Can't reaches the target host!!!

Hi guys,
I’m trying to send a message trough receiver SOAP adapter. The message reaches the portal but stops on the WebSphere log! It means that can’t find the servelet, or maybe the path to the web service!?!?
In j2ee monitor the status is: “The message was successfully delivered to the application using connection AFW.”
The web service -> http://sw01das1.appl.edinfor.pt:9080/PGS/servlet/rpcrouter
I used the wsdl provided by WebSphere to create this interface!!!
The WebSphere log:
09-05-2006 10:12:37:296 BST] 0000002e ServletWrappe E   SRVE0026E: [Servlet Error]-[rpcrouterversion=3.0&MessageClass=ApplicationMessage&ProcessingMode=asynchronous&MessageId=44589723-c05d-003b-0200-0000ac1e0e2a&TimeSent=2006-05-09T09:12:32Z&Sender.Party=::&Sender.Service=P1100&Receiver.Party=::&Receiver.Service=WebService&Interface=http:]: java.lang.ClassNotFoundException: rpcrouterversion=3.0&MessageClass=ApplicationMessage&ProcessingMode=asynchronous&MessageId=44589723-c05d-003b-0200-0000ac1e0e2a&TimeSent=2006-05-09T09:12:32Z&Sender.Party=::&Sender.Service=P1100&Receiver.Party=::&Receiver.Service=WebService&Interface=http:
     at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code))
     at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code))
     at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
     at java.beans.Beans.instantiate(Beans.java:202)
     at java.beans.Beans.instantiate(Beans.java:63)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper$3.run(ServletWrapper.java:1463)
     at com.ibm.ws.security.util.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.loadServlet(ServletWrapper.java(Compiled Code))
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:1391)
     at com.ibm.wsspi.webcontainer.extension.WebExtensionProcessor.createServletWrapper(WebExtensionProcessor.java:86)
     at com.ibm.ws.webcontainer.extension.InvokerExtensionProcessor.handleRequest(InvokerExtensionProcessor.java:244)
     at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2933)
     at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:221)
     at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:210)
     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java(Compiled Code))
     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java(Compiled Code))
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java(Compiled Code))
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java(Compiled Code))
     at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java(Compiled Code))
     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java(Compiled Code))
     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java(Compiled Code))
     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java(Compiled Code))
     at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java(Compiled Code))
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java(Compiled Code))
Anyone knows what’s happening?
Thanks in advance,
Ricardo.

Hi Ricardo,
Based upon the log text, it looks like a servlet error on the webspehere side. Its missing a class file in the webservice.
Check if the webservice is available by tesing it in a browser using the Webservice link.
Thanks
Prasad

Similar Messages

  • How to find the target host

    Hi All,
    I need to configure ADS for that I am following steps given in 'ADS configuration guide', according to 5.3.2 step 6 I need to enter the target host ( j2ee engine that runs adobe document services) and  service no. I am not able to find it.
    Can someone tell me how can we find the target host and service no.

    Hi All,
    I need to configure ADS for that I am following steps given in 'ADS configuration guide', according to 5.3.2 step 6 I need to enter the target host ( j2ee engine that runs adobe document services) and  service no. I am not able to find it.
    Can someone tell me how can we find the target host and service no.

  • HT4623 i have ios 4 version and when i try to update my iphone to the latest version it with itunes it can't reach the update server. what should i do?

    i have ios 4.3.3 version and when i try to update my iphone to the latest version it with itunes it can't reach the update server. what should i do?
    p.s.: i don't have any cinnection problem.....

    It could be the fact that your hosts file is directing itself to gs.apple.com Cydia not gs.apple.com Apple,
    Hope it helps
              http://support.apple.com/kb/TS3694
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • Can't reach the print button on the bottom of the page

    When the page preview page appears, I can't reach the print button at the bottom of the page.

    To use AirPlay, you will need the following:
    iPhone  4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
    Apple TV (2nd or 3rd generation)
    AirPort Express
    Wi-Fi (802.11a/g/n) network

  • I can't reach the firefox home page, I'm stuck on the tutorials, and I need to access my flash settings for firefox mobile. What do I do?

