Visual Studio 2010 Upgrade - Unable to view some reports

I converted an application that had been developed in VS2005 so that it would run in VS2010. The application contains several Crystal Reports. Now when I debug the application I can only view some of the reports. With the others I get an exception with the message "Unable to find the report in the manifest resources. Please build the project and try again."
The ones that work and the ones that don't all have the Build Action set to Embedded Resource. I have tried removing a report from the project and then adding it back, but that made no difference. A new report displayed fine.
Does anyone have any ideas about what could cause some of the reports to throw this exception?

OK, here is the link to the thread I am replying to Visual Studio 2010 Upgrade - Unable to view some reports
And here is what I posted to start the thread that I am replying to:
I converted an application that had been developed in VS2005 so that it would run in VS2010. The application contains several Crystal Reports. Now when I debug the application I can only view some of the reports. With the others I get an exception with the message "Unable to find the report in the manifest resources. Please build the project and try again."
The ones that work and the ones that don't all have the Build Action set to Embedded Resource. I have tried removing a report from the project and then adding it back, but that made no difference. A new report displayed fine.
Does anyone have any ideas about what could cause some of the reports to throw this exception?
As you can see, I have described the exception that occurs when I try to view some, but not all, or the reports while debugging. I have also tried deleting a report and adding it back in but it made no difference.
Is this enough information?

Similar Messages

CRVS2010 Beta - How do you hide the Group Tree for Visual Studio 2010

Would anyone know how to hide the group tree in the Crystal Reports viewer for Visual Studio 2010. I have tried
DisplayGroupTree="False" and found the property doesn't exist in the new version for VS 2010. I have search in the designer options and found nothing. Note this report is for ASP.net.
Thanks
Dave.
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Sep 15, 2010 8:55 AM

A simple search using the search box in the top right corner of this web page would have come up with the following KBase as one of the 1st - if not the 1st hit (for once, we beat Google ).
[1183704 - How to display or hide the Group Tree in CrystalReportViewer control through code in Crystal Reports 2008|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133383333333733303334%7D.do]
- Ludek

How do I resolve error 1310 while installing crystal report version for visual studio 2010.

How do I resolve error 1310. I try to install crystal version for visual studio 2010, but I got this error message. Error 1310. Error writing to file. mcf80.dll.verify that you have access to that directory. My pc is window 7 (32 bit). Please I need help
urgently to work with this program in my system successfully. Please help.

Hello Dorohidea,
Do you mean that when you install crystal report in virtual studio 2010, you receive the error message about error 1310?
Please take a look at the following KB.
Support for Crystal Reports for Visual Studio
https://support.microsoft.com/kb/317789/en-us
In Visual Studio 2010, to create a Crystal Reports project or Web site or to import existing projects or Web sites that were created by using older versions of Visual Studio or Crystal Reports, you must first install a version of Crystal Reports that is
compatible with Visual Studio 2010.
For more information about how to use Crystal Reports in Visual Studio 2010, visit the following SAP Crystal Reports website:
http://www.sap.com/crystalreports/vs2010
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Group Tree issue when refreshing- Crystal for Visual Studio 2010 WPF Viewer

Hello,
We've run into an issue when refreshing reports with the WPF viewer for Visual Studio 2010. After the report is refreshed, the Group Tree is blank and it should have values. For example, you run a report and see values in the Group Tree. If you refresh the report with the same parameter values the Group Tree is blank.
Has anyone run into this yet?
Thanks,
Tyler

That is correct.
I just did a quick test and was not able to reproduce the issue.
Details of test:
1) Create a new app;
File | New | Project
Visual Basic | reporting -> Crystal Reports WPF Application
2) Add the "Open File" button to the viewer (ShowOpenFileButton off of the WPF viewer properties)
3) Run app
4) Browse to a report that has a number of groups >250
5) Refresh report using the Refresh button on the viewer
I'll work on this a bit later today, see if I can repro it another way. Meanwhile, can you provide mode details (code) on how you repro the issue?
- Ludek

Error in upgrade Crystal Reports for Visual Studio 2010 to SP1

During the installation of SP1 of Crystal Reports for Visual Studio 2010 (RTM was already installed) I got an error message saying:
Error 2753. The file "agent.exe.6ED28686_7B19_420C_B255_5B6C1BD2C705" is not marked for installation.
After a rerun of the setup program (choosing reinstall) the message did not re-appear.
It happens on Windows 7 x64 with Visual Studio 2010 SP1
Is this a bug in the installation or an "undocumented feature"?
Regards,
Adri

