Can't get Xbox 360 Media Center Extender to work

I am using Windows 7 Ultimate x64.  This is a retail copy.  I had previously set up Windows Media Center and successfully set up my Xbox 360 as a Media Center Extender.
After a long hiatus of using Windows Media Center, I went to watch a movie in my media library through my Xbox 360.  It would appear to initially connect and then show the Windows Media Center loading screen and say "Contacting..."  After about 30 seconds, it would display an error asking me to make sure my Windows Media Center PC is turned on (it is).  I ran the Windows Media Center network test in the Xbox 360 and it tested fine.
I attempted to delete the Media Center Extender in WMC and set it up again, but it always fails with an error "An error was encountered while configuring your computer for use with this Extender" at the part where it says "Configuring your Extender".
I looked in the Event Viewer under the Media Center section and found event ID 543:
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          3/3/2010 10:13:20 PM
Event ID:      543
Task Category: Configuration
Level:         Error
Keywords:     
User:          WILL7\swsander
Computer:      WILL7
Description:
Media Center Extender Setup failed to create the PnP device with ID: uuid:10000000-0000-0000-0200-00125AC6E86F (timed out after 120000ms).
Error: Element not found.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>543</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-03-04T03:13:20.805493500Z" />
    <EventRecordID>333</EventRecordID>
    <Correlation />
    <Execution ProcessID="9408" ThreadID="9760" />
    <Channel>Media Center</Channel>
    <Computer>WILL7</Computer>
    <Security UserID="S-1-5-21-2626302321-2836749625-3976135476-1001" />
  </System>
  <EventData>
    <Data Name="ID">uuid:10000000-0000-0000-0200-00125AC6E86F</Data>
    <Data Name="Timeout">120000</Data>
    <Data Name="Error">-2147023728</Data>
  </EventData>
</Event>
I also tried turning off the Windows firewall on the Windows Media Center PC, but this had no effect on the outcome.  I also tried deleting the Microsoft Windows Media Center Extender Host certificate and restarting the Network List Service, but these steps to did nothing to fix the issue.
I am using the same computer with the same NIC with the same Ethernet cable with the same SOHO router (Linksys WRT54GL) with the same Xbox 360.  Any advice would be welcome at this point.

Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:51:55 PM
Event ID:      592
Task Category: Configuration
Level:         Warning
Keywords:     
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Your Media Center Extender was set up successfully, but failed to connect (timed out after 180000ms).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>592</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:51:55.176149000Z" />
    <EventRecordID>428</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="15676" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
  </System>
  <EventData>
    <Data Name="Timeout">180000</Data>
  </EventData>
</Event>
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:48:54 PM
Event ID:      506
Task Category: Configuration
Level:         Information
Keywords:     
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Media Center Extender account Mcx1-ERIC-PC has been created for the Extender with ID: uuid:10000000-0000-0000-0200-001DD847D7F4.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>506</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:48:54.615896200Z" />
    <EventRecordID>427</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="9024" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
  </System>
  <EventData>
    <Data Name="User">Mcx1-ERIC-PC</Data>
    <Data Name="ID">uuid:10000000-0000-0000-0200-001DD847D7F4</Data>
  </EventData>
</Event>
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:48:49 PM
Event ID:      500
Task Category: Configuration
Level:         Information
Keywords:     
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Media Center Extender Xbox 360 Media Center Extender 'uuid:10000000-0000-0000-0200-001DD847D7F4' discovered at address 192.168.1.2.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>500</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:48:49.155888500Z" />
    <EventRecordID>426</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="9024" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
  </System>
  <EventData>
    <Data Name="DeviceName">Xbox 360 Media Center Extender</Data>
    <Data Name="ID">uuid:10000000-0000-0000-0200-001DD847D7F4</Data>
    <Data Name="Address">192.168.1.2</Data>
  </EventData>
</Event>
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:48:36 PM
Event ID:      573
Task Category: Configuration
Level:         Information
Keywords:     
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Media Center Extender found:
ID: uuid:10000000-0000-0000-0200-001DD847D7F4
IP Address: 192.168.1.2
Interface GUID: {d8f53a92-8e85-4d1e-bde0-ba30d9b14449}
NHED type: X02
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>573</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:48:36.095870300Z" />
    <EventRecordID>425</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="15608" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
  </System>
  <EventData>
    <Data Name="ID">uuid:10000000-0000-0000-0200-001DD847D7F4</Data>
    <Data Name="Address">192.168.1.2</Data>
    <Data Name="GUID">{d8f53a92-8e85-4d1e-bde0-ba30d9b14449}</Data>
    <Data Name="NhedType">X02</Data>
  </EventData>
</Event>
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:48:35 PM
Event ID:      581
Task Category: Configuration
Level:         Information
Keywords:     
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Media Center Extender Setup has determined that the Windows Firewall is enabled in the Home profile.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>581</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:48:35.555869500Z" />
    <EventRecordID>424</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="14828" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
  </System>
  <EventData>
  </EventData>
</Event>
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:48:35 PM
Event ID:      575
Task Category: Configuration
Level:         Information
Keywords:     
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Media Center Extender Setup started with the following settings:
Affiliation code: 159
Username: Eric
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>575</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:48:35.485869400Z" />
    <EventRecordID>423</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="14828" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
  </System>
  <EventData>
    <Data Name="AffCode">159</Data>
    <Data Name="User">Eric</Data>
  </EventData>
</Event>