    Basically I need to reach my firefox settings, so that I can automatically enable flash for every website. But I can't reach the settings, and every route that involves firefox leads me back to a tutorial -_-. I really need help.

    Yeah, what phones model you used ?
    To enables flash in firefox for android
    # just go to Menu > More > Setting
    # Tap Plugins in the Content section. The Plugins context menu appears.
    # To enable Flash to play for all websites by default, tap Enabled.
    # To disable plugins for all websites, tap Disabled.
    I am sorry if i am wrong, please let us know your problem :D

  • Given an alias created by the Finder, from the Unix prompt (e.g., in Terminal) how can I get the target of the alias?

    In my Finder windows I have numerous aliases that point mostly to other folders. When in the Terminal, these aliases present as regular files. How can I get the target of an alias so that I can perform some operation, e.g., "cd", on the target?

    This AppleScript demonstrates how to resolve the OS X alias and return a POSIX path for it
    set af to choose file
    tell application "Finder"
      if the kind of af is "alias" then
      set origFile to the POSIX path of ((original item of af) as text)
      end if
    end tell
    display dialog origFile

  • I can not reach the screen to enter passcode, the main sreen is where im stuck, i cant play music, the home button works but icant get pass the whole unlock thing, i can receive calls but can answer because when i touch the screen it wont do.

    i can not reach the screen to enter passcorde, the main screen is where im stuk, i cant play music,i can recive calls

    Try to Reset your device. 
    Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off that shows up first).

  • I have applied to the iTunes affiliate program and received my affiliate token successfully. However, I want to use the web iMix, however I need a web developer identifier and secret phrase. I can't reach the web i mix affiliate program! Can anyone help??

    I have applied to the iTunes affiliate program and received my affiliate token successfully. However, I want to use the web iMix, however I need a web developer identifier and secret phrase. I can't reach the web i mix affiliate program! Can anyone help??
    You can find the full description here: http://www.apple.com/itunes/affiliates/resources/documentation/itunes-store-web- imix.html
    I have sent an email for weeks now to the e-mail shown here http://www.apple.com/itunes/affiliates/resources/ and haven't had a single response from them. PLEASE HELP!!
    Thank you!

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • Can't activate my iphone, I connected to wifi and can't reach the activating system

    I connect the iphone to wi-fi and get a message that says that Iphone can't reach the activationg system, please help!!!!this happens after I restore the Iphone

    Was your phone ever locked to a different phone carrier?

  • How can I sort the target list in debug form.

    If I want to select a procedure/function to debug it is very hard to find it if the package contains a lot of procedures. How can I sort the target list. I did not find anything in the preferences. Thanks.

    Sorry, can't be done. You can request this at the SQL Developer Exchange though, so other users can vote and add weight for possible future implementation.
    My suggestion (if you decide to request it): base the order in the dialog on the order inside the navigator tree (location in the source by default, but possible by name or type/name - see tree's context menu).
    Regards,
    K.

  • VPN Client can't reach router or hosts, but can reach other connected sites.

