Can the system name of the Fabric Interconnects be changed

I need to change the system name of the Fabric interconnects
I have given eg. EDCD
the FI now have EDCD-A
EDCD-B
I need to change it to ... ECCD-A
ECCD-B..
is it possible ?

Shyam,
You can definitely do it and for sure is not disruptive and take effect right away.    Just go to the Admin tab> All> Management Interfaces> Name > Edit it with what you need > Apply.
It is so easy and fast that if at the same time you have an SSH session, as soon as you change the name, the system makes the change on your SSH session too.
Note: There is no need to look for the way to do this on each fabric. The name you are changing is for both FIs and the system will then add the xya-A or xya-B by itself.
Rate ALL helpful answers.
-Kenny

Similar Messages

  • How to get the system name of the client?

    Hi,
    I 've followed this Blog:
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/getting%252blogged%252bin%252bportal%252buser%252bdetails%252bin%252bweb%252bdynpro
    getSAPUser() method returns the logged in user name.
    Is it possible to get the System name of the client?
    Thanks,
    RPN

    Hi,
    Following Code returns the System id :
    String sid = System.getProperty("SAPSYSTEMNAME");
                                       if(sid.equals("J2E")){
                                            //Do something                                   }
    Siddharth

  • Changing the system Name after Installing EP

    Hi All,
    I need to change the system name of the server and the IP address of the server after EP is installed. Is it possible to do this? Will the EP work properly?
    Regards
    Arun

    Hi Arun,
    There is many reference in the config of the portal to the server name.
    I doubt you will be able to do it without difficulties.
    If you use KM, you will have trouble with internal links in documents. We had to install an apache server for redirection when we migrated/upgraded from EP6 SP2 to 2004s, because the server's name changed.
    Also, you will need to reinstall the local edit activeX to your users.
    I hope someone can answer you better than me.
    There always the system copy option.
    Brad