Hi Adri,
I had that error once and one other poster also had it. Like you I just re-installed and no error on the second round.
I believe it was some Windows Process had the file locked for some reason. It's not a bug or "undocumented feature" it's a Windows OS thingy....
Before uninstalling anything it may be a recommendation to reboot first and not load anything that may be locking dependencies.
How many times have you seen this?
Thank you
Don

Crystal Report in Visual Studio 2010

Hello,
Our company is using Crystal Report XIR2. We are going to migrate our applications using Crystal Report to Windows Server 2008 (64-bit), we have to upgrade the Crystal Report too as current version does not support 64-bit version. Which version of Crystal Report will be bundled in Visual Studio 2010? CR 2008 or a newer version?
Many thanks,
Peter

"Unknown". Certainly, at this time the info is not available publicly. It may even be the CR is not part of future builds of .NET (?). On the other hand, going by how these bundles have gone in the past, I'd suspect if there is a CR bundle or an add on of some sort, it will be what ever will be the current version minus 1. Will it be as fully featured as the currently shipping CR 2008? Again, go by past bundles. (E.g.; if there is something like CR 2010 out there, the bundle would probably be some variation of CR 2008). Will it be 64 bit? Again, consider the history; bundles that come with .NET 2005 and .NET 2008.
Disclaimer:
These are my personal speculations and conclusions and are not meant to be interpreted as the "official" word from SAP.
Ludek

How to Install Visual Studio 2010 on a PC with Microsoft Office 2013 with 64 bits

I am with problems to have acess to the link: http://www.microsoft.com/en-us/download/details.aspx?id=12187
Why?
I want do install Visual Studio 2010 on a PC with Microsoft Office 2013 with 64 bits. How can I do it?
Thanks.

Hello Carla Sofia,
Visual Studio installation do not depends on Microsoft Office 2013. They do not have relationship here. I think your problem is that you cannot find the link to install Visual Studio 2010.
In order to know why, please see here:
https://support.microsoft.com/en-us/lifecycle/search/default.aspx?sort=PN&alpha=Visual%20Studio%202010&Filter=FilterNO
The mainstream support for Visual Studio 2010 is already expired and that is why you cannot open any link about Visual Studio 2010 Setup.(I cannot verify whether that link is about VS2010 Setup.)
I think you need to think about the following:
1. If you need Visual Studio 2010, you may have to consider some other channels. For example, official site you can try use MSDN Subscription. For non-official site. Sorry I cannot provide any place for you
2. You can use other latest version of Visual Studio, for example, we have Visual Studio 2012, 2013, 2015 for you to use. You can also use Visual Studio Express 2010 version. It is still available for download.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Microsoft Visual Studio 2010 Tools for Office Runtime installation Error

