Can't join AP with WiSM controller

We have a (brand new) WiSM blade installed in a 6509. The configuration looks ok, but when we try to register (join?) an AP with the controler the process fails. The controler shows the AP in the status display but the AP reboots, claiming that no join-response was received.
The controler claims that it sent the join-response, however imediatly after that it generates the error "Slot ID 0 is not valid for AP".
Here is a more complete log:
Tue Aug 22 16:08:47 2006: sshpmGetOpensslPrivateKeyFromCID: match in row 2
Tue Aug 22 16:08:47 2006: sshpmPrivateKeyEncrypt: calling RSA_private_encrypt with 236 bytes
Tue Aug 22 16:08:47 2006: sshpmPrivateKeyEncrypt: RSA_private_encrypt returned 256
Tue Aug 22 16:08:47 2006: sshpmPrivateKeyEncrypt: calling RSA_private_encrypt with 24 bytes
Tue Aug 22 16:08:47 2006: sshpmPrivateKeyEncrypt: RSA_private_encrypt returned 256
Tue Aug 22 16:08:47 2006: sshpmPrivateKeyEncrypt: encrypted bytes: 512
Tue Aug 22 16:08:47 2006: 00:18:b9:xx:xx:xx Successfully transmission of LWAPP Join-Reply to AP 00:18:b9:xx:xx:xx
Tue Aug 22 16:08:48 2006: 00:18:b9:xx:xx:xx Slot ID 0 is not valid for AP 00:18:B9:xx:xx:xx
Tue Aug 22 16:08:48 2006: 00:18:b9:82:29:2a Slot ID 0 is not valid for AP 00:18:B9:xx:xx:xx
Any thoughts, hints etc. We do have another controler that is working.
thanks
Phil

Turns out the SlotID 0 issue was a red herring. There was a bug in the network topology that prevented the join-reply from reaching the AP.

Similar Messages

Can I join Structure with Z table ?

Can I join Structure with Z table?
If yes...plz explain me with an example.
PLease provide me with an example to join a structure with a Ztable...
Any help would be appreciated...
Regards,
Krishna Chaitanya

Hi Chitanya,
It is possible to add fields in the form of structure to a Z table.it can be done in the form of Include or Append structure.There are no other ways to join structure to the table upto my knowledge.
if it useful, reward points.
Thank u,
Prasad G.V.K

Can we join Ztables with SAP std. tables in SQVI ?

Dear All,
Can we join Ztables with SAP std. tables in SQVI ?
How to use "left outer join" in SQVI ?
What r the rules/steps to be followed for creating right SQVI/query ?
Sometimes it gives error / we do not get any output ....
Pl' give examples.

hi
good
1- Yes
3-Check this example for SQVI Query.
It is possible to generate a complete list of purchase document releases with the purchase document number (requisitions and orders), releaser, release date and release time.
First, create an Infoset using transaction SQ02 directly reading from table CDPOS and create an additional table: CDHDR. If you are releasing purchase requsitions at the item level, it is convenient to create an additional field (PURPS LIKE EBAN-BNFPO) to capture the item number. Once the field is defined add the following code to it:
PURPS = CDPOS-TABKEY+14(5).
Once created, make sure to assign your Infoset to the user groups.
Second, create an SAP Query (SQ00) or QuickViewer (SQVI) based on the Infoset you created previously. Set CDPOS-OBJECTID, PURPS (additional field), CDHDR-USERNAME, CDHDR-UDATE & CDHDR-UTIME, CDPOS-TCODE, CDPOS-VALUE_NEW, and CDPOS-VALUE_OLD as list fields (display screen).
Set CDPOS-OBJECTCLAS, CDPOS-OBJECTID, CDPOS-TABNAME, CDPOS-FNAME, CDPOS-CHANGIND, CDHDR-USERNAME, CDHDR-UDATE & CDHDR-UTIME as the selection fields (selection screen).
Finally, execute your query. For filtering purchase requisition releases set:
Object class='BANF'
Table Name='EBAN'
Field Name='FRGKZ'
Change type='U'
For filtering purchase order releases set:
Object class='EINKBELEG'
Table Name='EKKO'
Field Name='FRGKE'
Change type='U'
Make sure to specify username, dates or purchase document number (object value) in order to reduce run times.
thanks
mrutyun^

