Can we create a UICommand which refers to a Dnpage or APC????

Hi All,
Can we create a UICommand which refers to a dynpage or AbstractPortalComponent(APC)?? [say, when the user clicks UIcommand .. it should trigger a Dynpage or APC and show the user a UI] .. is this possible ??
Also, I want to access this UICommand as a MenuItem..
Please help ..! am eagerly looking forward for any help/idea/suggestion!!!!!!
have a good day!
Regards,
SK.

Hi,
Hozy wrote:
Frank, thanks for helping me out.
What you are suggesting is that I should recreate the view XVIEW which does union all (as the rows will be unique) of the 50 tables, however performance will be an issue unless I can create a materialized views.
What I know of materialized views is that it's used for static, pre-computed type of data. A materialized view is pre-computed; that's what makes it faster. The time and effort spent in doing the UNION is shifted from the time when you do the queries to the time when you refresh the materialized view. Whether that is more or less total time depends on how often you query the view, and how often you refresh it. At any rate, the performance when you do the queries will be as good as possible.
Materialized views ar often used in data wharehouses, where then data may only change once a month, but they are also often used in situations like yours, where the data changes every day, or even more frequently.
In my case, the data in few of the 50 tables might change once every 24hrs and it all comes at one time. The queries that hit XVIEW should get the latest data. Is there a way I can define a materialized view which will pick up the new data in the base 50 tables?I see; you have some job that runs at, say, 2:00 am every morning, and changes some, or maybe all, of the 50 tables. You might refresh the materialized view at, say, 4:00 am every day, or at some time when you're sure that the changes to the base tables are complete. Any query that uses the materialized view between 2:00 and 4:00 am will get stale data.
You could, alternatively, make the materilaized view refresh whenever any of the base tables change, but this uses more resources, including your time and effort setting it up.

Similar Messages

How can I create Object Tag which supports Sun and MS JVM both.

Hi,
I have created object tag as shown below
<object classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
name = "TestApplet" height="0" width="0" >
<param name="code" value="com.apps.TestApplet.class" />
<param name="codebase" value="codes" />
<param name="archive" value="TestApplet.jar" />
</object>
The above tag is working fine with the below JVM combinations in Windows XP.
1) Only Sun JVM
2) Only MS JVM
3) Sun JVM & MS JVM
But these conditions are not working with Windows 2000.
How we can create object tag which will support for these two opertating systems?

I am not able to understand the problem. From my understanding, you have an applet which you are trying to display in a browser using <object> tag. If that is the correct then all it matters is the browser and the JRE�
For example the below code when put in a JSP or a HTML, will use JRE 1.6.0_01 that is available on the client machine. If that is not available on the client machine then it will try and download automatically in IE.
This below code is for IE� if you are using Mozilla Firefox then you need to change the �classid� attribute to �java: com.foo.bar.ui.MyClass�
<OBJECT ID="Gantt" classid = "clsid:CAFEEFAC-0016-0000-0001-ABCDEFFEDCBA"
              codebase = "http://java.sun.com/update/1.6.0/jinstall-6u1-windows-i586.cab"
              WIDTH = "980" HEIGHT = "495" ALIGN = "baseline">
               <PARAM NAME="cache_option" VALUE="Plugin">
              <PARAM NAME ="CODE" VALUE = "com.foo.bar.ui.MyClass" >
              <PARAM NAME="MAYSCRIPT" VALUE="true">
              <PARAM NAME ="cache_archive" VALUE = "Myjar.jar /" >
              <PARAM NAME = "type" VALUE = "application/x-java-applet;jpi-version=1.6.0">
              <PARAM NAME = "scriptable" VALUE = "false">
              <strong>
                 This browser does not have a Java 1.6.0_01 Plug-in.
                 <br />
                 <a href="http://java.sun.com/update/1.6.0/jinstall-6u1-windows-i586.cab">
                   Get the latest Java Plug-in here.
                 </a>
          </strong>
        </OBJECT>

Can i create a function which can take infinite parameter.

Can i make a function which get infinite parameter.
like avg.

