Can't update project-menus become disabled after disc image save

I hope someone can help me understand if this is a bug or something I am doing wrong. I can never update a iDVD project with a new movie file, or change anything to the movie file (make it loop or stop looping). I have to create a new iDVD project anytime I want to make a change at all. If I change anything, once I save as disc image, the menu button becomes disabled and no longer works, even though the preview in the project window is fine.
I tried to change the file to a looping movie in the map view, saved the disc image, menu became disabled.
I am getting really frustrated because everytime I have to make a change I am starting all over creating a project from scratch yet again.
Is this a bug?
Thanks for input,
Cheryl

So here's the deal and I have done some surfing around these boards and have run across others that are encountering this same issue.
I have been able to, in the past, create a menu which plays a slideshow which looped (from iMovie or not). Suddenly, I can no longer create a looping slideshow AT ALL in iDVD.
I ran a test this morning where I deleted my .plist, restarted, then shared a .dv file from iMovieHD to iDVD6, created a simple menu with a "PLAY" button, saved as disc image, loaded up on my computer and it worked fine.
THEN, I did the whole sequence of events again as above, but this time, set the movie to "LOOP" in the map view - WHAM the menu "PLAY" button no longer works when I load it on my computer. The menu comes up, as it should, but the PLAY button doesn't start the movie.
I am now thinking this is a corruption in the software and I need to reinstall, why else would a feature suddenly STOP working???
Thanks for any advice.

Similar Messages

  • Can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion

    can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion. when restart and i press command it still has recovery mountain lion show on my screen.

    What model is the MBP? Did it come with OS 10.6 or a later OS? Is the install DVD one that came with it or something else?
    You can't run an OS older than Mac on it.
    But if came with 10.6 installed & you have the system discs, you should be able to erase the drive & reinstall the original OS.

  • Can I update datas of Power Query after making relation tables in Power Pivot ?

    Can I update datas of Power Query after making relation tables in Power Pivot ?
    I want to update datas at day by day to viewing today's graph by Power View on Excel.
    Power Query use to transform web site to Power Pivot data model table.
    Power Pivot use to making relasing tables, and making measuers.
    Regards,
    Yoshihiro Kawabata.

    Hi Yoshihiro,
    Can you share an example of the things you are doing in Power Pivot? There are some operations that prevent the query from being refreshed in Power Query; this is not ideal so we are currently working on fixing it.
    Thanks for your feedback.

  • Mass Contract Update - Item price become zero after Tax Code change

    HI Guru,
    I have issue on the contract net price which become zero after change in Tax code of item.
    Took the opportunity to update contracts to reflect the changing VAT code (from V0 to V1 for some items) from the Trx code: MEMASSCONTRACT. However, having run the transactions (ME33K) above the contracts are now displaying zero prices on the Item Overview.  The conditions are all correct (PB00) and the follow on purchase orders seem to be picking up the correct prices but we need to resolve the issue of zero prices on the item overview. 
    Please help me in this why it is happening like this? & what is the solution for it.
    Thanks in advance
    Praveen Katageri

    Hi,
    If pricing picking , just check  validity period ( Valid from & Valid to) in  condition of the  Info record.Also check any scale is used & price active or not in condition of Info record.
    Regards,
    Biju K

  • Can I update with a CAB file after I installed BizTalk ?

    Can I update my base configuration of BizTalk with a cab file after everthing is installed and configured ?
    I missed installing it while I was installing BizTalk for the first time, now I want to update it with a CAB file. Is that possible ?

    Hi,
    BizTalk Server relies on different products and technologies to provide essential services and features. CAB file contains softwares that are required by BizTalk server to
    successfully install on your computer.
    You can select the cab file based on the edition and server you working with. Link below:
    Redistributable CAB Files
    Now coming to your question, as I have mentioned above the CAB file contains the
    prerequisites
    required for successful installation of BizTalk. While installing BizTalk on Redistributable
    prerequisites
    screen you must have either manually or automatically installed the CAB file already.
    If you have already successfully installed and configured BizTalk, I dont see any issue with the CAB file.
    I don't buy that 90% consumption of the CPU is due to bad or wrong CAB file selected while installing BizTalk.
    I would advise you to go through the below link:
    What you need to do to prepare for and install BizTalk Server
    Rachit

