Can't Restore iPod. Running Out of Ideas!

Okay, so i now know the flashing orange and green lights mean I have some sort of error.
but when i try to restore the iPod, it says there is and "iPod Service Error". What do i DO PEOPLE!?!??!?! Buy a new one and pitch this thing out a window.
Gateway EV910    

"when i try to restore the iPod, it says there is and "iPod Service Error". What do i DO PEOPLE!?!??!?! Buy a new one and pitch this thing out a window."
That would certainly be one response. You might also consider running through this, though:
iPod Service Error
Good luck
srb

Similar Messages

  • My iPad Air is disabled after wrongpassword attempts.I didn't sync it with my laptop also. How can I restore it with out losing the data.

    My iPad Air is disabled after wrongpassword attempts.I didn't sync it with my laptop also. How can I restore it with out losing the data.

    You can't unlock it without losing data. It's too late for that now. You totally erase the iPad when you unlock it and you will have to start all over again. Most of your purchased content can be downloaded again.
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Download past purchases - Apple Support

  • Does my music get lost if my iPod runs out of battery?

    I've never got my iPod running out of battery, so I'm wondering if my music could get lost when the iPod runs out of battery?

    Welcome to Apple Discussions.
    No, the iPod will keep the songs even if it runs out of battery power. Just charge it up again and you can play its songs.

  • Why is my iPod running out of disk space

    why is my iPod running out of disk space because i used to have 796 photos on my ipod and i deleted them and now i have 36 and when i try to update apps it says "warning you are running out of disk space please delete some photos and videos" PLEASE HELP ME!

    connect your device to itunes and click on your device
    thn go to the summary tab( by default u will be in the summary tab..
    then at the bottom it'll show u what items and taking the space.. and u can delete accordingly

  • HT201252 can not restore ipod it is in disabled gets to the the middle of restore and some cod 9006 come up -

    can not restore iPOD it is in disabled ,some cod 9006
    need help

    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.

  • Can not restore ipod touch. About 167MB of 346,8MB get loaded than download stops, a few minutes later:  ERROR 3259

    Can not restore ipod touch. About 167MB of 346,8MB get loaded than download stops, a few minutes later:  ERROR 3259! ( High Speed Internet Connection 16000kBits/sec)

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • Trying to install visual studio on my mac and it is freezing during the install and I have to reboot, I have run out of ideas as to why it will not install. amy help with this would be greatly appreciated

    Trying to install visual studio on my mac and it is freezing during the install and I have to reboot, I have run out of ideas as to why it will not install. amy help with this would be greatly appreciated

    maybe something is wrong with your install or your computers hardware as in a periodic defect
    or the cd is dodgy
    installed
    vs express 2013 for desktop
    vs express 2013 for windows (metro)
    vs express for windows phone
    on my windows 8.1 think I installed them when I was still using win8 though
    without problems
    when the same bootcamp partition was windows 7 ultimate 64bit
    I was running
    vs 2010 pro
    and vs 2008 (for winCE)
    without problems

  • Can not restore iPod, iTunes Network Connection Timed Out

    Cannotrestore iPod, iTunes Network Connection Timed Out. I have updated my iTunesversion, but still can’t perform iPod restore. I turned off my firewall, tried numeroustimes for the past 3 days

    Did you also disable your antivirus?  Some users reported that they had to configure their security software to no automatically startup on boot up and then reboot their computer.  Just turning off/disabling without rebooting did not work.

  • Can't Restore iPod 3G

    After transferring some songs to the iPod I noticed that it was making a clicking sound as if the drive was spinning up and trying to engage but not able to (clicking) then spinning back up again and clicking and repeating indefinitely. I could not restore via iTunes. Got a message saying:
    "iPod could not be restored. Unknow error (1429)."
    Even the Disk Utility could not recognize the drive.
    Any ideas?

    From all the experience I received from this forum, I believe that the Apple's geniuses would not do anything other than to Restore the iPod back to the factory setting. If they can't get the iPod mounted with their computer, then they will describe it as a hard drive problem.
    The iPod with folder with exclamation icon = the iPod OS get corrupted and not able to boot up the iPod
    The Sad iPod icon = some problem with the hard drive, likely the head of the hard drive get stuck at the certain point or some bad sectors on the HD. It can be solved as the ordinary HD, the key is to get the iPod mounted and allow you to do the format (not Restore).
    For further info, you can have a read the following, and click the links below, which would give you more understanding
    Hello,
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Can't restore ipod -48 error message

    trying to restore ipod from mar to window XP and get a message.It said,There was a problem downloading the Ipod software for ipod "ipod". An unknown error occurred(-48) Make sure your network settings are correct and your network connection is active, or try again later. We have tryed to restore is several times and get the same message every time.