  • Probem after changing the system name of EP 6.0 SP9

    Hi,
    I have changed the system name of the EP 6.0 SP9 system and restarted it and after I again shifted back to the old system name and restarted the system.
    Now the j2ee engine is not coming up ...
    I am placing the developer trace.
    Pl. suggest what might have went wrong.
    Thanks & Regards
    Mrutyunjay
    trc file: "E:\usr\sap\D01\JC00\work\dev_jcontrol", trc level: 1, release: "640"
    node name   : jcontrol
    pid         : 5552
    system name : D01
    system nr.  : 00
    started at  : Mon Dec 19 11:14:46 2005
    arguments   :
        arg[00] : E:\usr\sap\D01\JC00\j2ee\os_libs\jcontrol.exe
        arg[01] : pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    JStartupReadInstanceProperties: read instance properties [E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties;E:\usr\sap\D01\JC00\SDM\program\config\sdm_jstartup.properties]
    -> ms host    : portald
    -> ms port    : 3601
    -> OS libs    : E:\usr\sap\D01\JC00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> files [01] : E:\usr\sap\D01\JC00\SDM\program\config\sdm_jstartup.properties
    Instance properties
    -> ms host    : portald
    -> ms port    : 3601
    -> os libs    : E:\usr\sap\D01\JC00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID9391400  : E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID9391450  : E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID9391400            : E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> [01] ID9391450            : E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> [02] sdm                  : E:\usr\sap\D01\JC00\SDM\program\config\sdm_jstartup.properties
    [Thr 2144] Mon Dec 19 11:14:46 2005
    [Thr 2144] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
    [Thr 2144] [Node: bootstrap] java home is set by profile parameter
         Java Home: c:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [bootstrap]
    -> node name       : bootstrap
    -> node type       : bootstrap
    -> java path       : c:\j2sdk1.4.2_08
    -> java parameters : -Djco.jarm=1 -Djco.jarm=1
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 128M
    -> root path       : E:\usr\sap\D01\JC00\j2ee\cluster
    -> class path      : .\bootstrap\launcher.jar
    -> OS libs path    : E:\usr\sap\D01\JC00\j2ee\os_libs
    -> main class      : com.sap.engine.offline.OfflineToolStart
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : E:\usr\sap\D01\JC00\j2ee\os_libs\jstartup.jar
    -> parameters      : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0093914
    -> debuggable      : yes
    -> debug mode      : no
    -> debug port      : 60000
    -> shutdown timeout: 120000
    JStartupStartJLaunch: program = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[00] = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> arg[02] = -DSAPINFO=D01_00_bootstrap
    -> arg[03] = -file=E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> arg[04] = -nodeName=bootstrap
    -> arg[05] = -nodeId=-1
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_5552
    -> arg[07] = -jvmOutFile=E:\usr\sap\D01\JC00\work\jvm_bootstrap.out
    -> arg[08] = -stdOutFile=E:\usr\sap\D01\JC00\work\std_bootstrap.out
    -> arg[09] = -locOutFile=E:\usr\sap\D01\JC00\work\dev_bootstrap
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> lib path = PATH=c:\j2sdk1.4.2_08\jre\bin\server;c:\j2sdk1.4.2_08\jre\bin;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    -> exe path = PATH=c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\JC00\j2ee\os_libs;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    [Thr 2144] Mon Dec 19 11:14:52 2005
    [Thr 2144] JControlExecuteBootstrap: read instance values after global bootstrap
    JStartupReadInstanceProperties: read instance properties [E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties;E:\usr\sap\D01\JC00\SDM\program\config\sdm_jstartup.properties]
    -> ms host    : portald
    -> ms port    : 3601
    -> OS libs    : E:\usr\sap\D01\JC00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    [Thr 2144] JControlExecuteBootstrap: enumerate the nodes after global bootstrap
    Used property files
    -> files [00] : E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> files [01] : E:\usr\sap\D01\JC00\SDM\program\config\sdm_jstartup.properties
    Instance properties
    -> ms host    : portald
    -> ms port    : 3601
    -> os libs    : E:\usr\sap\D01\JC00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID9391400  : E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID9391450  : E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID9391400            : E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> [01] ID9391450            : E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> [02] sdm                  : E:\usr\sap\D01\JC00\SDM\program\config\sdm_jstartup.properties
    [Thr 2144] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID9391400]
    [Thr 2144] INFO: Invalid property value [JLaunchParameters/]
    [Thr 2144] [Node: dispatcher bootstrap] java home is set by profile parameter
         Java Home: c:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [bootstrap_ID9391400]
    -> node name       : dispatcher bootstrap