  • Can't update or download apps anymore after updating to ios8

    i don't know what to do, since updating to iOS 8 I can't update or download apps ,does anyone here know a solution to this? Please help thanks

    I have a very simple web page that uploads pictures (.jpg or .gif) and when I updated my iPAD to IOS8 this morning the web page times out for any upload.
    My web Page uses a very old HTML form like this :
    This html form works on all the following browsers, but not Safari on the new IOS8 on my iPAD
    Google Chrome Version 37.0.2062.120 m
    FireFox 30.0 & 32.0.2
    Internet Explorer Version 11.0.9600.16428IC
    Safari Revision 5.1.7 (7534.57.2)
    iPAD IOS8 Browser has a very serious bug that needs fixed.
    The only way I found to put in a ticket on this is through apple.com/feedback, which I did.
    Tommie B.
    <Personal Information Edited By Host>

  • LR 4.4 Can't update this collection in flickr after Yosemite installed

    Currently have LR 4.4. Just installed Yosemite as my OS on my late 2011 mac. Now when I try to publish a photo to flickr in LR I get a message headed 'Can't update this collection' and the photo will not publish. Any help appreciated.

    Lightroom 3.6, 64-bit, Windows 7, 64-bit, everything fully patched. Happens to me also. Doesn't matter whether I have captions or other metadata or not.
    Just now I was able to upload a 17-picture set to Flickr, first time in a week I've gotten more than about 6 pictures to upload.

  • My Norton anti-virus not compatible with firefox add-ons anymore? I can't update without Norton being disabled your warning tells me.

    You sent me a software update. It tells me you found an incompatible add-on. It further tells me that my Norton Vulnerability Protection 11.3.0.9-5 won't work with this update, and will be disabled. I'm suppose to wait until they're compatible and then you will update and re-enable my Norton Protection?? I don't know that much about computers but I do know I need to protect it. I just bought this Norton Anti-Virus Protection at Christmas and now you are telling me it's no good? What am I suppose to do in the meantime? Like I said, I don't know much about this so please use simple terms and be specific.
    Thank You!
    Suzanne Noonan

    That link is for the tool bar, not the vulnerability protection component. The latter is a known issue with Symantec and apparently was a conscious decision on their part on getting patches out in a timely manner at the expense of breaking some functionality.
    [http://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Norton-Vulnerability-Protection-and-Firefox-22-0/td-p/980305/page/10 Norton Vulnerability Protection and FF 22]

  • Pixelation occurring after disc image burn

    I'm having a problem with pixelation after performing a disc image burn through iDVD.  I'm filming with Sony AX-2000 cameras onto Sony Memory Sticks, and loading the footage as Apple ProRes 422.  The footage looks fine and no pixelation once loaded.  After the edit is complete, I'm exporting it as a Quicktime self-contained movie, using "current settings" like I always have in the past.  This QT self-contained movie file looks fine once complete, and there is no pixelation in it.
    However, once I pull that file into iDVD, and then burn a disc image of it, I'm getting pixelation, but only in certain places.  This is BEFORE I burn the actual DVD, but the pixelation does show up on the DVD.  I'd say out of a 90 minute wedding video, there is a total of 5 minutes of pixelated footage spread out primarily over the first 30 minutes of the DVD.  I've burned the disc image twice now, and it's pixelating in the same places.
    I've been using this same process for the past 1 1/2 to 2 years without trouble on all my projects, but for some reason this wedding video is getting pixelation.  I have no idea what to do and welcome any suggestions. 

    A couple of thoughts:
    I assume you're evaluating the DVD on a television…because computer playback often gives misleading results.
    If the artifacts continue to show up in TV playback, then try some tests using Compressor and/or DVD Studio Pro. Start with a small segment that includes the problem footage, and choose the 120 minutes Best Quality DVD preset. In Encoder, open quality and goose the bit rate up until the point where  you're approaching the time limits of your video (the "allows" message provides time feedback at the bottom of the pane).In Frame Controls set Resize Filter to Best. In Preview, insert compression markers at the points where the artifacting begins. Either have Compressor spit out a test DVD as a job action or bring in into DVDSP to make a build without a menu. Evaluate.
    Hopefully, you'll find the right recipe.
    Russ

  • HT5622 how can i update my existing apple game after changing the apple ID?

    can somebody help me? i have an existing apple games which i installed using my old apple ID. After my first apple ID has been compromised i changed it into a new one. now everytime there's an update to my games its still asking for my old apple ID. I try to delete the games and install once again but during updates its still asking for the old apple id and password. I get sick of it because i spend a lot o money and time for that games which i cannot play anymore because i cant update them. Please HELP...

