Can't patch mobile 6 client package to Oracle Lite 10.3

hi,
I installed Oracle lite 10.3 successfully, and try to install oracle client patch for mobile 6. I do this according to the readme,but failed,the message says,
Oracle Interim Patch Installer version 1.0.0.0.57
Copyright (c) 2007 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
Oracle Home : d:\olite10g_1
Oracle Home Inventory : D:\olite10g_1\inventory
Central Inventory : C:\Program Files\oracle\inventory
from : N/A
OUI location : D:\olite10g_1\oui
OUI shared library : D:\olite10g_1\oui\lib\win32\oraInstaller.dll
Java location : "D:\olite10g_1\jre\1.4.2\bin\java.exe"
Log file location : d:\olite10g_1/.patch_storage/<patch ID>/*.log
Creating log file "D:\olite10g_1\.patch_storage\6344826\Apply_6344826_03-10-2008_10-13-37.log"
ERROR: OPatch failed during pre-reqs check.
any help? thank u

Ok, I finally found it.....
Oracle Database Lite Administration and Deployment Guide Release 10.3 (E12089-02)
7.4.3.1 Enable a Platform for Your Mobile Client
Not all of the possible platforms are enabled on the Mobile client setup screen. To enable a platform for your client device, do the following:
On the Mobile Devices screen, click Platforms.
On the Platforms screen in the Search pulldowns, select the language and either Disabled or All and click Go.
Select the platform name that you want to enable.
Enable the device by selecting Yes in the Enable pulldown.
Click OK. The device is now enabled and will be visible in the client setup screen.
=====================================================================
I was on the Platform screen before, but missed the "Enabled" setting under Search. I looked at the screen and saw only the enabled list, and assumed this was 'all' of the platforms....
Once I switched the search setting from "Enabled" to "All" I saw my disabled SQLite options.
7.4.3.1 was under 7.4.3 Extend or Create a Custom Platform. Wasn't trying to do either of these, so never looked under there before. Only ran into it when I was going to attempt to create a custom SQLite platform.
I thought it was just a bad setting somewhere.... Just couldn't find where....
Thanks for all who looked at my question and userBDBDMS-Oracle for trying to help.

Similar Messages

Packaging in oracle lite webtogo 5.0.0..urgen

I want to use webtogo for my application to work online/offline..
i am trying to use the packaging wizard for publishing all the objects to the
mobile server.
i have succeeded in publishing all my jsp's, servlets, beans and tables and
sequences and views and indexes onto the mobile server using the respective
panels in the packaging wizard.
But i have some stored procedures also which are used by my application. if my
application has to work offline, i think all these stored procs also have to be
available in the offline mode. How can i publish these java stored procedures..
thanks a lot.

9ilite is not like your normal database, it basically rides ontop of another database like 8.1.7 enterprise. The lsnrctl you need to start is for the database that you install 9ilite into.
ie - to get it all running:
set oracle home to your main db
start listener
set oracle home to your 9ilite home
start 9ilite processes as required.

Administer defrag remotely for Oracle lite client database?

Hi all,
My client has installed Oracle Lite version 10.3.0.3. Oracle Lite Database file (ODB) tends to grow too large. Oracle recommends resizing the Oracle Lite database by running Defrag.exe tool. But it has to be installed manually on each handheld device. Does anyone know how to administer Defrag.exe remotely from Oracle Lite Server or can it be done in another way?
Thanks.

user6998712 wrote:
Hi all,
My client has installed Oracle Lite version 10.3.0.3. Oracle Lite Database file (ODB) tends to grow too large. Oracle recommends resizing the Oracle Lite database by running Defrag.exe tool. please post URL where this is documented

Error when installing Oracle Lite for Mobile Field Service Laptop

Hi,
I am facing a strange problem when installing Mobile Field Service Laptop agent "Oracle Lite" on my laptop.
When I run the setup, it asks me username and password, after entering the information, when I proceed, I see setup window which displays below messages
"Authenticating with server... "
Please wait. This may take several minutes ...
Then it hangs for several minutes, approx 5 to 10 mins, and then gives message
"Could not connect to server: HTTP/1.0 502 Bad Gateway"
I am not able to proceed with setup.
But none of my other colleagues are facing this issue, even though the network, proxy settings and java version are same.
Any idea about this error?
Regards,
Mohammed

I thought polite.ini us required....how r u using MFS without polite.ini?