    -> node type       : bootstrap
    -> java path       : c:\j2sdk1.4.2_08
    -> java parameters : -Djco.jarm=1 -Djco.jarm=1
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 170M
    -> root path       : E:\usr\sap\D01\JC00\j2ee\cluster
    -> class path      : .\bootstrap\launcher.jar
    -> OS libs path    : E:\usr\sap\D01\JC00\j2ee\os_libs
    -> main class      : com.sap.engine.offline.OfflineToolStart
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : E:\usr\sap\D01\JC00\j2ee\os_libs\jstartup.jar
    -> parameters      : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID009391400
    -> debuggable      : yes
    -> debug mode      : no
    -> debug port      : 60000
    -> shutdown timeout: 120000
    JStartupStartJLaunch: program = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[00] = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> arg[02] = -DSAPINFO=D01_00_bootstrap
    -> arg[03] = -file=E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> arg[04] = -nodeName=bootstrap_ID9391400
    -> arg[05] = -nodeId=-1
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_5552
    -> arg[07] = -jvmOutFile=E:\usr\sap\D01\JC00\work\jvm_bootstrap_ID9391400.out
    -> arg[08] = -stdOutFile=E:\usr\sap\D01\JC00\work\std_bootstrap_ID9391400.out
    -> arg[09] = -locOutFile=E:\usr\sap\D01\JC00\work\dev_bootstrap_ID9391400
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> lib path = PATH=c:\j2sdk1.4.2_08\jre\bin\server;c:\j2sdk1.4.2_08\jre\bin;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    -> exe path = PATH=c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\JC00\j2ee\os_libs;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    [Thr 2144] Mon Dec 19 11:14:58 2005
    [Thr 2144] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID9391450]
    [Thr 2144] INFO: Invalid property value [JLaunchParameters/]
    [Thr 2144] [Node: server0 bootstrap] java home is set by profile parameter
         Java Home: c:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [bootstrap_ID9391450]
    -> node name       : server0 bootstrap
    -> node type       : bootstrap
    -> java path       : c:\j2sdk1.4.2_08
    -> java parameters : -Djco.jarm=1 -Djco.jarm=1
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 1024M
    -> root path       : E:\usr\sap\D01\JC00\j2ee\cluster
    -> class path      : .\bootstrap\launcher.jar
    -> OS libs path    : E:\usr\sap\D01\JC00\j2ee\os_libs
    -> main class      : com.sap.engine.offline.OfflineToolStart
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : E:\usr\sap\D01\JC00\j2ee\os_libs\jstartup.jar
    -> parameters      : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID009391450
    -> debuggable      : yes
    -> debug mode      : no
    -> debug port      : 60000
    -> shutdown timeout: 120000
    JStartupStartJLaunch: program = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[00] = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> arg[02] = -DSAPINFO=D01_00_bootstrap
    -> arg[03] = -file=E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> arg[04] = -nodeName=bootstrap_ID9391450
    -> arg[05] = -nodeId=-1
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_5552
    -> arg[07] = -jvmOutFile=E:\usr\sap\D01\JC00\work\jvm_bootstrap_ID9391450.out
    -> arg[08] = -stdOutFile=E:\usr\sap\D01\JC00\work\std_bootstrap_ID9391450.out
    -> arg[09] = -locOutFile=E:\usr\sap\D01\JC00\work\dev_bootstrap_ID9391450
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> lib path = PATH=c:\j2sdk1.4.2_08\jre\bin\server;c:\j2sdk1.4.2_08\jre\bin;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    -> exe path = PATH=c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\JC00\j2ee\os_libs;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    [Thr 2144] Mon Dec 19 11:15:05 2005
    [Thr 2144] JControlIBuildProcessList: Maximum error count is set to 4
    [Thr 1424] JControlRequestFunc: Thread 1424 started as listener thread for np messages.
    [Thr 2144] INFO: Invalid property value [JLaunchParameters/]
    [Thr 2144] [Node: dispatcher] java home is set by profile parameter
         Java Home: c:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [ID9391400]
    -> node name       : dispatcher
    -> node type       : dispatcher
    -> java path       : c:\j2sdk1.4.2_08
    -> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Djco.jarm=1 -XX:NewSize=28m -XX:MaxNewSize=28m -XX:+DisableExplicitGC -Drdbms.driverLocation=D:/oracle/D01/920/jdbc/lib/classes12.jar -Dsys.global.dir=E:/usr/sap/D01/SYS/global/
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 170M
    -> root path       : E:\usr\sap\D01\JC00\j2ee\cluster\dispatcher
    -> class path      : .\bin\boot\boot.jar;.\bin\system\bytecode.jar;.
    -> OS libs path    : E:\usr\sap\D01\JC00\j2ee\os_libs
    -> main class      : com.sap.engine.boot.Start
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : E:\usr\sap\D01\JC00\j2ee\os_libs\jstartup.jar
    -> parameters      :
    -> debuggable      : no
    -> debug mode      : no
    -> debug port      : 60000
    -> shutdown timeout: 120000
    [Thr 2144] INFO: Invalid property value [JLaunchParameters/]
    [Thr 2144] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx512M [jstartxx.c   2282]
