Can't receive messages from just one group. Can receive messages from each of the individuals in the group separately
I am not receiving messages from one particular group of people on my phone. I am receiving other group messages and can receive messages from each person in the group individually. iPhone 5c.
I am right there with you. This describes my problem to a T. Only other issue I am having is group texts. Iphone users who include me in a group text still send as imessages as well, so even if I text them first and they reply, it send as an imessage. Get it together apple.
Similar Messages
-
I can send, but I can't receive texts messages from just one person
I can send, but I can't receive texts messages from just one person.....thanks
Hello railenemarie16, let's solve this mystery together! Have you tried deleting your contact from her device and then re-adding? Also, have her send you a message manually instead of from the saved contact. Did you have an iPhone previously before the Note 3 and used iMessage? Keep us posted!
WiltonA_VZW
VZW Support
Follow us on twitter @VZW Support -
No received text messages from just one friend on Verizon
Hi - I can't receive texts from just one person. It started a few months ago but I can't pinpoint any Android upgrade that would have caused this. My friend is on Verizon and she receives my individual texts, group texts, MMS messages, etc. but when she responds to me individually or as a group I do not receive them. I have a Galaxy S4 running 5.0 Kit Kat and it is not rooted. My friend has Galaxy S6 with same Android version except 5.1.1 and she has not had any upgrades. I have searched many forums and can't find any solution so what can I do? I pulled my SIM out of my phone and put it into another old one and it works fine. I have done a reset, removed and installed contacts, etc. and nothing. Ideas?
Hello
I’m sorry to hear that you are having issues with receiving text messages from your friend who uses Verizon; I would be happy to assist you!
There is one thing I would urge you and your friend to check from each device: Spam List.
Have either of you incidentally labeled the other as a ‘Spam Sender’?
If both devices are checked, and neither of you are added on the spam list, please send me a PM by clicking here. I will need the following:
First and Last name
Email address
Wireless number
Thank you,
Charise -
How to send a message to just one person when it keeps sending to previous group?
I want to be able to send a text message to just one person at a time.
My iPhone 4s keeps sending messages to all the people that have been grouped with the intended recipient, no matter if I put ONLY that recipients name in the box.
I have:
- cleared out the list of previous messages (even tho I hated to do so).
- turned off group messaging.
- shut down my phone, waited 30 min and restarted it.
None of that worked,
Please help!Have you tried going to your contact list - said contact - send message?
-
How do I create a pdf from just one or two pages of an existing pdf?
I just purchased this product (acrobat online)
and it is not allowing me to do the things it promised, e.g. saving portions of one pdf to another, combining pages or entire docuements to create, even typing into a document (editing)! I am so frustrated - can someone please help!?But I jut paid $89.00 for the adobe pack - if I subscribe to Acrobat Plus, will that be credited?
Date: Thu, 19 Sep 2013 15:50:14 -0700
From: [email protected]
To: [email protected]
Subject: Files.Acrobat.com How do I create a pdf from just one or two pages of an existing pdf?
Re: How do I create a pdf from just one or two pages of an existing pdf?
created by H.Spector in Files.Acrobat.com - View the full discussion
Hi,
Thank you for your subscription. If you are Acrobat Plus subscriber then you can extract the pages from the PDF file using Tools> Pages> Extract pages.
You can find "Tools" at right top once you open your PDF file in Acroat.
If you are subscriber to PDF Pack then please download Acrobat XI Plus from www.adobe.com.
PDF Pack service offers "Convert to PDF", "Export from PDF"(to Word/PowerPoint/Excel/RTF formats so that you can edit the exported files) and "Combine Files" (combine your files into a single PDF file).
Please let me know if you have any quesitons.
thank you.
hisami
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5697921#5697921
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5697921#5697921
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5697921#5697921. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Files.Acrobat.com by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
In Mail, is it possible to extract email addresses of senders from just one account inbox?
Click on the arrow next to the number of emails in the conversation. That'll show you each separate email. You can create a new mailbox (call it what you want) and drag that email out of the conversation into that mailbox.
-
I have music files by the same artist but they are listed in Itunes in more than one album hod can i add then to just one album of that artist I am using windows 8.1 .
iTunes will group songs into an album when:
All songs have the same value for the Album and Artist field, or
All songs have the same value for the Album and Album Artist field
All songs have the same value for the Albumfield and the Part of a Compilation flag is checked.
If you want to group all the songs by one artist into a single "album" you can do so by following one of these rules. However, it may be more useful to create Playlists to group music like this and retain the original release information. One Smart Playlist for each artist you're interested in would meet this need without over-writing information about the source albums. -
I have two apple id's in email format--how can i change this to just one and merge all of my apps and tunes under the one retained ID?
Sorry Duane..
Apple does not support the merging of accounts > Frequently Asked Questions About Apple ID
messaged edited by cs -
Now that I am on iCloud I haveTWO of each of my contacts. How can I get back to just ONE of each contact?
auntiqu wrote:
Now that I am on iCloud I haveTWO of each of my contacts. How can I get back to just ONE of each contact?