Date format for oracle lite client database

hello....
When data is entered opened on the oracle lite webtogo OC4J client is giving the following errors:
JBO-25009: Cannot create an object of type:java.sql.Date with value:2/21/08 12:00 AM
JBO-27014: Attribute CreationDate in AppModule.ApplicantIncomesView1 is required
JBO-27024: Failed to validate a row with key oracle.jbo.Key[85685 ] of type AppModule.ApplicantIncomesView1
Which date format is supported on the OC4J client?The application has been developed using Jdeveloper JSF/ADF BC technology.

user6998712 wrote:
Hi all,
My client has installed Oracle Lite version 10.3.0.3. Oracle Lite Database file (ODB) tends to grow too large. Oracle recommends resizing the Oracle Lite database by running Defrag.exe tool. please post URL where this is documented

How can I add a patch to an existing package?

I really want to add a patch to Archlinux klibc package.
http://git.debian.org/?p=kernel/klibc.g … 571d2c979d
http://repos.archlinux.org/viewvc.cgi/k … core-i686/
But the more I read about contributing, the more confusing it gets. Wiki first page would take me to AUR, but it looks like AUR is only for adding new packages. So I find out about ABS which is for creating a custom package, but what steps to take to get the changed package to replace the existing? And should I actually be doing it this way? Maybe there are tools to introduce git patches automatically? I really don't understand...
I realize this is a newbie problem, but the wiki organization is confusing to me, so if anyone would provide links to answer my questions I'd be very happy.

edgg wrote:what steps to take to get the changed package to replace the existing? And should I actually be doing it this way?
ABS is exactly how you want to do this.
* install and run abs as described in the wiki page
* copy the files in /var/abs/core/klibc to your build directory (I have a builds directory in my home directory)
* edit the PKGBUILD to add your patch (man PKGBUILD will help here)
* make the package with makepkg (there is a wiki page for makepkg)
* use pacman to install it: pacman -U klibc-blahblah.pkg.tar.gz
The process is shockingly easy. And the great thing is that, since you've installed the package with pacman, you can use pacman to remove it if you change your mind. There is also a way to keep pacman from upgrading it when you do pacman -Syu (see pacman.conf).
The process is also described here: http://wiki.archlinux.org/index.php/ABS … he_ABS_way

SCCM 2012 R2 Configuration Manager Client Package - stuck "In Progress"