    [Thr 2144] [Node: server0] java home is set by profile parameter
         Java Home: c:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [ID9391450]
    -> node name       : server0
    -> node type       : server
    -> java path       : c:\j2sdk1.4.2_08
    -> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:UseParNewGC -XX:MaxNewSize=85M -XX:NewSize=85M -XX:DisableExplicitGC -XX:MaxPermSize=192M -XX:PermSize=192M -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Drdbms.driverLocation=D:/oracle/D01/920/jdbc/lib/classes12.jar -Dsys.global.dir=E:/usr/sap/D01/SYS/global/
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 512M
    -> init heap size  : 512M
    -> root path       : E:\usr\sap\D01\JC00\j2ee\cluster\server0
    -> class path      : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path    : E:\usr\sap\D01\JC00\j2ee\os_libs
    -> main class      : com.sap.engine.boot.Start
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : E:\usr\sap\D01\JC00\j2ee\os_libs\jstartup.jar
    -> parameters      :
    -> debuggable      : no
    -> debug mode      : no
    -> debug port      : 50021
    -> shutdown timeout: 120000
    [Thr 2144] [Node: SDM] java home is set by profile parameter
         Java Home: c:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [sdm]
    -> node name       : SDM
    -> node type       : sdm
    -> java path       : c:\j2sdk1.4.2_08
    -> java parameters :
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 128M
    -> root path       : E:\usr\sap\D01\JC00\SDM\program
    -> class path      : E:\usr\sap\D01\JC00\SDM\program\bin\SDM.jar
    -> OS libs path    : E:\usr\sap\D01\JC00\j2ee\os_libs
    -> main class      : SDMInternal
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : E:\usr\sap\D01\JC00\j2ee\os_libs\jstartup.jar
    -> shutdown class  : com.sap.sdm.jstartup.shutdown.InternalShutDown
    -> parameters      : server sdmhome=E:\usr\sap/D01/JC00/SDM/program
    -> debuggable      : yes
    -> debug mode      : no
    -> debug port      : 60000
    -> shutdown timeout: 120000
    [Thr 2144] JControlMSConnect: attached to message server (portald/3601)
    [Thr 892] JControlMSMessageFunc: Thread 892 started as listener thread for ms messages.
    JStartupStartJLaunch: program = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[00] = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> arg[02] = -DSAPINFO=D01_00_dispatcher
    -> arg[03] = -file=E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> arg[04] = -nodeName=ID9391400
    -> arg[05] = -nodeId=0
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_5552
    -> arg[07] = -jvmOutFile=E:\usr\sap\D01\JC00\work\jvm_dispatcher.out
    -> arg[08] = -stdOutFile=E:\usr\sap\D01\JC00\work\std_dispatcher.out
    -> arg[09] = -locOutFile=E:\usr\sap\D01\JC00\work\dev_dispatcher
    -> arg[10] = -mode=JCONTROL
    -> arg[11] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> lib path = PATH=c:\j2sdk1.4.2_08\jre\bin\server;c:\j2sdk1.4.2_08\jre\bin;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    -> exe path = PATH=c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\JC00\j2ee\os_libs;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    [Thr 2144] JControlICheckProcessList: process dispatcher started (PID:1432)
    JStartupStartJLaunch: program = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[00] = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> arg[02] = -DSAPINFO=D01_00_server
    -> arg[03] = -file=E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> arg[04] = -nodeName=ID9391450
    -> arg[05] = -nodeId=1
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_5552
    -> arg[07] = -jvmOutFile=E:\usr\sap\D01\JC00\work\jvm_server0.out
    -> arg[08] = -stdOutFile=E:\usr\sap\D01\JC00\work\std_server0.out
    -> arg[09] = -locOutFile=E:\usr\sap\D01\JC00\work\dev_server0
    -> arg[10] = -mode=JCONTROL
    -> arg[11] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> lib path = PATH=c:\j2sdk1.4.2_08\jre\bin\server;c:\j2sdk1.4.2_08\jre\bin;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    -> exe path = PATH=c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\JC00\j2ee\os_libs;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    [Thr 2144] JControlICheckProcessList: process server0 started (PID:1436)
    JStartupStartJLaunch: program = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[00] = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> arg[02] = -DSAPINFO=D01_00_sdm
    -> arg[03] = -file=E:\usr\sap\D01\JC00\SDM\program\config\sdm_jstartup.properties
    -> arg[04] = -nodeName=sdm
    -> arg[05] = -nodeId=2
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_5552
    -> arg[07] = -jvmOutFile=E:\usr\sap\D01\JC00\work\jvm_sdm.out
    -> arg[08] = -stdOutFile=E:\usr\sap\D01\JC00\work\std_sdm.out
    -> arg[09] = -locOutFile=E:\usr\sap\D01\JC00\work\dev_sdm
    -> arg[10] = -mode=JCONTROL
    -> arg[11] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> lib path = PATH=c:\j2sdk1.4.2_08\jre\bin\server;c:\j2sdk1.4.2_08\jre\bin;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    -> exe path = PATH=c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\JC00\j2ee\os_libs;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    [Thr 2144] JControlICheckProcessList: process SDM started (PID:1452)