Similar Messages

  • Can only get XBOX 360 to work by unplugging and then plugging in ethernet cable?

    I have 2 desktop computers, 1 laptop computer and 1 Xbox 360 using this WRT54GS ver 6 router.  The desktops and the xbox are wired and the laptop is wireless.  I replaced my old linksys router which I never had a problem with for this one.  If my desktop computer is turned off and I turn on my XBOX, the router does not recognize the Xbox.  I mean the XBOX is plugged into port 3 and that light does not flash on the router.  Now, if I turn on my computer and then turn on my xbox, it still doesn't work.  If I turn on my computer, turn on my XBOX and then unplug the xbox ethernet cable from the back of the router and then plug it back in, then the router recognizes it and it works great.  I have had 2 chat sessions and I phone session with linksys and they cannot figure it out.  They had me go into my xbox and set a static IP address, gateway and DNS.  Then she had me go into forward a few ports on the router.  I never had to do any of this stuff with the old router by the way.  The last guy I talked to on the phone said I need to figure out a way to turn off "MAC Address cloning" in the xbox.  I checked  and there is no way to do this, so I think he is wrong about this.  Does anyone have ANY ideas as to why this problem is happening? 

    I had the same problem and I just typed my settings in manually on my xbox 360's network settings.(IP, and DNS).
    Message Edited by JustaGamer on 02-03-200703:02 PM

  • E4200 -- no sharing, no xbox 360 media extender

    Problem:  Shares don't work on my network from win7 box (trying to access these from a wd hd tv live plus), can't use xbox 360 as a windows media extender from win7 box, Media sharing from Windows Media Player from win7 box doesn't work (trying to access these from a wd hd tv live plus and xbox 360).  
    Note...if I attach a hard drive to the router, I can share from the hard drive attached to the router and use it as uPnP device.
    This linksys replaced a netgear router.  That is the only thing that has changed in the network configuration.  All of the sharing and xbox 360 windows media extender worked when I had the netgear.
    I have tried removing the xbox360 as an extender and readding it.  I have tried changing the multicast setting.
    I tried calling linksys support and they didn't know how to help.
    Gaming works fine through the xbox 360.  Internet access is great on the win 7 box, hd tv live plus, xbox 360, and wii--MUCH better than the netgear, which is why I want to make this work

    Disable Network sharing on all the computers/devices. Restart all the computers/devices. Enable network sharing again on all the computer and devices. Make sure that all the computers and devices are in the same work group. if there is any firewall/Anti-virus installed on your computer then disable it or turn it off and see if that works.

  • Windows 7 as a media center extender?

    I have a Vista Ultimate box that I use as my media center. I have a notebook with Windows 7 installed on it that I would like to use as a media center extender. Is this possible?
    For the life of me I can't seem to figure it out. My Vista machine hasn't given me the notice of a new media center PC on the network like it does when a new Vista media center shows up...
    Appreciate any guidance.... 

