Can we achieve SSO in the SAP Portal without a third party tool

Can we achieve SSO in the SAP Portal without a third party such as Netegrity?

Kirk,
Sorry I misunderstood what you were trying to setup.
If you want to connect the Portal to a Non-SAP Application then I believe that you would need to use a third party tool like Netegrity Siteminder.
We have a portal that is protected by Siteminder and then we have a .NET application that is also protected by Siteminder and SSO is setup between the two since Siteminder is used.
Hope that helps,
Keith

Similar Messages

How to display the archive link image in third party tool TSLImage viewer.

Currently in our workflow scenario we are displaying the archivelink image in objects & Attachment, using SAP document viewer. But the new requirement is, the attachment in workitem should be displayed using a thrid pary tool, EASY TSL IMAGE VIEWER. I have maintained the ARCHIVELINK Basic setting(OAG1), Call Internet Browser.
The viewing of the document MUST use the TSLImageViewer web application which is hosted on rte-ben-ez2 for the test system u2013 NOT the SAP web document viewer. I think there must be an option in SAP Workflow that specifies that the standard OLE viewing is used for the work item attachments rather than the EDM viewing that I am getting.
The authorising of the document MUST use the TSLImageAuth web application which is also hosted on rte-ben-ez2 for the test
system. The url that are putting into the email needs to have this format:
http://rte-ben-ez2/TSLImageAuth?docid=$(%23SAPLEVEL1)\ECC6ARC1\00000153.001&logarch=E1.
E1 is the content repository used for displaying.
Can anybody tell me in further workflow settings where to mention the viewer settings as use thrid party viewer.
Thanks in advance
Shivani
Edited by: shivani kolluru on Sep 27, 2008 12:33 PM
Edited by: shivani kolluru on Sep 27, 2008 12:36 PM

hey
i need to display the an image.
I am using apache commons codec for encoding and decoding.
I have base64 encoded image data, i am decoding this and trying to create an image icon object by passing decoded byte array.
That encoded and decoded byte array is BMP formatted data.
or Is it possible to convert BMP data to any other format like png, jpg ....
thanks

How to Retrive data Form Third party tool & up lode in SAP

HI Friends,
My client was implementing sap & parlay .NET for HR module .
my client requirement was what ever amount he payed for Employees that should also uplode in sap.
In SAP he is treating employee as Vendor .
so please guide me how can I Retrive data from third party tool & how can i uploaded in sap .
Regards,
Reddy

Hi,
Third Party Tool must be having some features of downloading data in a format like Excel.
In SAP Side, this File is going to be your input...Now you can try different options:
1) Identify the IDOC that serves your purpose and populate the idoc and fire an Inbound IDOC.
2) Run a BDC for your relevant Txn Code by uploading the Third Party generated Excel data into an internal Table.
3) Use an Standard BAPI to upload data into SAP.
4) If possible, Use an SAP Provided Direct Input program to pump data in SAP.
You need to give the expected format of Excel to the Third Party user generating the Excel for you.

Accessing SAP BW from a Third party reporting Tool.

Hi,
We are trying to acess SAP BW using a third party tool for reporting purpose.
We need a url to access SAP BW (something like http://host:13080/sap/bw/xml/soap/xmla
SAP BW should have fully functional Web services interface (XMLA Standard protocols)).
Presently our SAP BW has only ABAP Stack installed and no Java Stack.
To get a URL as mentioned above do we need a Java Stack to be installed?
I am not a SAP developer and hence need a confirmation on the above question.
Some documentation associated would also be usefull.
Thanks and regards

Thanks for the response
May be you are telling abt SAP GUI
the url for it is like
http://<fully_qualified_hostname>:<http_port>/sap/bc/gui/sap/its/webgui/!
But I need to use that URL to connect to SAP BW which needs some XMLA protocol.
Any suggestions on same..
Thanks and regards

SSO from Non-SAP portal to EP

Hi.
We need SSO from Non-SAP portal to EP.
The Non-SAP Portal has publish Form-based authentification.
I mean userid&password set to URL.
Then the EP can generate SAP Logon ticket to backend system?
regards,

How to Enable Single Sign-on with Non-SAP Web Application
I have very good material coollected for the same implement this.
http://help.sap.com/saphelp_nw04/helpdata/en/12/9f244183bb8639e10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a7b5ba90-0201-0010-4dbc-8f999dcd2798
Cheers!!
SJ.