    [Thr 892] Mon Dec 19 11:15:35 2005
    [Thr 892] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 892] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 892] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 892] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 892] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 892] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 892] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 892] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 2144] Mon Dec 19 11:16:00 2005
    [Thr 2144] JControlICheckProcessList: process server0 (pid:1436) died (RUN-FLAG)
    [Thr 2144] JControlIResetProcess: reset process server0
    [Thr 2144] JControlIResetProcess: [server0] not running -> increase error count (1)
    JStartupStartJLaunch: program = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[00] = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> arg[02] = -DSAPINFO=D01_00_server
    -> arg[03] = -file=E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> arg[04] = -nodeName=ID9391450
    -> arg[05] = -nodeId=1
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_5552
    -> arg[07] = -jvmOutFile=E:\usr\sap\D01\JC00\work\jvm_server0.out
    -> arg[08] = -jvmOutMode=append
    -> arg[09] = -stdOutFile=E:\usr\sap\D01\JC00\work\std_server0.out
    -> arg[10] = -stdOutMode=append
    -> arg[11] = -traceMode=append
    -> arg[12] = -locOutFile=E:\usr\sap\D01\JC00\work\dev_server0
    -> arg[13] = -mode=JCONTROL
    -> arg[14] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> lib path = PATH=c:\j2sdk1.4.2_08\jre\bin\server;c:\j2sdk1.4.2_08\jre\bin;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    -> exe path = PATH=c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\JC00\j2ee\os_libs;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    [Thr 2144] JControlICheckProcessList: process server0 started (PID:4092)
    [Thr 2144] Mon Dec 19 11:16:40 2005
    [Thr 2144] JControlICheckProcessList: process server0 (pid:4092) died (RUN-FLAG)
    [Thr 2144] JControlIResetProcess: reset process server0
    [Thr 2144] JControlIResetProcess: [server0] not running -> increase error count (2)
    JStartupStartJLaunch: program = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[00] = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> arg[02] = -DSAPINFO=D01_00_server
    -> arg[03] = -file=E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> arg[04] = -nodeName=ID9391450
    -> arg[05] = -nodeId=1
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_5552
    -> arg[07] = -jvmOutFile=E:\usr\sap\D01\JC00\work\jvm_server0.out
    -> arg[08] = -jvmOutMode=append
    -> arg[09] = -stdOutFile=E:\usr\sap\D01\JC00\work\std_server0.out
    -> arg[10] = -stdOutMode=append
    -> arg[11] = -traceMode=append
    -> arg[12] = -locOutFile=E:\usr\sap\D01\JC00\work\dev_server0
    -> arg[13] = -mode=JCONTROL
    -> arg[14] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> lib path = PATH=c:\j2sdk1.4.2_08\jre\bin\server;c:\j2sdk1.4.2_08\jre\bin;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    -> exe path = PATH=c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\JC00\j2ee\os_libs;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    [Thr 2144] JControlICheckProcessList: process server0 started (PID:5456)
    [Thr 2144] Mon Dec 19 11:17:25 2005
    [Thr 2144] JControlICheckProcessList: process server0 (pid:5456) died (RUN-FLAG)
    [Thr 2144] JControlIResetProcess: reset process server0
    [Thr 2144] JControlIResetProcess: [server0] not running -> increase error count (3)
    JStartupStartJLaunch: program = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[00] = E:\usr\sap\D01\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> arg[02] = -DSAPINFO=D01_00_server
    -> arg[03] = -file=E:\usr\sap\D01\JC00\j2ee\cluster\instance.properties
    -> arg[04] = -nodeName=ID9391450
    -> arg[05] = -nodeId=1
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_5552
    -> arg[07] = -jvmOutFile=E:\usr\sap\D01\JC00\work\jvm_server0.out
    -> arg[08] = -jvmOutMode=append
    -> arg[09] = -stdOutFile=E:\usr\sap\D01\JC00\work\std_server0.out
    -> arg[10] = -stdOutMode=append
    -> arg[11] = -traceMode=append
    -> arg[12] = -locOutFile=E:\usr\sap\D01\JC00\work\dev_server0
    -> arg[13] = -mode=JCONTROL
    -> arg[14] = pf=E:\usr\sap\D01\SYS\profile\D01_JC00_portald
    -> lib path = PATH=c:\j2sdk1.4.2_08\jre\bin\server;c:\j2sdk1.4.2_08\jre\bin;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    -> exe path = PATH=c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\JC00\j2ee\os_libs;D:\oracle\D01\920\jre\1.4.2\bin\client;D:\oracle\D01\920\jre\1.4.2\bin;D:\oracle\D01\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\j2sdk1.4.2_08\bin;E:\usr\sap\D01\SCS01\exe;E:\usr\sap\D01\JC00\exe;E:\usr\sap\D01\SYS\exe\run
    [Thr 2144] JControlICheckProcessList: process server0 started (PID:4948)
    [Thr 2144] Mon Dec 19 11:18:10 2005
    [Thr 2144] JControlICheckProcessList: process server0 (pid:4948) died (RUN-FLAG)
    [Thr 2144] JControlIResetProcess: reset process server0
    [Thr 2144] JControlIResetProcess: [server0] not running -> increase error count (4)

