Can't hide TACACS key in the config

I have recently enable TACACS in my Cisco route/switches but when I do show run I can see the tacacs key, how do I hide it?
Thanks.
tacacs-server host x.x.x.x key cisco123

Nawaz
The ability to "hide" the TACACS key is dependent on which version of code you are running. It is accomplished through the service password-encryption command. Older versions of code would encrypt only the line passwords, enable password. In more recent versions of code additional passwords are protected by this command. My experience is that 12.3T and 12.4 have included the TACACS key as one to protect (there could be other versions that do, but these are what I have experience with). Older versions of code do not protect the TACACS key. If you attempt to input the key with the "7" parameter it will not produce an encrypted key.
If you want the TACACS key hidden or encrypted then you should plan on upgrading the IOS version.
HTH
Rick

Similar Messages

  • How can I hide or make visible the fields at the order and at the delivery?

    How can I hide or make visible the fields at the order and at the delivery?
    Thanks in advance.

    Hi,
    For sales order, use user exit :
    MV45AFZZ and FORM userexit_field_modification.
    For deliveries, use BADI :
    LE_SHP_DELIVERY_PROC (see with Tcode SE18) and method CHANGE_FIELD_ATTRIBUTES.
    Create implementation in ref to this badi with Tcode SE19.
    Regards,
    Lionel

  • Read-only access (hide a portion of the config)

    Is there a way to alloww read-only access to only a portion of the config.  I have customers who are requesting read-only access, but i don't want them seeing portions of the config. 
    Any help or suggestions would be greatly appreciated.  Thanks

    If they have an enable level login they will be able to see the whole configuration (absent encrypted passwords assuming you're using service password-encryption).
    You can make logins more granular and prevent customers from having, say, the ability to execute arbitrary commands such as "show run". You could, for instance setup a given user to only be alllowed to execute "show interface status" etc. NX-OS has this ability pretty much 'baked-in'. For IOS-based systems, a bit more work is required.
    Here is a guide for how to do it if you use TACACS for AAA:
    https://supportforums.cisco.com/docs/DOC-15765
    If you're using local authentication, you can do similar things using either privilege levels or cli views:
    http://www.cisco.com/en/US/docs/ios/12_2t/12_2t13/feature/guide/ftprienh.html
    http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtclivws.html
    http://www.networkworld.com/community/node/57553
    Hope this helps.

  • How can I hide primary key column in BC4J form

    I have populated a primary key with dbsequence and how can I hide it on the form. It is populated in the DB by a trigger.

    I have populated a primary key with dbsequence and how can I hide it on the form. It is populated in the DB by a trigger. To hide it, edit the attribute using attribute-editor that you bring up by double-clicking on the attribute in the "StructurePane" .
    Then go to control-hints panel and mark the attribute setting for Display = Hide.
    Then UI wizards will not add the attribute into generated panels.
    However once you have UI generated, this hint is no more used.

  • Can we hide 'profit margin' in the sales order

    I looked in the config, but I did not find any control that will hide the profit margin on the sales order.
    Does anybody know if the only way to do this is to actually take off the 'profit margin' from the pricing procedure?
    Thanks
    Bindu

    Hi bindu,
       if u want to hide profit margin in sales order ,is it captured thru some condition type? if yes then use alternative condition base formula in pricing procedure with either 27 or 56 .if business logic doesnot suit with this std routine then u can write ur own routine in VOFM transaction with abapper's help.
      it is cent % possible to do,and this is the only way also.
    if you also do not want to show this PM in invoice output then untick printing option in pricing procedure for this condition type.
      please reward if this helps !!!!!!

  • TS1297 My numbers / symbols 1-9 / !-(  do not work on my wireless key pad.  I have tried the resolution information but, still no response with those keys only.  I can only type these keys with the keyboard viewer.  Any suggestions?

    My numbers & symbols 1-9 / !-(  do not work on my wireless key pad.  I have tried the resolution information but, still no response with those keys only.  I can type these keys with the keyboard viewer, thankfully.  Any suggestions?

