Can't get iscsi working
Hi,
First sorry about the long post but any help would be really appreciated. I can't seem to get iscsi working what am i doing wrong?
May 24 09:53:39 edsrvscdm-01 iscsi: NOTICE: iscsi connection(5) unable to connect to target iqn.1992-08.com.netapp:sn.135042183
bash-3.00# iscsiadm list target -v
Target: iqn.1992-08.com.netapp:sn.135042183
Alias: -
ISID: 4000002a0000
Connections: 0
Discovery Method: Static
Login Parameters (Negotiated):
Data Sequence In Order: -
Data PDU In Order: -
Default Time To Retain: -
Default Time To Wait: -
Error Recovery Level: -
First Burst Length: -
Immediate Data: -
Initial Ready To Transfer (R2T): -
Max Burst Length: -
Max Outstanding R2T: -
Max Receive Data Segment Length: -
Max Connections: -
Header Digest: -
Data Digest: -
This is the setup I have done:
# svcadm enable network/iscsi/initiator
Collect the IQN number of the system.
# iscsiadm list initiator-node
Initiator node name: iqn.1986-03.com.sun:01:00144fa05cee.4ddb6b11
Initiator node alias: edsrvscdm-01
Login Parameters (Default/Configured):
Header Digest: NONE/-
Data Digest: NONE/-
Authentication Type: NONE
RADIUS Server: NONE
RADIUS access: unknown
Tunable Parameters (Default/Configured):
Session Login Response Time: 60/-
Maximum Connection Retry Time: 180/-
Login Retry Time Interval: 60/-
Configured Sessions: 1
Create an lun on netapp filer
lun setupThis setup will take you through the steps needed to create LUNs
and to make them accessible by initiators. You can type ^C (Control-C)
at any time to abort the setup and no unconfirmed changes will be made
to the system.
Do you want to create a LUN? [y]: y
Multiprotocol type of LUN
(solaris/windows/hpux/aix/linux/netware/vmware/windows_gpt/windows_2008/xen/hyper_v/solaris_efi)
[linux]: solaris
A LUN path must be absolute. A LUN can only reside in a volume or
qtree root. For example, to create a LUN with name "lun0" in the
qtree root /vol/vol1/q0, specify the path as "/vol/vol1/q0/lun0".
Enter LUN path: /vol/edsrvss_01_iscsi/lun0
A LUN can be created with or without space reservations being enabled.
Space reservation guarantees that data writes to that LUN will never
fail.
Do you want the LUN to be space reserved? [y]: n
Size for a LUN is specified in bytes. You can use single-character
multiplier suffixes: b(sectors), k(KB), m(MB), g(GB) or t(TB).
Enter LUN size: 40873m
You can add a comment string to describe the contents of the LUN.
Please type a string (without quotes), or hit ENTER if you don't
want to supply a comment.
Enter comment string: lun for edsrvscdm-01
The LUN will be accessible to an initiator group. You can use an
existing group name, or supply a new name to create a new initiator
group. Enter '?' to see existing initiator group names.
Name of initiator group []: group0
Type of initiator group group0 (FCP/iSCSI) [FCP]: iSCSI
An iSCSI initiator group is a collection of initiator node names.Each
node name can begin with either 'eui.' or 'iqn.' and should be in the
following formats: eui.{EUI-64 address} or iqn.yyyy-mm.{reversed domain
name}:{optional string composed of alphanumeric characters, '-', '.'
and ':'}
Eg: iqn.2001-04.com.acme:storage.tape.sys1.xyz or eui.02004567A425678D
You can separate node names by commas. Enter '?' to display a list of
connected initiators. Hit ENTER when you are done adding node names to
this group.
Enter comma separated nodenames: iqn.1986-03.com.sun:01:00144fa05cee.4ddb6b11
Enter comma separated nodenames:
The initiator group has an associated OS type. The following are
currently supported: solaris, windows, hpux, aix, linux, netware,
vmware, xen or hyper_v.
OS type of initiator group "group0" [solaris]:
The LUN will be accessible to all the initiators in the
initiator group. Enter '?' to display LUNs already in use
by one or more initiators in group "group0".
