Can't log on to Internet

I can't get my iPhone 4S to log on to my friends Internet connection but my brand new iPad with retina display logged on immediately with very few prompts. What am I doing wrong? Or is it that my iPhone's processor isn't as up to date as the new iPad?

1. Turn router off for 30 seconds and on again.
2. Settings>General>Reset>Reset Network Settings.

Similar Messages

I have qualitynet either wired internet. I buy a card good for a month at a time, I can only log into one device at any one time. Are there settings I can adjust on my airport express to allow all my devices to connect to wi-fi without having to log out.

I have qualitynet either wired internet. I buy a card good for a month at a time, I can only log into one device at any one time. Are there settings I can adjust on my airport express to allow all my devices to connect to wi-fi without having to log out of one devise before using another?

Some Internet providers that limit access to a single device at a time do so by the device's hardware MAC address. If your ISP is one of those, you may be able to substitute the MAC address of your AirPort Express base station for the computer. I would suggest that you contact them to find out if this is allowable.

Why can't I log onto my Internet banking

I have never had a problem logging into my Internet banking website, until I updated to ISO 6. What do I need to do in order to be able to log in?

How could we possibly know? You haven't even mentioned which of the thousands of banks there are worldwide you use, let alone what actually happens when you try to log in.
Perhaps you should contact the Help Desk of your bank... maybe they can advise.

Can't log on to my banking website(M&T) but I can in Internet Explorer. Happened within the last week or 2.

Can't log on to my online banking site, but it works in IE:
https://onlinebanking.mandtbank.com/SignOn.aspx
https://www.mtb.com/personal/Pages/Index.aspx
Gives me a system error(no error code)

I have the same problem and am currently using Firefox 18. I cannot sign into my bank's website. The page just freezes, Firefox stops responding and I have to completely log off my computer to get it to close out. I have tried the following:
# uninstalled Firefox
# reinstalled Firefox
# cleared the cache
# cleared cookies
# disabled the add-ons
# uninstalled Firefox again
# downgraded to 17.0
# started in safe mode
# reset Firefox
# cleared all personalized data
After each step I'd try logging into the bank and then after logging off my computer, logging back on, clearing the cache, and making sure the cookies were still clear I'd move on to the next step. I've tried everything but absolutely nothing works. I can access my bank site through Internet Explorer and I can also use Firefox on my Android phone! I'm getting thoroughly disgusted with Firefox!!!!!!!!!! I need to be able to access my bank account and I cannot stand Internet Explorer. Fix it MOZILLA!

Can't log in to Netflix HP installed on my TouchSmart but I can via the Internet

I can log in to Netflix just fine via Chrome or Explorer. Netflix also works fine streaming on an XBox and a Roku Box. But...I can't log in via the pre-loaded HP Netflix program.

Hello tgcisme:
You need to resink the computer's clock. O.K. Left click on the desktop screen clock lower right side. Select adjust date and time. Click on Iternet time tab. New window appears check mark Synchronize with an Internet server. Sever box click on the upside down triangle select any of the goverments time sink listed. Click on update now. Close out clock windows. Now check and see if you can use Netflex from HP. Repeat these steps if you are still un able to log Netflex from your computer but change the time sever. You should be able to use it again ounce your computer is in time sink. I discovered this when Windows time went down durring a bad storm. Like you I was not able to use it until I figured it out by trial and error and spending two days HP Direct Support witch they weren't able to figure it out. I have asked them repeated to post the solution to Netflex. Unable to log on with Netflex.
You should be all set now.

I log on with internet explorer and ican view videos from my att homepage , why can't i with firefox ?

I log on with internet explorer and i can go to select videos from my att homepage. When i log on with firefox and i go to the same videoes i can see the advertisement and then it tells me the video is no longer available. How can we fix this ?

This is a direct download link: [http://www.mozilla.com/products/download.html?product=firefox-4.0.1&os=win&lang=en-US Download Firefox 4.0.1] Download it to your desktop.
Just in case Firefox is still installed, please do the following.
Go to Add/Remove Programs in Windows Control Panel, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (don't checkmark the box).
Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox
Finally run the installation file you downloaded to the desktop earlier.
If you don't see Mozilla Firefox in Add/Remove Programs, then it's not installed.

Updated software on 1st gen. ipad now I can'y log onto internet

Updated sofware on my ipad now I can't log onto wifi

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.

Can not log on after successfull installation - SAP Netweaver Trial JAVA

Hello,
I have successfully downloaded and installed the NW Java trial. (NW_JAVA_700SP14_SR3.rar)
I can see in SAP MMC that all the services was started. At http://vjm:50000 I can see the default page.
Unfortunately I can not log on to any page that need SAP authentication (eg. User management, NW administrator),
but can log to pages which needs just basic browser authentication (eg: Web Service Navigator, UDDI client, System Information).
The portal also does not let me log on (http://vjm:50000/irj ).
When I get the standard SAP NW log on screen, after entering Administrator with the correct master password, simply the log on screen appears again (the password field is cleared). I also tried some incorrect user name / password just to check the difference. In that case I got the correct error message.
I installed the software with WMware, Windows 2003 server, allocated enough disk space and 1.6Gbyte RAM. The installation finished without errors. Prior, I installed the MS loopback too (tried without it too). In SAP MMC everything is green, only have an open alert in J2E 00 -> Services -> Security -> Aggregated Data -> Invalid session count "262 > 200 last reported value above treshold".
I am using the standard internet explorer coming with Win2003 server.
Tried the users: Administrator, SDM, Guest, ADSUSER. I know that the password is correct, because I don't get any error if I use it, just getting the log on screen back ...
Could anyone pls help me how can I log on to the system? Or is there any security trace file or log which could help me solve this problem?
I am desperately trying to install this trial, I completely reinstalled the software 5 times but still can not use it
Laszlo