Hi Team; I’m having 2 issues with SCCM 2012 R2:
Issue 1: I'm having a strange issue with the default XXX00002 package - "Configuration Manager Client Package",
it will not deploy to the Secondary Site DP. The console is saying "In Progress" - below is the output from the
distmgr.log file.
~Package BDC00002 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6032 (0x1790)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00002, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.444+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00002. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~SourceVersion (1) of package BDC00002. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~Package BDC00003 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6092 (0x17CC)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00003, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.464+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6032 GMTDATE=Mon Mar 17 20:00:23.476 2014
ISTR0="Configuration Manager Client Package" ISTR1="BDC00002" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="BDC00002"
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.477+240><thread=6032 (0x1790)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.476+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.484+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.476+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.495+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00003. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.496+240><thread=6092 (0x17CC)>
~SourceVersion (1) of package BDC00003. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.497+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6092 GMTDATE=Mon Mar 17 20:00:23.510 2014
ISTR0="Configuration Manager Client Upgrade Package" ISTR1="BDC00003" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400
AVAL0="BDC00003" $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.510+240><thread=6092 (0x17CC)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.510+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.515+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.510+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.526+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\1sfb1dbj.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.571+240><thread=6032 (0x1790)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.572+240><thread=6032 (0x1790)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.574+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\abaibh8y.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.637+240><thread=6092 (0x17CC)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.683+240><thread=6092 (0x17CC)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.685+240><thread=6092 (0x17CC)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:26.886+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.948+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.950+240><thread=4900 (0x1324)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:31.934+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.021+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.023+240><thread=4900 (0x1324)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.108+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.111+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:06:28.094+240><thread=4968 (0x1368)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:30:52.271+240><thread=2936 (0xB78)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.002+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.977+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.979+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:06:55.337+240><thread=4968 (0x1368)>
Issue 2: I'm trying to deploy a couple of Packages/Applications using SCCM 2012 R2 running on Win2K8 R2 with no luck, knowing that I could install the packages
on a test VM “in the DataCenter site”, but when trying to deploy the packages to production PC “in the Office Site”,
the status is packages deployment compliance stuck at 0%
Infrastructure:
3 SCCM servers: CAS, PRI & SEC. Both CAS and PRI are in the DataCenter site, and SEC is in the Office site. The office site has several IP subnets.
Boundaries are configured through Forest Discovery “IP Ranges and AD Sites” since that the AD site should contain all the IP subnets that the AD site contains, Boundaries groups are also configured and a site reference
server is configured for each group respectively.
A OU based Collection has been configured that contains 13 PC "the collection contains the PCs that the packages should be installed.
Packages/Applications are configured correctly since that I could successfully deploy the packages to the test VM which is on the same subnet as the CAS and the PRI servers "the DataCenter subnet". The issue
is that I can't deploy the packages to production PCs in the Office subnet!
Firewall rules are configured and applied via GP, and I even turned Windows Firewall off, and still nothing! I tried to manually initiate Computer Policy download via the SCCM GUI and via a script, still no luck!
I tried configuring IP Subnet Boundaries, still no luck!!
Here are the last 2 lines in the LocationServices.log of a client PC at the Office Site:
<![LOG[MPLIST requests are throttled for 00:00:44]LOG]!><time="14:47:00.766+240" date="03-17-2014" component="LocationServices" context="" type="2" thread="5776"
file="lssecurity.cpp:4528"> <![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="14:47:00.777+240" date="03-17-2014" component="LocationServices" context="" type="1"
thread="4884" file="lsad.cpp:770">
And here are the last 4 lines in the ClientLocation.log
<![LOG[Rotating assigned management point, new management point [1] is: BBK-SCCM-PRI.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:04.880+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6311">
<![LOG[Assigned MP changed from <BBK-SCCM-PRI.bbk2310.com> to <BBK-SCCM-PRI.bbk2310.com>.]LOG]!><time="14:49:04.891+240" date="03-17-2014" component="ClientLocation" context="" type="1"
thread="3600" file="lsad.cpp:1532"> <![LOG[Rotating proxy management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:05.345+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6374">
<![LOG[Rotating local management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="14:49:05.786+240"
date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6436">
It looks like clients in the Office Site can’t connect to the DP/MP of the Secondary Site server which is also a DP.
While on the PC that the application was installed on I see the folowing in the LocationService.log:
<![LOG[Distribution Point='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSPKG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1', Locality='LOCAL', DPType='SERVER', Version='7958', Capabilities='<Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities>', Signature='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSSIG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1.tar', ForestTrust='TRUE',]LOG]!><time="14:42:59.506+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="lsutils.cpp:415"> <![LOG[Calling back with locations for location request {144620BC-4BF0-4878-9554-F67D305ECCF8}]LOG]!><time="14:42:59.522+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="replylocationsendpoint.cpp:220">
Is there something wrong with the Distribution point on the Secondary Site server?
Please help…
Thanks..

Update:
I fixed the issue with the default XXX00002 package - "Configuration Manager Client Package", it will not deploy to the Secondary Site DP. I did that through "Update Distribution Points" option, and after a while the status was 100%.
However; the second issue is still unsolved...
Please help..