LUN ID at which initiator group "group0" sees "/vol/edsrvss_01_iscsi/lun0" [0]:
LUN Path : /vol/edsrvss_01_iscsi/lun0
OS Type : solaris
Size : 39.9g (42858446848)
Comment : lun for edsrvscdm-01
Initiator Group : group0
Initiator Group Type : iSCSI
Initiator Group Members : iqn.1986-03.com.sun:01:00144fa05cee.4ddb6b11
Mapped to LUN-ID : 0
Do you want to accept this configuration? [y]:
Tue May 24 10:34:01 BST [lun.map:info]: LUN /vol/edsrvss_01_iscsi/lun0 was mapped to initiator group group0=0
Do you want to create another LUN? [n]:
lun show
/vol/edsrvss_01_iscsi/lun0 39.9g (42858446848) (r/w, online, mapped)
iscsi nodename
iSCSI target nodename: iqn.1992-08.com.netapp:sn.135042183
Set up the Solaris host to find the new lun:
iscsiadm modify discovery --static enable
iscsiadm add static-config iqn.1992-08.com.netapp:sn.135042183,10.21.17.30
Check it appears on the system:
iscsiadm list static-config
Static Configuration Target: iqn.1992-08.com.netapp:sn.135042183,10.21.17.30:3260
iscsiadm list target
Target: iqn.1992-08.com.netapp:sn.135042183
Alias: -
ISID: 4000002a0000
Connections: 0
Rescan the system to check for the new iscsi disk:
devfsadm -Cv -i iscsi
Chris
opps forgot to enable iscsi on the filer! Enabled and all seems to be workin!
Similar Messages
-
Can t get to work tint2 launcher
I'm a beginner in arch linux and i'm trying to figure out why the laucher don't show up in my panel,
