Can't I use Field NE SPACE in READ statement ?

What is wrong with the below statments
READ TABLE t_zdadp_rpt WITH TABLE KEY t_zdadp_rpt-zdesc NE SPACE.
READ TABLE t_zdadp WITH TABLE KEY zdesc NE SPACE.
Could you pleae help

Hi,
In the first statement u have to specify only field name also in read statement no need for table key its just key..U cannot use NE symbol for read statement.
READ TABLE t_zdadp_rpt WITH TABLE KEY t_zdadp_rpt-zdesc NE SPACE.
READ TABLE t_zdadp WITH TABLE KEY zdesc NE SPACE.
plz correct the code like this
READ TABLE t_zdadp WITH KEY zdesc Eq SPACE.
if sy-subrc ne 0.
do what ever u want.
endif.
reward if helpful.
Regards,
nagaraj

Similar Messages

Why can't I use/build an SD card reader for iPhone?

I have searched and searched for an SD card reader for iPhone. Apple offers the camera connection kit for iPad but for some reason they have made it incompatible with iPhone. This doesn't make a whole lot of since to me unless they are trying to drive users to buy an iPad. So far I have only found one SD card reader that claims to work on iPhone: http://www.zoommediaplus.com/index.html . If they have actually made it work with iPhone and the app is in the App Store then Apple must allow apps to transffer data from SD cards. If so I can make one myself and build the hardware to go with it since the Apple SD card reader doesn't work on iPhone.
I guess my main questions are:
     Does Apple allow SD Card readers for iPhone?
     if not:
          Why don't they?
          Can anyone tell me where it is documented that you can not use SD Cart readers with iPhone?
          How does ZoomMediaPlus get their app in the App Store if it isn't allowed?
     if they do:
          Why aren't their more SD Card readers for iPhone?
          Why doesn't Apple's lightning SD Card read work with iPhone?

Of course they forbid it. You realize that an iPhone 6+ owner cannot use the Apple Lightning SD Card Reader, don't you? We know the support for their own SD Card Reader is built into iOS 8 because it works with iPads. Therefore, Apple intentionally turned the support OFF for iPhones.
and it appears no one else has bothered to attempt to produce one
No, Apple forbids any third parties from producing one. They produce them for iPads but they cannot work on iPhones, because Apple chooses not to permit such functionality (i.e., they forbid it). Third parties produce such adapters for Android, so obviously they would want to do the same for iOS so they could sell more.
You're recommendation for AirStash is uninformed. I've tried it and found it to be a clunky time-consuming workaround if all you want to do is import some photos from an SD card. Using Photos in iOS to import photos is a far more elegant solution - an Apple solution that just works (if you purchased an iPad).
If it bothers you that iPhones do not work with Apple's own Lightning SD Card Reader, then I suggest you leave feedback instead of attacking those who point it out:
http://www.apple.com/feedback/

Using Field Exit for a field in table KNA1

Hi everyone,
I am working on a ticket, the problem is we have a field called STRAS in table KNA1 which holds the address of the customer but now we want to increase the length of this field from 35 charachters to 55 due to some business requirement. SO my question is if this can be done using Field Exit and if yes.. can you please tell me how as I have never used Field exits.
Thanks,
Rajeev

Hi,
Using field exit, you can only validate the data entry for the field (either globally or on a particular screen field)
This is usually done by implementing the field exit for the data element corresponding to the field(in your case STRAS_GP)
Hence you cannot increase the length of the field using the concept of the field exits...
Please note that after SAP R/3 4.6c, SAP has stopped the creation of field exits and there will be no support for any new ones created.
Regards
Shiva

Can we use more than one or in read statement

READ TABLE itab_return INTO wa_return
WITH KEY type = 'E' or
= 'i'.

hi.
No u cannot use 'and' or 'or' in read statement.
you can do as
FOR AND condition
read table itab into wa with key type = 'I'.
if sy-subrc = 0.
read table itab into wa with key type = 'E'.
endif.
FOR OR condition
read table itab into wa with key type = 'I'.
read table itab into wa with key type = 'E'.
if sy-subrc = 0.
<code>
endif.
regards
prasanth

HT204053 How do you change apple id for icloud if phone is already set up. Need to give each phone in my account their own apple id for icloud so that we dont receive each others messages but can still all use same id for purchases.

