Can't scan to 1 Mac in the office with HP OfficeJet Pro X576dw MFP

Hi, We recently moved offices, and after getting to the new location all computers have been able to connect to the Network printer in the office for printing and scanning.  We have both PC and Macs in the office and all are working fine. One of the Mac computers is able to print, but none of the scan options are available. Running Mac OS 10.10.4, have run all the Mac updates and have deleted and reinstalled the printer software.  Any help is appreciated.

Try updating the software by following these steps:
First ensure the printer is powered on and connected to your Mac or to the same network.
Click the Apple icon, then select About This Mac.
Click on Software Update, then click the top Store menu of the shown window and click on Reload Page.
Be sure to install any HP or Apple update, then check for any difference.
If the same persists, manually try installing the package below:
http://support.apple.com/kb/dl907 Finally, if you are still not able to scan try the HP Easy Scan app and check if that may allow scanning:https://itunes.apple.com/us/app/hp-easy-scan/id967004861?mt=12 Regards,Shlomi

Similar Messages

  • HP Officejet Pro X576dw MFP scan to network folder

    HP Officejet Pro X576dw MFP Scan to Network Folder function is producing error messages in the Network Folder Setup.   The error message reads:   """A problem occurred during the test. Click "Edit" to check your settings, and then try again. For more information, visit hp.com-support        Ideally, I'd like scans to plop right on my Desktop.   I'd settle for any folder, however.
    Here's my current pathway, which seems to be unacceptable:  \\MYMAC\Public\Scans.  
    I've also tried:  \\MYMAC\MYNAME\Public\Scans
    I've also tried:  \\MYMAC\MYNAME\Public
    I've also tried:  \\MYMAC\MYNAME\Scans
    I've also tried:  \\MYMAC\DESKTOP\Scans
    I've also tried:  \\MYMAC\MYNAME\DESKTOP
    I've also tried prayer, beer, and breaking things.    Now I thought I'd try this forum.

    If this is a windows computer, save the folder on the C: drive and use the CMD prompt and type  ipconfig  then take note of the IP address of the PC and make the scanner path very simple.  For example, if my computer's IP address was 192.168.0.13 and I saved my folder to the C drive titled Scans, the file path would look like this:
    \\192.168.0.13\Scans  or even just 192.168.0.13\Scans
    Then update the scanner defaults to go to that folder and do a test scan, making note of the exact error message if one appears.
    It sounds like you could be having an authentication error.  Let me know if you would like assistance as the date on this is kinda far back.  
    Always happy to help.
    Officejet Pro Series Information - maybe you'll find some links in here more helpful than your manual.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Officejet Pro X576dw MFP and Yosemite won't scan

    Our new Officejet Pro X576dw MFP no longer scans. It was working fine and I'm not 100% sure that it stopped scanning when I upgraded to Yosemite, or if that's just a coincidence. The computer monitor is an iMac.
    The error message is 
     The scan could not be completed due to one or more of the following issues:
    -Connection to the computer is lost
    -The scan application on the computer is currently in use
    -OCR application is not installed on the computer
    See the computer monitor for details.
    When I try the work around of scanning through the Preview app, the document doesn't feed into the scanner. The wheels turn but the document doesn't feed. A document is imported to the computer monitor but it's blank.
    I really need the scanner to work.  Any ideas?

    I've found a work around.  Open System Prefs/Printers & Scanners. Click on HP Officejet Pro X576dw MFP in the left hand pane, then Scan at the top of the box on the right.  Load your document into the scanner and click Open Scanner. Now, make sure the "Use Document Feeder" box in new Scanner window is checked and click Scan in the bottom right of the window. If thta box isn't checked nothing will happen.
    You'll find the scan titled "Scan" in the Pictures folder.