Remove the contacts from 'On My Mac' you don't have duplicates, you are looking at 2 accounts at once. -
I have a one-column table in pages. Each cell has text and a number separated by a colon. Can I automatically make it two column with everything to the right of the colon in the second column?
Here's another way that is pretty quick to do.
Formula in Column B is:
=LEFT(A, FIND(":", A))
Formula in Column C is:
=RIGHT(A, LEN(A)-FIND(":", A))
You can eliminate the colon from the result in column B by writing:
=LEFT(A, FIND(":", A)-1)
Once you do the conversion, you should freeze the result by Selecting columns B and C and then Command-C, Edit > Paste Values.
Regards,
Jerry -
Can I restrict itunes to just one user account in windows 7
Hi there,
I have just bought an iPhone and was wondering if it possible to set up two user accounts on my PC that are entirely separate from one another (OS Windows 7). The reason being is that I want to be able to use my iphone with iTunes on one account/partition, but I don't want iTunes to be at all evident on, or have any influence over, the other account: I use both an iPhone and a Creative MP3 player, so want to to keep my MP3s and WMAs synched with Windows Media Player, but I still want to be able to download apps, films and upload photos using my iphone through iTunes.
To illustrate, if I set up two user accounts on my computer - FRED and JANE for example - and install iTunes on FRED's profile only, will it also appear on JANE's profile? If so, is there anyway round this? If I can't achieve this through user accounts, can I do this by partitioning my hard drive into two and then setting up some kind of dual-boot process?
Many thanks in advance for any advice, I am perplexed by all of this!!
BarneySG
Just an update to the question that I presented when I started this thread.
You really never did say what type of a User Account you are using in your Premiere Elements 8.0/8.0.1 on Windows 7? But based on the information provided by several users, User Account with Administrative Rights seems to be the way to go since all of them were using it and had systems that were running well. I would have expected that based on the Premiere Elements Windows XP requirements. I have yet to have someone come forward to say that they are using Premiere Elements 8.0/8.0.1 on Windows 7 with a User Account with Standard Rights and the program is running well. Will you be that one?
Besides me switching from Windows XP to Windows 7 in the near future, what motivated this line of questioning was the report that I had seen of a user with Premiere Elements 8.0/8.0.1on Windows 7 who was reporting "permission" error messages when trying to archive a project with the Project Archiver (Archiver "Trimmed" and Copy options). Further questioning brought out that the problem extended to the AutoSave feature as well. The user claimed to be saving to an external hard drive (formatted NTFS) with about 800 MB free space. And still further questioning brought out that the error message included a free space and/or permissions error. Yes, there were extremely large file sizes involved here (way over 4 GB)
The story had a happy ending where the remedies were:
1. User Account with Administrative Rights
and the major
2. Formatting the thought to be NTFS external hard drive from FAT32 to NTFS.
ATR -
I have multiple email accounts on TB. however, whenever I send an email from any of the other accounts, when the email arrives it shows as having been sent from the email account I first set up on TB. even if i am replying to an email received, the reply shows from the original account instead of the one I actually send it from. I REALLY need to fix this fast!!
You have to set the return address to a different one from the first one (since that will usually be the default) if that is what you want. You can set the identity information from Account Settings > [account name] > Manage Identities button.
-
Features to isolate OSB services from just one slow business service.
Hi,
Here is a OSB question around a quick business service that suddenly turn to be a slow one and the impact on the overall OSB performance.
Suppose you have a critical OSB cluster in production with many proxy and business services.
Because of requirements, you have a specific sync http business service (web service) that has an acceptable response time around 1 secs. But suddenly the response time goes to 30 secs or even more due to some problem, generating a great impact on thread and resource consumption on OSB side.
Suppose a http time out configuration of 2 secs on the business service is just not enough. OSB continues to crash.
You can use OSB throttling feature but doing that you have to fix a maximum concurrency.
If the service implementation is down, OSB can handle that using "Offline Endpoint URIs" in the operational settings of sbconsole. But in this situation the service is online accepting requests. It's just slow to respond.
This is a hypothetical situation just to stress the problem.
Besides business service time-out configuration and throttling and dispatch-policies on proxy/business services are there any other features that can be used ?Wesley,
Ok, once the business service request is sent, the thread is freed. When the response comes, a new thread is picked up to handle the business service response. So in the mean time there's no blocking thread. Yes. It is correct.
Just to make sure, what about the waiting synchronous http client calling the proxy service ?
I mean, this fire-and-forget feature works only on the business service side or entirely for the proxy/business service (That separation would not make sense I suppose) ? The same case with http proxy. The request thread will be used till the BS is invoked in the route node or end-of the request pipeline. After this thread is released. Once the response comes from the http bs on a different thread, that thread will be used till the end of the responsepipeline
eg
Client---->Http Proxy---->Thread1{Request Pipeline--->Routenode---->End of Request actions in the Routenode--->Call BS Request} ----->Thread2{BS gets response--->Response Pipeline --->send response back to the client}
For example, a http client is waiting for the proxy service response, but while the business service does not respond, there is no blocking thread at all in the proxy service side too ?Yes. That is true
So, there could be many waiting http clients calling this proxy service, all http business service requests sent, and no blocking threads ?Yes.