    Unable to type while Mouse Keys is enabled in OS X

  • Can we hide a Field in the IDOC

    Hi,
    I want to hide a Field in the Idoc's. Is this POssible ?
    If so how? Can any body tell me how to proceed ..
    With Regards
    Ranjith Singh

    Hi Eswar,
    Thanx for replying..
    But here the it says "Madatory Fields". As i am doing it for the first time i am not getting it..
    Can u please explain it in Detail.
    Thanx & Regards
    Ranjith Singh

  • How can I hide a subvi in the hierarchy window?

    I want to hide a subvi of my top level vi in the hierarchy window. I know by calling it dynamically that it won't be in the hierarchy window until it is called but I want to keep it in the hierarchy. I just don't want to display it in the hierarchy window when a user looks at it. Kinda like an easter egg or like the multitude of vi's that NI hides. Can anyone give me a solution?
    BJD1613
    Lead Test Tools Development Engineer
    Philips Respironics
    Certified LV Architect / Instructor

    This is from the 1/14/03 info-labview digest:
    Hi, Tim
    As you know, to distinguish between public and private methods, GOOP uses the LLB-top-level flag. Public methods are top-level and private method are non-top level.
    But GOOP does one more thing with private method VIs. They are checked as "System VI", a property which make them invisible in the VI hierarchy and in the "VIs in Memory" application property, unless their panels are open. You can upgrade to the new GOOP wizard, downloadable from http://www.endevo.com/default.asp?lang=eng. It doesn't check VIs as system VIs. It is compatible backwards, so perhaps you can "repair" your existing GOOP objects if you use the new wizard, but I'm not sure. S
    ince you can store objects in both directories and in LLBs with the new wizard, perhaps it helps to convert from LLB to directory and back to LLB again.
    If the above doesn't work, you can use these two VIs to uncheck the "System VI" property:
    1) C:\PROGRAM\National Instruments\LabVIEW 6\project\goopwiz.llb\Hide System VIs.vi
    2) C:\PROGRAM\National Instruments\LabVIEW 6\vi.lib\utility\libraryn.llb\Librarian List.vi
    Use (2) to create a list of VIs in your GOOP object LLB. Then loop through all the VIs and use (1) to uncheck the property.
    If you want to read more about this, you can search for the string "Invisible VI ?!?" in http://www.searchview.net/, during 2001, in the info-labview archives. Then read the postings with the subject "Invisible VI ?!?".
    Hope this was helpful!
    Andreas

  • Can I disable a key on the keyboard?

    I'm a touch typist, but learned back in the days when they really were typewriters. I love the Mac keyboard -- except for the placement of the Caps Lock key which I must inadvertantly brush half a dozen times a day. It's a pain to go back and re-type (which is faster than highlightingt, going to the menu bar and using the "Change Case" facility). Is there any way that I can "turn off" or disable the Caps Lock key (short of whacking it with a hammer?
    Thanks.

    Abject apologies for the delay in thanking you for your instructions. Absolutely brilliant. Piece of cake. Many thanks.

  • How can i hide( close or exit) the windows media player window from front panel after a video is played.

    I want a video to be played when i star executing a vi. After that i want to remove(hide or close) the media player window from my front panel.how can i do this?
    the vi is attached.
    Electronics and Instrumentation Engineer
    Freelance LabVIEW and Arduino programmer.
    For projects contact me ; [email protected]
    Solved!
    Go to Solution.
    Attachments:
    videovi.vi ‏9 KB

    Check out the attached code.
    If it solves your problem then dont forget to mark this as a solution. Also if you like the answer dont forget to give me kudos
    Tushar Jambhekar
    [email protected]
    Jambhekar Automation Solutions
    LabVIEW Consultancy, LabVIEW Training
    Rent a LabVIEW Developer, My Blog
    Attachments:
    Main.vi ‏14 KB
    MediaPopup.vi ‏21 KB

  • How can i hide a portion of the text inside a spry dataset "stackedcolumn"?