    I FOUND OUT HOW TO FIX IT:
    1) You need to make sure you back up your library so you can maintain your ID3 tags, ratings, and library settings. So follow the instructions located at: http://www.kadavy.net/blog/archive/2005/08/transferyouri.php
    2) Uninstall iTunes completely
    - After uninstalling, make sure that the following directories are erased:
    C:\Documents and Settings\All Users\Application Data\Apple
    C:\Documents and Settings\All Users\Application Data\Apple Computer
    C:\Documents and Settings\All Users\Documents\My Music\iTunes
    C:\Documents and Settings\YOURUSERNAME\Application Data\Apple
    C:\Documents and Settings\YOURUSERNAME\Application Data\Apple Computer
    C:\Documents and Settings\YOURUSERNAME\My Documents\My Music\iTunes
    C:\Program Files\iTunes
    - this will ensure that all the previously installed versions of iPod firmware updates are erased.
    3) One other thing that I did, which I don't know if it helped. Was cleared my registry from previous iTunes installations, by
    a. clicking start....run
    b. typing 'regedit'
    c. searching for strings that had "iTunes" in them and removing the ones under the folder "SOFTWARE" and NOT ANY OTHERS.
    ~be advised that the registry is very crucial to Windows interface and I am not liable for any damage done due to ignorance or neglect during this step
    4) Empty Recycling Bin to get rid of everything
    5) Re-install the latest versions of iTunes available at www.apple.com
    6) Click File-->Import and then selecting your exported Library File (XML)
    this will re-import all your settings and album ratings and ID3 tags
    7) THEN VAIOLA! This fixed my error -48

  • Can't restore iPod after seeing the "Exclamation point folder icon"

    My iPod showed me the "Exclamation point folder icon" out of the blue... i tried resetting, restoring (upgraded to 7.1 in the process) but when i connect the ipod to my computer it still shows me the icon, then the Apple sign, then "Do not disconnect" (while charging) and then the ipod itself starts clicking...
    any help would be GREATLY appreciated!! very furstrated over here...

    Hello,
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Can't Restore Ipod...error message

    I presume I need to restore my 5th gen Ipod as I can't sync it with itunes. However I also can't restore it.
    I get a 1418 error message, also had a -50 error message too.
    It has worked once since i got it, i synced it with a mates computer. But I can't get it to sync with my new comp at all.
    This is very frustrating as i've not been albe to use it at all. Its just a pretty external hard drive at the mo!
    I take it formatting it with windows would be a very bad idea?

    I HAVE A 20G IPOD THAT IS 1YEAR AND 10 MONTHS OLD. IT WILL NOT RESTORE ANYLONGER AND SHOWS THE SAD IPOD ICON. I WANTED TO SEND IT IN FOR REPAIRS BUT BECAUSE IT IS PAST THE 1 YEAR WARRANTY ALL IPOD WILL DO FOR ME IS SELL ME A REFURBISHED IPOD FOR $271.94. IPOD SHOULD RECALL THE IPODS THAT ARE FREEZING AND SKIPPING SONGS THAT ARE NO LONGER ABLE TO BE RESTORED. I CANNOT FIND ANYONE TO REPAIR MY IPOD OTHER THAN APPLE JUST WANTING ME TO BUY A REFURBISHED ONE THAT COSTS ABOUT $30 LESS THAN THE BRAND NEW ONE I BOUGHT 1YEAR AND 10 MONTHS AGO. I AM VERY DISSAPPOINTED WITH APPLE IPOD AND I WILL NOT BUY THEIR PRODUCTS AGAIN.

  • Can't restore iPod in Windows XP

    Hey everybody,
    I just had my iPod replaced and now have a newly restored monochrome iPod c/w in front of me. It came with instructions stating that it had been formatted for Mac, and that I would need to use the updater to get it ready for my PC.
    So, despite all the crap I have heard about iTunes 5.0 I downloaded it along with the latest updater. Both installs went fine.
    According to the instructions included I was to install the updater, run it, plug in my iPod, then click RESTORE when the software detected the iPod and bolded the RESTORE button.
    All this happens just as the instructions say but after I click RESTORE a message appears saying, "Can't lock iPod. Please check if any other applications are using iPod and try again."
    Obviously I am not so stupid as to run iTunes when I do this and I don't know what else could be using my iPod...any one know how to get around this?
    P.S. The iPod is currently mounted as a removable USB mass storage device in Windows. Could this be part of the problem (is MicroCrap Windows XP Pro using my iPod in the background)?

    Not that it matters but after a couple of reboots/unplug-replug sessions I got passed that error and now it just says "Firmware update failure. Disk write error." which seems to be what everyone else is getting with the latest software from Apple...***?!?!?