    Hi there, I asked the following question over at the Windows 7 beta QnA and got silence, and from what I am reading here, I thought perhaps you could answer. This may be an odd place to post new questions (in mid-discussion) but it seems on topic, and I didn't want to waste readers' time by posting a new topic.
    Will Windows 7 stream to another PC or "Play To" recorded TV files that were recorded using WMC?Will
    other Windows 7, Windows Vista, or Windows XP PCs be able to play
    recorded TV streams from a Windows 7 machine over a home network?
    If
    so, will those PCs be able to get all the show info such as title, time
    and date, episode summary, etc in order to navigate and choose the
    correct recorded TV episode?
    Another, similar question is will Windows
    7 be able to act as a software-based media center extender for another
    machine (Windows 7, Vista Home Premium or Ultimate, or XP MCE) running
    Windows Media Center?
    One more question is...is any of this possible in Windows Vista? I have one PC with Vista that I use as my media center/DVR and my other systems in the house are running Xp or Mac O/S. I can share and then access the recorded TV folder via my network and play the files on the other systems in the house (yes, even the Mac) but I don't get any of the fantastic WMC front-end UI, which turns out to be more than just a pretty wrapper slapped on it, because it also gives specific episode names, recording dates, and episode summaries, and groups the episodes per series(if desired). When combing the files via a network share, the naming convention is all convoluted and the experience is not very intuitive. I could use an extender such as the xbox 360 to watch this stuff on tv, but it is more convenient to watching on my computers.

  • Inspire 5200 5.1 - Can it run Xbox 360??

    I have the Inspire 5200 5.1 system on my PC.
    I can run the Xbox 360 through the PC by running the audio outputs through the 'Line In' port on my sound card. This is probably not 5.1 but it is good enough for what little I use the Xbox.
    However I would lke to use the Inspire 5200 direct to the Xbox without going through the PC if it is possible WITHOUT an expensive decoder.
    Is the Inspire capable of doing this?
    Is it a stand alone speaker system or does it need power from another source?
    If I hook the audio out from the Xbox into the 'Front' input on 'Audio Input' will this work?

    This should work as the 5200s are powered speakers. However you'll need a phonox2 to stereo mini-plug adapter so you can plug it into your speakers (the green jack on the speakers (Front L/R)).

  • How can i get rid of the cents in my account ?

    how can i get rid of the cents in my account ?

    If you want to change countries and can't spend it then you can try contacting iTunes support and ask them if they can remove the balance so that you can do so : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I can't get Window's Media Player to recognize my new ipod shuffle.  Does anyone have a solution/, I can't get Window's Media Player to recognize my new ipod shuffle.  Does anyone have a solution?

    I can't get Window's Media Player to "recognize" my new ipod shuffle.  Does anyone have a solution?  When I pull the ipod shuffle up in Devices and Printers, it says it needs Troubleshooting, but the Troubleshooting provides no solution.

    Windows Media Player?  As far as I know, that won't work.  You need to install iTunes
    http://www.apple.com/itunes/
    That will install the software you need to use your shuffle with your computer.

  • I can't get the add media to work when trying to upload to facebook, any suggestions?

    I can't get the add media button to add my photos so I can upload them to facebook, any suggestions?

    yes.  After wasting a couple of hours trying to get it to work - got on to Apple support.  After over an hour of them trying everything we decided to bin the app. and download another.  You have to make sure it's deleted from the trash (27,000 files) before apple store will recognize the purchase and the fact it is not on your system.
    Download worked perfect.  But there's more.
    Whilst trying to doing something unrelated this morning my system froze so I had to press on button to get a forced re-start.  Just produced three more videos - not working again!! Frustrated from Somerset Looks like I'm going to have to do this all over again.

  • How can i get rid off 16 cents so i can change country ?

    How can i get rid off 16 cents, so i can change country ?

    Try contacting iTunes support and ask if they can remove the balance from your account : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

  • Windows Media Center Has Stopped Working...