BO SSO with the SAP front end tool

Hi ,
I am trying to go with SSO in the BO 3.0 version but i an facing an error when i am trying to create the ticket .... i am pasting the error and the architecture of the process kindly help me in this issue....
Please can we have SSO setup in the following envioronments and applications
BO Systems : B0S/B0D/B0Q/B0P
EP Systems: S0E/D0E/Q0E/P0E
Applications: InfoViewApp /CmcApp
This is required for complete implementation of Business Objects security model because SAP users do not have passwords
Problem Description: (Precise description of problem)
Setup SSO in the following environments and applications :
BO Systems : B0S/B0D/B0Q/B0P
EP Systems: S0E/D0E/Q0E/P0E
Applications: InfoViewApp /CmcApp
This is required for complete implementation of Business Objects security model because SAP users do not have passwords
Analysis:
SAP side u2013 items already complete:
- on the SAP side the portal needs to generate tickets for the BI system
- the BI system needs to trust the Portal
- the BI system needs to accept SSO tickets
- all the machines need to be in the same domain
Installation of the complete items can be confirmed by the presents of portal login ticket at these addresses :
Several issues needs to be checked in the Business Objects environment:
- the SAP authentication needs to be configured for the SAP system
- the web.xml for InfoView needs to use secSAPR3 as default setting for the authentication
- the default system in the SAP authentication options should be configured to use your SAP BI system
- the Business Objects system needs to be in the same domain
Analysis of authorization requirements (Mandatory for programs and tables):
Solution: (Final solution)
To complete the SSO implementation in the SAP BO environment, these issues should be completed:
1): Test that the SAP portals actually accepts portal login tickets:
https://epproduction-app.statoil.no/irj/portal
https://epquality-app.statoil.no/irj/portal
https://epdevelopment-app.statoil.no/irj/portal
https://epsandbox-app.statoil.no:56201/irj/portal
2): Implement and test the following items:
- the SAP authentication needs to be configured for the SAP system
- the web.xml for InfoView needs to use secSAPR3 as default setting for the authentication
- the default system in the SAP authentication options should be configured to use your SAP BI system
- the Business Objects system needs to be in the same domain
3): Check that fully qualified URLu2019s for BO systems calls the sso login:
- This also should be tested and confirmed working by the basis team (EDB) before the task is completed
- Comparison with production setup today is required
- Fully operational SSO setup in Prod can be found at: http://boxi.statoil.no:8080/InfoViewApp/logon.jsp
Tomcat implementation
SSO setup implicates these reconfiguration elements:
-     Update of web.xml for InfoViewApp and CmcApp in Tomcat :
This is the correct web.xml setup for SSO (gathered from prod env.):
    
    
    <context-param>
        <param-name>cms.visible</param-name>
        <param-value>true</param-value>
    </context-param>
    
    
    <context-param>
        <param-name>authentication.default</param-name>
        <param-value>secSAPR3</param-value>
    </context-param>
    
    
    <context-param>
        <param-name>authentication.visible</param-name>
        <param-value>true</param-value>
    </context-param>
    
    <context-param>
        <param-name>homepage.default</param-name>
        <param-value>/jsp/listing/home.jsp</param-value>
    </context-param>
    
    <context-param>
        <param-name>disable.locale.preference</param-name>
        <param-value>false</param-value>
    </context-param>
    
    <context-param>
        <param-name>siteminder.enabled</param-name>
        <param-value>false</param-value>
    </context-param>
    
    
    <context-param>
        <param-name>siteminder.authentication</param-name>
        <param-value>secLDAP</param-value>
    </context-param>
    
    <context-param>
        <param-name>vintela.enabled</param-name>
        <param-value>false</param-value>
    </context-param>
    
    <context-param>
        <param-name>sso.enabled</param-name>
        <param-value>true</param-value>
    </context-param>
    
    <context-param>
        <param-name>logontoken.enabled</param-name>
        <param-value>true</param-value>
    </context-param>
    
    <context-param>
        <param-name>persistentcookies.enabled</param-name>
        <param-value>true</param-value>
    </context-param>
Kerberos setup:
Please see separate attached document in C148946.
Implementation plan
1)    Implement SSO on Sandbox server st-tw283, and test in cooperation with Migration BO project and Solution Responsible
2)    Implement SSO on Dev server st-w1024, and test in cooperation with Migration BO project and Solution Responsible
3)    Implement SSO on clustered servers Q server st-w1023 and Sanbox server st-tw63, and test in cooperation with Migration BO project and Solution Responsible
4)    When approved by test group, finish test approval doc and prepare for production environment implementation
can any one guide me in this since this is critical and if any documents are there pls. forward me i will check them
Thanks & Regards
Sanjeevkumar.D.Belagal
09900084312

Hi Sanjeev,
It is kind of very hard to go through all the details you have written.
You have BO 3.0 and SAP in Back End.
First you have to install BOBJ
Then install Integration Kit.
Then you have to take some steps in SAP BI side such as creating RFC.
Then you will import your roles into BOBJ by going to CMC.
After that one you will be able to attain SSO.
Have you done all? If yes then exactly what error or issue you are getting? Be brief please.
When you mention any problem mention following.
What version you have?
What is in the back end?
What service Pack and Fix Pack you installed?
What environment you have?
What error you are getting and on which step?
Regards,
Bashir Awan

How to configure GB P60s in the SAP Portal?

How to configure GB P60s in the SAP Portal, so that they can be viewed and printed/reprinted by the employee themeselves? Will HMRC accept P60s printed on any stationeries? Also, Client does not want employee address to be available in the address section, but just the office location.

