Can't log into Application Manager CS6 MC

Hi all -
When I try to log into my CS6 Applciation Manager, it's reply is "Unable to contact Adobe". All was working fine two days ago.
Via the Chat Window, I contacted a CSR that helped me reset my password ... but that did NOT solve my problem. Then the CSR stated there is no issue ... and did not seek to help me out any further.
I am able to log into my Adobe account to see my purchases, serial numbers, profile, etc...
But I still am not able to log into the Application Manager.
What am I missing here?
I can provide more details if need be.

Thanks for your reply Mylenium.
OK, now I can log into my Adobe (website) account and see my purchases, serial numbers, etc. .... AND ..... I am now able to log into my Applications Manager!!
I did not do anything different from the other past few days; didn't load or download any software, nothing. Strange, but I'm glad it's back to normal now.
Figures; when I go and seek out assistance ... it fixes itself.
Thanks again ... and I hope this does not re-occur!!

Similar Messages

  • Can't launch Adobe Application Manager CS6 for MAC

    When I try to launch the application, I get a "AdobeApplicationManager quit unexpectedly" message with a very long report containing "Problem Details and System Configuration" which is sent to Apple automatically.
    The "Updates" function within each application (Photoshop, Bridge, etc.) works just fine.

    Albertos35110529 are you trying to install the Creative Cloud Desktop application or are you trying to open it?  If it is already installed then you will want to open it from the Applications folder.  You can find more details regarding the installation process at Help | Download, install, update, or uninstall apps.

  • Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, anyone had this problem and has advice?

    Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, some sites will log in but only if the stay logged in box is not checked,I'v have cleared my cashe and internet history looked through securtity setting but nothing, anyone had this problem and has any advice?

    See KB Article:  http://support.apple.com/kb/HT1274 Changing or resetting an account password
    my current country does not have a apple store....
    AS are not the only places that repair Macs.  Check out the following:
    International AASP’s & Other Services
    AASP's Outside of the USA
    How to find your nearest Apple Authorized Service Provider (AASP)
    Also, there are User Groups that can possible help.

  • Can't sign into Folio Builder CS6.

    Hi.
    I have been strugling with this issue all day. I am currently on Adobe Indesign CS6 (Not the cloud version) and I installed Adobe Folio Builder successfully. Everything works fine except that I cannot sign into folio builder. When I click on the sign in button nothing happens. I have looked into other posts from people with the same problem but none of the solutions that worked for them have worked for me. I tried clearing my preferences, reinstalling Desktop tools a few times and reinstalling adobe application manager but no luck. PLEASEEEEE Help!

    You will receive replies (like this one). Here's the link:
    Can't sign into Folio Builder CS6.

  • Can't log into PowerShell and EAC on Exchange 2013 Server

    I'm not sure why but I my Exchange PowerShell can't log into my Exchange server and I can't access the EAC
    via localhost or the URL. 
    I did notice that I enabled HTTP Proxy in IIS and that I used Application Route Requesting with it but I went ahead
    and reversed all those changes. I also noticed that the physical path for each sub-site in Default Web Site goes to the HTTP Proxy version of that folder instead of the ClientAccess one. I changed each folder to the clientaccess one but that didn't help. I
    did some research on this and I saw that I had to enable the kerbauth in the modules area and I did that to. I restarted IIS and WebRM and that still didn't help. 
    The Exchange Management Shell error: 
    New-PSSession : [exchangeserver.domain.net] Connecting to remote server exchangeserver.domain.net failed with the
    following 
    error message : The client cannot connect to the destination specified in the request. Verify that the service
    on the 
    destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service 
    running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following 
    command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more
    information, see 
    the about_Remote_Troubleshooting Help topic. 
    At line:1 char:1 
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ... 
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin 
    gTransportException 
    + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed 
    On the web when I try to access EAC on our URL and not localhost, I get this error: 
    400 
    Bad Request :( 
    The request sent by your browser was not valid 
    On localhost, I just get a page cannot be found.