    Since I first bought my Toshiba Satellite P305-S89151, I've received "Media Center has stopped working...A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available" responses.  When I click on the Close Program dialogue box, I'm provided with an MS KB (KB 947464) article pop-up that is suppose to help me resolve the problem. IT DOESN'T!!! When I click-thru on the KB link, the MS Support site says they can't find their own KB page!  Does anyone know how to repair this Media Center problem on Vista Home Premium (64bit)?
    Thank you!
    [email protected]

    Satellite P305-S89151 
    Media Center has stopped working.
    A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available
    I wonder if this one applies.
    Error message when you repeatedly use a shortcut within a brief time frame to start the Picture Libr...
    -Jerry

  • How can I get my HP Officejet Pro 8100 to work. I had HP  on the phone for over two hours and thought it was fixed. Now it just will not print at all.

    How can I get my HP Officejet Pro 8100 to work.
    I'm using an  iMac (21.5-inch, Late 2013) running Yosemite. I spent hours on the phone with HP who did their best and thought they had solved the problem Now it has stopped printing completely. Just says 'idle' or' connecting to printer' but never does.

    Greetings paulr.paulr,
    Welcome to the Apple Support Communities!
    I understand that you are unable to print from your Mac running Yosemite on your HP Officejet Pro 8100. I know that printer issues can be very frustrating, but I believe the information in the attached article will be able to assist you. I would suggest reading over and systematically working your way through the suggested troubleshooting steps located in the following article. If any issues arise as you work your way through the steps, or if you work your way completely to the end and reset the printing system and the issue continues, please let me know. 
    OS X Yosemite: Printing troubleshooting
    Cheers,
    Joe

  • I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!

    I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!!!

    You have posted to the iTunes Match forum, which your question does not seem to be related to. Is your question concerning iTunes Match or syncing with iTunes via USB?

  • I recently bought a new macbook pro and set it up using the migration assistant and my mac mini.  I can't get the text message forwarding feature to work with both computers.

    I recently bought a new macbook pro and set it up using the migration assistant from my mac mini.  I can't get the text message forwarding feature to work with both computers.  It keeps saying that I only have 2 devices setup, my iPad and my macbook pro.  When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device.  I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer.  Any ideas?

    Thanks, Sig.
    The old computer is a 2.6 Ghz Intel Core 2 Duo
    The new one is a 2.3 GHz intel core i7
    In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem.  Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page.  Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
    If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them. 
    (I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

  • I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

    I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

    I am talking about the Ver 3 download link that came with the purchase email.
    That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
    Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
    If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
    /Applications/Aperture.app
    /Library/Application Support/Aperture/
    ~/Library/Application Support/Aperture/
    Leonie

  • I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green

    I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
    Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
    Please anybody out there that can help!!!??

    Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.

Maybe you are looking for

  • Do I must use EJB if I put a web application on NT+IIS+JRun

    I wrote a web application(JSP+JavaBean+Microsoft Access Database), it runs well on windows98/me+Apache+JRun developer version(net work). but when I put it on the internet by using ISP's Server(NT 5.0+ IIS+JRun), It does not work well. when click on a

  • Cannot regain access to external drives.

    The USB external hard drives attached to my Mac Pro, which is running 10.6.8, are not allowing me access, saying I do not have permission. There is a lock on the desktop icon for each of them. I tried changing them in the Get Info box but all permiss

  • Document in status not posted' trip cannot be changed"

    Dear Gurus, I have a situation here that,  iam unable to change the expenses, iam getting the following message. "document in status not posted' trip cannot be changed" The Posting run was created for this trip, which was  accidentally deleted,  from

  • IWeb O8 Won't Publis After Upgrade- Help Please

    Hey All, So I finally upgraded to iWeb 08 and now my sites won't publish at all. Every time I select Publish or Publish All it goes through the paces connects then goes through updating all of the pages and then reaches the publishing in the backgrou

  • IPad volume

    Why do I suddenly have no audio on my iPad?  Did downloading iOS 7 have anything to do with it?  I've gone into every setting every tutorial has suggested and have set the slide switch on the side to "mute" then switched it on and off.  So far, nothi