    Are you logged into iTunes with the same Apple ID on both devices? After deleting the game on the iPhone, did you also delete it from your iTunes on the computer that you might be syncing with? Did you delete it from the iPad before purchasing/reinstalling on the iPad? This could be where your issues start.

  • Can't update project from AIR 3.1 to AIR 3.4 or 3.5

    Hello
    I have a Flex mobile project for iOS and Android created one year ago with Flex 4.6.0 and Air 3.1.
    It can't include the new required icons size for iOS.
    I tried to update my Air SDK to 3.4 and 3.5, but my project does not compile any more
    I followed the procedure for updating, using the ditto command on mac OSX, updating the namespace in the app.xml file... but it just does not compile
    I have error messages like :
    Could not resolve <s:LinearGradient> to a component implementation.
    Could not resolve <s:SolidColor> to a component implementation.
    Any idea?

    Solved by installing Flash builder 4.7 then upgrading Air SDK version to 3.5.

  • Can't update iPhoto and other apps after upgrading to Yosmite.  Bought the computer at a Mac Store complete with iPhoto, iMovie, Numbers, Pages etc so the App store sayes we can't upgrade because these were not purchased through the App store.

    Until this gets resolved we can't access iPhoto or my iPhoto library.  Unfortunately didn't back up my photos before we "upgraded" to Yosmite.  Any ideas?

    You need to update the information regarding what Mac this is and what version of OS X you're running.
    You show a PB G4, which won't run the Mac App Store.

  • Why can't I use menus for bookmarks after right-clicking?

    When opening the bookmarks menu (from Menu Bar), and right clicking on a bookmark, all the choices are shown in light grey color, and I can't click anything of it. Why doesn't this work?

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • My entire project keeps becoming unrendered after about a minute

    Hi guys, hopefully someone can help me with this.
    I'm making a documentary in HD, so it's a pretty big project file. Yesterday when I opened the project, it loaded everything and worked for about 1 minute, then I got the spinning wheel for a minute or two, then every single video clip in the entire project became unrendered. I closed it out and didn't save it and everytime I open it back up it keeps doing the same thing. It's doing this when I'm not even editing, I was just watching clips and transcribing them.
    I have tried making a copy of the project file in a different location just to see if it would work normally, and changing to unlimited RT and I trashed my preferences, but none of that is working. I also closed out all of the sequences except one, because I did have a lot of them open at once and I thought that might be overloading it or something, but that didn't help either.
    Any ideas? I don't want to have to end up re-rendering the entire thing every 30 seconds and I can't really edit without being able to see the video...
    Thanks,
    Lisa

    The media is 1920x1080, 60i, I think the setting is FX or whatever the highest one is on a Canon Vixia HF200.
    The Sequence is set to Apple Intermediate Codec, HDV 1080i60 (mine doesn't show up with an AVCHD option for this...or a 1920x 1080, I'm pretty sure the sequences are 1440x 1080...Anyone know what the deal is with that?)
    I'm using Final Cut Express 4.0
    And the project was working fine up until now. But, last week one of my hard drives kept somehow ejecting itself. I ended up being able to close it without saving and reopen so I didn't have to "reconnect media" and render.

  • How can I update existing website with Iweb after hard disc crash?

    I created my website on iweb and published it (but not at mobile me). Unfortunately my hard disc crashed, before I saved my webpage. Now I bought a new web and want to update my published website. How do I open it in my new Iweb 9 to update it?
    Thanks for your help,
    orisu

    Your iWeb data is stored, not in your actual published html files, but in a file called Domain.sites which is stored in your Home/Library/Application Support/iWeb folder. If you want to work on your site on another computer, copy this file to a thumb drive to move it around.

Maybe you are looking for