    Dear Ashutosh,
    Thanks for guiding us to correct location.
    What we identified is we connected portal to the LDAP
    of EP 5.0 while migrating the content.After migration we
    have formatted the 5.0 system.
    Now that portal is connected to that LDAP which is
    not existing the problem is coming.
    Is there any way through CONFIGURATION tool I can remove
    that connectivity to LDAP?
    I am trying to configure LDAP again on the same server
    but before to that if some one can hint me how to
    remove the LDAP configuration from the Portal I would
    be very much thankful..
    regards
    Mrutyunjay

  • How can i receive the user name of the present operating system

    HI,all.
    how can i receive the user name of the present operating system from SAP.Have any funciton to use?Thankyou!

    use sy-uname system field.
    report ztest.
    write:sy-uname.
    thanks.
    reward if solved.

  • How can receive the user name of the present operating system

    HI,all.
        how can i receive the user name of the present operating system from SAP.Have any funciton to use?Thankyou!

    Hi hong,
    1. This FM BDL_SYSTEM_INFO
        will give operating system user of the database.
    regards,
    amit m.

  • Sun would like your help with the "System Name Already In Use"  error

    A couple of users have reported getting an erroneous "System Name Already in Use" error when re-registering a system after a fresh Solaris re-install. We'd like your help in tracking down this problem.
    The scenario is this:
    * Install Solaris 10 and register with updatemanager,
    * Wipe out the installation and re-install Solaris.
    * re-register with updatemanager.
    The system erroneously reports that the system name is already in use. It is supposed to detect a duplicate registration of the same system.
    We have not been able to reproduce this error in our lab.
    If this has happened to you, would you let us know at [email protected]?
    Here are the things that we would like to ask of you:
    * If you run "updatemanager -debug" if will create a log file /tmp/basicreg<timestamp>.log.
    * Details on the exact hardware you have (make/model/configuration).
    * Details on the steps you took to get to the bad state. REALLY detailed!
    Thanks!
    Based on what we know now, we believe you can work around the issue by either:
    * Changing the host name and re-registering.
    * Creating a different user account and registering the host to that account.
    Some previously-posted workarounds are known NOT to work:
    * Wait 24 hours and try again.
    * Do some "ccr" incantations and try again.