Hi Team,
Am facing error while installing Microsoft Visual Studio 2010 Tools for Office Runtime installation. Request you to please check and let me know.
Component Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64) has failed to install with the following error message:
"User cancelled installation. "
The following components failed to install:
- Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)
See the setup log file located at 'C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\install.log' for more information.
The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [InstallMode] = HomeSite {string}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 6.1.1 {version}
Running checks for package 'Windows Installer 3.1', phase BuildList
The following properties have been set for package 'Windows Installer 3.1':
Running checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1': true
Result of checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is 'Bypass'
'Windows Installer 3.1' RunCheck result: No Install Needed
Running checks for package 'Microsoft .NET Framework 4 (x86 and x64)', phase BuildList
Reading value 'Version' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Full'
Read string value '4.0.30319'
Setting value '4.0.30319 {string}' for property 'DotNet40Full_TargetVersion'
The following properties have been set for package 'Microsoft .NET Framework 4 (x86 and x64)':
Property: [DotNet40Full_TargetVersion] = 4.0.30319 {string}
Running checks for command 'DotNetFX40\dotNetFx40_Full_x86_x64.exe'
Result of running operator 'ValueEqualTo' on property 'InstallMode' and value 'HomeSite': true
Result of checks for command 'DotNetFX40\dotNetFx40_Full_x86_x64.exe' is 'Bypass'
Running checks for command 'DotNetFX40\dotNetFx40_Full_setup.exe'
Result of running operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite': false
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'DotNet40Full_TargetVersion' and value '4.0.30129': true
Result of checks for command 'DotNetFX40\dotNetFx40_Full_setup.exe' is 'Bypass'
'Microsoft .NET Framework 4 (x86 and x64)' RunCheck result: No Install Needed
Running checks for package 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)', phase BuildList
Reading value 'Version' of registry key 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4R'
Unable to read registry value
Not setting value for property 'VSTORuntimeVersionInstalled'
The following properties have been set for package 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)':
Running checks for command 'VSTOR40\vstor40_x86.exe'
Skipping ByPassIf because Property 'VSTORuntimeVersionInstalled' was not defined
Result of running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel': true
Result of checks for command 'VSTOR40\vstor40_x86.exe' is 'Bypass'
Running checks for command 'VSTOR40\vstor40_x64.exe'
Skipping ByPassIf because Property 'VSTORuntimeVersionInstalled' was not defined
Result of running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'AMD64': false
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of checks for command 'VSTOR40\vstor40_x64.exe' is 'Install'
'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)' RunCheck result: Install Needed
EULA for components 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)' was accepted.
Copying files to temporary directory "C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\"
Downloading files to "C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\"
(1/7/2015 12:47:44 PM) Downloading 'VSTOR40\vstor40_x64.exe' from 'http://go.microsoft.com/fwlink/?LinkId=158918' to 'C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\'
Download completed at 1/7/2015 12:48:26 PM
Verifying file integrity of C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\VSTOR40\vstor40_x64.exe
WinVerifyTrust returned 0
File trusted
Running checks for package 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)', phase BeforePackage
Reading value 'Version' of registry key 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4R'
Unable to read registry value
Not setting value for property 'VSTORuntimeVersionInstalled'
The following properties have been set for package 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)':
Running checks for command 'VSTOR40\vstor40_x64.exe'
Skipping ByPassIf because Property 'VSTORuntimeVersionInstalled' was not defined
Result of running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'AMD64': false
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of checks for command 'VSTOR40\vstor40_x64.exe' is 'Install'
'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)' RunCheck result: Install Needed
Verifying file integrity of C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\VSTOR40\vstor40_x64.exe
WinVerifyTrust returned 0
File trusted
Installing using command 'C:\Users\ALAKKOJU\AppData\Local\Temp\VSDF353.tmp\VSTOR40\vstor40_x64.exe' and parameters ' /q:a /c:"install /q /l"'
Process exited with code 1602
Status of package 'Microsoft Visual Studio 2010 Tools for Office Runtime (x86 and x64)' after install is 'InstallFailed'
Thanks,
Anil

Hi Anil,
According to the error message "User cancelled installation" and the log "Process exited with code 1602", it seems that it is you cancelled the installation that cause the install fail. Is that true? If yes, please reinstall
it without cancelling it. You can take the following steps:
Download "Visual Studio 2010 Tools for Office Runtime" from
http://www.microsoft.com/en-us/download/details.aspx?id=42513 .
Run the downloaded vstor_redist.exe with admin.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

RoboHelp 10 and Visual Studio 2010

The company I work for is thinking about buying RoboHelp 10 to create an offline user help system for a WPF Ribbon Application being developed in Visual Studio 2010. I have been tasked with finding the recommended output format from RoboHelp 10 AND the best viewer for Visual Studio 2010. CHM output format is not an option. I have searched the web and found nothing that addresses both products. Does anyone know the best output format to use AND/OR what is the best viewer? Any / all suggestions will be greatly appreciated.

Visual Studio does have its own ability to create a help file. Here's the home page of Paul O'Rear's blog. http://blogs.msdn.com/b/thehelpguy/ You will also find information at http://www.helpware.net. You need to research that to find out if that would suit. This is not the forum for that topic.
Aside from that, the first issue is where is the help going to reside? If it is on a web server, then WebHelp would be an option. That can also be run locally but you may encounter some issues if you need links to PDF files. If the help is going to be installed locally, what's the objection to CHMs? In RoboHelp 10 they can be skinned to look like WebHelp.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Error LNK1123 on Windows 7 Visual Studio 2010

