Can't Load Mail - There was a problem loading the application

I can't access mail on iCloud after signing, and get this error message:
Can't Load Mail
There was a problem loading the application
I can see that there are five emails waiting for me.
Any thoughts on what's going wrong, please?

Open System Preferences > iCloud
Deselect the box next to Mail then reselect it.
Then try accessing your mail.
It may take a minute or two for iCloud to re sync the data.

Similar Messages

  • Hi, I am trying to update an iPhone 4 from iOS 4.3.3 to iOS 7.0.4, and every time I try to update it comes up with an error message saying that there was a problem because the network connection was reset. Is there any way I can get past this and update?

    The full message said:
    There was a problem downloading the software for the iPhone "Judy's iPhone 4". The network connection was reset.
    Make sure your network settings are correct and your network connection is active, or try again later.
    I am trying to update the iPhone for my grandmother, Judy, as I am leaving for Paris on Wednesday night and we want to have Facetime installed on her iPhone before then, so we can stay in contact with each other. It is the simplest way for this to happen but the program simply will not allow me to update her iPhone.
    Is there any way to get past this error and update her iPhone? Any help will be greatly appreciated.

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • Can't open file - error "There was a problem reading the layer data.."

    I'm on a
    Mac Pro, 10.5.7
    PSCS3
    I have been sent a file (148MB) from a client via FTP that I can not open. The file was created on a PC, using PSCS3.
    I'm usually pretty good at troubling shooting but I have not seen this before.
    Any help, suggestions would welcomed.
    I get the following error messages: (see attached)

    It looks like the atttachement did not work
    Here are the error messages:
    First message:
    "There was a problem reading the layer data. Read the composite date instead?"
    Second Message:
    "Could not complete your request because the file is not compatiable with this version of Photoshop."

  • Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.

    Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
    If a shortcut is used while Firefox is already open the error does not occur.

    As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
    Regards, Steve

  • For the last 2 days whenever I try to upload photos from my iPhoto page to facebook I get an error message: Bad Image There was a problem with the image file.  I haven't knowingly changed any settings on iPhoto or facebook. Can anyone help, please ?

    I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
    Bad Image
    There was a problem with the image file. 
    Please help.

    Can you drag it to the Desktop?

  • How can I back up ipad on icloud? Keep getting message "There was a problem completing the back up. Please try again later." I have, many times! The trouble shooting info does not resolve the problem.

    How can I back up ipad on icloud? I keep getting the message "There was a problem completing the back up. Please try again later." I have done so MANY times! I've followed the instructions ( I believe!) and the trouble shooting info does not resolve the problem. Can you please help?

    I had this exact same problem because the router i had in my house was having interference issues and the speed was too slow to do it.
    I would download a speedtest app on your iPad and see how fast your internet is.  I think the app is called speedtest in fact.

  • Error:  There was a problem in the store. If you wish to complete your purchase immediately, please call 800 0280148 but the phone number is a recorded message saying the store is closed today.  What can I do now?

    Hi.  I've just purchased Acrobat Pro but can't download and install it as I get the error message "There was a problem in the store. If you wish to complete your purchase immediately, please call 800 0280148"I.  When I call 800 0280148 I get a recorded message saying the store is closed until Monday.  Is there any way I can get my software today?
    Thank you, Mary

    you can download your software now and use the trial (which is the same as the full product except it's limited to 30 days use).  when you get your serial number you can convert your trial to the full non-time limited version by clicking help>sign in (or activate) so there's no need to uninstall, reinstall etc.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • TS3297 My downloaded song stops suddenly halfway through. I assume there was a problem with the download. Can I download the file again??

    My downloaded song stops suddenly halfway through. I assume there was a problem with the download. Can I download the file again?? Will I have to purchase the song again?