i've set up the panel the way i want but i would like to have a few launcher
I've try serveral thing but i can't get it to work,
and chromium.desktop and gparted.desktop do exist in /usr/share/applications/
tks
Here my tint2rc
# TINT2 CONFIG FILE
# horizontal panel
# squared taskbars
# idirae config
# Background definitions
# ID 1
rounded = 0
border_width = 1
background_color = #808080 20
border_color = #ffffff 10
# ID 2 - task active
rounded = 0
border_width = 0
background_color = #feffff 0
border_color = #d8d8d8 0
# ID 3 - task
rounded = 0
border_width = 0
background_color = #F5F5DC 0
border_color = #000000 0
# ID 4
rounded = 0
border_width = 1
background_color = #888888 0
border_color = #ED2323 60
# ID 5 - taskbar
rounded = 0
border_width = 1
background_color = #feffff 10
border_color = #ffffff 10
# ID 6 - active taskbar
rounded = 0
border_width = 1
background_color = #feffff 30
border_color = #ffffff 30
# ID 7 - tooltip
rounded = 3
border_width = 0
background_color = #222222 90
border_color = #222222 90
# ID 8
rounded = 0
border_width = 1
background_color = #888888 20
border_color = #888888 20
# Panel
panel_monitor = all
panel_position = top left horizontal
panel_items = LTSBC
panel_size = 100% 32
panel_margin = 0 1
panel_padding = 3 3
panel_dock = 0
wm_menu = 1
panel_layer = bottom
panel_background_id = 1
# Panel Autohide
autohide = 0
autohide_show_timeout = 0.3
autohide_hide_timeout = 1.5
autohide_height = 6
strut_policy = follow_size
# Taskbar
taskbar_mode = multi_desktop
taskbar_padding = 5 2
taskbar_background_id = 5
taskbar_active_background_id = 6
taskbar_name = 1
taskbar_name_background_id = 0
taskbar_name_active_background_id = 0
taskbar_name_font = Crisp 12
taskbar_name_font_color = #ffffff 30
taskbar_name_active_font_color = #ffffff 50
# Tasks
urgent_nb_of_blink = 20
task_icon = 1
task_text = 0
task_centered = 1
task_maximum_size = 20 20
task_padding = 0 0
task_background_id = 3
task_active_background_id = 2
task_urgent_background_id = 4
task_iconified_background_id = 3
# Task Icons
task_icon_asb = 80 0 0
task_active_icon_asb = 100 0 0
task_urgent_icon_asb = 100 0 0
task_iconified_icon_asb = 80 0 0
# Fonts
task_font = BankGothic Md BT 10
task_font_color = #696969 60
task_active_font_color = #696969 100
task_urgent_font_color = #696969 100
task_iconified_font_color = #696969 60
font_shadow = 0
# Launcher
launcher_icon_theme = elementary
launcher_padding = 2 2
launcher_background_id = 1
launcher_icon_size = 20
# Specify icon theme names with launcher_icon_theme.
# if you have an XSETTINGS manager running (like xfsettingsd), tint2 will follow your current theme.
#launcher_icon_theme = AwOkenWhite
# Each launcher_item_app must be a full path to a .desktop file
launcher_item_app = /usr/share/applications/chromium.desktop
launcher_item_app = /usr/share/applications/gparted.desktop
# Clock
time1_timezone = :/usr/share/zoneinfo/dir/Canada/Eastern
time1_format = %I:%M %p
time1_font = BankGothic Md BT 9
#time2_format = %A, %B %d
#time2_font = Ubuntu-L 7
clock_font_color = #ffffff 80
clock_padding = 5 0
clock_background_id = 5
clock_lclick_command = gsimplecal
#lock_rclick_command =
# System Tray
systray = 1
systray_padding = 2
systray_sort = right2left
systray_background_id = 5
systray_icon_size = 20
systray_icon_asb = 100 0 0
# Tooltips
tooltip = 0
tooltip_padding = 2 2
tooltip_show_timeout = 0.0
tooltip_hide_timeout = 0.0
tooltip_background_id = 7
tooltip_font_color = #ff0000 100
tooltip_font = Roboto-Thin normal 9.0
# Mouse
mouse_middle = none
mouse_right = toggle
mouse_scroll_up = toggle
mouse_scroll_down = iconify
# Battery
battery = 1
battery_hide = never
battery_low_status = 10
battery_low_cmd = notify-send "battery low"
bat1_font = sans 8
bat2_font = sans 6
battery_font_color = #ffffff 80
battery_padding = 5 0
battery_background_id = 5
# End of config
Last edited by jolejo07 (2013-07-05 01:39:25)I've try but can't get it working ether, i've download from Aur but when i'm trying to use the PKGBUILD with makepkg
it telling me
==> ERROR: Cannot find the fakeroot binary required for building as non-root user.
==> ERROR: Cannot find the strip binary required for object file stripping.
Last edited by jolejo07 (2013-07-05 01:45:21) -
I have 2 itunes a/cs one at work and one at home. Both computers are authorised for the 2 a/cs, but I can;t get my work a/c songs to show on my home computer, even though I sign in my work a/c, and I can't get my home songs to show up on the work computer even though I sign in my home a/c. V. frustrating!
Hi,
You will have to manually copy your music. Get a pen-drive big enough to accommodate all your music. And follow these steps:
1. Create a new folder on the pen-drive.
2. Copy the music from your work computer to the folder you just created. It's in (yourhomefolder)>Music>iTunes>iTunes Media>Music if you're using a Mac, or in C:\Users\(yourusername)\Music\iTunes\iTunes Media\Music if you're using Windows.
3. Now on your home computer quit iTunes, and copy your music from work to the "Automatically Add to iTunes" folder in (yourhomefolder)>Music>iTunes>iTunes Media.
4. Start iTunes. It will automatically start to process the files and move them to the appropriate place.
Repeat these steps with your music from home on your work computer. Also I suggest to use only one iTunes account if possible.
Hope it helps
Regards,
Gábor -
How can we get ADFSecurity work when used in OC4J, OID and OAM?
I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal -
In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?
Thank you!When you erased the disk did you select Mac OS Extended Journaled as the format option?
-
My hard drive crashed on my Imac 24" 2009, I installed a new hard drive 2TB and a SSD drive 240 GB and removed the optical drive.