    Hello
    tip:
    Check Get-owavirtualdirectory | fl and Get-ECPVirtualDirectory | fl and make sure that you using “Form based Authentication” and “Basic Authentication”
    and check Control Panel\All Control Panel Items\Credential Manager for saved password.
    and http://goo.gl/IC5P4S
    sorry my english

  • Exchange 2013 - Admins can only log into one ECP server

    Simple run down of my environment:
    • Two AD sites (Site1 and Site2)
    • One 2008 R2 domain controller at each site (DC1 w/ FSMOs and DC2) running AD forest function level 2008 R2
    • One 2012 Std server with Exchange 2012 Std CU3 at each site (EX1 and EX2) – CAS/MBX on both, No DAG
    • Half of mailboxes on each server
    Using https://webmail.domain.com for all of our internal and external virtual directories. Adding /OWA or /ECP will get you into the respective site from either internal or external.
    All Domain Admin/Exchange Admin (Organization Management) do NOT have mailboxes. Those individuals can log into ECP from https://webmail.domain.com/ecp, or FQDN or IP of EX2 only. If John Smith has no mailbox then he must use:
    https://webmail.domain.com/ecp
    or
    https://ex2.domain.com/ecp
    or
    https://10.16.109.31/ecp
    If EX2 goes offline or they use https://ex1.domain.com/ecp or https://10.16.108.31/ecp then none of the admins can login and they get the following:
    Use the following link to open this mailbox with the best performance:
    https://webmail.domain.com/owa/auth.owa
    X-FEServer: EX2
    Date: 2/18/2014 10:37:42 PM
    s ECP or the https://webamil.domain.com/ecps ECP.
    They can access EMS from either server and run Get-ECPVirtualDirectory and it shows what we would expect:
    – https://webmail.domain.com/ecp
    – https://webmail.domain.com/ecp
    Why can an admin with no mailbox only log into the ECP on EX2? What is forcing the login to EX2 only? How can I move that “forced login” to EX1 if we ever get into a situation where EX2 is having problems? What happened in Active Directory or Exchange that
    made EX2 the primary login server for ECP and OWA? My FSMOs are located at Site 1…the same location where EX1 is located. The same server that I cannot log into ECP directly.
    ~Rick

    Any admin that is mail enabled can then only log into the server that hosts his mailbox. Admins without mailboxes can only log into EX2. And again, all admins can log into https://webmail.domain.com/ecp unless one of the servers goes offline
    and that's when the problems occur. Nothing obvious or unusual regarding mail flow. Done various internal and external tests and have not seen anything obvious or in the logs.
    Yesterday's change that MS Support had me do was to delete the ExternalURL for the ECP virtual directories. No difference. So, my latest update from MS Support that requested me to try today's change...
    set-owavirtualdirectory “owa (default web site)” -RedirectToOptimalOWAServer $false
    After performing an IIS reset and making sure replication had completed there was no difference. So, I am now forced to wait till Monday for MS to respond if the pattern stays at one email per day.
    Has anyone with multiple servers at different AD sites been able to log directly into the either server like I'm trying? I get this problem in my labs and I even had MS, while on the phone, remote in to make sure I was setting it up properly.
    The guy on the phone never said if their labs do the same thing cause they don't have multiple AD sites in their labs. In my lab if I have two servers at each site then I can log into both servers at the site, but not the other site. It appears it becomes
    site dependent then.
    MS has taken numerous logs and they are acting like this is the first time they've seen this. Yet I can reproduce it with no problem time after time. I'll create new VMs and start all over from scratch and make this happen every time I create a new AD/Exchange
    environment (it does take me a while to build all those VMs from scratch). No fancy GPOs to AD and no radical changes to the Exchange servers. Other than obvious config changes to make sure email can flow internally and externally, this is pretty much out
    of the box.
    ~Rick

  • Can't log into itunes. It says there was an error with itunes. Can't even log in from my ipod touch

    I am new to Apple. I recently got an Ipod touch and created an apple ID. while I can log into the manage account section, am unable to log into itunes on the computer or the ipod. I have windows 7. Am also not able to log into other apps such as facetime etc.
    Please help!

