Can't write semicolon in script editor.

That's all, i can't write it, why is that, and how to fix it.
thanks

OK!
You need to set the shortcut of "controls/move to next frame" in Edit >> Keyboard shortcuts

Similar Messages

  • How Can I write a script for change first indent?

    How can I write a java script to tell indesign:
    what ever the text first indent is, I want to change first indent =
    1) 8mm
    2) 0mm
    3)-8mm (if left indent is 0, change the first indent to 8mm, and then change first indent = -8)
    3 scripts
    Please someone help me, please!

    Hi hasive, thank you for your responses, thank you very much,
    I need three scripts
    1st script, I want to set the first indent to 8mm;
    2nd script, I want to set the first indent to -8 mm, but if the left indent is 0, please set the left indent to >8mm then set the first indent to -8mm;
    3rd, I want to set the first to 0mm, if the first indent is 8mm or -8mm;
    thank you
    Harvey

  • What is the Max. Limit of ICM Script Nodes that can be set in ICM Script 8.0

    I am trying to  out the maximum number of Script Nodes that can be set in ICM Script editor , is there any limit on that ?
    I am using ICM 8.5 Version
    I have read that the  value for maximum number nodes that can be executed is configurable as seen in hkey_local_machine\software\geotel\icr\\routerX\router\currentversion\configuration\script\MaxNodesExecuted
    By editing the value help me to increase the No. of Script nodes  in ICM Scripts ?? Appreciate your reply asap.

    Hi,
    Looks like the max. length described in the forms help only applied to actual database column. But if I am defining a non database column, what is the max. limit?
    I tested it by setting to 32K (i.e.32767) and the form accepts and run ok. However, I am not sure whether there will be other side effect or not.
    Kelly.

  • "Files" and other tabs not visible for document library after script editor webpart is added

    I created a document library and uploaded a few documents to ti.  On the ribbon, I could see both "Files" and "Library" tabs.  I then added a Script Editor webpart to this page because I needed to run some javascript on this
    page.  Now, when I go to that document library page (AllItems.aspx) then I don't see the Files and Library tab.  My guess is that this is because these tabs are context sensitive so they only appear when Sharepoint knows you're working with a document
    library and since now I have both the webpart that shows the document library and the Script editor webpart, that context is not there.  If I click somewhere on the page close to the actual list of documents, then the Files and Library tabs reappear since
    now Sharepoint knows that I'm working with a document library.  Is there any way aroudn this?  We don't want to have to ask our customer to click somewhere on the screen in order to get access to these tabs.  I'm not sure why Sharepoint would
    be confused by the Script editor webpart.  It is not visible so when the page is not in edit more, you can't even see that Script editor.  So, my question is: is there any way to:
    - either find some other way of using javascript on this page (maybe external javascript file with some link to it on the page?
    - or, some way to force the Fiels and Library tabs to be visible no matter what (i.e. despite having the Script editor webpart on the page).
    I also experienced this issue when I wanted to insert some customized text on the same page that had a document library.  For example, I created a document library and then on the AllItems.aspx page I inserted a content editor webpart so that I can
    show some text at the top.  That also caused the Files and Library tabs to disappear.
    thanks,

    Hi,
    I understand Files/Libraray tab disappear after you add web parts to a document library, once you click somewhere in library list, it will appear again.
    This is by design. As workaround, please try to use SharePoint Desginer to edit Allitems page of document library instead of using script web part.
    https://social.msdn.microsoft.com/Forums/office/en-US/fd1bb098-6425-437c-b3f8-25bf65bcaad3/ribbon-control-disappears-on-sharepoint2013-document-libraries-when-content-editor-web-part-has?forum=sharepointdevelopment
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Write the results script of results log pane to XLS or CSV file with VBA.

    Hi,
    How can I write the results script of results log pane to XLS or CSV file with VBA code or something? I tried so hard but i can't.
    Thanks

    MoGas,
    This is actually not a trivial process. You need to use the results object and code it to write to your file (it is described in the help files).
    e-Tester automatically saves the results log as a text file so you may just want to stick with that for simplicity.

  • How can I write a script or create a macro for gaming.

    Now I know this may be a petty and or silly question for most apple users but I am going to throw it out there anyway. I play an online game called Battle Pirates. When you make an attack you have up to 5 ships to control. I am looking for a way to control multiple ships with a "macro" or "script" and using only 1 key. For example: Select ship 2, 3, and 4 while leaving ship 1 and 5 alone. Yea I know it is childish but indulge me. Hahaha.
    I know you can write Macros with Windows and you can even use something called "Auto Hotkey". I just wanted to see if anyone knew of a way to do this with what Apple already has in place. What I have commonly found out with Apple products is that since I have come from being a Windows user to Apple, I usually overthink the process. LOL. Mac's are soooooo much easier....if you know where to start.
    Any help would be greatly appreciated! By the way, I have read the tutorial on "Script Editor" but I am having trouble understanding it mostly because you kinda would have to have SOME programming knowledge. Obviously I lack in that area. Thanks for bearing with me.

