Can this HSRP work?

Hi,
Can this scenario work?
Assuming I have a flat network, a computer with 2 NICs and are connected to 2 different routers. I configure the routers to run HSRP between them. But the routers do not have any layer 2 or layer 3 interconnects between each other.
Can HSRP work this way?

Leo is correct in that HSRP won't actually be working do to the fact that it can't exchange hellos. Both routers will think that they are the primary.
If your looking at trying to get a redundant setup here is how you would have to set your equipment up. Router A would be connected to switch A which would be connected to switch B which would be connected to RTR B. Your computer with the two nics would then have one connected to switch A and one connected to Switch B
Patrick

Similar Messages

Can this phone work in Egypt???

The Phone Link??
http://www.bestbuy.com/site/Boost+Mobile+-+Samsung+Galaxy+S+II+4G+No-Contract+Mobile+Phone+-+White/6...
i wonder if it can work on vodafone or mobinil or any network in Egypt??
Thank u in advance

You'd have to cross reference the frequency bands with the carriers you mentioned. You can also contact them directly to verify if this phone works with their network.
Thanks!
Jesus|Senior Social Media Specialist | Best Buy® Corporate
Private Message

HT5246 Everyone has Java installed - how can this tool work?

Every Mac (and PC user for that matter) has Java installed. Even if you did not have it, Apple's last two updates installed new versions. How can this malware tool work? And why is it limited to Lion?
Apple - this is not what your customers rightly expect and could be crippling to your reputation.
Do this over and do it right. Thankyou.

Every Mac (and PC user for that matter) has Java installed.
That's incorrect.
How can this malware tool work?
By updating Java, if present, and removing the malware files, if present.
And why is it limited to Lion?
It isn't. There's a Java update for Mac OS X 10.6.8 that does the same things.

How can this pattern work? need help!!

the model i need have 3layers:JSP+EJB+SocketServer, i know EJB can act as Socket Client(not Server),but the
main problem is that i must use a .dll or .lib file(written in
c) in EJB to packge the socket data.someone says EJB
can use JNI while EJB Spec won't allow it, i dont't want
to take the risk also.Is there any other way can work?
(use runtime in EJB?)
if EJB can't work in this pattern,can i have another choice? (JSP and SocketServer can't be replaced)
NEED HELP!

Use the Mediator pattern.

Buddy list all gray--how can this not work??

I've got iChat 3.1.8 and only opened it when i got a little Logitec USB camera. Plugged everything in, set all the settings, and added my buddy (another Mac user). I could not initiate a video chat because my buddy list names and icons are all gray. There are NO green icons at all. But she said I showed up just fine in her buddy list, and when she initiated the chat it worked perfectly. We had a nice chat. But when we tried again from my end, still no color in my life.
The camera has worked fine since I plugged it in. I bought and installed iChatUSBCam v2.2.1, which allowed me to set a few more settings. Alas, nothing has changed.
I've read this question a few times on the board and--most frustrating--they all seem to say "Oh, it worked itself out." But mine isn't working itself out. Camera and microphone are enabled. No one is blocked. I'm lost.
ibook G4 Mac OS X (10.4.10)

Hi M Smith 1,
Welcome to the Apple Discussions
In System Preferences > Sharing > Firewall tab is the Firewall On ?
Have you set the iChat ports in a New options if it Is ?
Did those ports include 5190 on UDP ?
If Yes to these three question use the Advanced button.
Does this have the "Block UDP Traffic" item ticked ?
If so deselect it.
The iChat ports also need to be open in your modem and any separate router.
If Port Forwarding was used here it must point to the IP that your computer is getting or using. ( See System Preferences > Network > (Select connection method) > TCP/IP tab )
On some modems and or routers the forwarding or use of TCP and UDP protocols on port 5190 seems to cause a conflict.
iChat can have the login to AIM and text chatting moved to a different port.
iCHat > Preferences > Accounts
Select the AIM or @mac account on the left
Select the Server Settings tab
Whilst Logged out of AIM change the port to 443.
If all these do not work go to Users/(your Account)/Library/Preferences and delete com.apple.ichat.AIM.plist and restart ichat
10:55 AM Monday; July 23, 2007

Can this Printer Work

Hello;
I have a Power Mac G4 running OS 10.4.7
My Epson Photo 1280 works great, however I would also like to run my HP Laser Jet 4P. The Laser Jer 4P has the Centronics Type plug on the rear and also a what appears to be a female 9 pin serial connector. Is there anything I can buy to hook this Laser Jet 4P to a USB Port on the G4 ? Not looking for any fancy printing, just basics. I did go to the HP download site and down loaded the Driver
Ljlegacy-en.sit, but have no idea what to do with it now sitting on my desktop.
Thank You
Paul

Kappy;
I down loaded ' The Unarchiver'. It unzipped and then I ran the installer 'Ljlegacy-en.sit'
The installer started to search MAC HD80 and said there were 503 items to be installed.
Then up came the following msg;
"A File named 'current' on Mac HD80 has the same name as a file that needs to be installed"
Cancel to stop install or Delete to replace that folder
I aborted at that point. Can I replace that folder ? What if others such messages come up, can they be replaced also ?
Any other thing I may run into on installing the HP Laserjet 4P drivers ?
Thank You
Paul

Can this configuration work?