    We have a VPN client configuration on a 2901 router. The client passes authentication and connects fine. When connected, cannot reach the 2901 or any devices directly behind it, BUT can reach routers and hosts that are connected to the same 2901 through site to site connections.
    Few notes:
    I have added some lines excluding NAT in a few different ways, but does not resolve.
    I have switched the RAP rool from 10.96.20.x to 172.21.20.x and can then connect to the local host. Appears to be a routing issue to the 10.x network, but I can't seem to find the solution.
    Any help would be greatly appreciated. Here is the config:
    boot-start-marker
    boot system flash
    boot system flash:c2900-universalk9-mz.SPA.153-2.T.bin
    no ip domain lookup
    ip inspect log drop-pkt
    ip inspect name FIREWALL tcp
    ip inspect name FIREWALL udp
    ip inspect name FIREWALL ftp
    ip inspect name FIREWALL fragment maximum 256 timeout 1
    ip inspect name FIREWALL ntp
    ip inspect name FIREWALL pptp
    ip inspect name FIREWALL dns
    ip inspect name FIREWALL l2tp
    ip inspect name FIREWALL pop3
    ip inspect name FIREWALL icmp router-traffic
    no ipv6 cef
    crypto isakmp policy 1
    encr aes
    authentication pre-share
    group 2
    crypto isakmp policy 5
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp policy 10
    encr 3des
    hash md5
    authentication pre-share
    group 2
    crypto isakmp policy 95
    authentication pre-share
    group 2
    crypto isakmp policy 99
    hash md5
    authentication pre-share
    group 2
    crypto isakmp policy 110
    hash md5
    authentication pre-share
    crypto isakmp client configuration group VPN-RAS
    key *********
    dns 10.96.17.2 10.1.200.50
    wins 10.96.17.2 10.1.200.50
    domain mine.com
    pool RAPOOL
    acl SPLIT
    save-password
    split-dns mind.com
    netmask 255.255.255.0
    crypto isakmp profile USERS
       match identity group VPN-RAS
       client authentication list DOMAIN
       isakmp authorization list VPN-RAS
       client configuration address respond
       keepalive 300 retry 5
    crypto ipsec transform-set AES128 esp-aes esp-sha-hmac
    mode tunnel
    crypto ipsec transform-set 3DES esp-3des esp-sha-hmac
    mode tunnel
    crypto ipsec transform-set DES esp-des esp-md5-hmac
    mode tunnel
    crypto ipsec transform-set 3DES-MD5 esp-3des esp-md5-hmac
    mode tunnel
    crypto ipsec transform-set DES-SHA esp-des esp-sha-hmac
    mode tunnel
    crypto ipsec transform-set myset esp-3des esp-sha-hmac
    mode tunnel
    crypto dynamic-map dynmap 1
    set transform-set AES128
    set isakmp-profile USERS
    crypto map COMPANY_VPN 10 ipsec-isakmp
    set peer *******
    set transform-set 3DES-MD5
    match address PA-VPN
    qos pre-classify
    crypto map COMPANY_VPN 50 ipsec-isakmp
    set peer ******
    set transform-set AES128
    match address VPN
    qos pre-classify
    crypto map COMPANY_VPN 999 ipsec-isakmp dynamic dynmap
    interface Embedded-Service-Engine0/0
    no ip address
    shutdown
    interface GigabitEthernet0/0
    ip address 37.222.111.224 255.255.255.248
    ip access-group INBOUND in
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip verify unicast reverse-path
    ip flow ingress
    ip flow egress
    ip nat outside
    ip inspect FIREWALL out
    ip virtual-reassembly in
    duplex auto
    speed auto
    no cdp enable
    no mop enabled
    crypto map COMPANY_VPN
    interface GigabitEthernet0/1
    no ip address
    ip flow ingress
    duplex auto
    speed auto
    interface GigabitEthernet0/1.17