    Hi,
    Can you drop me an email as i am a sun employee and i will be able to check if the swup frontline team have received any support cases on this issue and then we can work with you directly to resolve the issue.
    Scott Wallace

  • The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed

    Friends,
                I'm facing below issue while accessing a crystal report. I heard it might be an access issue. But i'm able to access a report within a same folder.
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException : The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    Any suggestions would be very helpful.
    Thanks in Advance,
    Bharath

    Apply trace on RAS and look for errors in the RAS logs at the same timestamp.
    These errors come for various errors and tracing RAS would give us a better idea.
    It might hapen that you observe these errors for reports which takes more than the RAS timeout to export the reports.
    Post getting the RAS logs you can try below steps if we see timeout errors in RAS logs.
    Copy clientSDKOptions.xml file from <BO install path>\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\lib to the machine where your app is running Open clientSDKOptions.xml and change CORBARequestTimeOut from 600000 to a value large enough to allow the report to render, for instance 1200000. Default value is 600000 (10 minutes)
    Specify the location of the clientSDKOptions.xml file at run-time. In your JSP or Java files, use the Java method setProperty from the System class. Set the system property indicated by the ras.config key to the specified directory as: system.setProperty("ras.config","c:\temp"). This function call specifies that the clientSDKOptions.xml file in c:\temp is to be used for locating RAS servers.
    Thanks,
    Prithvi

  • "Conversion of Source System names after the transport" : O

    Experts:
    Environment : BI 7.0 and SP 12
    <b>Tranports related to transformation rules are failing with inactive status...</b>
    Further investigation on this, I have noticed that in our QA system, where "Conversion of Source System names after the transport" : O screen, we have columns
    Original Source System, Target Source System, 7.0, Description(I guess, since no name is found)
    Everything looks fine to me with reference to actual techinical names of source/target system...
    My question there is a check box on column "7.0", which is UNCHECKED. Is this correct?
    My understanding is that, this check box needs to be CHECKED, since this is related " Only Valid for RSDS, TRFN and DTPA Objects ". Is this correct?
    If yes, Can I check this box in QA system, save and retransport my requests. If so, what happens to standard BW objects i.e., transfer ruels, update rules etc...
    OR do i need to create another entry with same source/target system and check the 7.0 box.
    OR do i need to create 3 entries with same source/target system and check 7.0 box for each entry i.e., RSDS, TRFN, DTPA.
    Finally, please advise the exact steps that need to be taken here...pros and cons
    Your inputs will be of great help....
    Thanks,
    BI
    Message was edited by:
            B I

    Hi,
       Yes you need to check the checkbox as it is related to Data sources and transformation and DTPs. you can mark the check box if  your client is modifiable, if not you need to transport the setting from DEV. Go to
    SPRO > Business Intelligence>Transport Settings--> Change Source system name after transport.
    you also need to maintain the Source system IDs .
    Hope it helps.

  • I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

    I have a macbook pro core i7 mid 2012
    And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • I can't see the font names in the TYPE - Font pull down menu?

    I can't see the font names in the TYPE - Font pull down menu?  The fonts are in there, but I can only see the name as I scroll past each one - almost like they are white text???

    view,
    I believe this may solve it:
    Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
    It was first presented in this post #15 by TheUlser:
    https://forums.adobe.com/message/6854594#6854594
    It has been described on this Adobe page:
    http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/
    It may also depend on the monitor, as it appears from post #29 by Loncar in the same thread.
    Obviously, this also influences some other things so there may be a downside to it.

  • The item "(name of the song)" can't be replaced because it's invisible!!??!

    I'm hoping someone can help me with this issue.
    I've been backing up my song purchases to the time capsule but for some reason on half of my songs i get an error that says "*The item (name of the song) can't be replaced because its invisible*"
    never had this problem before until now... not sure how to fix it. i can play my songs no problem but when i try to copy a song to the time capsule i get that error message. HELP!