What external DVD can I get to work with the IMac? The Apple super drive is not compatible.Virtually any DVD burner that can connect to your Mac will work. They start at $40 on Amazon.
-
Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It tells Adobe doesnT support my System. But I can not update my old version or activate it. What can I do?
The mac you want to install photoshop cs2 on is running mac os x 10.6.8 Snow Leopard?
(photoshop cs2 won't run on intel macs with mac os x newer than snow leopard)
Did you ever have cs2 installed on this particular computer before?
If the problem is that you already installed cs2, but it won't activate, that's because adobe took the activation servers offline for some older adobe products such as cs2.
You'll need to use the non activation version of cs2 from here and the supplied serial number:
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products -
Can't get Mail working properly
I just got my new MacPro this week, and it's really great except for I can't get Mail working right. I've set up my accounts and a few emails come through, though not many, and because it's been a week since I've been online, there should be many more than that. Also, I can't send any emails at all, no matter what I do. They will eventually go into my Sent box, but I've been sending them to myself to see if it's working, and they never come through. I spent an hour on the phone yesterday with the tech support for my ISP, and they told me that I'd have to talk to the Apple techs because they didn't have current info for *Mail 3.1*, the version I have, that the latest they had was for 2.something. So I called the Apple tech support and spent 2 hours on the phone with them, and they weren't able to help me get it going correctly either. It keeps giving me error messages such as Connection Failed, or Unable to Receive Mail, saying "there may be a problem with the mail server or network" and that "the connection to the server on ... port has timed out." I'm on DSL and am always online, so I know it's not the internet connection that's the problem. Can anybody give me some advice on what I should try? Any help will be gratefully appreciated!
Is your ISP Verizon, Demon, or Glocalnet, then it might be Apples biggest Leopard Bug in conjunction with these ISP:s POP-servers.
The one that randomly changes the settings in "advanced" from "password" to "APOP".
The visual result of this bug is that you will get a popup-box where Mail asks you to enter your password. (Which is useless entering, since the preference settings are changed.)
My advice counts only when you are supposed to use "password" as the correct setting in "Advanced" and in conjunction with some ISP:s.
Michael -
Can't get webutil working on AS
Hi All,
As topic, I can't get webutil working on the application server. I can run individual forms or sessions that do not utilise webutil. As soon as I have baseHTMLjinitiator/baseHTMLjpi/baseHTML defined in the bit of the formsweb.cfg that I am using, I get this problem. The webutiljini.htm etc are located in the forms/server directory as they should be.
I've got it working fine on my 10.1.2 developer suite XP platform.
I've been trying without success on the App Server. Version 10.1.2 under Win2003
I have been right through the installation instructions several time trying to see what I have missed.
I have installed version 1.0.6 of webutil and version 1.8 of jacob.
I try and run the wu_test_106 form, and all I get is "Applet Started" at the bottom of the browser window, and a blank browser window.
My URL is
http://10.64.125.51:7778/forms/frmservlet?config=webutil1
The config in the formsweb.cfg is:
[webutil1]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=generic
form=wu_test_106.fmx
width=100%
height=100%
separateFrame=True
The other parameters are default. If I try a different form name it makes no difference.
I've done the other configuration stuff, default.env, signing jar files, etc.
The java console just shows:
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\griggto01
Proxy Configuration: Manual Configuration
Proxy:
Proxy Overrides:
JAR cache enabled
Location: C:\Documents and Settings\griggto01\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://10.64.125.51:7778/forms/java/frmwebutil.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 1.0.6
Thanks for your help.
TonyHi Tony,
Form your post it doesn't look like jacob.jar is being loaded. Can you confirm that you have the following files in the <ORACLE_AS>/forms directory:
java\
jacob.jar
frmwebutil.jar
webutil\
d2kwut60.dll
jacob.dllAlso open up your default.env file and check that
ORACLE_HOME -- is correct
FORMS_PATH -- has the path where wu_test_106.fmx is located
WEBUTIL_CONFIG -- is correct (I've experienced what you describe when this path was invalid)
CLASSPATH -- contains frmwebutil.jar
Regards
Tom Casserly -
Can't get my work email to load on my new phone
I can't get my work email onto my Droid X. Anyone know the trick?