Kamran Riaz wrote:
Can i make a function which get infinite parameter.
like avg.I think you'll have trouble finding anything to take infinite parameters cos that would be bigger than the universe itself.
User defined aggregate functions example...
http://asktom.oracle.com/pls/asktom/f?p=100:11:335287534824285::::P11_QUESTION_ID:229614022562
[email protected]> create or replace type StringAggType as object
2 (
3     theString varchar2(4000),
4
5     static function
6          ODCIAggregateInitialize(sctx IN OUT StringAggType )
7          return number,
8
9     member function
10          ODCIAggregateIterate(self IN OUT StringAggType ,
11                               value IN varchar2 )
12          return number,
13
14     member function
15          ODCIAggregateTerminate(self IN StringAggType,
16                                 returnValue OUT varchar2,
17                                 flags IN number)
18          return number,
19
20     member function
21          ODCIAggregateMerge(self IN OUT StringAggType,
22                             ctx2 IN StringAggType)
23          return number
24 );
25 /
Type created.
[email protected]>
[email protected]> create or replace type body StringAggType
2 is
3
4 static function ODCIAggregateInitialize(sctx IN OUT StringAggType)
5 return number
6 is
7 begin
8      sctx := StringAggType( null );
9      return ODCIConst.Success;
10 end;
11
12 member function ODCIAggregateIterate(self IN OUT StringAggType,
13                                       value IN varchar2 )
14 return number
15 is
16 begin
17      self.theString := self.theString || ',' || value;
18      return ODCIConst.Success;
19 end;
20
21 member function ODCIAggregateTerminate(self IN StringAggType,
22                                         returnValue OUT varchar2,
23                                         flags IN number)
24 return number
25 is
26 begin
27      returnValue := rtrim( ltrim( self.theString, ',' ), ',' );
28      return ODCIConst.Success;
29 end;
30
31 member function ODCIAggregateMerge(self IN OUT StringAggType,
32                                     ctx2 IN StringAggType)
33 return number
34 is
35 begin
36      self.theString := self.theString || ',' || ctx2.theString;
37      return ODCIConst.Success;
38 end;
39
40
41 end;
42 /
Type body created.
[email protected]>
[email protected]> CREATE or replace
2 FUNCTION stringAgg(input varchar2 )
3 RETURN varchar2
4 PARALLEL_ENABLE AGGREGATE USING StringAggType;
5 /
Function created.
[email protected]>
[email protected]> column enames format a30
[email protected]> select deptno, stringAgg(ename) enames
2    from emp
3   group by deptno
4 /
    DEPTNO ENAMES
        10 CLARK,KING,MILLER
        20 SMITH,FORD,ADAMS,SCOTT,JONES
        30 ALLEN,BLAKE,MARTIN,TURNER,JAME
           S,WARD
[email protected]>

Can you create a webform which combines a check box list with a text field?

In Business Catalyst I'm looking to create a question and answer web form where visitors to the site fill out a choice or choose other and fill in a text field. See sample below...
Has anyone got any suggestions on how this could be done?
The question would be as follows...
Do you live in the area?
_ Yes
_ Cottager
_ Visiting
_ Other Location _____________

Liam,
Thanks for your response, now I'm finding out from the client that this is really an anonymous survey that they want to put on the site. They have been using an online survey but it keeps asking people to join by email. They are getting complaints about that so they want to find another way.
I've tried to make the form anonymous but I can't remove the email field. Can this be hidden so it doesn't show. Or is there another way to do this?
I'm not able to code javascript and there are other questions which are similar to the sample I gave which require a text field as well as check boxes.

How can i create a table which name is dynamic and not static?

i have a question to ask. normaly if i want to create a table, i must provid a name for the table. for example, create table tt (id number(5)). But now in my application, I need to control the table name with params through function, how can i do?
thx

First thank you to reply so fast!
But I met problem according to your instructive. The following is my code:
declare
m varchar(5);
begin
m:='hello';
execute immediate 'create table'|| m ||'(id number(5),name varchar(5))';
commit;
end;
The SQL*Plus tell me the command create is invalid. My oracle is 8.1.7.0.0. Maybe I miss something so that I can not get correct result. Wish your further help.
yours sincerely
zhou jinguang

How can I create a form which accepts answers in 2 different languages?