Nokia mobile VPN Client - split tunneling

Hi
I'm trying to get Nokia mobile CPN Client working with split tunneling on a Cisco firewall.
I have full access to all on my internal lan's when I make the VPN tunnel, so tunnel is up and working.
But I do not have access to anything in the internet, it tries to route internet requests through the VPN. I have set split tunneling on the Cisco firewall and it is working as intended on all other devices.
Any ideas of what I have missed?
My policy is based on the bundled Cisco_ASA_pskxauth.pol from the Nokia mobile VPN Client Policy Tool.
tsfts

Hi vgta2k:
Nokia 5530 XpressMusic is S60 5th edition phone.
http://www.forum.nokia.com/Devices/Device_specifications/5530_XpressMusic/
It runs different version of Nokia Mobile VPN client than Symbian^3. You can find the correct version at the download page:
http://europe.nokia.com/support/download-software/nokia-mobile-vpn/compatibility-and-download
Just use the device selector and pick your phone.
You can also find Nokia Mobile VPN Client nowadays at Ovi Store.
Thanks,
Ismo

Unable to copy hidden package "Configuration Manager Client Package" to local DP

Content status lists it as successfully distributed to all DPs (including the local site server)
However, component status for SMS_DISTRIBUTION_MANAGER continually logs these events:
Distribution Manager failed to process package "Configuration Manager Client Package" (package ID = CDW00001).
Possible cause: Distribution manager does not have access to either the package source directory or the distribution point.
Solution: Verify that distribution manager can access the package source directory/distribution point.
Possible cause: The package source directory contains files with long file names and the total length of the path exceeds the maximum length supported by the operating system.
Solution: Reduce the number of folders defined for the package, shorten the filename, or consider bundling the files using a compression utility.
Possible cause: There is not enough disk space available on the site server computer or the distribution point.
Solution: Verify that there is enough free disk space available on the site server computer and on the distribution point.
Possible cause: The package source directory contains files that might be in use by an active process.
Solution: Close any processes that maybe using files in the source directory. If this failure persists, create an alternate copy of the source directory and update the package source to point to it.
NOTE: It appears to not be any of these causes.
If I look at the smsdpmon.log on the server in question, the following is logged every half hour:
Intializing DP Monitoring Manager...    SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting monitoring thread priority SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting content library root path SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting site code SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting algorithm ID SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to find algorighm ID from registry. Use default algorithm. SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting DP Cert Type SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to find DP cert type from registry. Use default type. SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting this DP NALPath SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to create certificate store from encoded certificate..
An error occurred during encode or decode operation. (Error: 80092002; Source: Windows) SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to initialize DP monitoring object. Error code: 0x80092002 SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
distmgr.log shows the following:
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BRICK-CONFIGMGR.corp.COMPANY.com SITE=CDW PID=2212 TID=2124 GMTDATE=Wed Jan 02 19:29:45.109 2013 ISTR0="CDW00001" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="CDW00001"   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Retrying package CDW00001   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
No action specified for the package CDW00001.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Start validating package CDW00001 on server ["Display=\\BRICK-CONFIGMGR.corp.COMPANY.com\"]MSWNET:["SMS_SITE=CDW"]\\BRICK-CONFIGMGR.corp.COMPANYNAME.com\...   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Failed to start DP health monitoring task for package 'CDW00001'. Error code: -1   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Updating package info for package CDW00001   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Only retrying local DP update for package CDW00001, no need to replicate package definition to child sites or DP info to parent site.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
StoredPkgVersion (2) of package CDW00001. StoredPkgVersion in database is 2.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
SourceVersion (2) of package CDW00001. SourceVersion in database is 2.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BRICK-CONFIGMGR.corp.COMPANYNAME.com SITE=CDW PID=2212 TID=2124 GMTDATE=Wed Jan 02 19:29:45.213 2013 ISTR0="Configuration Manager Client Package" ISTR1="CDW00001" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="CDW00001"   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Failed to process package CDW00001 after 41 retries, will retry 59 more times   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Exiting package processing thread.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Used 0 out of 3 allowed processing threads.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:50 PM   3784 (0x0EC8)
Sleep 1825 seconds...   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:50 PM   3784 (0x0EC8)