    Can you expand on that? How do you use automator in your game? Can you give me a rough idea of how and what you do with it? I have watched a tutorial on Automator and it seems more useful for documents.

  • How to write select statement into SCRIPT editor

    hello,
    i build a sap script for purchase order printing for exporting.
    now after all po order print fine then our client want some more should be print into layout regarding po header.
    At the soul my q is can i write select query into script editor itself.
    thanks and regards
    amit.

    You cannot write your select statement inside your SAPscript, to overcome this SAP has provided us an option of calling sub-routines.. go through the below example
    Go through this example
    Ex. SAPSCRIPT
    /: PERFORM <Subroutine name> IN PROGRAM <subroutine prog name>
    /:USING &<field name>&
    /:CHANGING &<field name1&    "It will be returned back from sub-routine
    /:ENDPERFORM
    Then create subroutine pool program(of your own name) and you have to write the code.
    FORM ><subroutine name> tables int_cond structure itcsy
    outt_cond structure itcsy.
    data : value(20), value1(20). "do your own declarations
    Read int_cond table index 1.
    value = int_cond-value.
    value1 = value1 + value.
    *****Write your select statement
    Read outt_cond table index 1.
    outt_cond-value = value1.
    Modify outt_cond index 1. 
    ENDFORM.
    Just rough idea given above.
    Regards,
    SaiRam

  • Interactive Scripting Editor (ISE) how to write a class for an action?

    Hi - I need to write a class for an action in the interactive scripting editor.  The class will create a new case (case management) and return the number.  I have created a class with a method that does this and has been fully tested but we cannot get it to work as part of an action within the ISE.  Are there any guidelines for writing classes for the ISE.  Or  has anyone done this?  Do I need a super class?  I have searched every where but can find nothing on this.  Many thanks.

    Hi Nigel,
    I am also looking for the answer to this.  Please let me know when you find a solution.
    Kind Regards,
    Andrew Griffin.

  • My $20 to the person who can write this simple script for Fission

    Here is what I need to automate. I don't care if it's an Apple Script, or an Automator work flow - whatever - just so it will work with my present setup. Once I test it and it works, I'll send $20 to the first person who can help me.
    Script needs to apply to each (and every) MP3 file in a selected folder:
    Open the first file with Fission v1.6.6 (from: www.rogueamoeba.com)
    Select all
    Normalize
    Save audio (in same folder)
    A warning dialog pops up: "File already exists..." -- answer with "Replace"
    Close file
    Repeat for next file in the folder, until every file has been Normalized
    End script when the last file in folder has been Normalized
    I don't mind finding the folder (which will be in my iTunes Library), and then starting the set of actions on the folder but I definitely don't want to be required to take any additional action on each and every file.
    I'm presently running Fission v1.6.6 under MacOS 10.4.11 on a PPC desktop, so it needs to work in that environment.
    Note that the latest version of Fission requires MacOS 10.5 - I can't use any script that requires that version. Rogue Amoeba's Legacy software page (http://www.rogueamoeba.com/legacy/) shows Fission v1.6.8 as working with 10.4, but that contradicts the Version History for Fission which shows 1.6.6 as the last one for 10.4 - still investigating.

    Pierre L.
    Thanks for the effort!
    First, I can clarify this: Rogue Amoeba confirms that I can use the version 1.6.8 of Fission located on their Legacy page with my OS version 10.4.11, so I've upgraded from 1.6.6 to 1.6.8. Seems to be working OK.
    Next, let me apologize for being mostly ignorant about all things AppleScript. I'm really in over my head, here, because I've not used the ScriptEditor for more than a few minutes before today.
    What I've done so far:
    I checked the box in the Universal Access preferences pane to enable access for assistive devices.
    I copied your script from this forum and pasted it into Script Editor.
    I've Compiled your script, then "Saved As" an "Application" on my Desktop.
    When I double click the icon for the saved script (which ends in xyz.app), a navigation window appears, which I used to select a test folder on my desktop.
    When I Choose the test folder, Fission launched, and selected the whole file, as expected. Then I get an error:
    "NSReceiverEvaluationScriptError: 4" - with buttons to "Edit" or "OK"
    Thinking it might be a timing error, I edited the delays:
    set theFolder to choose folder
    tell application "Fission" to activate
    tell application "Finder"
    set theApp to POSIX path of (get file of process "Fission")
    set theFiles to document files of theFolder
    repeat with thisFile in theFiles
    open thisFile using POSIX file theApp
    tell application "System Events" to tell process "Fission"
    delay 18 -- adjust if necessary
    keystroke "a" using command down -- Select All
    delay 2 -- adjust if necessary
    click menu item "Normalize Selection" of menu 1 of menu bar item 7 of menu bar 1
    delay 4 -- adjust if necessary
    keystroke "s" using {shift down, command down} -- Save Audio…
    delay 3 -- adjust if necessary
    keystroke return -- Save
    delay 2 -- adjust if necessary
    click button "Replace" of sheet 1 of window "Save Audio"
    end tell
    end repeat
    end tell
    tell application "Fission" to quit -- optional
    ... Compiled, and Saved again.
    Now, the script runs up to the point where it should answer the Save pop-up window: "File already exists..." with the keystroke to "Replace" - but the script stops there, with the same error: "NSReceiverEvaluationScriptError: 4"
    Bottom line: so far, I've been able to get the first mp3 file in my test folder Normalized, but not Saved. Any suggestions?