    Hi shrutsd,
    After reading your post, it seems you are unable to access your Apple ID. Have you attempted to reset your password then try logging again? 
    Here are the steps for resetting your password:
    Apple ID: Changing your password - Apple Support
    Learn how to change your Apple ID password.
    Follow these steps to change your Apple ID password. If you can't remember your password, follow the steps for what to do if you forget your Apple ID password.
    Go to My Apple ID (appleid.apple.com).
    Click “Manage your Apple ID” and sign in.
    If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you're unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
    Click "Password and Security".
    In the "Choose a new password" section, click Change Password. 
    Enter your old password, then enter a new password and confirm the new password. Click Save when done.
    The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
    If you forgot your Apple ID password - Apple Support
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • Upgraded to i0s7 can't log into chase bank

    I upgraded to ios7 yesterday and now I can't log into chase bank. It says can't log in because can't remember password.

    Hello chucklori,
    Thank you for the details of the issue you are experiencing with your Chase app after upgrading to iOS 7.  I recommend reviewing the following resources for an issue like this:
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    iPad - Application Assistant
    https://www.apple.com/support/ipad/assistant/application/
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Error while logging into applications in R12(21.1.3)

    Hi,
    We are getting below error while logging into applications in R12 (12.1.3).
    **"You have encountered an unexpected error. Please contact the system administrator for assistance"**
    Everytime we face this issue, we will bounce OACORE services then the issue will not occur again.
    Can you please help me in finding permanent fix for this issue?
    FYI,
    I have performed the following debugging steps to check the issue further
    1.     Enabled FND diagnostics at the site level .
    2.     Added following lines in ocj4.properties file
    AFLOG_ENABLED=true
    AFLOG_LEVEL=statement
    AFLOG_MODULE=% (% captures all - preferable to use products such as fnd, ies, por)
    AFLOG_FILENAME=/tmp/test.log
    3.     Examined the output from aoltest.jsp. Please find the attached AOL-J diagnostics test file.
    Then I have reproduced the issue, and examined all the log files but couldn’t find any error information.
    Thanks,
    Srinivasulu.

    Everytime we face this issue, we will bounce OACORE services then the issue will not occur again.
    Can you please help me in finding permanent fix for this issue?
    Then I have reproduced the issue, and examined all the log files but couldn’t find any error information. If bouncing the services fixes the issue, then there must be some details about the error in the logs.
    R12, 12.1 - How To Enable and Collect Debug for HTTP, OC4J and OPMN [ID 422419.1]
    How to enable Apache, OC4J and OPMN logging in Oracle Applications R12 [ID 419839.1]
    Thanks,
    Hussein

  • Why can I log into some websites on my MacBook Pro and not on my MacPro?

    Only just started happening...I have used 3 different browsers on my MacPro and still can't log into some webpages where a password is required.
    Flickr, eBay, some on line shopping sites....
    i have deleted cookies, cache, history, everything. Reinstalled the application (Firefox and Safari) but nothing.
    Go to my new MacBook Pro and it connects..
    I plan to do a full combo download and install of 10.6.8 however can't work out what's broken? I use Virus Barrier and MacScan but have (I believe) turned them off.

    Thanks for the advice everyone.
    Working through them without much luck...
    New user didn't help.
    Have turned off MacScan.
    No improvement as yet.
    P.S. Not sure how MacScan and Virus Barrier X would interact as they seem to do different things... I got both of these as apps in bundles so didnt really specifically buy them.
    I can't see any proxy setting in network preferences so will need to go into virus barrier and check.
    Reading the "recommended text" on Virus's for homework.
    Tomorrow it will be Appzapper for them both if the patient shows no sign of improvement.