Both errors are certificate related. Is there anything special about your configuration such as special ACLs on the certificate store or FIPS compliance mode (see
http://support.microsoft.com/kb/811833) being enabled?
Nothing special with certificates; I've used the basic stuff for intranet management of clients.
The only related thing I can think of that may have affected this, is that I discovered earlier today that my MP installation got hosed (error 500) due to a broken client install on the site server itself. I uninstalled the client manually and the server
(as indicated by the component status views) appears to have repaired the MP install. Perhaps it didn't repair it completely? Would a site reset do me any good?

Can we declare a Cursor in Package Specs?

Dear buddies
Can I Declare a Cursor in Package Specs so that I can call that cursor and use its data in some procedures and functions of package. Otherwise I've to write that cursor for every sub-program of a package which I don't feel a smart way to accomplish the job.

Hi,
here is a short example with the whole way down. Maybe the concept is getting clearer with this:
first of all, if you do not have the table emp, here the DDL for this example.
Be carefull, works only for german clients because of the names of months, sorry for that.
CREATE TABLE EMP
(EMPNO NUMBER(4) NOT NULL,
ENAME VARCHAR2(10),
JOB VARCHAR2(9),
MGR NUMBER(4),
HIREDATE DATE,
SAL NUMBER(7, 2),
COMM NUMBER(7, 2),
DEPTNO NUMBER(2));
set echo on
INSERT INTO EMP VALUES
(7369, 'SMITH', 'CLERK', 7902,
TO_DATE('17-DEZ-1980', 'DD-MON-YYYY'), 800, NULL, 20);
INSERT INTO EMP VALUES
(7499, 'ALLEN', 'SALESMAN', 7698,
TO_DATE('20-FEB-1981', 'DD-MON-YYYY'), 1600, 300, 30);
INSERT INTO EMP VALUES
(7521, 'WARD', 'SALESMAN', 7698,
TO_DATE('22-FEB-1981', 'DD-MON-YYYY'), 1250, 500, 30);
INSERT INTO EMP VALUES
(7566, 'JONES', 'MANAGER', 7839,
TO_DATE('2-APR-1981', 'DD-MON-YYYY'), 2975, NULL, 20);
INSERT INTO EMP VALUES
(7654, 'MARTIN', 'SALESMAN', 7698,
TO_DATE('28-SEP-1981', 'DD-MON-YYYY'), 1250, 1400, 30);
INSERT INTO EMP VALUES
(7698, 'BLAKE', 'MANAGER', 7839,
TO_DATE('1-MAI-1981', 'DD-MON-YYYY'), 2850, NULL, 30);
INSERT INTO EMP VALUES
(7782, 'CLARK', 'MANAGER', 7839,
TO_DATE('9-JUN-1981', 'DD-MON-YYYY'), 2450, NULL, 10);
INSERT INTO EMP VALUES
(7788, 'SCOTT', 'ANALYST', 7566,
TO_DATE('09-DEZ-1982', 'DD-MON-YYYY'), 3000, NULL, 20);
INSERT INTO EMP VALUES
(7839, 'KING', 'PRESIDENT', NULL,
TO_DATE('17-NOV-1981', 'DD-MON-YYYY'), 5000, NULL, 10);
INSERT INTO EMP VALUES
(7844, 'TURNER', 'SALESMAN', 7698,
TO_DATE('8-SEP-1981', 'DD-MON-YYYY'), 1500, 0, 30);
INSERT INTO EMP VALUES
(7876, 'ADAMS', 'CLERK', 7788,
TO_DATE('12-JAN-1983', 'DD-MON-YYYY'), 1100, NULL, 20);
INSERT INTO EMP VALUES
(7900, 'JAMES', 'CLERK', 7698,
TO_DATE('3-DEZ-1981', 'DD-MON-YYYY'), 950, NULL, 30);
INSERT INTO EMP VALUES
(7902, 'FORD', 'ANALYST', 7566,
TO_DATE('3-DEZ-1981', 'DD-MON-YYYY'), 3000, NULL, 20);
INSERT INTO EMP VALUES
(7934, 'MILLER', 'CLERK', 7782,
TO_DATE('23-JAN-1982', 'DD-MON-YYYY'), 1300, NULL, 10);2. Package Spec:
create or replace
package test_cursor as
--Type for the returncode of the function
TYPE typ_emp IS TABLE OF emp%rowtype;
--Array for fetching, of course also possible in the body
t_emp typ_emp;
--function wich returns the array from fetching the cursor
function get_emp return typ_emp;
--function for manupilation data retrieved by the function
PROCEDURE man_emp;
end test_cursor;3. Package Body
create or replace
package body test_cursor as
FUNCTION get_emp RETURN typ_emp AS
cursor c_emp is select * from emp;
BEGIN
    open c_emp;
    fetch c_emp BULK COLLECT INTO t_emp;
    CLOSE c_emp;
    --t_emp returns the whole table set from emp
    return t_emp;
end get_emp;
PROCEDURE man_emp AS
--just for not confusing names, is the same as t_emp of course
v_emp_array typ_emp;
BEGIN
    --call the function and retrieve the whole data set
    v_emp_array := get_emp;
    --now manipulate the data, in this case just write the names to the calling client
    FOR rec IN v_emp_array.FIRST .. v_emp_array.LAST
    loop
      dbms_output.put_line(v_emp_array(rec).ename);
    end loop;
end man_emp;
end test_cursor;4. Calling the procedure
SET serveroutput ON
exec test_cursor.man_emp;5. And this is the result:
anonymer Block abgeschlossen
SMITH
ALLEN
WARD
JONES
MARTIN
BLAKE
CLARK
SCOTT
KING
TURNER
ADAMS
JAMES
FORD
MILLERPlease be aware, this is just for demonstration purpose, of course it makes no sense to display the names this way. But how to call a funktion returning arrays with datasets from fetching cursors is shown here.
Hth
Joerg