    You need to delete the current copy of the broken track from your library before it will be offered up for download. It may help to close and reopen iTunes.
    If the problem persists and you can't get a good version of the file contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
    tt2

  • PPoint OWA there was a problem verifying the certificate

    Hi, I installed Lync 2013 FE, edge and ARR. Recently, with your help, I finally made it work for web based meetings. People have A/V/Whiteboard/ but they are unable to use Share screens and PPoint. 
    I read that I need Office Web Application Server in order to make PPoint work so I followed online tutorial and installed it. As a certificate I at first used self signed but later as I added owa as SAN, I exported it from edge server and imported it in
    OWA Server. I am not sure if this is the way to do that.
    Error for share screen is that it is due to the network issues,
    Error for PPoint is "There was a problem verifying the certificate". Remote user use web browser in order to access meeting, upload the file without any problem, and it says Loading ..... , on the other side I have domain machine with lync client
    that receives notification to accept meeting content, after which error appears.
    Any ideas? 

    Hi all and thanks for your reply. 
    I used this command to create farm (didn't define internal fqdn)
    New-OfficeWebAppsFarm -ExternalURL https://lynweb.domain.com -CertificateName "ExternalCert"
    Everything went smoothly, I can access 
    https://owa.domain.local/hosting/discovery (but cert is shown as unsecured since url is not the same as in cert (Lyncweb.domain.com).
    Because I have split DNS, in my DNS I created lyncweb for the domain.com CNAME entry and I can successfully open https://lyncweb.domain.com/hosting/discovery form LAN.
    I found several mistakes in my config (at least I think so):
    1. In LyncFE I had under discoveryURL domain.local path, so this is why cert error was showing. It was able to access but because of the different URLs name that didn't match certificate name, I was getting an ssl error. - I changed it to lyncweb.domain.com/.....
    2. I didn't have external DNS name for lyncweb.domain.com. In fiddler I saw that it is trying to access to this URL and since it wasn't defined- therefor not able to access. - I created A host record.
    3. Firewall, since lyncweb was defined in ARR I needed to craete FW rule to let access OWA Server. - I added FW rule.
    Current situation is this:
    -- When I access through meeting.domain.com/Lync Client and start PPoint, on the remote client (teleworker where I started PPoint) presentation pops up on teleworker, I can go through the slides, but inside the LAN (second participant) on Lync Client or
    via meet.domain.com I am just getting "Loading ...." and nothing appears. (I tried disabling Firewall but didn't help - so it is not about firewall, especially since OWA and LyncCLient are in the same subnet)
    -- On the other hand when teleworker starts presentation and guest joins (both outside LAN), both can see  presentation.
    I thought that it is because I didn't have internal URL, so I added
    -InternalURL: https://lyncweb.domain.com
    Now I have both internal and external URL that is the same. But it didn't change the situation.
    Any suggestions?

  • There was a problem reading the layer data. Read the composite data instead?

    I can't open my psd with properly in Photoshop, it keeps showing :There was a problem reading the layer data. Read the composite data instead? 
    Photoshop cc
    Help please

    I just discovered this issue. Apparently if your PSD document has a tonne of layers, it will save normally. Then suppose you are working on it one day, and create lots of new additional layers...saving that will then corrupt the PSD file, as apparently the number of layers exceeds some hidden limit. You will not be able to load that back in, as Photoshop doesn't appear to allow you to do that.This issue appears for both PSD & PSB files. I lost a few weeks of updates, but recovered thanks to a few backups.
    One clue you can use to ensure you don't inadvertently save over the file (thereby corrupting it), is to try duplicating a layer or a group of layers. You will not have the option to do so. If you encounter that, immediately open a new file, and drag a few groups of layers to the new document (and deleting them in the original document). You should then go back below the 'limit', allowing you to save normally.
    As for the original corrupted file, well I tried repairing it with a whole host of tools. But nothing worked ....
    MacReady: Any way we can we fix it?
    Garry: It's gone, MacReady.

  • Windows 8.1 & office home business 2012 - Locks out ALL office programs * There was a problem sending the command to the program*

    Hello,
      I'm at wits end...BRAND NEW HP pavilion preloaded wit windows 8.1. Purchased a separate full version of Office 2012 Home and Business...downloaded it..loaded ...ran it....it runs fine ..UNTIL maintenance or other updates come through....then I receive
    a ** * There was a problem sending the command to the program**** and it lock out ALL office programs with the same message.
    My only fix has been to recover to a date BEFORE the updates or maintenance..and this works..UNTIL the updates or maintenance install....then it's Groundhog day all over again.
    I have tried all the suggested fixes I have found..NONE work..NONE!! And pray tell how you can get into advanced options or any other portion of the programs to turn off the DDE when you cant access the programs or initialize them at all!!!??
    SOS!!