  • Cannot scan or copy with HP OfficeJet Pro X476dw MFP

    I purchased an HP OfficeJet Pro X476dw MFP a few months ago.  For about 1 month, everything was going great.  Now I cannot scan or copy (although printing from various computers on my home network still works just fine).  Whenever I try to scan (to either a computer on the network or to a memory stick) or a simple copy, the "magic wheel" just keeps spinning and there is a red x on the lower right of the control panel.  Any suggestions?  Calling the HP support desk has been absolutely worthless.  I get put on hold, get transferred 3-5 times, and I literally cannot understand the people I am talking to.

    Hi,
    I suggest reading this post and following the same instructions provided orginally, as this is the Consumer Forums!
    http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/Printhead-issues-with-HP-Officejet-Pro-...
    Thanks.
    I worked on behalf of HP.

  • Can i back up multiple macs to the same hard drive

    can i back up multiple macs to the same hard drive

    Yes, you simply share the drive to the network.. in whatever way that is possible as you have given us no info.. over the network TM will create sparsebundles.. locally it can produce a straight backup ..
    http://code.stephenmorley.org/articles/time-machine-on-a-network-drive/

  • Can not print from my pc using time capsule's printer, but the mac in the office will.  PC sees the network just not the printer connected to the capsule.

    I can't get my pc to see the printer connected to the time capsule, it sees and connect to the network but will not see the printer.  The mac in the office see both the network and the printer connected to the capsule.

    Suggest that you check to make sure that you installed Bonjour Print Services for Windows v2.0.2 on the PC.
    Run the program and hopefully it will find your printer so you can select it and click to get things going.

  • Hello sir        i have mac os x lion and A fter upgrading to Lion  i can't instal the face time app its type ( FaceTime can't be installed on "Mac" because the version of Mac OS X is too new. )   can anyone help me please .   notes : on snow leopard the

    hello sir
           i have mac os x lion and A
    fter upgrading to Lion  i can't instal the face time app its type ( FaceTime can’t be installed on “Mac” because the version of Mac OS X is too new. )   can anyone help me please .
    notes : on snow leopard the face time was work normally but i delete it the app i thought it will work after i reinstall it

    Lion comes with FaceTime. Look in your dock or in the Applications folder.

  • I'm all Mac across the board: iPhone 5, Macbook Pro, Apple TV etc. I can't get the movies I've purchased on my Apple TV to appear in my iTunes library for viewing- Any suggestions? I have iTunes Match turned on and everything.

    I'm all Mac across the board: iPhone 5, Macbook Pro, Apple TV etc. I can't get the movies I've purchased on my Apple TV to appear in my iTunes library for viewing… Any suggestions? I have iTunes Match turned on and everything.

    Thanks Terence! I can see iTunes library from neither iPhoto or iMovie . I'll check on iTunes forum.

  • I cannot share information to my mac from my i phone with iCloud.. i can only share from my mac to the iPhone :s every setting seems to be find with iCloud.. any ideas ?

    i cannot share information to my mac from my i phone with iCloud.. i can only share from my mac to the iPhone :s every setting seems to be find with iCloud.. any ideas ?

    It may because you have iCloud and On your Mac views set up.
    Let's work with Contacts....
    1.  Open Contacts
    2.  Preferences
    3.  Accounts
    Does your screen look like this?
    2

  • Can I control a network of Macs across the internet with ARD?

    Hi,
    Can I control a network of Macs across the internet with ARD?
    I seem to only be able to control one mac at a time. Am I missing something?
    Thanks
    Matt

    To be able to connect to a workstation from outside it's network, the ports that ARD uses must be open on both ends of the connection. ARD uses ports 3283 and 5900 so those must be open.
    If your workstations get their addresses from an NAT device rather than being "real", the ports also need to be forwarded in the router to the workstation's internal IP address. ARD uses port 3283 for the reporting and updating function, so if your Macs are getting their IP addresses through NAT, since you can only forward a port to a single workstation, you can only get reports, push package/files to etc. for a single workstation.
    ARD uses the VNC protocol for observation and control, though, and there are a range of IP addresses for that protocol, starting with 5900. ARD uses 5900 by default, so that port would be forwarded to the first workstation. You would, I believe, need to install VNC servers on the systems (since the ARD client cannot listen on any port other than 5900 while VNC servers can be set for other ports such as 5901, 5902, etc. You would then forward 5901 to the second workstation (and on to 5902, 5903, etc.). You can then use the following information:
    Remote Desktop: How to specify a port number for a VNC client
    to connect.
    The only other options are: 1) to run the ARD administrator on a workstation on the network, and then take control of that system from outside, either via VNC or another copy of ARD, or 2) set up a virtual private network (VPN) so that when you connect from outside, your admin system is officially part of the local network.
    Hope this helps.