Hi,
I'm trying to create a form where the users can answer either in English or Hebrew (with the ability to answer some of the questions in Hebrew and some in English)
Currently on the form options it's set for English language (Didn't see an Hebrew option there) and when I test the form I get this error for the fields I try and fill in Hebrew: "The field contains unsupported characters. Please modify your entry."
Is there a way to allow both languages to be inputted into the fields?
Thanks

Just use Swing.
You can integrate Swing and Java3D.

How i can to create a vi, which read from configuration file and i could modify this indicator and save the config data??

Hi guys,
I have in my application a subvi which i use to save the configuration of application. I create one file with the last saved configuration, and i would like to open this values and that i could to modify this indicator value, but i cant since to modify i need 'numeric control' and to read the data from file i need 'numeric indicator '...
I thought, use a numeric control and use the values from file to the default values, but i didnt get to find the property node to adjust it. is it possible? or any different way to get it....??
Also, i attached the capture file.. i would like the program DOESNT SHOW the question of
replace the file!!. i would like directly replace the file when i push save.
Thanks, i attached the vi.
Attachments:
options.vi ‏43 KB
config.cnf ‏1 KB
capture.GIF ‏43 KB

Hi Dennis,
Your 'write to sreadshhet mod' suprime the dialog of replace file or not!, i want when i push save, it show the dialog input name of file and show the default sim000 but when i push this sim000 and this file already exist, then show the dialog to replace or not, if i replace Ok not problem, but when i push cancel replace it shows error eof!!!.
Your file, only remove this dialog and only replace the file directly.
i put the capture, when i choose the file to save and the program say to me this file exist and it give me the option of replace or not,i want when i push cancel replace it continues running without get error.
is it possible?.
Thanks.
Regards, Fonsi.
Attachments:
capture.GIF ‏71 KB
example.vi ‏40 KB

How can I create icloud account which I tried and it has showing the message that multiple free accounts have been activated on this device how should I install icloud and I got from apple support if you have mac then create a new icloud account but I don

How will have an option to create an icloud id

Hello there, vishal274.
The following Knowledge Base article provides a great FAQ that provides some great answers to some of the more common questions about iCloud, including yours:
Creating an iCloud account: Frequently Asked Questions
http://support.apple.com/kb/ht4436
How do I sign up for iCloud?
You can sign up for iCloud on an iPhone, iPad, or iPod touch with iOS 5 or later, or through System Preferences on a Mac with OS X Lion v10.7.4 or later. Just follow the setup instructions for your iOS device or Mac.
You may need to verify the email address that you use for your Apple ID. See Frequently Asked Questions About Apple ID for more information.
I had a free Find My iPhone account. How do I sign up for iCloud?
Update the devices that you use with Find My iPhone to iOS 5 (iOS 6 recommended). When you're asked to enter an Apple ID during setup, enter the Apple ID you were using for Free Find My iPhone. Your account will be automatically updated to iCloud.
I had a MobileMe account. How do I sign up for iCloud?
To use your MobileMe account for iCloud, follow the iCloud setup instructions and enter your @me.com or @mac.com email address as your Apple ID. If you had an @me.com address, it will be reactivated for email when you sign up for iCloud. If you had an @mac.com address, it won't be reactivated for email, but you can set up a new @icloud.com email address to use with iCloud.
Important: You will need a verified email address associated with your @me.com or @mac.com Apple ID to set up iCloud. To add a verified email address, go to My Apple ID (appleid.apple.com), sign in with your @me.com or @mac.com email address, and add a valid email address to your account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Can I create a list which counts the number of documents of a specific metadata type by the folder they are stored within?

Running SP2013 Foundation. My users interact by uploading documents to personal folders within a document library, selecting the type of document they have uploaded via a lookup column and SP list. I have two levels of view in my library, a top level view
and an in-folder view which contains the metadata and standard document information like version and modified date etc.
Currently I am able to count the total number of documents that have been uploaded of a particular document type against my document type list, but I would also like to include folder along with document type to thoroughly track document returns by folder
name. The desired output being a list with a count of document type uploaded by folder name.
I have tried creating an associated user column at the top level view and also uploading an associated user and folder name list.
Is this possible and how would I go about this?
Many thanks for any assistance

Hello MJH9J,
Thank you for your question.
We are currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Best Regards,
Zhengyu Guo
Zhengyu Guo
TechNet Community Support

Using Final Cut Pro, can we create a subtitle which can be used in other applications?