I tried to build the Windows verison of PuTTY on my Windows 7 workstation using VS 2010. The code compiled with some warnings about deprecated functions but it produces an error 'LNK1123: failure during conversion to COFF: file invalid
or corrupt'.
I went to the Property Pages->Linker->General and set incremental linking to 'No'. I also entered the folder path where the file 'cvtres.exe' is located. I also installed Visual Studio 2010 SP1. I also set 'Embed Manifest' to 'No'. Nothing
seems to work.
I have rebooted and rebuilt the entire project at least ten times with the changes mentioned above implemented. There is something else I probably missed however, I do not see it in the threads on the various blogs and forums.
Taurus64

Hi Taurus64,
>>I tried to build the Windows verison of PuTTY on my Windows 7 workstation using VS 2010.
If it generated the error when you build your project, I doubt that this forum is not the correct forum for this issue since this forum is to discuss the VS IDE.
But one important issue is that whether it is related to third party product. Would you mind letting us know more information about the "PuTTY "?
Maybe you could get better support here:
http://www.chiark.greenend.org.uk/~sgtatham/putty/
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I can't install MS Visual Studio 2010 ultimate

Hi everyone
I'm trying to install MS Visual Studio 2010 in my laptop, but it get stuck on this point shown in snap shot. I've installed this several times before but now i can't, even I installed my windows again but the problem is same. I'm using windows 7 ultimate.
Please help me if someone knows about it.

Hi,
Could you please clarify some information like from where you are installing the Visual Studio 2010 ultimate. Are you trying to use web installer or you downloaded the ISO from Microsoft web site.
If it web installer, It may cause by connection issue during the installation. Please try download the content online or copy the content from your DVD to some folders from your disk, then try the installation again. And try to use the tool in below link
to check your ISO checksum.
http://support.microsoft.com/kb/841290
Then you can follow up the steps in the link to install your VS:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/60f71a54-506e-4c70-be98-e993ce6d1ddf/visual-studio-installation-tips?forum=vssetup
If the error also occurs, please use http://aka.ms/vscollect to gather the installation logs. You will find vslogs.cab from %temp% folder. Please upload the file to
https://onedrive.live.com/ and share the link here.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Facing bug Issue with Visual Studio 2010 SP1 software. need a Hotfix Patch KB2561001

Hi Team,
i have installed Visual Studio 2010 SP1 software in my system. but i am facing some issue with a bug. This bug needs a Specific Hotfix Patch ( KB2561001).
But when i am clicked on above link, not able to find this patch.
Kindly request you to provide this Requested patch as project has been stuck without this.
please look into this issue on priority. Eager to listen from your side.

Hi mihir ray,
Like this report:
https://connect.microsoft.com/VisualStudio/feedback/details/611665/storegeneratedpattern-does-not-saved-properly-into-edmx-entity-framework-4-0
It seems that the link for this kb is not available. So the real issue is that which kind of issue you get, and then check whether this issue has been resolved by the latest VS version. Like the above report, maybe the new VS version would be better for
certain limitations for old versions.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Beginning SharePoint 2010 Development with Visual Studio 2010

I am a beginner with SharePoint 2010 development with Visual studio 2010. Please guide me for some good, practical videos tutorials and books which would help me get started with programming. I need to build some workflow in VS2010 in C#. Please help!

Hi PinkRuby,
There are some good videos on the MSDN site that give a general overview of developing on the SharePoint platform.
http://msdn.microsoft.com/en-au/office/dn448488
Another good resource is PluralSight. You need a paid subscription (though it's not much), but it has lot's of great video content for learning.
http://pluralsight.com/training/Courses#sharepoint
Regards, Matthew
MCPD | MCITP
My Blog
View
Matthew Yarlett's profile
See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos

Crystal Report 13 Visual Studio 2010 SQL Server 2008 R2 ODBC Problem

Hi Everybody,
I am new in Crystal Report.
I developed a web application in Visual Studio 2010, and my Database is SQL Server 2008 R2.
I created reports using Crystal Report 13 in Visual Studio and my Operating System is Windows 7 32-Bit.
I used ODBC Connection System DNS for my application.
It is running fine even after Hosting on my local PC.
But it creates problem when hosted on my Team Leader PC and Test Server.
Their Configurations are same but only difference is "SQL Server 2008" Not R2
The Error I am getting is "Failed to open the connection".
When I Host the same on my another team member PC, I am getting the error like
"Failed to open the connection. Details: [Database Vendor Code: 4060 ] Database Connector Error: ' [Database Vendor Code: 4060 ]' Failed to open the connection. Failed to open the connection. TestVr {CE268132-D2BD-43EC-BE45-0BCD847FBCDA}.rpt Details: [Database Vendor Code: 4060 ]"
I tried various solution to fix this bug.
But i am unable to do this and not getting any idea to fix this issue.
If anyone can guide I will be thankful to him.
All suggestions are appreciable.
Thank you