    description LAN
    encapsulation dot1Q 17
    ip address 10.96.17.253 255.255.255.0
    ip access-group OUTBOUND in
    ip flow ingress
    ip flow egress
    ip nat inside
    ip virtual-reassembly in
    standby 0 ip 10.96.17.254
    standby 0 priority 110
    standby 0 preempt
    standby 0 track 1 decrement 20
    interface GigabitEthernet0/1.27
    description VOICE
    encapsulation dot1Q 27
    ip address 192.168.17.254 255.255.255.0
    ip access-group OUTBOUND in
    ip helper-address 10.96.17.2
    ip flow ingress
    ip nat inside
    ip virtual-reassembly in
    h323-gateway voip bind srcaddr 192.168.17.254
    ip local pool RAPOOL 10.96.20.50 10.96.20.150
    ip forward-protocol nd
    ip nat inside source route-map NAT-POOL interface GigabitEthernet0/0 overload
    ip route 0.0.0.0 0.0.0.0 37.222.111.223
    ip route 10.96.16.0 255.255.255.0 10.96.17.250
    ip route 172.22.1.0 255.255.255.0 10.96.17.250
    ip route 172.22.2.0 255.255.255.0 10.96.17.250
    ip route 172.22.3.0 255.255.255.0 10.96.17.250
    ip route 192.168.16.0 255.255.255.0 10.96.17.250
    ip access-list extended DMZ
    deny   ip any 10.0.0.0 0.255.255.255
    deny   ip any 192.168.0.0 0.0.255.255
    permit ip any any
    ip access-list extended GUEST
    deny   ip any 10.0.0.0 0.255.255.255
    deny   ip any 192.168.0.0 0.0.255.255
    permit ip any any
    ip access-list extended INBOUND
    deny   ip 80.25.124.0 0.0.0.255 any
    deny   ip 10.0.0.0 0.255.255.255 any
    deny   ip 172.16.0.0 0.15.255.255 any
    permit udp host 173.239.147.114 any eq isakmp
    permit esp host 173.239.147.114 any
    deny   ip 192.168.0.0 0.0.255.255 any
    permit udp any host 37.222.111.224 eq isakmp
    permit udp any host 37.222.111.224 eq non500-isakmp
    permit esp any host 37.222.111.224
    ip access-list extended NAT
    deny   ip 10.96.20.0 0.0.0.255 any
    deny   ip any 10.96.20.0 0.0.0.255
    permit ip 192.168.0.0 0.0.255.255 any
    permit ip 10.0.0.0 0.255.255.255 any
    ip access-list extended NONAT
    permit ip any 192.168.0.0 0.0.255.255
    permit ip any 10.0.0.0 0.255.255.255
    ip access-list extended OUTBOUND
    deny   udp any host 22.55.77.106 eq isakmp
    deny   udp any host 22.55.77.106 eq non500-isakmp
    deny   esp any host 22.55.77.106
    permit ip any any
    ip access-list extended PA-VPN
    permit ip 10.0.0.0 0.255.255.255 10.96.18.0 0.0.0.255
    permit ip 10.0.0.0 0.255.255.255 192.168.18.0 0.0.0.255
    permit ip 192.168.0.0 0.0.255.255 10.96.18.0 0.0.0.255
    permit ip 192.168.0.0 0.0.255.255 192.168.18.0 0.0.0.255
    ip access-list extended SPLIT
    permit ip 10.0.0.0 0.255.255.255 any
    permit ip 192.168.0.0 0.0.255.255 any
    ip access-list extended VPN
    permit ip 10.96.16.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 10.96.17.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 10.96.18.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 10.96.0.0 0.0.255.255 192.168.0.0 0.0.255.255
    permit ip 10.96.0.0 0.0.255.255 10.0.0.0 0.255.255.255
    permit ip 192.168.16.0 0.0.0.255 192.168.0.0 0.0.255.255
    permit ip 192.168.17.0 0.0.0.255 192.168.0.0 0.0.255.255
    permit ip 192.168.18.0 0.0.0.255 192.168.0.0 0.0.255.255
    permit ip 192.168.17.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 192.168.18.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 172.22.0.0 0.0.255.255 10.0.0.0 0.255.255.255
    permit ip 172.22.0.0 0.0.255.255 192.168.0.0 0.0.255.255
    route-map NAT-POOL deny 5
    match ip address NONAT
    route-map NAT-POOL permit 10
    match ip address NAT