Carl3 wrote:
I can't get my work email onto my Droid X. Anyone know the trick?
First quesiton I have is do you have authorization to access your work email from your Droid X? Just knowing the email address and password is enough for you to get your personal email, but your employer must approve remote access.
If it's okay with your employer, you may also need to know the incoming and outgoing email server addresses, the port number, and your username on your employer's email server. If you're not sure what they are, check with your IT admin AFTER you get confirmation that it's okay to get your email. -
Australia Post Shipping - Can't get to work
Hi,
I have read all the online support docs I can find and I just can't get Australia Post Shipping to work on our site for international orders.
Everywhere it says:
Choose your shipping provider
Enter your account details
Your customers see real time shipping costs!
But Australia Post selection doesn't let us enter account details - does anyone know where I enter them?
(see image at bottom)
And after I allocated sizing, weights etc to every product it doesn't even look like it even works:
(see how there are no options to select)
Does anyone have any ideas on how to get it to actually work? I can't imagine BC would role something like this out if it didn't even work but from all my googling I can't see that anyone actually uses it (or at least comments on using it!)
Would love any helpI've try but can't get it working ether, i've download from Aur but when i'm trying to use the PKGBUILD with makepkg
it telling me
==> ERROR: Cannot find the fakeroot binary required for building as non-root user.
==> ERROR: Cannot find the strip binary required for object file stripping.
Last edited by jolejo07 (2013-07-05 01:45:21) -
My iMessage and FaceTime doesn't work. how can i get it working?
my iMessage and FaceTime doesn't work. how can i get it working?
Without more information such as:
- what happens when your try?
- DId it work before and other things
all I can suggest is:
iOS: Troubleshooting FaceTime
iOS: Troubleshooting Messages -
Flex 4 - Can not get ADG working
Hello,
I have just downloaded flex 4 SDK (flex_sdk_4.0.0.14159_mpl) and Flash Builder 4.
I have created a test prroject and can not get it working with Advanced Data Grids.
Here is my set up: Created Project called Test, this contains one MXML file that contains an Advanced Data Grid:
<fx:Script>
<![CDATA[
import mx.collections.HierarchicalData;
[Bindable] private var _test:HierarchicalData;
]]>
</fx:Script>
<mx:AdvancedDataGrid id="test" dataProvider="{_test}">
<mx:columns>
<mx:AdvancedDataGridColumn headerText="COL_A" />
<mx:AdvancedDataGridColumn headerText="COL_B" />
<mx:AdvancedDataGridColumn headerText="COL_C" />
</mx:columns>
</mx:AdvancedDataGrid>
This works Okay. I then include a libary into the project, the libary, also built with the same SDK, contains a class that contains nothing but one single method that does nothing:
<mx:Canvas xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
width="100%" height="100%">
<fx:Script>
<![CDATA[
import mx.controls.advancedDataGridClasses.AdvancedDataGridColumn;
private function test(col:AdvancedDataGridColumn):void { }
]]>
</fx:Script>
</mx:Canvas>
Launcing now causes the error
TypeError: Error #1007: Instantiation attempted on a non-constructor.
at mx.controls::AdvancedDataGridBaseEx/getSeparator()[E:\dev\4.0.0\frameworks\projects\datav isualization\src\mx\controls\AdvancedDataGridBaseEx.as:4618]
at mx.controls::AdvancedDataGridBaseEx/createHeaderSeparators()[E:\dev\4.0.0\frameworks\proj ects\datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4660]
at mx.controls::AdvancedDataGrid/createHeaderSeparators()[E:\dev\4.0.0\frameworks\projects\d atavisualization\src\mx\controls\AdvancedDataGrid.as:2428]
at mx.controls::AdvancedDataGridBaseEx/drawSeparators()[E:\dev\4.0.0\frameworks\projects\dat avisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4574]
at mx.controls::AdvancedDataGridBaseEx/updateDisplayList()[E:\dev\4.0.0\frameworks\projects\ datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:2119]
at mx.controls::AdvancedDataGrid/updateDisplayList()[E:\dev\4.0.0\frameworks\projects\datavi sualization\src\mx\controls\AdvancedDataGrid.as:2899]
at mx.controls.listClasses::AdvancedListBase/validateDisplayList()[E:\dev\4.0.0\frameworks\p rojects\datavisualization\src\mx\controls\listClasses\AdvancedListBase.as:3468]
at mx.managers::LayoutManager/validateDisplayList()[E:\dev\4.0.0\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:663]
at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.0.0\frameworks\projects\frame work\src\mx\managers\LayoutManager.as:718]
at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.0.0\frameworks\projec ts\framework\src\mx\managers\LayoutManager.as:1072]
Removing the method in the libary project alivates the problem. But I can not see why this is a problem in the first place!!??!?!?!?!?!?!?