How can i join PO with GRPO

Hi,
I make query as belown to join PO with GRPO.I wnat to calculate Quantity from PO to GRPO but in my query it show duplicate record i also use distinct but useless.My query as below.
SELECT T1.DocNum [PO No], T1.DocDate [PO Date], T3.ItemCode, T3.Dscription, T3.U_CostCentre, T3.DocEntry [GRN No], T0.DocDate [GRN Date],T3.Quantity'GRIR Quantity',T2.Quantity 'PO Quantity',
T3.Quantity-T2.Quantity 'Balance Quantity'
FROM OPDN T0 , OPOR T1, POR1 T2, PDN1 T3
WHERE T1.DocEntry = T2.DocEntry
and T0.Docnum = T3.Docentry
and T3.BaseRef = T1.DocNum
and T2.ItemCode = T3.ItemCode
and T3.DocDate between [%0] and [%1]
Can any body help in this regards.
Sohail Anwar Ali

Hi Sohail,
As i understand, you want to know till now how much of quantity stills needs to be delivered, in that case instead of trying joining two tables i would suggest to try this query which gives you
Purchase Order Document No,
Purchase Order Date,
Vendor Name,
Item Code,
Item Description,
Ordered Quantity,
Received Quantity,
Open Quantity.
as the filed OpenQty stores the Quantity yet to receive for that particular Purchase Order. As this approach is much more flexible
Query
SELECT T0.DocNum, T0.DocDate, T0.CardName, T1.ItemCode, T1.Dscription, T1.Quantity,
(T1.Quantity-T1.OpenQty) as "Recevied Quantity",
T1.OpenQty FROM OPOR T0 INNER JOIN POR1 T1 ON T0.DocEntry = T1.DocEntry WHERE T0.DocDate >=[%0] and
T0.DocDate <=[%1]
I hope this helps out your issue
regards,
Shreyas

How can I join PRPS with DRAD?

Hi,
I would like to join the table PRPS and DRAD in order to see all documents linked to a certain PSP. I tried to join DRADOBJKY with PRPSPSPNR but it doesn't work since the OBJKY is different from the psp-number. If I'm doing this with MARA~MATNR it works. Strange. can someboy help me?
Thanks

Hello,
Can you check if PRPS-OBJNR = DRAD-OBJKY ?
If this is not successful, then use the conv. exit CONVERSION_EXIT_ABPSP_INPUT, pass the PRPS-OBJNR get the internal number.
Now check that this internal number matches with DRAD-OBJKY.
Plz revert back.
BR,
Suhas

Can we join table with structure

Hi
i have taken fields from Plaf table and some fields from structures so now i want to join that how can i join.
Is there any option?
regards

Hi,
structure dont have any data base table associated with them so they dont have any data.
that's why we cannot join structure witha table but we can include a structure within any table.
Sytex to include structure in ztable:
fieldname data element.
.include struname
hope it will ans ur query.
Thanks
Rajesh Kumar