    We have a VPN client configuration on a 2901 router. The client passes authentication and connects fine. When connected, cannot reach the 2901 or any devices directly behind it, BUT can reach routers and hosts that are connected to the same 2901 through site to site connections.
    Few notes:
    I have added some lines excluding NAT in a few different ways, but does not resolve.
    I have switched the RAP rool from 10.96.20.x to 172.21.20.x and can then connect to the local host. Appears to be a routing issue to the 10.x network, but I can't seem to find the solution.
    Any help would be greatly appreciated. Here is the config:
    boot-start-marker
    boot system flash
    boot system flash:c2900-universalk9-mz.SPA.153-2.T.bin
    no ip domain lookup
    ip inspect log drop-pkt
    ip inspect name FIREWALL tcp
    ip inspect name FIREWALL udp
    ip inspect name FIREWALL ftp
    ip inspect name FIREWALL fragment maximum 256 timeout 1
    ip inspect name FIREWALL ntp
    ip inspect name FIREWALL pptp
    ip inspect name FIREWALL dns
    ip inspect name FIREWALL l2tp
    ip inspect name FIREWALL pop3
    ip inspect name FIREWALL icmp router-traffic
    no ipv6 cef
    crypto isakmp policy 1
    encr aes
    authentication pre-share
    group 2
    crypto isakmp policy 5
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp policy 10
    encr 3des
    hash md5
    authentication pre-share
    group 2
    crypto isakmp policy 95
    authentication pre-share
    group 2
    crypto isakmp policy 99
    hash md5
    authentication pre-share
    group 2
    crypto isakmp policy 110
    hash md5
    authentication pre-share
    crypto isakmp client configuration group VPN-RAS
    key *********
    dns 10.96.17.2 10.1.200.50
    wins 10.96.17.2 10.1.200.50
    domain mine.com
    pool RAPOOL
    acl SPLIT
    save-password
    split-dns mind.com
    netmask 255.255.255.0
    crypto isakmp profile USERS
       match identity group VPN-RAS
       client authentication list DOMAIN
       isakmp authorization list VPN-RAS
       client configuration address respond
       keepalive 300 retry 5
    crypto ipsec transform-set AES128 esp-aes esp-sha-hmac
    mode tunnel
    crypto ipsec transform-set 3DES esp-3des esp-sha-hmac
    mode tunnel
    crypto ipsec transform-set DES esp-des esp-md5-hmac
    mode tunnel
    crypto ipsec transform-set 3DES-MD5 esp-3des esp-md5-hmac
    mode tunnel
    crypto ipsec transform-set DES-SHA esp-des esp-sha-hmac
    mode tunnel
    crypto ipsec transform-set myset esp-3des esp-sha-hmac
    mode tunnel
    crypto dynamic-map dynmap 1
    set transform-set AES128
    set isakmp-profile USERS
    crypto map COMPANY_VPN 10 ipsec-isakmp
    set peer *******
    set transform-set 3DES-MD5
    match address PA-VPN
    qos pre-classify
    crypto map COMPANY_VPN 50 ipsec-isakmp
    set peer ******
    set transform-set AES128
    match address VPN
    qos pre-classify
    crypto map COMPANY_VPN 999 ipsec-isakmp dynamic dynmap
    interface Embedded-Service-Engine0/0
    no ip address
    shutdown
    interface GigabitEthernet0/0
    ip address 37.222.111.224 255.255.255.248
    ip access-group INBOUND in
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip verify unicast reverse-path
    ip flow ingress
    ip flow egress
    ip nat outside
    ip inspect FIREWALL out
    ip virtual-reassembly in
    duplex auto
    speed auto
    no cdp enable
    no mop enabled
    crypto map COMPANY_VPN
    interface GigabitEthernet0/1
    no ip address
    ip flow ingress
    duplex auto
    speed auto
    interface GigabitEthernet0/1.17