Help:How can I run the J2EE Client Application? Thanks

Help:How can I run the J2EE Client Application that will access the remote J2EE1.4 application server which runs on another host computer?
I have developped a stateles senterprise java bean name converter and deloyed it in the j2ee1.4 application server on the host machine A. The converterbean provides the remote home interface and remote interface. At the same time I have developped the j2ee application client named convertappclient. When I access the conveter bean at host computer A through the script 'appclient.bat' as 'appclient -client convertappclient.jar', the client can access the bean sucessfully. Now I want to access the bean through the script 'appclient.bat' at host computer B,what files should I copy from host computer A to host computer B;and what the command line should be like? Thanks!
The following are the code of the enterprise java bean and it's home interface .
The client code is also provided.
The enterprise java bean:
package converter;
import java.rmi.RemoteException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import java.math.*;
public class ConverterBean implements SessionBean {
BigDecimal yenRate = new BigDecimal("121.6000");
BigDecimal euroRate = new BigDecimal("0.0077");
public ConverterBean() {
public BigDecimal dollarToYen(BigDecimal dollars) {
BigDecimal result = dollars.multiply(yenRate);
return result.setScale(2, BigDecimal.ROUND_UP);
public BigDecimal yenToEuro(BigDecimal yen) {
BigDecimal result = yen.multiply(euroRate);
return result.setScale(2, BigDecimal.ROUND_UP);
public void ejbCreate() {
public void ejbRemove() {
public void ejbActivate() {
public void ejbPassivate() {
public void setSessionContext(SessionContext sc) {
The bean's remote home interface :
package converter;
import java.rmi.RemoteException;
import javax.ejb.CreateException;
import javax.ejb.EJBHome;
public interface ConverterHome extends EJBHome {
Converter create() throws RemoteException, CreateException;
The bean's remote interface:
package converter;
import javax.ejb.EJBObject;
import java.rmi.RemoteException;
import java.math.*;
public interface Converter extends EJBObject {
public BigDecimal dollarToYen(BigDecimal dollars) throws RemoteException;
public BigDecimal yenToEuro(BigDecimal yen) throws RemoteException;
The j2ee application client:
import converter.Converter;
import converter.ConverterHome;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.rmi.PortableRemoteObject;
import java.math.BigDecimal;
public class ConverterClient {
public static void main(String[] args) {
try {
Context initial = new InitialContext();
System.setProperty("java.naming.factory.initial","org.jnp.interfaces.NamingContextFactory");
System.setProperty("java.naming.provider.url","jnp://10.144.97.250:3700");
Context myEnv = (Context) initial.lookup("java:comp/env");
Object objref = myEnv.lookup("ejb/SimpleConverter");
ConverterHome home =
(ConverterHome) PortableRemoteObject.narrow(objref,
ConverterHome.class);
Converter currencyConverter = home.create();
BigDecimal param = new BigDecimal("100.00");
BigDecimal amount = currencyConverter.dollarToYen(param);
System.out.println(amount);
amount = currencyConverter.yenToEuro(param);
System.out.println(amount);
System.exit(0);
} catch (Exception ex) {
System.err.println("Caught an unexpected exception!");
ex.printStackTrace();
}

