can't get Internet to Linksys WRT54G using ARRIS TM502 modem (Cable ISP)

I just switched from DSL to Cable and now i can't get internet to the Linksys router. I can connect to it from a wireless laptop but just not get on the internet I've read other posts about doing the "clone mac" address and doing the power cycle but still cannot get the Linksys to respond. I enabled the WRT54G to clone the mac address and have spent about 10 hours in two days trying to get this to work and looking online, etc.... Any information at all would be greatly appreciated. Thank you, leo

After talking to Comcast again and getting another support person who didn't seem to know much, I decided to take matters in my own hands. I connected new Linksys wrt160n to Arris tm502g, but left router power off. I then did reset button on Arris modem for 10+ seconds and let it reset. I powered up router and then powered up PC that I had plugged in port1. When I went to status on router I finally had gotten IP addresses from Comcast. I then plugged my switch into port 4 and checked other devices in the house and they were ok.
Hard to believe that no one from Comcast or Linksys seemed to have a clue on what to do when I talked to them.
Thanks for your help. Hopefully someone else will find this if they need it.

Can't get internet access unless I am at home...

I can't get internet access, use my navigation or get messages unless I am at home. I have tried everything, and don't know what else to do. Please HELP any suggestions would be appreciated! Thank you!

Hi nthompson77,
Welcome to BlackBerry Support Community Forums.
Do you have a data plan with your wireless provider that supports internet browsing and messaging?
If you do, is your signal uppercase or lowercase when you're having this issue? Have you tried reinserting your battery?
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Can't get internet on more than one computer!

Hi--
We recently changed internet providers, and now only one of our computers seems to be able to use the internet at a time. All of them show a full signal from the airport in the toolbar, and there does not seem to be any problem with the airport itself. So even though nothing seems to be wrong, we can't get more than one computer on the internet, a problem that never occurred before we switched our provider.
I need to fix this, but am not sure where to begin, because I can't determine what the problem is. I'd appreciate any sort of clue as to where to begin.
Thanks.

JerryMc, Welcome to the discussion area!
Is the AirPort Express (AX) the only router you have? If so, you need to make sure that it is configured to "share a single IP address".

How can I get internet explorer on my macbook pro?

How can I install internet explorer on my macbook pro? Thanks!

Install Windows 7 into a virtual machine program (IE comes with it), I suggest VirtualBox as it's free and gets updates for near forever. However VMFusion and Parallels has more features but then to drop you if you don't upgrade OS X.
Windows in BootCamp or Virtual Machine?

Can't get internet to work on my formated Satellite A100

Hey,
I recently formated my computer and then I installed all the drivers that i needed for my A100 PSAA9... but internet wont work... i kinda understand why but don't know what to do about it....
if i'm not unentierly mistaken the driver needed to get internet to work with my adsl is the LAN driver, no?
Well i downloaded that one but when i tried to install it there was no setup file or installation file only an uninstall file... unfortunately for me i managed to click that one a bit too fast without checking what it was now, that leaves me with 2 questions:
Are the LAN drivers pre'installed with windows so that internet can work from the start?
How do i do then if this is not the case to get internet working?
All help is much appreciated, thanks on beforehand Maxime Maison

Hey, thanks for all the advice so far!!! I googled the device manager and figured out what it was :P problem is i have my OS in swedish so it's different...'
anyway, I did what you said but i still doesn't work.. i don't know if there is something else but i'll provide details so you can tell me if i did something wrong:
I enter the device manager, I expand net adapters and i get 1 option called: 1394 Net Adapter I click update drivers and get the options that you posted above. When I click the don't seach i'll choose myself part i get the 1394 net adapter in a little box displayed as net adapters and i can either click "floppy exists" or click previous, next or cancel nothing where i can choose to click the unzipped driver i downloaded. I click next and the says that the software has been installed for the 1394 Net Adapter and then i click finish.
This might mean that the driver was installed all along i don't know but internet still won't work so i don't know what to do and until you showed me all of this i had done nothing else but the first time i did it, nothing seemed to have changed....
i wish it could just fix itself :(

Can not get Internet

Alright so I got both network cables plugged into my computer and modem into the router since my computer has no adapter. When I try cisco connect it says : Internet lost , even though on my modem and router both say the Internet is going and my computer says it is connected. I can not get any Internet on any other devices.

What is the model number of your router?
Who is your Internet service provider?
Your computer is connected to the router and you can access the Internet on the main computer. Is it correct?
I think the Cisco connect software might not be working properly.
Try to uninstall and reinstall the Cisco connect software on your main computer.
Connect the computer to Ethernet port 1 and modem to the Internet port on the router.
Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 10 seconds. Power cycle the router.
Run the Cisco connect software on your computer again.
Once you are able to install the Cisco connect software successfully, you will be able to connect to the network on other devices also. Cisco connect software will create a wireless network for you with a unique network name and password.
Open the Cisco connect software and go to router settings. You will see the name and the password for your wireless network. Use that password to connect to the wireless network on other devices.

Can't get internet with new Macbook pro

As the title says I can't seem to get internet with my new Macbook Pro. I get wifi fine, use the password on my router and that works, but I still can't get connected to the internet. I know the router works, as I can use another laptop on it. Any ideas on what to do? (other than call Apple which I'm doing when I get out of work.)

iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
Do not confuse moving your whole folder and library with moving just media files as in
iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
which is what I think you did.

HT1222 How can I get Internet Explore 6 for Mac

Dear Friends
Happy New Year to you all
I need Internet Explore 6 to instal in my mac book pro how can I get it installed

If some website is saying you need IE 6, try this:
Enable the Develop Menu in Safari Preferences.
Then choose one of the IE user Agents. Then try the site again.
This won't work with a site that is programmed to use only ActiveX controls.

Arch can't get internet from router [SOLVED *knocks on wood*]

I setup a linksys router, and it doesn't work properly with arch. I can connect to it, but there's no internet.
Other computers on the router can get internet, and windows vista on the same computer as arch can.
There is another router upstream from this one.
The new router uses a static IP, and arch uses DHCP.
Last edited by Raccoon1400 (2009-04-13 22:07:31)

I can't ping any of the IP addresses for Google.
I can ping the router.
I can' ping a URL.
duncan@duncan-arch ~]$cat /etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="yes"
TIMEZONE="Canada/Eastern"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=(bcm43xx b43 ssb) #deprecated
MODULES=(mii ndiswrapper b44 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel acpi-cpufreq cpufreq_ondemand cpufreq_powersave soundcore vboxdrv usblp fuse iwl3945)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="duncan-arch"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
wlan0="dhcp"
INTERFACES=(eth0 wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng dbus @cpufreq @hal alsa @dhcdbd @networkmanager @crond @cups)
duncan@duncan-arch ~]$
duncan@duncan-arch ~]$cat /etc/resolv.conf
# Generated by NetworkManager
nameserver 67.69.235.1
nameserver 207.164.234.193
duncan@duncan-arch ~]$

Does anybody have trouble with windstream modems and the iMac? can't get internet.

I can't get on the internet with my new modem from windstream. My old one worked alright but would need rebooted once a day so we switched. My itouch and pc laptop and Wii all work fine but not the iMac. HELP!

Hello, C.pierce89.
Thank you for visiting Apple Support Communities.
Here is the troubleshooting article that walks you through how to correct the 0x80090318 error that you are receiving.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Cheers,
Jason H.

Can't get internet

Similar Messages

Maybe you are looking for