    description LAN
    encapsulation dot1Q 17
    ip address 10.96.17.253 255.255.255.0
    ip access-group OUTBOUND in
    ip flow ingress
    ip flow egress
    ip nat inside
    ip virtual-reassembly in
    standby 0 ip 10.96.17.254
    standby 0 priority 110
    standby 0 preempt
    standby 0 track 1 decrement 20
    interface GigabitEthernet0/1.27
    description VOICE
    encapsulation dot1Q 27
    ip address 192.168.17.254 255.255.255.0
    ip access-group OUTBOUND in
    ip helper-address 10.96.17.2
    ip flow ingress
    ip nat inside
    ip virtual-reassembly in
    h323-gateway voip bind srcaddr 192.168.17.254
    ip local pool RAPOOL 10.96.20.50 10.96.20.150
    ip forward-protocol nd
    ip nat inside source route-map NAT-POOL interface GigabitEthernet0/0 overload
    ip route 0.0.0.0 0.0.0.0 37.222.111.223
    ip route 10.96.16.0 255.255.255.0 10.96.17.250
    ip route 172.22.1.0 255.255.255.0 10.96.17.250
    ip route 172.22.2.0 255.255.255.0 10.96.17.250
    ip route 172.22.3.0 255.255.255.0 10.96.17.250
    ip route 192.168.16.0 255.255.255.0 10.96.17.250
    ip access-list extended DMZ
    deny   ip any 10.0.0.0 0.255.255.255
    deny   ip any 192.168.0.0 0.0.255.255
    permit ip any any
    ip access-list extended GUEST
    deny   ip any 10.0.0.0 0.255.255.255
    deny   ip any 192.168.0.0 0.0.255.255
    permit ip any any
    ip access-list extended INBOUND
    deny   ip 80.25.124.0 0.0.0.255 any
    deny   ip 10.0.0.0 0.255.255.255 any
    deny   ip 172.16.0.0 0.15.255.255 any
    permit udp host 173.239.147.114 any eq isakmp
    permit esp host 173.239.147.114 any
    deny   ip 192.168.0.0 0.0.255.255 any
    permit udp any host 37.222.111.224 eq isakmp
    permit udp any host 37.222.111.224 eq non500-isakmp
    permit esp any host 37.222.111.224
    ip access-list extended NAT
    deny   ip 10.96.20.0 0.0.0.255 any
    deny   ip any 10.96.20.0 0.0.0.255
    permit ip 192.168.0.0 0.0.255.255 any
    permit ip 10.0.0.0 0.255.255.255 any
    ip access-list extended NONAT
    permit ip any 192.168.0.0 0.0.255.255
    permit ip any 10.0.0.0 0.255.255.255
    ip access-list extended OUTBOUND
    deny   udp any host 22.55.77.106 eq isakmp
    deny   udp any host 22.55.77.106 eq non500-isakmp
    deny   esp any host 22.55.77.106
    permit ip any any
    ip access-list extended PA-VPN
    permit ip 10.0.0.0 0.255.255.255 10.96.18.0 0.0.0.255
    permit ip 10.0.0.0 0.255.255.255 192.168.18.0 0.0.0.255
    permit ip 192.168.0.0 0.0.255.255 10.96.18.0 0.0.0.255
    permit ip 192.168.0.0 0.0.255.255 192.168.18.0 0.0.0.255
    ip access-list extended SPLIT
    permit ip 10.0.0.0 0.255.255.255 any
    permit ip 192.168.0.0 0.0.255.255 any
    ip access-list extended VPN
    permit ip 10.96.16.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 10.96.17.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 10.96.18.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 10.96.0.0 0.0.255.255 192.168.0.0 0.0.255.255
    permit ip 10.96.0.0 0.0.255.255 10.0.0.0 0.255.255.255
    permit ip 192.168.16.0 0.0.0.255 192.168.0.0 0.0.255.255
    permit ip 192.168.17.0 0.0.0.255 192.168.0.0 0.0.255.255
    permit ip 192.168.18.0 0.0.0.255 192.168.0.0 0.0.255.255
    permit ip 192.168.17.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 192.168.18.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 172.22.0.0 0.0.255.255 10.0.0.0 0.255.255.255
    permit ip 172.22.0.0 0.0.255.255 192.168.0.0 0.0.255.255
    route-map NAT-POOL deny 5
    match ip address NONAT
    route-map NAT-POOL permit 10
    match ip address NAT