Can a subtitle file be created using FCP and later use in other application?

Ian R. Brown wrote:
You can create a title and export it as a video file to be used in any editing app but you won't be able to alter the words or layout once it has been exported.
Export as ProRes 4444 if the title has alpha channel otherwise you'll lose the transparency.
Andy

New Numbers User - Can I Create Monthly Invoices Which Update

Hi All,
I run a small business that creates around 40 invoices a month. Each invoice goes to the same customer each time, and only the invoice date and date range period (i.e, 01/09/08 - 30/09/08) the invoice covers need to be changed. Everything else is the same month in month out.
Is there anyway I can set numbers up to generate a new invoice at the end of each period so all I have to do is save the file and print it out?
Would save me a stack of time.
Thanks in advance.
Stuart:-)

Here is the required script.
property lastRun : missing value
on run
set myInvoice to "myInvoice.nmbtemplate"
set theDate to current date
if lastRun is missing value then
set maybe to theDate
else
set maybe to lastRun
end if
if (month of (theDate + (1 * days))) is not (month of maybe) then
set chemin to (path to application support from user domain as text) & "iWork:NumbersEnglish:Templates:My Templates:" & myInvoice as alias
tell application "Finder" to open chemin
else
set lastRun to theDate
end if
end run
Save it as an application package and install it as a "open at startup" item from the System Preferences Pane "Account > Login".
Yvan KOENIG (from FRANCE vendredi 19 septembre 2008 13:36:11)

How to create a material which can be used in T-Codes VAO1 & MB1C create

Hello Experts,
How can I create a material which can be used to create a sales order and can be used to create inventory using VAO1 and MB1C T-Codes respectively.
What are the configurations that I need to take care of, while creating it?
I need to create a material which can be used in the whole sales cycle(sales order,goods issue,billing and etc).
Please Help,
Thanks in Advance,
Suma

Hi
Thanks for your fast replies.. I have created a new material and was able to create inventory thru MB1C. But I was not able to generate a goods delivery(VL01N) and billing document(VF01) for the sales order.
Error: No schedule lines due for delivery up to the selected date
Message no. VL248
Diagnosis
There are no schedule lines due for the given order item up to the date chosen.
System Response
The system does not create a delivery item for this order item.
Procedure
Check whether the order item to be delivered contains confirmed schedule lines.
If this is the case, set the selection date further into the future if you still want to create a delivery for this item.
Please suggest,
Tanks,
Suma
Edited by: Suma B on Sep 23, 2008 3:55 PM

How to create accrual WT which is accrual monthly and auto generated?

Hi Experts,
How can I create accrual WT which can be automatically generated every month?
E.g. A WT for Incentive Accrual = Basic Salary 1340/12)*80%
How can I make this Incentive Accrual WT to be generated automatically base on the above formula and I dont need to input in any infotype?
Appreciate with your help.
Thanks!!!

Hi All,
If I create a WT and not assign to any infotype but just put in T54C3, and define the processing class 30 as cumulated in current year , will that WT be cumulated automatically and store in CRT?
Or do I have other alternatives to handle that?
Appreciate with all your help.
Thanks.

IPad2 and a new MacBook running Lion, Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my Hotmail Id for my Apple Id and use it for iTunes, iCloud

I have an iPad2 and a new MacBook running Mountain Lion. Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my current Hotmail Id for my Apple Id for iTunes, iCloud.
Note, I will use both Hotmail and iCloud eMail.

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

When create heirarchy, can not find the entry which is in master data

Hi, SDNs
When create a heirarchy for a char , click this char button to add a fields to a node, i can't search the value which is actually in the master data.
Thansk for your time

If you go to create hierararchy or change mode of hierarchy
3 types of nodes you can create
1)Text node
2)Charecteristic node
3)Infoobject values node
text node - is simple any text node you can create
infoobject values node - if the master data is loaded you can create it
if master data is loaded make sure its activated and no master data is under "M" version.
charecteristic node - only if particular infoobject node is included in the tab "external chars in hierarchies" in RSD1 of that particular infoobject
Hope it Helps
Chetan
@CP..

Can we create a UICommand which refers to a Dnpage or APC????

Similar Messages

Maybe you are looking for