Hi,
I searched and could not find an answer on here, so here goes.
Just got a new LCD TV and BR DVD player, both from Samsung, both offer all sorts of streaming and internet.
However, to do all this wireless requires buying the Samsung Linkstick.
Now, my main router is an Apple Airport Extreme draft N. This router sites in a different part of the house from the TV and DVD.
Can I use an Apple Express to connect via Ethernet to the TV (or DVD) and then have the Express connect wireless to the Extreme, basically using the Express in the same way as the Samsung Linkstick?
(And yes, there is a reason I do not wish to buy and use the Linkstick...)
If the answer is NO, any ideas for alternatives?
Cheers,
Dorian

Open AirPort Utility and select the AirPort Extreme base station (AEBS).
Choose Manual Setup from the Base Station menu, or double-click the AEBS to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
Next, select the AirPort Express (AX) and choose Manual Setup from the Base Station menu, or double-click the AX to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
Enter the base station network and base station password is necessary.
Click Update to update the base station with new network settings.
This information is from Apple's "Designing AirPort Networks: Mac OS X v10.5 + Windows (direct PDF download link)".

[Solved] [Bash] How can this NOT work?!?!

###### Samsung NC10 Commandcenter ######
#!/bin/bash
command=""
act=""
args=0
param=$2
if [ $# -eq 2 ]; then
args=2
fi
add () {
if [ args!=2 ]; then
echo "What do you want to activate?"
echo -e "1) LAN\t2) WLAN\t3) Bluetooth"
read act
fi
if [ args=2 ]; then
act=$param
fi
case $act in
1)
echo "Activating LAN."
modprobe sky2;
/etc/rc.d/network start;
2)
echo "Activating WLAN."
modprobe ath5k;
/etc/rc.d/network start;
3)
echo "Activating Bluetooth."
modprobe btusb;
modprobe bluetooth;
echo "Invalid action '$act'!"
esac
remove () {
if [ args!=2 ]; then
echo "What do you want to inactivate?"
echo -e "1) LAN\t2) WLAN\t3) Bluetooth"
read act
fi
if [ args=2 ]; then
act=$param
fi
case $act in
1)
rmmod sky2;
/etc/rc.d/network stop;
2)
rmmod ath5k;
/etc/rc.d/network stop;
3)
rmmod btusb;
rmmod bluetooth;
echo "Invalid action '$act'!"
esac
cmd () {
if [ args!=2 ]; then
echo "What action do you want to perform?"
echo -e "1) Suspend(RAM)\t2) Hibernate(HDD)"
read act
fi
if [ args=2 ]; then
act=$param
fi
case $act in
1)
echo "Suspending to RAM."
pm-suspend;
2)
echo "Hibernating to HDD."
pm-hibernate;
echo "Invalid action '$act'!"
esac
if [ $# -ne 0 ]; then
case $1 in
add)
command=1
rm)
command=2
cmd)
command=3
command=$1
esac
fi
if [ $# -eq 0 ]; then
echo -e "Entering interactive mode. \nWhat task would you like to perform? \n1) Activate\t2) Inactivate\t3) Command"
read command
fi
case $command in
1)
add
2)
remove
3)
cmd
echo "Invalid parameter '$command'!"
esac
I'm trying to make a script to control the various functions of my awesome netbook, but even though my design is ingenious , it doesn't work. I've tried everything and I just don't see why it can't work.
If you start it without arguments, it will ask interactively for the arguments and it works. It works if you pass the first argument, it asks you straight for the second one.
But it doesn't work if you give both arguments directly. I've tried pretty much everything and I'm about to start punching in walls.
It's my first real bash script though...
Last edited by initbox (2009-03-08 16:00:20)