  • HT4798 I can not log into my computer to download an app.   I wrote it down but it is not working. I can not find a way to access it or reset it?  help

    I can not log into my computer to download an app.  my password is not working. i wrote it down but it is not working.
    is there a way to reset this or have it emailed to me?  this is different from my apple ID password.

    Only you have the password. No one can email it to you.
    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.
    For Snow Leopard and earlier with installer DVD
         Mac OS X 10.6- If you forget your administrator password,
         OS X- Changing or resetting an account password (Snow Leopard and earlier).
    For Snow Leopard and earlier without installer DVD
        How to reset your Mac OS X password without an installer disc | MacYourself
        Reset OS X Password Without an OS X CD — Tech News and Analysis
        How To Create A New Administrator Account - Hack Mac

  • I can't log into Tumblr.I'm trying to creat a account there.It goes tosecond stage when asking year and confirmation.After thatstage it is not responding furthe

    I can't log into Tumblr.I'm trying to create a account there.It goes to second stage when asking year and confirmation.After that stage it is not responding further.And I am using win 32 bit with Mozilla 30 version.Please help me some one.bye

    Many site issues can be caused by corrupt cookies or cache.
    * Clear the Cache
    '''[https://support.mozilla.org/en-US/kb/how-clear-firefox-cache?redirectlocale=en-US&redirectslug=clear-cache-delete-temporary-files-fix-issues How to clear the Firefox cache]''' {web link}
    and
    * Remove Cookies
    ''This will log you out of all sites you're logged in to. ''
    Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Privacy.'''
    Under '''History''', select Firefox will '''Use Custom Settings'''.
    There is a button on the right side called '''Show Cookies'''.
    If there is still a problem,
    '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
    While you are in safe mode;
    Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites and see if there is still a problem. Then restart.

  • Created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion.

    I have created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion.  These accounts are for my kids and originally were setup with parental controls and time constraints.  Thinking this was the problem I removed the time constraints, removed the parental controls, deleted and re-added them, and made them standard users.  I have reinstalled, used disk utility to repair permissions, and made them admins.   Any help is appreciated.

    Users don't need Apple ID's. That's not the issue. Have you tried repairing permissions their accounts?
    http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/
    Repairing User Permissions in OS X Lion
    You’ll need to reboot to perform this, and then use the same resetpassword utility that is used to change passwords in Lion, but instead choosing a hidden option.
    When you use the Disk Utility app and Repair Permissions — it doesn’t actually repair the permission settings on folders and files in your Home folder where your documents and personal applications reside.
    In Lion, there is an additional Repair Permissions application utility hidden away. This tool is located inside boot Repair Utilities. Here’s how to access it.
    Restart Lion and hold down the Command and R keys.    You will boot into the Repair Utilities screen. On top, in the Menu Bar click the Utilities item then select Terminal.
    In the Terminal window, type resetpassword and hit Return.
    The Password reset utility launches, but you’re not going to reset the password. Instead, click on the icon for your Mac’s hard drive at the top. From the drop-down below it, select the user account where you are having issues.
    At the bottom of the window, you’ll see an area labeled ‘Reset Home Directory Permissions and ACLs’. Click the Reset button there.
    The reset process takes a couple of minutes. When it’s done, quit the programs you’ve opened and restart your Mac. Notice that ‘Spotlight’ starts re-indexing immediately.

  • I can't log into a website - Facebook

    == Issue
    ==
    Firefox is having problems with certain web sites
    == Description
    ==
    i'can't log into the website called facebook.com with mozilla though i like it.
    == URL of affected sites
    ==
    http://www.facebook.com
    == Troubleshooting information
    ==
    tchatting site with friends pictures,videos etc....
    == Firefox version
    ==
    3.6.6
    == Operating system
    ==
    Windows XP
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6
    == Plugins installed
    ==
    *-Default Plug-in
    *Yahoo Application State Plugin version 1.0.0.7
    *My Web Search Plugin Stub for 32-bit Windows
    *Npdsplay dll
    *DRM Store Netscape Plugin
    *DRM Netscape Network Object