  • I received a $15.00 gift card. All but $.99 has been used. I want to make other purchases but can't as I'll be over the .99 with the tax......Of course I have a credit card on file, someone please tell me what to do in order to make another purchase? Than

    I received a $15.00 gift card. All but $.99 has been used. I want to make other purchases but can't as I'll be over the .99 with the tax......Of course I have a credit card on file, someone please tell me what to do in order to make another purchase?
    Thanks.

    JaniNY wrote:
    I thought of that, but my question is does it automatically flip to the CC.
    Yes.
    If you have a gift card balance, iTunes will use that.
    If the total is more than that, the difference will be charged to your credit card.
    You need do nothing.
    See this -> iTunes Store: How to redeem a code
    Free song credits are redeemed first.
    If you have no free song credits, gift certificate, prepaid card, and allowance credits are used next.
    If your gift certificate, prepaid card, and/or allowance credit is less than the total cost of the purchase, your credit card is billed for the remaining balance.
    If you have no free song credits or gift certificates, prepaid cards, or allowance credits, your credit card is billed for the songs you buy.

  • Can I use a phone purchased in the US with a Canadian service provider?

    Can I use a phone purchased in the US with a Canadian service provider?

    So if I buy it from an Apple store in the US and bring it to Canada I would be able to use it with a Canadian Provider?
    In Canada an iPhone5 is 699 in the US it's 199 ....

  • How can i stop apps from running in the background with the new ios7 update

    How can i stop apps from running in the background with the new ios7 update

    Double tap the Home button...slide the last used view of the app(above the icon) up. Tap Home button when finished.

  • Hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

    hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

    Hi vijayanandhtkp,
    It sounds like you are getting the Connect to iTunes screen as discussed in this article.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    If so, please check out this article as linked from there.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Thank you for using Apple Support Communities.
    Nubz

  • How can I download the Printer Manuel for OfficeJet Pro 8500A. Thank You.

    How can I download the Printer Manuel for OfficeJet Pro 8500A.  The easy way.  Thank You.
    This question was solved.
    View Solution.

    Hi,
    You can download the User Guide on the link below.
    http://h10032.www1.hp.com/ctg/Manual/c02668142.pdf
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • Ssrs 2008 r2 using parameter values

    In an existing ssrs 2008 r2 report, I have a requirement from a user where they want to add 2 more parameters to the report. Right now there is an option where the user can choice to generate report1, report2, report3, report4, report5, report6, repo

  • Single user is not able to print PDF files.

    I have the following situation at our organisation for one of our users. Printer: Kyocera FS1030D Kyocera KM-C3225 I have one user that is not able to print any PDF files in our network. (User Chris) Printing a Word document or Notepad works fine. To

  • Not able to edit the Webdynpro Adobe Form

    Hi all,              I am new to Adobe interactive forms. I have created an small application which includes the text boxes & tables. But when i execute the application I am not able to edit any of the text field values. we have done all the ADS Conf

  • Ubuntu Unity: help needed in order to succesfully build it

    Unity (now on AUR) can't be built right now due to the fact that some of it's dependencies can't be built. For example, nux-bzr. It doesn't find "glewmx", even though it's currently installed. If there are any suggestions, please post them here, so t

  • Payment Term with Day Limit

    Hi All, Could anybody will give bit explanation how will SAP will work in below Scenario:    Customer: X--- Assigned with Payment Term: ZB08 At OBB8, we defined two Paymet Term with ZB08, day limit are different. While posting document to vendor, whi