Hi,
is your problem persisting?
CAVE: If you use a wrong user/pw combination > 3 times the account of the user may be locked!
try j2ee_admin instead of administrator or try adm together with your Masterpassword
Do you have to specify the users pw inside the installation procedure? In "normal" installations this has to be done.
If not the pw´s in the documentation of the previous answer`may fix your problem.
The sap mmc is irrelevant for user authentication.
Green means your system is running, nothing else.
kind regards
Tom

I'm trying to log on to Vtalk, but I can't log in because an error pops up saying 'request timed out'

I'm trying to log on to Vtalk and my mail, but the 'timed out' error keeps popping up and I can't log in. I know it's not a wifi strength issue, I can get on the Internet and Skype perfectly fine, but not any app that needs an email. Help!

Right, it works perfectly when I'm connected to another wifi source, but even if I download the app elsewhere and try to use it at home, no dice :/ Same with my email app. I can check my email by using a web browser app and going on to the site but the app itself won't update unless I'm connected to another wifi source.

Can no longer connect to internet with wireless router.

For almost a year I've had a wrt54g ver 6 connected on my computer with my cable modem and my sons computer with the compatible pci card. Everything worked fine until a few days ago, I came home and could not get on the internet with my computer. My son could, but not me. I didn't change anything at all. So I reinstalled the router drivers and I still can't connect to the internet, but now neither can the other computer. What could be the problem?
michele

it sounds like you might have to clone the mac address of the computer that was originally connected to the cable modem. clone mac address can be found on setup tab after log into router.

Recent freezing and shutting down every down 10-15 minutes and hard to log in to internet very slow

My son has 2009 Macbook white version and recently (last week or so) freezing all the time, cannot log on to internet, and shuts down every 10-15 minutes. Is there a download (free hopefully to clean it up for any spyware or maleware). He is a student and very busy in University and cannot be without the computer?

He will need something to back up onto like an external hard drive. The disks are necessary if the hard drive needs to be repaired, you can't repair the boot volume so you need to start up from an install disc and run Disk Utility from there. When you talk to him have him resettle SMC and pram, sometimes unexpected shutdowns can be corrected that way. The freezing is another issue, I'm concerned with the health of his hard drive. Another thing to ask when you talk to him is how much total space and how much free space does his hard drive have?
To reset the SMC
MacBook and MacBook Pro
Laptops with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Newer Mac portables with a battery you don't remove
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Can't log in to AirPort Extreme but I am connected to the network

So I am trying to log into my AirPort Extreme base station. My password is not working.
I am able to connect to the internet and the rest of the network, I just can't log into the Base station through the AirPort utility. I have other wireless devices that are connected to the network and they have no problems.
I tried reseting the Base station as described in the help files and using the default password "public", but that doesn't seem to work either. Am I not reseting the Base station properly? I don't know. I held the button with the tip of the pen, the light on the front went yellow/orange.
I am at a loss. I need to see my network settings and correct some port forwarding issues.
Any help would be great.
Thank you

If all your counter measures fail then power off the modem and router. Disconnect all ethernet to the router. Power on the modem. Power on the router then do a reset then connect ethernet.

I can't log into the Itunes store,says I need to update my security but the link won't open in Explorer, bad http!

I can't log into the Itunes store with my Apple ID.Says I need to update my security but the link doesn't work,bad http.Get internet explorer canot connect message.

Good day Goose253501,
It sounds as though your iPhone is having some difficulty accessing the App Store servers when attempting to sign in. I would suggest that you troubleshoot using the steps in this article -
Can't connect to the iTunes Store - Apple Support
Thanks for using Apple Support Communities.
Safe computing,
Brett L

I have a problem in imessages I can not log on

I have a problem in imessages I can not log on and update through the application.Every time you logon work shows me a message saying "The server encountered an error processing registration. Please try again later"

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
Step 3
From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or obviously invalid, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 4
Back up all data, then take the steps suggested in this support article.
There are five steps in that article. Please take all of them. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 5
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 6
Select from the menu bar
 ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 7
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 8
Boot in safe mode and log in. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
Step 9
Reset the NVRAM.
Step 10
Reinstall OS X.
Step 11
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

"An error occurred during activation. Try again." Can't log into iMessage on Macbook for past two weeks.

iMessage worked fine on my Macbook until about two weeks ago. I can use iMessage for gMail, but my iCloud account is inactive and I get the error message "An error occurred during activation. Try again." when I try to log in with any apple ID. It works fine currently on my iMac and my iOS devices.
I have tried many suggestions, including checking the serial number, various time & date configurations, trying an alternate Apple ID, restarting, signing in and out of iCloud, and inspecting the keychain.

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
 ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Reset the NVRAM.
Step 12
Reinstall OS X.
Step 13
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

Can't log on to Internet

Similar Messages

Maybe you are looking for