    Hi all
    I have a spry dataset set up reading a .xml file for the price/name/description/etc. I want to only show some of the text (a certain number of characters) at the start then give the visitor the option of clicking a toggle button to see more of the description and help with size of the pages.  How do i do that exactly?
    I know I have to probably implement jquery toggle but how does it work with a spry?
    here is the code as it stands.
       <div spry:region="catalog" class="SpotlightAndStacked">
          <div spry:repeat="catalog" class="SpotlightAndStackedRow">
            <div class="SpotlightContainer">
              <div class="SpotlightColumn"><a href="_images/catalog/Art/{Picture_File}" title="{Headline}"><img src="_images/catalog/thumbs/Art/{Picture_File}"></a></div>
            </div>
            <div class="StackedContainer">
              <div class="StackedColumn"> {Item_Last_Name}, {Item_First_Name}</div>
              <div class="StackedColumn"> {Item_Code_Number}</div>
              <div class="StackedColumn"> {Headline}</div>
              <div class="StackedColumn"> {Complete_Description}</div>
              <div class="StackedColumn"> {Item_Code_Number}</div>
              <div class="StackedColumn"> <strong>Retail price: {Retail_Price}</strong></div>
            </div>
            <br style="clear:both; line-height: 0px" />
          </div>
        </div>
    Thanks in Advance

    There are many options for editing objects/layers in the time line. You can split tracks, slip videp, trim, delete, cut, copy and paste etc. Without more specifics about what you want to do I would suggest you review the users guide. Select help to open the manual and then go to Timeline>Edit objects in the timeline. I am sure you will find the answer to your question.

  • How can I hide or arrange alphabetically the folders that show up in 'local photos'?

    I have roughly 4000 photos and images in 150+ folders on my android tablet. Most of it is necessary presentation material that will never be opened in photoshop touch. However, when I get to the point in a presentation that I need to design something quickly, I'm faced with all 150+ folders showing up in 'local photos' in no discernable order.  I  only need 4 folders and about 12 sub folders that I will return to 3-4 times while creating the design. It is really time consuming to find the correct folder as they seem to be listed randomly. How do I isolate only the folders I need to see? Failing that, is there a way to get the folder/sub folder hierarchy to work? Failing that, can they be arranged alphabetically? Failing that, how are the folders arranged?

    Do you know how the folders are listed? Perhaps I can just change the folder creation date to some time in the future to get them to populate to the top of the list. I've designed the content so that 130+ of our dealers with android tablets can use the program out in the field to quickly design signs with it  --if I can only get over this hurdle.

  • Can I "hide" form queries that the respondent did not answer?

    In the e-mail summary recap and the PDF report that is generated after each submission I get a print out/report listing all fields (70+) despite the fact that the user only has to answer/complete approximately 20 fields to complete the form. In other words, I only want to see what the user actually responded to/selected, not ALL of the possible selections. Please help - this problem is causing us to have to print out a 48 page report for every response (as opposed to the 2-3 page report that it should be).

      We currently do not support this. You can use the "Create an idea" action to submit a feature request that can be voted on by other FormsCentral users.

  • Can I hide certain folders from the 'tree view' under Site Manager - Pages?

    In the above image, is there a way to hide the circled folders from the listing?
    This will help in reducing confusion and possible breakages.

    Hi AirborneAgency,
    unfortunately there is not, educate the admins of this site not to touch these folders instead. That's what I do with my clients and it works just fine.
    Nicole - BCGurus.com   |  http://bcgurus.com/Business-Catalyst-Templates for only $7

  • How can i hide this window from the start bar at bottom of screen???

    Hi,
    I have created a program that will sit on my desktop all the time but i have a little problem with it.
    Well i want my application not show in the toolbar at the bottom where my START button is, like a dialog window. I am not sure if you can do this with a frame and didnt know what the toolbar at the bottom of my screen would be known as so i didnt know what to type in the search bar.:(:(.
    Well if you can help me i be most grateful.
    Thanks in advance

    o well, that dont work in my program. My programhas
    menu bars in it so JWindow dont work.I suppose a GUI trick you could do is to put put a
    JDesktopPane in the JWindow and then put a
    JInternalFrame inside that. Then have the internal
    frame maximized to fill the JWindow to look like a
    real frame.You should not be able to move the JWindow with the JInternalFrame.

Maybe you are looking for