Hi,
Please use the top right search box. for ex below search which will return many useful kb's, articlea and forum threads where simillar issues are discussed.
[http://www.sdn.sap.com/irj/scn/advancedsearch?query=failedtoopentheconnection|http://www.sdn.sap.com/irj/scn/advancedsearch?query=failedtoopentheconnection]
Most probably the issue is missing database client driver / provider.
Install the driver used to connect the rpt to the db on the server and then create a 32 bit DSN with the same name as the dev machine..
Hope this helps,
Bhushan.

Crystal Reports Visual Studio 2010 SP2 Fixed issues

Hi All,
Here is the list with fixed issues in Crystal Reports Visual Studio 2010 SP2
http://www.crystaladvice.com/crystalreports/crystal-reports-2010-sp2
The following list with issues is fixed:
1566763 - CRVS2010 WPF Viewer error; "System.NullReferenceException was unhandled" PageControl.OnMouseMove
1540637 - Error: External component has thrown an exception. Launching the Database Expert in the embedded Crystal Reports designer in Visual Studio
1544675 - Error; 'Object reference not set to an instance of an object' when using the CR WPF viewer in VS2010
1578823 - CRVS2010; "Load Report Failed" error when Report is open in any full version of the CR Designer
1638191 - Using RTL language (Arabic) the CR viewer Group Tree Panel does not display RTL
1631283 - Error; 'Failed to load database information' when reporting off of file system data
1553469 - How to enable Database logging in Crystal Reports for Visual Studio 2010
1299185 - Error: Operation not yet implemented or Failed to Export, when exporting a Crystal Reports to Text format
1451960 - Null or empty values are not surrounded with delimiter when exported to CSV format
1659185 - The special Crystal Reports field, 'File Name and Path' shows temp path and temp name when viewing a report
1452648 - Dynamic Cascading Parameter prompts two times when using the Crystal Reports in VS .NET
1580338 - When refreshing a report that contains a linked subreport report takes long time to execute
1659111 - GCHandle left in memory for each open and close of a Crystal Report in VS2010 application
1356672 - Crystal Reports special field "File Path and Name" displays incorrect information in a Visual Studio .NET application
1593658 - Impersonation of database Log On credentials failure in report generation when set at runtime in a .NET application
1661239 - Summary fields are converted to String fields
1661276 - Using the Crystal Reports SetTableLocation method in VS .NET causes long report processing delays
1661200 - Not able to copy text from report objects using the Crystal Reports WinForm viewer for VS .NET
1631722 - Date function in a Selection Formula is removed when running a report in a VS .NET application
1525822 - Exception "Object reference not set to an instance of an object." thrown when clicking on Parameter Panel button in Crystal Report .NET Windows Form Viewer
1603082 - Cross-tab background colors not retained when exporting a report to PDF format
1603154 - Shared variable display the incorrect value in Crystal Reports
1427747 - Why does a CR .NET SDK web app have problems running on IIS 7 in integrated pipeline mode?
1545536 - Alignment set to Justify causes broken underline
Source: Resolved Issues in Service Pack 2 for Crystal Reports for Visual Studio 2010
With kind regards,
Pieter Jong
Crystal Advice
http://www.crystaladvice.com

Many thanks for the link Pieter.
I recently created a wiki that lists all of the fixes, their tracking numbers, associated Kbase numbers, Kbase titles and links to the kbases:
http://wiki.sdn.sap.com/wiki/x/tgK3Dw
It's 90% complete. I think I have a few Kbases to do to complete it.
Now that I think about it, I'll also add the link to the [sticky thread|SP 2 for Crystal Reports for Visual Studio 2010 released!; re. SP2 release.
- Ludek

Visual Studio 2010 Upgrade - Unable to view some reports

Similar Messages

Maybe you are looking for