Surprisingly I find an upsurge in the number of posts with this same problem. I recently found a post which gave a nice link for this. Follow the steps and it should help:
http://docs.sun.com/source/819-0079/dgacc.html#wp1022105

Error: "Mobile java client attributes not maintained" while activating DO

Hi All,
i got error while activating the Data Object: "Mobile java client attributes not maintained".
how to resolve this error, and why this error is coming?
I am migrating the MI 2.5 application into the MI 7.1 application.In new MI 7.1 application some synbo's are imported using the text file and some new data objects are created. Imported synbo's are activated successfully, but newly created objects are not activated because of the above error.
Can we solve above error or is there any restriction that in Migration project ( project with backward compatibility ) we can't create new Data objects?
Thanks & Regards
Siva Sankar Nulaka.

Hi Siva,
Please refer to following document for the solution.
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0036580-ab90-2c10-b7a4-f71ba4f43096&overridelayout=true|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0036580-ab90-2c10-b7a4-f71ba4f43096&overridelayout=true]
It should solve your problem.
Thanks & Regards,
Abhijit

What is a patch level in supporting package?

hai pals,
can u pls help me out know , what is an patch level in supporting packages ?.
right answers will be appreciated.
with regards,
raj

Hi Raj,
A Support package is a collection of corrections for an SAP product and the level specifies the version of an SAP system with regard to the Support Packages that have previously been imported.
Bye
Dinesh

With out portal server can we enable mobile mail?

for example i using only messaging server,is it possible to enable mobile mail?
if iam using portal ,i can use MAP to enable mobile mail,but with out using portal how can i enable mobile mail?
plz give me the sugg.
thanx

If you're using a fully-capable web browser, why would you need a gateway? Just hit the webmail url, and you're done.
If you would rather use a "fat" client, Messaging is fully capable of responding to any client that talks IMAP or POP. No gateway needed.

Instant Client Package - SDK, RPM package download not working

Hi,
I am trying to download "Instant Client Package - SDK", RPM package for Linux 32 bit, version 11.2.0.1.0 from http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/linuxsoft.html
However the file downloaded has zero length. I tried from two different computers. I cannot find any contact/form to report broken content on that website. Can someone help, please?
Cheers, Tomas

fyi
For me, the page ...
http://www.oracle.com/technology/software/products/database/index.html
... currently says ...
"An error occurred while processing the request. Try refreshing your browser. If the problem persists contact the site administrator"
But, with the direct URL to the ZIP, which failed to download before ...
http://download.oracle.com/otn/nt/oracle10g/10201/10201_companion_win32.zip
... I was able to download it just now.
regards
Jan

Can't patch mobile 6 client package to Oracle Lite 10.3

Similar Messages

Maybe you are looking for