    The issue has nothing to do with your original files (I'm pretty sure) so the profession of being able to play the song in iTunes has nothing to do with it. The file that's "invisible" is not the original, but the copy that's already in the destination folder. OS X has LOTS of invisible files all over the place. Why didn't you know that before? They're invisible! Usually these are files the system needs for proper operation, but the user doesn't need to mess with (according to Apple!).
    Now, how did your destination folder wind up with an invisible file by the same name as the song file you're trying to copy? I don't know, but what it looks like to me is that standard opperating procedure for the OS is to begin its copying process by first creating an invisible file in the destination folder with the proper title, then begin actually copying data. For some reason that Apple needs to fix, sometimes when the OS goes to start actually copying data, it sees the invisible file it just created and says "Oops! there's already a file there by this title! I can't put another one there!" Normally, it would ask you, the user, if you wanted to replace the existing file, but the file is invisible and therefore cannot be replaced, so it just tells you that.
    What to do?
    I LOVE the widget available here: http://web.me.com/hansen.m/Site/Widgets.html One trip to the dashboard, click on "Show", and viola! you can see that pesky invisible file in your destination folder. Now you can delete it. Sometimes this works and a second attempt to copy the file works. More often I find that I have to copy to a different folder on the destination disk. After that I can move it to the preferred folder (copying from the local hard disk to some other location - I run into this when copying to my idisk - seems to be part of the problem.)
    In case that was about as clear as a toad's complexion, let me illustrate. I move files for sharing to my idisk every week. I click on a song and drag from iTunes, where I've already placed my recording, to a Finder window where idisk/Music/ReChording is already open, wait for the green circle with the white plus sign, and drop it. I get the message about not being able to replace. I access my dashboard and click "Show". Then I delete the now visible (grayed, but visible) offending file from my idisk. Then I click (in the Finder) on the idisk/Music folder, making it the destination. Then click on iTunes and drag the song to the idisk/Music folder. It copies. When it's done, I drag the file from idisk/Music to idisk/Music/ReChording. This copy has never given me a problem, and is nearly instantaneous, since no data needs to be copied.
    Download that widget. It's a lot less painful than other workarounds. But Apple needs to fix this.
    I hope that helps.

  • I have some loops from acid 5 which I have dragged in a folder to the loop browser.  Some of them retain the folder name in the View: and some don't.  I have had some that seem to go in but I can't find them.  Where should I look?

    I have some loops from acid 5 which I have dragged in a folder to the loop browser.  Some of them retain the folder name in the View: and some don't.  I have also had some that seem to go in but I can't find them.  If I try to add them again, I get a msg that they are already there.  Where should I look?

    It may be best to recreate the folder and the smart playlists from scratch.
    tt2

  • How can i get the System Time from the other host

    I want to get the System Time from the other host in the LAN,How can I get the Time using Java.
    Such as I am in WIN 2000 and I have a Unix host in LAN, I want to get unix host System time, How can I do it.

    Open a socket to port 13 and read a string with the time.
    -or-
    Open a socket to port 27 and read 4 bytes that are a network order timestamp
    Assuming that your UNIX machine has those services running, most do

  • When i do file, save for web, i get an error that says " the operation could not be completed. The system cannot find the path specified." What can fix this?

    when i finish a file and try to "save for web", i get an error box saying The operation cannot be completed. The system cannot find the path Specified.
    What can i do or where do i look?

    ELEMENTS 12 AND ELEMENTS 13
    Upgraded to 13 Thinking might resolve the issue.
    Was working fine up until we had "Tech" come in the office and "up grade some stuff"
    then all of a sudden i started getting this message, something happened but i don't have a clue what.

Maybe you are looking for

  • Keeps crashing after Yosemite install - Need thoughts on what to do...

    My 2013 Macbook Air keeps crashing after Yosemite install, time between crashes are more random than consistent and it can be anytginh from one hour to 6 hours between crashes. Enclosed the report below with the hope that someone has some tips on wha

  • Sold to party and Ship to party are the same but has different address

    Hi, I have problem here wherein Sales order has the same sold to party and ship to party but they have different address. When the customer master data is changed the sold to party in the sales order is also updated but the ship to party is not updat

  • Issue using web-service with forms9i

    using web-service with forms9i Hi I have a setup of oracle9ias release 2 on solaris machine. I have made a web-service which is deployed on nt machine on weblogic server. I have made a call from my form (forms9i) to this web-service. When i try to us

  • Solman_setup not calling and open browser

    Dear Experts, I recently upgrde my solution manager 7.1 sp11 . after upgrade I run transaction solman_setup , or LMDB etc ( which calling browser ) not open give me following error 500 SAP Internal Server Error ERROR: Access via 'NULL' object referen

  • ADOCE Object creation problem

    Hi, Using Oracle lite release 5.0.2 I did packaged the Transport tutorial and successfully deployed it to a Pocket PC. For this I followed the instructions listed in the Oracle Lite 9i Developers Guide for Windows CE. (All the s/w and h/w requirement