  • Can not open script editor in HDS

    Hi everybody,
    When we open Script Editor, we see the notice: "cannot connect to distributor, script editor will now exit"
    Can you help me to resovle it?
    We use ICM 7.1
    Thanks you so much!

    You might also see this message if the services are running, but you are using Windows Remote Desktop (RDP), and are not logged in with console mode.
    Try this:  mstsc aaa.bbb.ccc.ddd /admin
    where aaa.bbb.ccc.ddd is the IP address or hostname of your HDS.  The /admin switch gets you in with console mode. 
    Net-net, you should see the ICM process' console windows on the taskbar.  If you don't, then either the service isn't running, or you're not in /console mode.
    fyi - ICM 7.1 is long-since end-of-life.  You should seriously consider upgrading to a more recent, supported release.

  • How can I use firefox to access Oracle's 10g Express Edition Database script editor?

    I have installed Oracle's 10g Express Edition (xe) Database in my computer, which is running Ubuntu 10.04 64-bit. I can access the database through the command line and by using the web interface on Firefox. However, the script editor doesn't work with Firefox. The scripts are not shown and I'm unable to edit them.

    I have installed Oracle's 10g Express Edition (xe) Database in my computer, which is running Ubuntu 10.04 64-bit. I can access the database through the command line and by using the web interface on Firefox. However, the script editor doesn't work with Firefox. The scripts are not shown and I'm unable to edit them.

  • How can I hide what I write in Java Script

    If I write a script, I offer it to many one to use it, but I don’t want to anyone to see what I write in the script, how can I do?

    In ESTK go to "File" and select "Export as Binary..."
    HTH
    Marijan (tomaxxi)
    http://tomaxxi.com

  • Can't Open Script Editor

    Hi!
    Yesterday While writing an Applescript, I copy pasted some lines (like 50 lines) of code to my script editor, it freezed so I close it, it no longer opens, every time I open it, it justs Freezes instantly.
    I already tried Restarting and everything.
    I'll probably reinstall it, but how?
    Any ideas??
    Script Editor 2.7
    Mac OSX Yosemite 10.10.2
    I have an MacBook Pro (Retina, 13-inch, Late 2013)

    No error messages on Console and I lost my Recovery CD.
    Where I can find an original copy of the app?

  • How can I write a script for set left indent?

    In three cases as below:
    for example:
    left indent:8mm; first indent:0mm
    left indent:0mm; first indent:8mm
    left indent:8mm; first indent:-8mm
    How can I write a script to tell Indesign, wherever the text indent is, each time when I run the script once, the text can put just a step rightward, and “one step = 8mm”.
    Please!

    Hi, Trevor
    I use change by list as below:
    grep {leftIndent:48mm} {leftIndent:56mm}
    grep {leftIndent:40mm} {leftIndent:48mm}
    grep {leftIndent:32mm} {leftIndent:40mm}
    grep {leftIndent:24mm} {leftIndent:32mm}
    grep {leftIndent:16mm} {leftIndent:24mm}
    grep {leftIndent:8mm} {leftIndent:16mm}
    grep {firstLineIndent:8mm, leftIndent:48mm} {firstLineIndent:8mm, leftIndent:56mm}
    grep {firstLineIndent:8mm, leftIndent:32mm} {firstLineIndent:8mm, leftIndent:48mm}
    grep {firstLineIndent:8mm, leftIndent:24mm} {firstLineIndent:8mm, leftIndent:32mm}
    grep {firstLineIndent:8mm, leftIndent:16mm} {firstLineIndent:8mm, leftIndent:24mm}
    grep {firstLineIndent:8mm, leftIndent:8mm} {firstLineIndent:8mm, leftIndent:16mm}
    grep {firstLineIndent:-8mm, leftIndent:48mm} {firstLineIndent:-8mm, leftIndent:56mm}
    grep {firstLineIndent:-8mm, leftIndent:32mm} {firstLineIndent:-8mm, leftIndent:48mm}
    grep {firstLineIndent:-8mm, leftIndent:24mm} {firstLineIndent:-8mm, leftIndent:32mm}
    grep {firstLineIndent:-8mm, leftIndent:16mm} {firstLineIndent:-8mm, leftIndent:24mm}
    grep {firstLineIndent:-8mm, leftIndent:8mm} {firstLineIndent:-8mm, leftIndent:16mm}
    but not that perfect,
    I want to useing jave "if{}" or "for{}" to write this script, but I don't kown the syntext.

  • Why can't I type in the script editor

    I want to add code to a button. I have the button selected. I choose Events with Scripts from the "Show" drop down menu. However, I am unable to click into the script editor box and type the code. The box is grey'd out.
    Please help.

    I figured it out!

Maybe you are looking for