What would be the drawbacks of this feature ?Nothing I can think off. Therotically we will be forced to do extra over head when BS latencies are low which might of little practical impact. In that case you can change QOS=Exactly once. BS request and response will be on the same thread , but proxy response thread will be always different from that of proxy request thread no matter what the QOS is set
Cheers
Manoj -
Can I record everything in just one slide?
Hello,
I’m trying to create an 30-second flash animation of
our software, with some textual callouts. Since I’ve got the
Adobe Technical Communication Suite, I figured I’d use
Captivate for the job, but I’m new to it and can’t get
my head around some things. If someone has the time to point me in
the right direction, I’d appreciate it. I have tried checking
the help and rummaging through forums, but still can’t get it
to work the way I want.
I’m using the “Full Motion Recording” mode,
since our software is pretty interactive in real-time and I want to
show that. All I want is to do is record about 30 seconds of me
using our software, and afterwards add text callouts here and
there, before exporting to an .swf file.
Question 1: Captivate automatically chops up my recording
into several “slides”, is there a way to make it put
everything in just one slide? Or set the default time of a slide in
order to get my entire recording in one single slide? The problem
is, if I want to place a callout just between two slides…
well, I can’t do that right? I just want one and the same
timeline for my entire recording.
Question 2: After the recording is done, is there a way to
adjust the speed, or pause, certain segments of the recording? For
example, if I realize that the viewer of my flash video needs a
couple of seconds longer to read a certain callout, I want to
“pause” or “extend” that point in the
timeline for a bit. Can I do that, or do I need to record the
entire thing from the beginning and actually pause myself at the
appropriate time?
I’d be thankful for all advice and suggestions. I
realize I’m new to this, so any nudges in the right direction
would be appreciated!
/TomHey there Tom
From my experience, the only time I need full motion is
during a drag & drop or scrolling type of action when the view
"moves" like a film.
My suggestion is that you plan what you want to do (click
here, then there, then select that button etc.)
Step 2 is to start a new project and select "Demonstration"
as the recording type, spec the size of the recording window if
needed and start recording (You might want to use auto capture
which would automatically record all interactions and key strokes,
but please remember to "manually" capture certain screens using
Print Screen e.g. after a drop down menu has opened.) (Hint 2 -
Rather record too many screens than miss one critical one out)
Step 3 would be to stop recording and edit the individual
slides with captions, animations etc. At this stage, you can
specify exactly how long each screen would display, when your
captions etc appear and for how long they show.
In summary, a decently built demo has a seperate slide for
each change in what the user would see on the screen, with FMR
being used to "tie together" 2 views where a movement action causes
the transition.
Hope this helps
Andrew -
I put office for MAC on my macbook air--it somehow shows up twice and documents load out there depending on which one you pick. I need to get all of the office installiations off and reinstall but it appears to leave one out there. When I go to applications I cannot see it but I can see it on the icon line on the bottom of the screen. How can I reinstall Office for Mac so there is only one installation on my computer ?
Unfortunately the information given to you by r8er is incorrect, deleting the Office folder from Applications only partially uninstalls Office.
Here are the correct uninstallation instructions for you.
And the icons at the bottom are just shortcuts. -
Remove UWL Action from just one item type
I would like to remove the "forward" action from only one item type in the UWL. There is the ability to remove an action from all items in a particular iView using "List of UWL Actions to exclude", however, I can not find out how, or if it is possible to exclude a UWL action in the XML configuration file for just one item type. We are on NWO4s sp 05. Does anyone know if this can be done and what the xml snippet would look like that would remove the "forward" action from a single item type?
Regards,
Stephanie.Kiran,
The xml snippet you sent does remove the "forward" action from the UWL preview iView, but it does not remove the action from the list view. To the right of every item in the list view is the "properties" icon (unclear on the actual name of this icon - the one that has 3 small lines and a triangle). When this is clicked the "forward" option still appears. I am looking for a way to totally disable the forward option on the defaultView, but only for certain item types.
Regards,
Stephanie.
Maybe you are looking for
-
Can I transfer money to other accounts on my iPad with iOS 5.1.1? I created another account and put an iTunes gift card on it, but then I realized that all of my apps ere on another account, so when I recovered the password of my previous account, I
-
A function to give number in numeric to number in English
Dear Oracle experts I just wondering is there any in-built SQL or PL/SQL function which enable me to covert a numeric number like '1' to 'one', '14' to 'Fourteen', '13 to 'thirteen', '113,200.00' to 'one hundred and thirteen thousand two hundred'. ..
-
How to specify a constant value in external tables??
Create table cp_portfolio_ext rec_type varchar2(1), acct_nbr varchar2(23), acct_title varchar2(50), prod_type_c
-
Urgent help: inputstream
Hi, I m defining a BufferedReader and a Inputstream. for example: in = new BufferedReader(new InputStreamReader(socket.getInputStream())); inStream = socket.getInputStream(); The BufferedReader is use for reading Strings but i als
-
Hi I´m creating a data-list to user select an value, how can I create an operation name called select in .xml and how after the users select the input I get the id of that input in database to insert in other table ? Thanks.