Now it works!
All I had to do was add $ in the if-variables and add spaces into the if-conditions.
Thanks guys.
Use it if you find it useful, don't care about credits or w/e.
Finished script:
#!/bin/bash
###### Samsung NC10 Commandcenter ######
command=""
act=""
args=0
param=$2
if [ $# -eq 2 ]; then
args=2
fi
add () {
if [ $args -ne 2 ]; then
echo "What do you want to activate?"
echo -e "1) LAN\t2) WLAN\t3) Bluetooth"
read act
fi
if [ $args = 2 ]; then
act=$param
fi
case $act in
1|lan)
echo "Activating LAN."
modprobe sky2;
/etc/rc.d/network start;
2|wlan)
echo "Activating WLAN."
modprobe ath5k;
/etc/rc.d/network start;
3|bt)
echo "Activating Bluetooth."
modprobe btusb;
modprobe bluetooth;
echo "Invalid action '$act'!"
esac
remove () {
if [ $args -ne 2 ]; then
echo "What do you want to inactivate?"
echo -e "1) LAN\t2) WLAN\t3) Bluetooth"
read act
fi
if [ $args = 2 ]; then
act=$param
fi
case $act in
1|lan)
/etc/rc.d/network stop;
rmmod sky2;
2)
/etc/rc.d/network stop;
rmmod ath5k;
3)
rmmod btusb;
rmmod bluetooth;
echo "Invalid action '$act'!"
esac
cmd () {
if [ $args -ne 2 ]; then
echo "What action do you want to perform?"
echo -e "1) Suspend(RAM)\t2) Hibernate(HDD)"
read act
fi
if [ $args = 2 ]; then
act=$param
fi
case $act in
1)
echo "Suspending to RAM."
pm-suspend;
2)
echo "Hibernating to HDD."
pm-hibernate;
echo "Invalid action '$act'!"
esac
if [ $# -ne 0 ]; then
case $1 in
add)
command=1
rm)
command=2
cmd)
command=3
command=$1
esac
fi
if [ $# -eq 0 ]; then
echo -e "Entering interactive mode. \nWhat task would you like to perform? \n1) Activate\t2) Inactivate\t3) Command"
read command
fi
case $command in
1)
add
2)
remove
3)
cmd
echo "Invalid parameter '$command'!"
esac
Last edited by initbox (2009-03-14 12:12:26)

Can this phone work in Singapore?

Hello. I am from the United States, and have Sprint as my carrier. I am currently living in Singapore for the next few months though. I have been looking at the Palm Pre, and really want to get one. Is there any way I can purchase one here, use it in Singapore, and then be able to use it with Sprint when I get home? I mean of course without purchasing a Sprint plan and then having to pay over a dollar a minutes for calls. Thanks!
Post relates to: Pre p100eww (Sprint)

At this time the PRE is not available in Asia. You will need to check the Palm website for Singapore for any release information.
It sounds like you are wanting an unlocked GSM version of the PRE which is not available at this time.
You will need to check the Palm website for any release information. http://www.palm.com/us/index.html

Can this ram work on i7205 MSI GNB MAX?

http://www.twinmos.com/dram/dram_p_sp_ddr400.htm
Can I use that RAM on my mobo. The mobo is 2.5v max I think.

it might work but would only run at pc 2100 speeds
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=387
• Support Dual channel DDR266 memory interface. Each channel supports 2 DIMM Sockets.
• Support four 184-pin DDR DIMM sockets up to 4GB.
• Support non-ECC(x64) or ECC(x72) DIMMs DDR PC2001 DIMM using 128Mb, 256Mb,
512Mb and 1GB SDRAM

Can this query work?

I'm having trouble with a query because I need the Count results in the query below to refer only to the current column of the SQL Report:
select T1.id,
T1.name,
(select count(*) from T1 where typeid = 222
AND id = # T1.id#) "COUNT 1",
(select count(*) from T1 where typeid = 262
AND id = # T1.id#) "COUNT 2"
from T1
order by T1.name
Is this possible to do? If I substitute an actual ID instead of the #T1.id#, it returns the results that I want.
Thanks much,
Nora

Try this -
select
a.id,
a.name,
(select count(*) from t1 b where b.typeid = 222 and b.id = a.id) 'COUNT 1',
(select count(*) from t1 b where b.typeid = 262 and b.id = a.id) 'COUNT 2',
from
t1 a
order by a.nameWithout more details about what you're trying to achieve it's hard to suggest (better) alternatives

MSI GT70 laptop - can this laptop work with 3D games and movies?

I don't see it indicated anywhere but I was wondering if this was possible..

It should, but not on his own screen, but extent to addiction 3D capable display.
http://www.techjailbreak.com/msi-gt70-0ne-255fr-gaming-laptop-complete-review-and-specs/
Quote
Finally, note that the GTX 680M is compatible with all technologies Nvidia (PhysX, Optimus, etc..) but some of them (such as 3D Vision) cannot be used on the machine, for lack of suitable 3D display. However, if you have the glasses and a 3D Vision screen, nothing prevents you from connecting the MSI GT70 via HDMI and 3D gaming (720p only).

HT6114 Can this update work for a iMac G4?

I have an iMac G4 but for some reason when i open itunes it says quicktime 7.5.5 or later must be installed. once i install the latest version of qicktime, itunes still will not open. i check my computer for updates but it says its up to date with OS X 10.5.

10.5? The stable release is 10.5.8
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update

Can this replacement program work in the philippines?

I'm paolo from philippines and my cousin packaged me an ipod nano (1st gen) and I just found that there is this replacement program for those ipod nano (1st gen) w/ battery issue. So, can this program work here in my country? thanks

You will need to call them: http://support.apple.com/kb/he57

TS4006 can this find my iPhone app work if you are not connected to cellular data network and wifi

can this app work without cellular data network and wifi, if yes then how exactly this work ?

To use Find my iPhone you have to set it up on your iOS device before you lose it. Your device also needs to have iOS 5, be switched on and connected to wi-fi/3G.

Can this HSRP work?

Similar Messages

Maybe you are looking for