Hello
Please refer SAP note 1542870 -Electronic P60 ,where HMRC have given employers the option of providing an electronic P60 to their employees.
Please let us know incase you know any further information.
Thanks and Kind Regards
Ramana

TIME on ESS/MSS with the SAP Portal, release ERP2005 ECC6.

Hello,
I need to implement TIME (Leave request) on ESS/MSS with the SAP Portal, release ERP2005 ECC6.
Any informations about the customizing for a proof of concept would be appreciated.
All the back-end (R/3) as allready been customized.
Thanks for your responses.
Olivier

Hello,
If you already have all the templates and such configured then its easy. We don't have ESS and only one MSS scenario. However we support the web environment via BSP HAP_DOCUMENT. You can include our list pages in an Iview and assign that to the ESS or MSS scenario in the portal.
They also run stand alone, so you can test it as well without configuring the portal.
See also <a href="/people/sap.user72/blog/2007/02/20/objective-setting-appraisals-the-web-environment bloggy</a> on OSA and the web Environment, especially the last part will be of interest for you.
Regards and Groetjes,
Maurice

Can any one explain about the SAP Testing process in Implementation Project

Can any one explain about the SAP Testing process to be carried out by BW Consultant in an Implementation Project which is in Testing Phase..

hi bharat,
Two types of testing is possible in bw
unit testing
integration testing
Integration testing - It is the phase of software testing in which individual software modules are combined and tested as a group. It follows unit testing and precedes system testing.
Integration testing takes as its input modules that have been checked out by unit testing, groups them in larger aggregates, applies tests defined in an Integration test plan to those aggregates, and delivers as its output the integrated system ready for system testing.
Unit testing - One part or the whole part of transfer rules , update rules, etc..
Integration testing - The whole data flow cycle to be tested
This link will give u detailed description
http://en.wikipedia.org/wiki/Software_testing
Stress testing in BI..
/people/mike.curl/blog/2006/12/05/how-to-stress-test-bw-the-easy-way
REFER THIS REG CATT
http://help.sap.com/saphelp_erp2005/helpdata/en/d7/e21221408e11d1896b0000e8322d00/frameset.htm
Check this doc on Unit Testing
unit testing
Look at the threads below :
Testing Methods in BW
Unit Testing in BW
How to do testing in BW
Hi...BW testing
Re: Hi...BW testing
Hi...BW testing
Pls refer following links...
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e210c8408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3c/aba235413911d1893d0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/721d6a73-0901-0010-47b3-9756a0a7ff51
https://service.sap.com/upgrade-bw
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7dc0cc90-0201-0010-4fa7-d557f2bd65ef .
https://websmp204.sap-ag.de/~sapdownload/011000358700009385902004E
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67acb63d-0401-0010-b685-b1b87dd78892
Hope it helps you!
****Assign Points If Helpful****
Regards,
yunus

Import and export MDM with the SAP Portal

Hi,
Would you have any clue on how to handle import and export from the SAP portal ?
I need your help because I haven't found any standard iView to perform these functions
The only information i got were some explanations on WebDynpro Java iViews using events to export from the Portal.
Thank you in advance

Hi,
MDM iViews are only meant to perform MDM Data Manager operations but on limited basis. EP-MDM scenario has been designed for end users only which should not allow to perform complex data manager operations and they need not install MDM Clients.
Thats why importing and exporting functionalities are not possible in standard MDM iviews.
Regards,
Jitesh Talreja

Configuring the POS in ECC w/o having any third party tool and SAP IS Retai

Hi All,
I would like to know whether is there any way of configuring the POS in ECC without having any third party tool and SAP IS Retail.
Becuse client can't efford to invest for the sake of small functionality like just sales and service at his compay owned outlets.
Hope the query is clear to you all.
Best regards,
sushil kumar

Hi Guru's
I am closing this thread due to no reply nor solutions from the forum
Thanks for your time
Regards,
sushil

My original page is no longer tabbed, and when opening a new tab, I can't go back to the original page without closing all of the tabs.

In the past, if I didn't have all of the tabs opened, or just opened a new window, the page would still be in a tab if I opened up new tabs. Now, if I hit the "+", I get a tab. I can't get back to the original page without closing all of the tabs.
Example: I open ebay.com in a window. I hit "+" and go to cnn.com. I want to go back to what I was viewing on ebay, and I can't see it, unless I close the cnn window.

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Options window - Tabs panel
* https://support.mozilla.com/en-US/kb/Options%20window%20-%20Tabs%20panel
* DO NOT SELECT '''When I open a link in a new tab, switch to it immediately'''
Check and tell if its working.

When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded?

When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded

many thanks.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the

After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the data or any possible way? Money is not a limitation to this fix. Please help!!!

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?
its linksys3500 router and i login as admin using the gateway address in address bar..
i want to access the c drive of my colleague in same subnet in same office and i know his ip address.but he not configured telnet accept request.so without it how can i open his telnet port and access him

Duplicate post.

Can we achieve SSO in the SAP Portal without a third party tool

Similar Messages

Maybe you are looking for