How do you change apple id for icloud if phone is already set up. Need to give each phone in my account their own apple id for icloud so that we dont receive each others messages but can still all use same id for purchases.

Settings-icloud-scroll to the bottom, select delete, if you want to keep the content select keep, otherwise it'll remove it. Then once it is done add the account information for the account you want on that phone. Your apple ID in settings-store will remain the same and each device can still purchase/use content from that account.

HT204053 hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

Both accounts are completely independent from each other. In order to use the space that you have purchased for your secondary account, you must change it to become your primary account. Yes, as you said, services like photo stream only work with the primary account. Unfortunately, there is no comfortable way to just transfer data from one account to another one, but you can do it via a third party application e.g. via Dropbox: e.g. for photos: photos stored with your current primary account > manual transfer to dropbox > after you made your secondary account to the primary account, transfer the photos back to your new primary account etc.

I am out of space on my Macbook Air and have a Time Machine Backup. I want to complete reset my mac, but wonder if I can pick and choose what I restore to my computer? Can I also use my time machine backup and external storage as well?

I am out of space on my Macbook Air and have a Time Machine Backup. I want to complete reset my mac, but wonder if I can pick and choose what I restore to my computer? Can I also use my time machine backup as external storage as well for the files I don't need everyday?

If you are using "Restore from Time Machine Backup" option from OS X Recovery, you can only choose from the broad categories presented.
... Can I also use my time machine backup as external storage as well for the files I don't need everyday?
To be clear, if you are asking if you can use the volume containing your Time Machine backup to store additional, non-Time Machine files, the short answer is yes.
It's not a good idea though, since the Time Machine backup will eventually fill all available space, after which it begins to remove old, "expired" backups to make room for newer ones. The presence of additional files doesn't change that fact, and Time Machine will not erase them, but you will encounter a dilemma should you want to store additional files on that volume when there is no remaining space. You will have to make room for them on your own, by deleting existing files. Furthermore, since Time Machine cannot back up its own volume, those additional files will not be backed up by Time Machine.
The easy solution for what you describe is to purchase additional external storage. External USB hard disk drives have become very inexpensive; about $55 will buy a perfectly suitable 1 TB drive.
You can also choose to replace your MacBook Air's internal storage with a larger capacity one. Look for a suitable replacement from OWC / MacSales:
http://eshop.macsales.com/shop/SSD/OWC/Air-Retina
That gets a little more expensive but it is the optimum solution.

Reg. can we display alv grid using field groups (extracts)

Hi,
can we display alv grid using field groups (extracts). is this possible. i have to develop a blocked alv.
tnks
Yerukala Setty

No, you will need the data in an internal table to use ALV.
Cheers
Allan

Can I verify a field-symbol using its component name?

Hello experts,
I am looping at my field-symbol and I need to know what are its component name.
I need to create an IF or CASE statement checking whether the field-symbol's
component name is equal to that of the value that I declared. I want to do
something like this:
LOOP AT <fs_dyntable> ASSIGNING <wa_dyntable>.
ASSIGN COMPONENT sy-index OF STRUCTURE <wa_dyntable>
        TO <component>.
        IF sy-subrc <> 0.
          EXIT.
        ENDIF.
if component name = '2000'.
    condition...
elseif component name = '1999'.
    condition...
elseif component name = '1998'.
    condition...
endif.
endloop.
Again, thank you guys and take care!

Hi,
I am not clear on your doubt , but you can use field-symbol fields like below:
* if <component>-fld1 = '2000'.
condition...
elseif <component>-fld1 = '1999'.
condition...
elseif <component>-fld1 = '1998'.
condition...
endif.
endloop.
LOOP AT x_table ASSIGNING <wa_table>.
IF <wa_table>-fld1 EQ 100.
-----your code
ENDIF.
ENDLOOP.
Regards
Appana

Hi I am wondering if anyone can help me. I have two albums in my photos app other than the camera roll that i cant seem to get rid of. They contain duplicates of the photos i already have in my camera roll and its using alot of space.how do i delete them?