How can i join table with multiple colums

This is my Data-----------------------------------------------------DECLARE @StockIn TABLE
InID INT ,
StockID INT ,
InQty DECIMAL(16, 2) ,
Price DECIMAL(16, 2) ,
tranDate DATE ,
running INT
DECLARE @StockOut TABLE
OutID INT ,
StockID INT ,
OutQty DECIMAL(16, 2) ,
lineid INT ,
tranDate DATE
INSERT INTO @StockIn ( InID, StockID, InQty, Price, tranDate, running )
VALUES ( 1, 1, 15, 430, '2014-10-09', 1 ),
( 2, 1, 10, 431, '2014-10-10', 2 ),
( 3, 1, 15, 432, '2015-02-02', 3 ),
( 4, 2, 15, 450, '2014-08-05', 1 ),
( 5, 2, 6, 450, '2014-10-01', 2 ),
( 6, 2, 15, 452, '2015-10-02', 3 )
INSERT INTO @StockOut ( OutID, StockID, OutQty, lineid, tranDate )
VALUES ( 1, 1, 20, 2, '2014-10-11' ),
( 2, 1, 10, 4, '2014-10-12' ),
( 3, 2, 12, 8, '2014-11-01' ),
( 4, 2, 3, 8, '2014-11-02' );--------------------------------------------------------------------This is my query for calculate the total remaining of stock of any stockID-------------------------------------------------------------------- WITH RunningTotals as (
select StockID , Qty , price , total , total - qty AS PrevTotal, TranDate , rn FROM (
select
StockID, InQty AS QTY , Price
, SUM(InQty) over (PARTITION BY StockID order by tranDate , inQty DESC ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW) as Total
,ROW_NUMBER() OVER (PARTITION BY StockID ORDER BY tranDate , inQty DESC ) as rn
,TranDate --,TranID, TxnType
from @StockIn ) A -- runing stockID in stock order by tranDate
) , TotalOut as (
SELECT StockID , Sum(OutQty) AS QTY
FROM @StockOut
GROUP BY StockID -- Sum of outQty group by StockID
) , GrandTotal as
select
rt.StockID , rt.QTY AS original ,SUM(CASE WHEN PrevTotal > isNULL(out.Qty, 0) THEN rt.Qty ELSE rt.Total - isNULL(out.Qty, 0) END) AS QTY , Price , SUM(CASE WHEN PrevTotal > isNULL(out.Qty, 0) THEN rt.Qty ELSE rt.Total - isNULL(out.Qty, 0) END * Price) AS Ending , rt.TranDate from
RunningTotals rt
left join
TotalOut out
on
rt.StockID = out.StockID
where rt.Total > isNull(out.Qty , 0)
group by rt.StockID , Price , rt.TranDate , rt.QTY -- running OutQty out of inQty of any stockID
) Select * from GrandTotal order by stockID ------------------------------------------------------------
This query is run the total remaining of stock exactly right. But if i try to get the OutQty of stockID of any Line (lineid)The query duplicate data. this is Example------------------------------------------------------------ DECLARE @StockIn TABLE
InID INT ,
StockID INT ,
InQty DECIMAL(16, 2) ,
Price DECIMAL(16, 2) ,
tranDate DATE ,
running INT
DECLARE @StockOut TABLE
OutID INT ,
StockID INT ,
OutQty DECIMAL(16, 2) ,
lineid INT ,
tranDate DATE
INSERT INTO @StockIn ( InID, StockID, InQty, Price, tranDate, running )
VALUES ( 1, 1, 15, 430, '2014-10-09', 1 ),
( 2, 1, 10, 431, '2014-10-10', 2 ),
( 3, 1, 15, 432, '2015-02-02', 3 ),
( 4, 2, 15, 450, '2014-08-05', 1 ),
( 5, 2, 6, 450, '2014-10-01', 2 ),
( 6, 2, 15, 452, '2015-10-02', 3 )
INSERT INTO @StockOut ( OutID, StockID, OutQty, lineid, tranDate )
VALUES ( 1, 1, 20, 2, '2014-10-11' ),
( 2, 1, 10, 4, '2014-10-12' ),
( 3, 2, 12, 8, '2014-11-01' ),
( 4, 2, 3, 8, '2014-11-02' );
WITH RunningTotals as (
select StockID , Qty , price , total , total - qty AS PrevTotal, TranDate , rn FROM (
select
StockID, InQty AS QTY , Price
, SUM(InQty) over (PARTITION BY StockID order by tranDate , inQty DESC ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW) as Total
,ROW_NUMBER() OVER (PARTITION BY StockID ORDER BY tranDate , inQty DESC ) as rn
,TranDate --,TranID, TxnType
from @StockIn ) A
) , TotalOut as (
SELECT StockID , Sum(OutQty) AS QTY , lineid -- Group by stockID of any lineidFROM @StockOut
GROUP BY StockID , lineid
) , GrandTotal as
select
rt.StockID , rt.QTY AS original ,SUM(CASE WHEN PrevTotal > isNULL(out.Qty, 0) THEN rt.Qty ELSE rt.Total - isNULL(out.Qty, 0) END) AS QTY , Price , SUM(CASE WHEN PrevTotal > isNULL(out.Qty, 0) THEN rt.Qty ELSE rt.Total - isNULL(out.Qty, 0) END * Price) AS Ending , rt.TranDate , lineid from
RunningTotals rt
left join
TotalOut out
on
rt.StockID = out.StockID
where rt.Total > isNull(out.Qty , 0)
group by rt.StockID , Price , rt.TranDate , rt.QTY , lineid
) Select * from GrandTotal order by stockID ----------------------------------------------How can i running the total out (OutQty*price) of any lineid