    Hi,
    I have definitely heard your frustration, we can try these steps to check if it works. 
    Note: Before doing the following steps, please make a backup of your registry first.
    1. edit "HKEY_CLASSES_ROOT\Word.Document.12\shell\Open " and delete the "ddeexec" key.  The "ddeexec" key can also be deleted from "HKEY_CLASSES_ROOT\Word.DocumentMacroEnabled.12\shell\Open". 
    2. Change the registry for Word 2013 by right-clicking and saving:
    Windows Registry Editor Version 5.00 [-HKEY_CLASSES_ROOT\Word.Document.12\shell\Open\ddeexec] @="[REM _DDE_Direct][FileOpen(\"%1\")]" [-HKEY_CLASSES_ROOT\Word.Document.12\shell\Open\ddeexec\Application] @="WordView" [-HKEY_CLASSES_ROOT\Word.Document.12\shell\Open\ddeexec\Topic]
    @="System" [-HKEY_CLASSES_ROOT\Word.DocumentMacroEnabled.12\shell\Open\ddeexec] @="[REM _DDE_Direct][FileOpen(\"%1\")]" [-HKEY_CLASSES_ROOT\Word.DocumentMacroEnabled.12\shell\Open\ddeexec\Application] @="WordView" [-HKEY_CLASSES_ROOT\Word.DocumentMacroEnabled.12\shell\Open\ddeexec\Topic]
    @="System"
    3. Double-click the file after downloading to update the registry.
    For more detail information:
    http://www.dilloway.co.uk/there-was-a-problem-sending-the-command.html

  • When i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program

    when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
    i am using office2007  with windows7 premium home edition.  i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
    it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
    a real PITA.   anyone have any solution for this? Thanks 
    ken yanow

    Hi,
    Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
    Click the Microsoft Office Button, and then click Excel Options.
    Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
    check box in the General area.
    Click OK.
    If the problem cannot resolve, the Run as administrator may selected.
    Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
    Right-click EXCEL.EXE > Properties >
    Compatibility tab.
    Under Privilege Level, uncheck Run this program as an administrator
    check box.
    Best regards.
    William Zhou
    TechNet Community Support

  • I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message: "there was a problem downloading the software for the i

    I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message:
    "there was a problem downloading the software for the iPhone, the network connection could not be established".  This happens even though I have a working internet connection.
    Besides that, all the other functions work properly, even synchronize apps and library.
    Will I be able to update the software?

    look around the forum tons of people repport that they can't update
    makes you suspect that apples update servers can't meet the depand of too many users
    trying to update at once

  • Excel won't open and error message There was a problem sending the command to the programe

    Hi there
    I'd be grateful for your help.
    I've just bought a new laptop and installed Office 2013.  I used Excel 2013, did what I needed to do and saved it.  This was 5 days ago.
    Today, I've tried opening the file from my desktop and get the error message 'There was a problem sending the command to the program'.
    And when I try to open Excel to do the DDE fix, which seems to be the best suggestion, I can't open Excel at all.  I've tried to get into it from the Apps screen.
    Any help would be gratefully appreciated.
    Thanks

    Don't seem like this can be fixed so I went back to version 6.0.2 which works good.
    I have Chrome now as my default browser and will not use fire fox until they fix it!
    Chrome works great!

  • I created one apple I'd when I started using the iPad.  After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing.  Pls adv how I change this to my new apple Id.

    I created one apple I'd when I started using the iPad.  After some days, I had to create a new apple id
    as there was some problem with the first one. Now at some places still my old apple Id is appearing.  Pls adv how I change this to my new apple Id.

    Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
    The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
    To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad. 
    Go to Settings->iTunes & App Stores->Apple ID->Sign out.
    Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

Maybe you are looking for