  • Problems Running out of IDE (Netbeans) LDAP SSL

    I am kind of new to Java and I have a problem with a code that is using a TrustStore. Basically if I run the code within Netbeans everything work but if I do the "Clean and Build" and execute the JAR file when I check my logger out when running out of the IDE I am getting the following exception.
    Mar 06, 2015 9:40:58 AM ad_pass_reset.AD_Pass_reset INFO: Bind error: javax.naming.CommunicationException: WIN-A321J1VGM4K:636 [Root exception is java.lang.ExceptionInInitializerError]
    Which is caused by this part
    public AD_Pass_reset() {   
                Logger logger = Logger.getLogger("MyLog"); 
                try {
                    Hashtable ldapEnv = new Hashtable();
                    ldapEnv.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
                    ldapEnv.put(Context.PROVIDER_URL, "ldap://" + serverIP + ":636");
                    ldapEnv.put(Context.SECURITY_AUTHENTICATION, "simple");
                    ldapEnv.put(Context.SECURITY_PRINCIPAL, DAUser);
                    ldapEnv.put(Context.SECURITY_CREDENTIALS, DAPass);
                    ldapEnv.put(Context.SECURITY_PROTOCOL, "ssl");
                    ldapContext = new InitialDirContext(ldapEnv);
                catch (Exception e) {
                    logger.info("Bind error: " + e);
                    System.exit(-1);
    And from what I have found the Bind error could be caused because the code is not able to use the Certificate, here is how I call the truststore
         String keystore = "C:\\Program Files\\Java\\jre7\\lib\\security\\securitycacerts";
         System.setProperty("javax.net.ssl.trustStore",keystore);
         System.setProperty("javax.net.ssl.keyStorePassword", "12345!");
         System.setProperty("javax.net.debug", "all");
    I know that my LDAP is works with the SSL because I can connect using the LDP.exe and in fact if I run my application using netbeans everything works.
    Does anybody know how to get around this?
    Thank you

    I am kind of new to Java and I have a problem with a code that is using a TrustStore. Basically if I run the code within Netbeans everything work but if I do the "Clean and Build" and execute the JAR file when I check my logger out when running out of the IDE I am getting the following exception.
    Mar 06, 2015 9:40:58 AM ad_pass_reset.AD_Pass_reset INFO: Bind error: javax.naming.CommunicationException: WIN-A321J1VGM4K:636 [Root exception is java.lang.ExceptionInInitializerError]
    Which is caused by this part
    public AD_Pass_reset() {   
                Logger logger = Logger.getLogger("MyLog"); 
                try {
                    Hashtable ldapEnv = new Hashtable();
                    ldapEnv.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
                    ldapEnv.put(Context.PROVIDER_URL, "ldap://" + serverIP + ":636");
                    ldapEnv.put(Context.SECURITY_AUTHENTICATION, "simple");
                    ldapEnv.put(Context.SECURITY_PRINCIPAL, DAUser);
                    ldapEnv.put(Context.SECURITY_CREDENTIALS, DAPass);
                    ldapEnv.put(Context.SECURITY_PROTOCOL, "ssl");
                    ldapContext = new InitialDirContext(ldapEnv);
                catch (Exception e) {
                    logger.info("Bind error: " + e);
                    System.exit(-1);
    And from what I have found the Bind error could be caused because the code is not able to use the Certificate, here is how I call the truststore
         String keystore = "C:\\Program Files\\Java\\jre7\\lib\\security\\securitycacerts";
         System.setProperty("javax.net.ssl.trustStore",keystore);
         System.setProperty("javax.net.ssl.keyStorePassword", "12345!");
         System.setProperty("javax.net.debug", "all");
    I know that my LDAP is works with the SSL because I can connect using the LDP.exe and in fact if I run my application using netbeans everything works.
    Does anybody know how to get around this?
    Thank you

  • Forgot passcode; Can't restore iPod?

    I locked myself out of my iPod, and since this has happened before I just decided to restore it as I usually do. However, iTunes is telling me that I can't restore my iPod until I turn off Find My iPod in the iPod's settings. I can't exactly do that, considering I'm locked out of it. Is there any way to turn it off, or just restore it anyway?
    iOS 7 beta 6 on an iPod 5th gen, if that helps at all.

    You say you have iOS 7. If you are a developer you have access to the private OS 7 developer's forum
    iOS 7 Developer forum- Apple Developer
    Otherwise you are on your own
      PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog
    You ran into one of anti-theft features in iOS 7

  • How can i restore IPoD if my brother locked it for 23,000 minutes? and I have no backups

    Help me please!

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

Maybe you are looking for

  • IPod touch no longer opens iTunes -- option is greyed out in device Summary

    I've been using my 1st gen iPod touch with iTunes for two years with no problems. Recently when I plug the iPod into my computer, nothing happens (besides charging). If I manually open iTunes, the iPod does appear as a device, and I can click Sync to

  • Part -1 Not Capturing at the time of GR

    Hi Friends, I am biffurcation 100 kg of qty in to two batches at the time of GR system is updating part-1 only for one batch whereas there is no part 1 entry for second batch. Need your help why this is happening Regards Vivek

  • When is the update of pages 5.1. coming?

    I urgently need numbering my "paragraph styles" & my document. After that I would like to add a table of content in the beginning. Apparently it doesn't work. I wished sth. like that: 1. APPLE 1.1 iPhone 1.2 iMAC 1.2.1. MacBook Pro 1.2.2. MacBook Air

  • How to create windows executable file from a java file. Please help.

    Hi, For my project I developed the codes in Java. It is working well with java run time environment. But without that I can not run it. I need to create a exe file (windows executable file) from the java source code. If you have any idea please share

  • Nokia 6300 Battery Discharges too early very fast

    I have bought a Nokia 6300 from Karachi Pakistan. The battery discharges very faster than the normal battery discharge time under normal temperature n conditions. Need solutions as soon as possbile. EDIT: removed personal informationMessage Edited by