  • How can I choose the target image in Magic Move?

    Hello,
    I'm trying to use Magic Move to transition between slides. There are multiple shapes that are the same size and color on the target slide. Is there a way to control what the "target" shape is in Keynote?
    Here's what I mean (please pardon my corniness):
    Could I make it so that this image "shrinks" into the box on the far right ("Already")?
    Right now, it's defaulting to the third box from the left each time.
    Thank you so much for any help!

    Hello HanktheCat,
    Thank you for providing the details of what you are trying to do with Magic Move in Keynote.  I found a couple of resources that I think might help. 
    To use Magic Move, you set a target location by moving the original object to a new location or changing the size on the following slide.  I found an article with some tips on how to set this up:
    The Magic Move transition uses graphics and text that appear both on the current slide and the following slide. During the transition, the objects are moved into their new position and size on the following slide. This transition only works when you use an identical image, shape, or text box in a different location or with a different size on the next slide. Magic Move doesn’t work with tables, charts, or movies.
    For best results with a Magic Move transition, duplicate the slide and apply the Magic Move transition between the original and the duplicate.
    To set up a Magic Move transition:
    Create a slide and place the objects (text, shapes, images) where you want them.
    Select the slide in the Slide Navigator and press Command-D to duplicate the slide.
    On the copy of the slide, reposition and resize some or all of the text, shapes, and images on the slide.
    Add any additional text or graphics you want to add to the copied slide, and delete any objects you don’t want on it.
    Select the first slide of the pair and apply the Magic Move transition. For detailed instructions on how to add a transition between slides, see Adding Transitions Between Slides.
    You can find the full article here:
    Keynote '09: Tips for Creating a Magic Move Transition
    http://support.apple.com/kb/PH6129
    You can also watch a video of implementing Magic Move in this article:
    Keynote '09: Animate Objects Between Slides with Magic Move
    http://support.apple.com/kb/VI119
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Can I change the target of a Pagination Select List?

    Hi,
    Basically what I want to know is this. In a report with pagination using a select list, is it possible to modify the target of where it will redirect?
    Because again, with the 0 session, if i currently using the 0 session, the select list will submit the page and put the real session ID in the address bar. So I lose the 0 session. But for the next and previous links, I can work around it by using PPR reports though.

    I'm bumping this, because I very interested in knowing if what I'm asking is possible.

  • From an ItemRenderer, how can i reach the component that the Itemrenderer is applied on

    Hello.
    I have a component that uses a skin that uses several different item renderers.
    in each item renderer i want to set a different background color according to a public variable that
    the component that i apply the item render on has.
    how can i reach that component from the ItemRenderer?
    thanks!

    Usually outerDocument or parentDocument.

  • Sending mail to a bunch of recipients, got a message failure, but can't reach the connection doctor. It's too far down

    I was using Mail to send a message to about 200 recipients.
    Got a message
    "Cannot send message. Did not recognize the following
       recipients:
       xxxxxxx
       xxxxxxx"
    200 addresses down
    Cannot reach the Connection doctor button.
    It's too far down.
    How can I erase it?
    I still use Mail, but the message failure is still there.

    Try this settings on your Router, This will solve your problem.
    Open the set up page of the router by launching an Internet Explorer Browser and type the address bar, 192.168.1.1 and press enter. When it prompts for the username and password, leave the username field
    empty and provide password as admin and click on ok.
    On the main setup page the ""Internet Connection Type"" should be
    on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
    button.
    Now click on the sub tab ""MAC address clone"".
    - Click on enable
    Click Clone & click save settings
    Check WAN Ip on Status page of router ....
    If getting Valid Ip .... try going online
    If not ... power cycle for 4-5 minutes & then again check the WAN Ip address ..... 

Maybe you are looking for

  • Why is my Ipod Touch 4g not registering in iTunes?

    I just bought an iPod Touch 4g on Ebay.  I've tried all the troubleshooting in the instructions, downloaded the latest iTunes, the USB cable is plugged in and it keeps saying I have no internet connection.  I don't have a router or wifi at home, so I

  • Siebel BIP Integration Objec for Parent, Child and Grand Child

    Hi, I 'm trying to create a one report for displaying Parent, Child and Grand Child. Service Request - Quote - Quote Item. Successfully create the BIP Integration object and generated the xml file. problem here is when trying to include the fields in

  • Select statement error.

    Hi all, I have a select statement which will join 4 tables as shown below. Something is not working right in the select statement and caused the shortdump. I really cannot figure out where is not right. Please help. TYPES:     BEGIN OF t_lips,     ma

  • Can't drag app to other page on iTunes 12

    I tried to drag the app to other page but I can't,  though It works before a week. iTunes version is 12.1.0.50 and I'm using to backup to the iCloud backup and Yosemite. Plz help me.

  • Certification for WM

    Hi I know this question has been posted before, but I didnt find the answer I was looking for. I am interested in WM certification. Is the SAP WM certification called : SAP Consultant Certification Solution Consultant SCM u2013 WM & LE with mySAP ERP