    See:
    * https://support.mozilla.com/kb/Cannot+log+in+to+websites
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • New users can't log into /mydevices or /profilemanager

    Hi all,
    I've got Profile Manager up and running and have deployed about 25 iPads using the current setup.
    My configuration has not changed but all of sudden, new users created today can not log into /mydevices or /profilemanager.  Says the username or password is incorrect, but they're entered properly.  Again, the configuration of the server has NOT changed since users entered (and working) last week.
    Anyone have this issue?  If anyone can shed some light, I'd really appreciate it.
    Apple: Lion Server is buggy as ****.  Profile Manager is buggy as ****.  I've spent hours on the phone with Apple support with one issue after another.  I'm getting sick of the instability and crankiness of Lion Server.  These forums are chalked full of people having such a massive range of issues that I can only draw one conculsion: Lion Server is half baked.
    Please help (again),
    Chris

    I got my problem solved - and here is a few things to note and some steps to resolve the issue.
    1) you do not need to create augmented users - unless you need extra settings for local logins (you most likely won't have users logging into your mav) - if you are using AD that is - if not just create local users
    2) server is buggy - perhaps - but after dealing with this issue for a few days - as much as i want to agree with it i want to say that now it is running very smoothly - and it boils down to order of steps in the install
    4) do not change hostnames once it's set up - that will scre it up even worse
    here is what i woudl suggest to blow it away and reset it up
    1) system pref - users and groups - login options - network account server - edit - unjoin the domain
    2) blow away your open directory and profile manager in command line
    sudo /usr/share/devicemgr/backend/wipeDB.sh
    sudo slapconfig -destroyldapserver
    3) reset apache web config
    sudo /serveradmin command web:command=restoreFactorySettings
    4)make sure your hostname is correct
    5) join domain (if needed)
         on command line veryfiy ad is working by typing
         user "username" where username is username of AD user
    6) if AD set up - check dns search order - make sure no local host (127.0.0.1) is in the list
         system preferences - network - ethernet - advanced -dns - remove 127.0.0.1 if there (only if using AD)
    6) server admin - open directory - settings - change - set up as standalone
    configure yoru ldap server - this will reissue signing authority certificate that you will need if you want to sign your configurations profiles for clients (iOS and Mac)
    7) then configure profile manager
    Reboot after step 2 - step 3, step 6
    if you have a firewall infront of the server there will be aditinal ports required for SCEP
    http://support.apple.com/kb/TS1629
    you will need port 80,443 and 1640
    If you have a reverse proxy you will need to set up a trust to the cetificate on the proxy to the authority configured in the open ldap - different topic - but just tought it was worth mentioning

Maybe you are looking for

  • Report in same window

    i am running a report from my Oracle 9i Application( Developer Suite 9i). I am calling the report from the form. The report which has to open in a new IE browser window is not opening which was happening about 3 days back. The applet instance blinks

  • Urgent Help on XML

    Hi all, I am new to XML. I have a text variable say for example: v_doc_text := '<emp> <empno no="3">1</empno> <fname>robert</fname> <lname>smith</lname> <sal>1000</sal> <job>engineer</job> </emp>'; I want to load this xml data into table or pl/sql va

  • HOW TO CAPTURE A DESK TOP VEDIO

    I WOULD LIKE TO BE ABLE TO CAPTURE A VEDIO TUTORIAL FROM MY DESK TOP. IS THERE A SIMPLE AND FREE APPLACATION TO ACHIVE THIS? THANKS FOR YOUR RESPONSE GOD BLESS

  • Variable Length Files and ABAP

    I have a comma delimited file that is of a variable length. The first 5 fields are fixed, but then I have a counter field and then 2 fields that repeat for each counter.  So if the counter field was 3, I’d have 6 additional fields, but if the counter

  • Is there any way to recover data from a cleared soft partition?

    Is there any way to recover data from a cleared soft partition? <eom>