Hi I am wondering if anyone can help me. I have two albums in my photos app other than the camera roll that i cant seem to get rid of. They contain duplicates of the photos i already have in my camera roll. One is called Photo Library, and the other is called iphone. It's using alot of space and I don't know how to delete them. Please HELP!!

those are photos that have been synced to your phone from your computer. plug in your phone to your computer, open itunes, select 'photos' tab from the top, and uncheck 'sync photos'
this will erase the photos from your phone that are not in the camera roll

I can't scroll by hitting the space bar, or clicking on the scroll bar itself, or even use the scroll arrows- how do I make them work again?

I wake up, unhibernate my laptop and suddenly I can't scroll by hitting the space bar, or clicking on the scroll bar itself, or even use the scroll arrows. In other programs it works fine. What happened and how do I fix this?

You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing].<br />
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
You can press Ctrl + L to go to the location bar.

How can I limit the amount of space on a Time Capsule used by Time Machine?

I know that you cannot partition a Time Capsule drive. However, I was wondering about other options for limiting the amount of space used by Time Machine so that I can use the rest of the space for other purposes.
I heard something about creating a disk image on the Time Capsule to limit the amount of space used by Time Machine. If I create a disk image, would TM just use all the space that's not part of the disk image? How do I access the disk image part? Can I manually drag and drop files to it from my Mac like any other external drive? Could I set up the disk image part to work with a Windows computer?
I've also heard things about modifying sparsebundles which I don't know anything about. How does this work? What happens to the space that is not part of the TM sparsebundle? How do I access it? Can I manually drag and drop files to it from my Mac like any other external drive? Could I set up the extra space to work with a Windows computer?

Some other things to make note of:
Some disk image formats have a maximum size and only use that size after they have had to expand to actually hold that much data. Make sure you are not using this type of image so you can guarantee the space is reserved. Sparse bundles are like this. I haven't read up on the sparse bundle trick, but I assume it's something to do with setting a maximum size for it.
When you open up the Time Capsule disk, you will first be looking at the normal storage space. When you create an image, there will be a file you click on that mounts another drive that uses space on the Time Capsule. This shows up as just one file unless you open it to see it's contents.

IOS Cangjie input method can not be used. Original with Space Bar word selection function is invalid, as soon as possible to solve, it will affect the most users in Taiwan and Hong Kong.

iOS Cangjie input method can not be used. Original with Space Bar word selection function is invalid, as soon as possible to solve, it will affect the most users in Taiwan and Hong Kong.

No PR1.2 Firmware update, No update for Nokia Messaging, No updates for Ovi Maps .... Why is the N900 the forgotten stepchild ?
"PR1.2 is still being tested - http://twitter.com/luovanto/statuses/13087245356"
Hong Kong Launch http://www.youtube.com/watch?v=pY8zCBzvQLo

Can new cutsom currency fields on User Records be used for SOD Analytics?

We will have new cutsom currency fields on User Records. Can we utilise these new custom fields for dashboard reporting using SOD Analytics?

Hi
Yuo can try to use FOR ALL ENTRIES option.
IF you have:
WERKS BTRTL
Z002 Z001
Z002 Z002
Z003 Z001
Z003 Z002
You should do something like that:
DATA: BEGIN OF <TAB_SEL> OCCURS 1,
       WERKS TYPE WERKS,
       BTRTL TYPE BTRTL,
      END   OF <TAB_SEL>.
WERKS BTRTL
<TAB_SEL>-WERKS = 'Z002'. <TAB_SEL>-BTRTL = 'Z001'.
APPEND <TAB_SEL>.
<TAB_SEL>-WERKS = 'Z002'. <TAB_SEL>-BTRTL = 'Z002'.
APPEND <TAB_SEL>.
<TAB_SEL>-WERKS = 'Z003'. <TAB_SEL>-BTRTL = 'Z001'.
APPEND <TAB_SEL>.
<TAB_SEL>-WERKS = 'Z003'. <TAB_SEL>-BTRTL = 'Z002'.
APPEND <TAB_SEL>.
SELECT * FROM <TABLE> INTO TABLE ITAB
   FOR ALL ENTRIES IN <TAB_SEL>
                   WHERE WERKS = <TAB_SEL>-WERKS
                      AND BTRTL = <TAB_SEL>-BTRTL.
In this case you need to fill correctly the internal table <TAB_SEL> with the all combinations.
Max

Can't I use Field NE SPACE in READ statement ?

Similar Messages

Maybe you are looking for