Can anyone help. this is really weird.I'm getting the same error. This is due to a bug in AdvancedDataGridBaseEx. The offending code is:
var headerSeparatorClass:Class =
getStyle("headerSeparatorSkin");
sepSkin = new headerSeparatorClass();
if getStyle returns null then you will be trying to instantiate headerSeparatorClass is going to cause the "Instantiation attempted on a non-constructor" error.
Apparently someone thought that the headerSeparatorSkin would never be null. -
My itunes has stopped responding how can I get it working again
My itunes has stopped responding how can I get it working again?
I have a related issue (I think, hard to know for sure from the short frustrated post above).
Since the last update of iTunes (11.0.5), it kind of freezes while checking for and downloading new podcasts. Processor load goes to 100% (sometimes above! figure from Swedish OSX "Aktivitetskontroll" which I can imagine is something like "Activity Control" or "Activity Manager" in English OSX) and stays there for a few minutes, 3-5 minutes is common. During that time the mouse pointer turns into a spinning ball when moved above iTunes. Other apps work ok meanwhile. (Four processors)
Have a fixed connection to the internet, which I have tested while iTunes is frozen. We acheive above 100 Mbit/s downstream, 20 Mbit/s upstream, so the connection shouldn't be the problem.
Any ideas on what to do?
iTunes 11.0.5 (Swedish)
MacOSX 10.8.4 (Swedish)
iMac 27", late 2009 http://support.apple.com/kb/SP576 -
I have the Photoshop Photography Program and now every time I try open Photoshop CC it asks me for a Serial Number. It keeps saying my trial period has ended. How can I get this working since Adobe doesn't issue Serial Numbers for CC.
Jodie84,
I have just checked your account and found that you indeed have bought a Creative Cloud for Teams subscription but you have assigned the single seat to another user hence you ( If you are using your own Adobe ID ) are getting the trial error message.
Two options : Either reassign the seat to your self or add an additional seat and invite your self in the same Team.
Cheers,
Kartikay Sharma
Maybe you are looking for
-
TNS:No listener error: Please help me
Hi all, I have installed Oracle 10g in my laptop.few weeks back i was able to work on that. But today when i tried to connect to my database(im using Toad) i am getting TNS:No Listener error. I checked in Listener.ORA file also. All seems to be fine.
-
Dynamic resizing in JDialog using setSize not working properly
Hi, I have a dialog in which i have two radio buttons. As i click on other radio button the size of the dialog should change. I did so using setSize. As i change the size from smaller dialog to a bigger one then newly created portion is not painted p
-
For reasons unknown to me, my brand new ipod touch keeps activating Voice Control. I am not pressing the home button or touching any controls. I can be doing nothing with it and it just kicks on, sometimes interrupting what is already going on (like
-
Monitoring Cisco UCS Manager via HP System Information Manager 7.1 (SIM)
I am working with a customer to configure HP System Information Manager 7.1 (SIM) to monitor their Cisco UCS Manager. The customer is looking to monitor the following: - CPU Utilization on manager, blades, servers, etc... - Memory utilization - Netwo
-
Im using captivate 7 and when editing a slide element such as atext caption, image or anything really, I cannot copy and paste an item. It makes a sound when I try command C but does nothing. Right click shows options only for slide but nothing for c