Check this query, the date is excluded because it cannot return the result you want with and it will not be of any value to read the date like that in such a query:
DECLARE @StockIn TABLE
InID INT ,
StockID INT ,
InQty DECIMAL(16, 2) ,
Price DECIMAL(16, 2) ,
tranDate DATE ,
running INT
DECLARE @StockOut TABLE
OutID INT ,
StockID INT ,
OutQty DECIMAL(16, 2) ,
lineid INT ,
tranDate DATE
INSERT INTO @StockIn ( InID, StockID, InQty, Price, tranDate, running )
VALUES ( 1, 1, 15, 430, '2014-10-09', 1 ),
( 2, 1, 10, 431, '2014-10-10', 2 ),
( 3, 1, 15, 432, '2015-02-02', 3 ),
( 4, 2, 15, 450, '2014-08-05', 1 ),
( 5, 2, 6, 450, '2014-10-01', 2 ),
( 6, 2, 15, 452, '2015-10-02', 3 )
INSERT INTO @StockOut ( OutID, StockID, OutQty, lineid, tranDate )
VALUES ( 1, 1, 20, 2, '2014-10-11' ),
( 2, 1, 10, 4, '2014-10-12' ),
( 3, 2, 12, 8, '2014-11-01' ),
( 4, 2, 3, 8, '2014-11-02' );
WITH RunningTotals as (
select StockID , Qty , price , total , total - qty AS PrevTotal, TranDate , rn FROM (
select
StockID, InQty AS QTY , Price
, SUM(InQty) over (PARTITION BY StockID order by tranDate , inQty DESC ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW) as Total
,ROW_NUMBER() OVER (PARTITION BY StockID ORDER BY tranDate , inQty DESC ) as rn
,TranDate --,TranID, TxnType
from @StockIn ) A
) , TotalOut as (
SELECT StockID , Sum(OutQty) AS QTY , lineid -- Group by stockID of any lineid
FROM @StockOut
GROUP BY StockID , lineid
) , GrandTotal as
select
rt.StockID , rt.QTY AS original ,SUM(CASE WHEN PrevTotal > isNULL(out.Qty, 0) THEN rt.Qty ELSE rt.Total - isNULL(out.Qty, 0) END) AS QTY , Price , SUM(CASE WHEN PrevTotal > isNULL(out.Qty, 0) THEN rt.Qty ELSE rt.Total - isNULL(out.Qty, 0) END * Price) AS Ending , rt.TranDate , lineid from
RunningTotals rt
left join
TotalOut out
on
rt.StockID = out.StockID
where rt.Total > isNull(out.Qty , 0)
group by rt.StockID , Price , rt.TranDate , rt.QTY , lineid
) Select Distinct StockID,(select sum(original) from GrandTotal G where G.lineid = GrandTotal.lineid) as original,(select sum(QTY) from GrandTotal G where G.lineid = GrandTotal.lineid) as QTY,
(select sum(Price) from GrandTotal G where G.lineid = GrandTotal.lineid) as Price, (select sum(Ending) from GrandTotal G where G.lineid = GrandTotal.lineid) as Ending,lineid from GrandTotal
order by stockID
the result will be:
StockID original QTY Price Ending lineid
1 25.00 20.00 863.00 8635.0000 2
1 40.00 30.00 1293.00 12940.0000 4
2 21.00 21.00 902.00 9480.0000 8
Fouad Roumieh

AP541n with 2504 controller how to

is there a step by step guide on how to manage AP541n with a 2504 controller?
I have done the initial config on the 2504 but somehow the AP does not join and i can not find what would be a correct setting for the AP. How does that work anyway. In all documentation i found the AP somehow finds the controller, but in my case it does not.

Hello Frank,
I recently retired a number of 541's because they do not support an enterprise wireless configuration like you are attempting. Between themselves they can form a cluster but they are not able to join a with a controller.
You will need new access points to use with your WLC.

I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydas

Ok... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

I can not join my Apple extreme with the Apple express. I shows a conflict in the network! I've tried everything. How can they join on the same network?

I can not join my Apple extreme with the Apple express. I shows a conflict in the network! I've tried everything. How can they join on the same network?

It says that my DHCP has to be changed! How? to what?
It is 802.11g.express. but is set to default by the computer (Macbook Air).
The other is 802.11n. (express)
Extreme is 802.11.g. Is the Main Airport.
It is on ethernet & wep 128 security.

