Can't get tomoyo (AUR repo linux-tomoyo) to work

Hey there,
I've got a little problem with tomoyo.
I first tried to install the tomoyo-tools -> Missing dependency: linux-tomoyo.
Then I read that tomoyo is already inbuilt in Linux kernel, but disabled by default.
So I tried to change this setting - made my own custom kernel.. Wow, til I found a more or less easy way that worked, by following this guide, hours passed by. So I made it, added the single line to the config.x86_64 (I read this should be enough somewhere on the official tomoyo site) and to be safe, to the config file too: CONFIG_SECURITY_TOMOYO=y
After completing the makepkg (I didn't choose tomoyo as default security system), I installed it, said my bootloader what to do (first without any special APPENDS, then, because this didnt work, with this appended: "security=tomoyo TOMOYO_trigger=/usr/lib/systemd/systemd". With this appends, the custom kernel didn't start anymore (don't know the exact error anymore, but it was not very informative and I used an easier solution either way). So I removed the new kernel and searched further... Until I found an illusive very easy solution - the AUR linux-tomoyo... Why I didn't look earlier for this AUR?
Well this AUR tarball downloaded, bla bla.. But installation didnt work too. Everything was fine, extracting sources did work, but then...
================================================
==> Begin prepare()...
patching file Documentation/stable_kernel_rules.txt
patching file Makefile
patching file arch/x86/boot/compressed/efi_stub_64.S
The next patch would create the file arch/x86/boot/compressed/efi_thunk_64.S,
which already exists! Assume -R? [n]
Apply anyway? [n]
Skipping patch.
1 out of 1 hunk ignored
patching file arch/x86/include/asm/spinlock.h
patching file tools/perf/util/cloexec.c
==> ERROR: An error occured in prepare().
Aborting...
================================================
So, I didn't found anything to this topic anymore and can't help myself now. I hope you have some hints for me?
Background: I wanted to use skype, read the wiki page and found infos about securing skype. Sounded good. Among others, tomoyo seemed really nice...
Of course, it would be enough, to secure skype theoretically, but now I want tomoyo to work
Thank you for help!
xy

Hi,
BI 4.0 mobile comes integrated with BI 4.0 Enterprise.
So there would be no seperate download for the same.
Also, BO on linux and mobile on windows will cause in consistency. This has to be avoided.
Also, if you are using BB without BES servers, then you need to have a MDAS configured for the same. This will replicate your BES server, as a simulator BB will communicate to the servers thorugh teh MDAS servers.
Regards,
Atul

Similar Messages

What app can i get to have my dell v515w printer work with my iMac

what app can i get to have my dell v515w printer work with my iMac

Dell has some really great drivers -- for Windows and Linux. But none for any version of Mac OS X.
LinuxPrinting.org does not llist that as a printer supported by any of their drivers -- not even badly supported.

How can I get my HP Officejet Pro 8100 to work. I had HP on the phone for over two hours and thought it was fixed. Now it just will not print at all.

How can I get my HP Officejet Pro 8100 to work.
I'm using an iMac (21.5-inch, Late 2013) running Yosemite. I spent hours on the phone with HP who did their best and thought they had solved the problem Now it has stopped printing completely. Just says 'idle' or' connecting to printer' but never does.

Greetings paulr.paulr,
Welcome to the Apple Support Communities!
I understand that you are unable to print from your Mac running Yosemite on your HP Officejet Pro 8100. I know that printer issues can be very frustrating, but I believe the information in the attached article will be able to assist you. I would suggest reading over and systematically working your way through the suggested troubleshooting steps located in the following article. If any issues arise as you work your way through the steps, or if you work your way completely to the end and reset the printing system and the issue continues, please let me know.
OS X Yosemite: Printing troubleshooting
Cheers,
Joe

I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!

I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!!!

You have posted to the iTunes Match forum, which your question does not seem to be related to. Is your question concerning iTunes Match or syncing with iTunes via USB?

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I am talking about the Ver 3 download link that came with the purchase email.
That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
/Applications/Aperture.app
/Library/Application Support/Aperture/
~/Library/Application Support/Aperture/
Leonie

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
Please anybody out there that can help!!!??

Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

I can not get the flash player plug in to work with Internet Explorer

I can not get the flash player plug in to work with Internet Explorer

Zoltan71 wrote:
I just bought this computer. My Internet Explorer is version 11.0.1
I have the box checked to Install new version automatically, but it has not done any upgrading.
I can't get the computer to update anything as far as I can see.
The flash plug in does work with the Crome browser but it will not work with Internet explorer.
I looked in the manage add-ons and it says enabled.
I also went into the safety tab and deselected
Active X filtering.
Restarted and still does not work.
I need help.....
Chrome uses a different and separate plug-in.
There are things about IE you need to know, especially 11. Specifically:
"User-Agent Strings"
That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
Microsoft has no plans to "fix" the mess they've created because they think it's a great idea to block you out of the websites you visit.
They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

I've just installed OS 10.6.8. Now I can't get my HP LaserJet 2200 printer to work.

I've just installed OS 10.6.8. Now I can't get my HP LaserJet 2200 printer to work.

Check out the following & do the necessary:
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
HP Support

HT5701 Downloaded Safari 6.0.4 and my software is not up to date to run it. I can not get the old version of Safari to work again.

Downloaded Safari 6.0.4 and my software is not up to date to run it. I can not get the old version of Safari to work again.

Open  > About this Mac, and tell us what OS X version you have. If it's 10.8, reinstall OS X 10.8.3 > http://support.apple.com/kb/DL1640
If, after reinstalling the update, you still can't use Safari, hold Command and R keys while your computer is starting and reinstall Lion or Mountain Lion

I can't get the convert to word command to work?

How do I get the Convert to Word function to work?

The pane next to the document has a space for the file name and the target conversion (Microsoft Word) and a conversion button. I press it and nothing happens, and no inquiry comes up asking for my Acrobat user name and password. Just no action. I I have Windows 7.
In a message dated 08/18/14 12:14:13 Pacific Daylight Time, [email protected] writes:
I can't get the convert to word command to work?
created by MichaelKazlow in Creating, Editing & Exporting PDFs - View the full discussion
What happens when you try? Error Messages? What version of Acrobat? What OS? Does the document have real text or is it a scan which is a picture of text?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6651867#6651867
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Where can I get a Mac CS2 or 3 that works on an Intel computer?

Where can I get a Mac CS2 or 3 that works on an Intel computer? My CS2 on a G4 doesn't work.
Björn

@Eugene – CS2 should install on Macs with OSX up to version 10.6.8. An older OS component is required: "Rosetta". With OS X 10.7 and above the install is not possible, because "Rosetta" is no longer supported in 10.7 and above.
Uwe

Can we get reimbursed for apps that do not work

Can I get reimbursed for apps that do not work?

Hi...
You can contact iTunes support here and see if they will make an exception:
http://www.apple.com/support/itunes/contact/
They usually respond within 24 hours.
Hope this helps.

Can't get "Clear Current Marker" Keyboard Shortcut to work...

HI all,
I can't get the "clear current marker" keyboard to work. The keys are: "Crtl + Shift + 0".
I assume i have to simultaneously press the "control, shift and zero" keys - right?

Averdahl,
I didn't just fall off the turnip truck duuude Done all that been all there. Still no joy.
However, you'll be happy to know that Ctrl+0 (clear sequence marker) does work!
Anyway, i'm posting in another thread, another discovered annoyance shortly.

Can't get tomoyo (AUR repo linux-tomoyo) to work

Similar Messages

Maybe you are looking for