Hello i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to internet but another

hello
i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to internet but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem is remaining .is possible that to return to older version? if there is any solution share with me and i be very thankfulness of you.tanks again

It is not possible to downgrade to an earlier version.
Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update

Hello i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to inter net but another

hello
i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to inter net but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem is remaining . if there is any solution share with me and i be very thankfulness of you.tanks again

It is not possible to downgrade to an earlier version.
Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update

I have a Yamaha FC7 foot pedal and am trying to use it as a whammy bar type controller. Can I do this with anything in Mainstage? I also have Line 6 Pod farm 2 - anything in there?

I have a Yamaha FC7 foot pedal and am trying to use it as a whammy bar type controller. Can I do this with anything in Mainstage? I also have Line 6 Pod farm 2 - anything in there?
The foot pedal also seems to have an on/off switch that activates when it's depressed all the way. How do I set that up in Mainstage? Can I cycle between and effect and a volume pedal, for example?
Mainstage version is 2.1.3
Thanks for all help given.

Hi
Bruno Filipe wrote:
Thanks for the help but please don´t duplicate the answers. I´ve explain that to Chamie7
Noted, except that the OP clearly did not feel that your answer was helpful
Chamie7 wrote:
Sorry, no help there. Any guitar players know what I mean?
and
Bruno Filipe wrote:
You can use a keyboard or other controller (with jack like sustain) and then assign controller (normally 64) to what you want Mainstage to do.
This is unlikely to work if you plug an "Expression Pedal" such as an FC7 into a "Sustain Pedal" socket using MIDI CC64, which usually operates as a switch rather than a continuously variable value.
If I understood the OP's request correctly, the OP wanted to use the FC7 as a "Whammy Pedal", which does a PitchBend 'dive' effect (amongst other things)
http://en.wikipedia.org/wiki/DigiTech_Whammy
CCT

HT4623 How can I join 2 separate account one for my IPhone and one to my IPad to one account with the same ID and Password?

How can I join 2 separate account one for my IPhone and one to my IPad to one account with the same ID and Password?

You cannot combine two different Apple ID's into one ID.

Can cross join be used with other joins

hi,
Q1) is this syntactically correct , cross join with other joins like inner outer. like following.
select * from t1 cross join t2
inner join t3 on cast(t3.c1 as varchar) = (cast(t1.id as varchar) + cast(t2.t2 as varchar))
I have seen it works but wanted to know is it syntactically correct.
yours sincerely

Hi
First, Sorry, I wanted to VOTE (as I wrote) and not to Propose as answer :-)
Join are not necessarily executing in the order we write them. I can show simple example with tables that include the amount of rows is very different.
/**************************************************** DDL - Create tables */
CREATE TABLE T1 (
ID INT IDENTITY CONSTRAINT PK_T1 PRIMARY KEY,
MyValue UNIQUEIDENTIFIER DEFAULT NEWID()
CREATE TABLE T2 (
ID INT IDENTITY CONSTRAINT PK_T2 PRIMARY KEY,
MyValue UNIQUEIDENTIFIER DEFAULT NEWID()
CREATE TABLE T3 (
ID INT IDENTITY CONSTRAINT PK_T3 PRIMARY KEY,
MyValue UNIQUEIDENTIFIER DEFAULT NEWID()
GO
/**************************************************** DML - Populate Tables*/
SET NOCOUNT ON;
insert T1 (MyValue)
select top 100 null
from _ArielyAccessoriesDB.dbo.ArielyNumbers
GO
insert T2 (MyValue)
select top 500 null
from _ArielyAccessoriesDB.dbo.ArielyNumbers
GO
insert T3 (MyValue)
select top 10000 null
from _ArielyAccessoriesDB.dbo.ArielyNumbers
GO
/**************************************************** Play Time */
select T1.MyValue, T2.MyValue, T3.MyValue
from T3
join T2 on T2.ID = T3.ID
join T1 on T1.ID = T2.ID
GO
-- Check Execution Plan [EP]
-- Notice that SQL Server has changed the join order from T3-T2-T1 to T1-T2-T3 because it’s better that way.
-- You can notice that the order was by the number of rowns in tables from the smallest to the bigest SET
hope this is helpful :-)
[Personal Site] [Blog] [Facebook]

Can't join AP with WiSM controller

Similar Messages

Maybe you are looking for