Can we Debug an AuditReport for a pissed off customer HUGE BUG IN IDM AUDIT

Daily and Weekly Audit Reports return java.lang.NullPointer exception Error message.
Unsurprisingly the customer is unimpressed.
I find it impossible to find any documented method to trace what is happening once we fill in the form and start the AuditLog task.
The customer goes to Admin page, pushes the "Run" button next to Todays Activity and he gets the NullPointer error. WTF.
THIS IS A MASSIVE ERROR IN IDM. HOW CAN A IDM SYSTEM WRITE DATA TO AN AUDIT LOG WHICH IT CANNOT THEN READ???
If there was a way, ANY WAY, to find out what is the bad "object" causing this Nullpointerexception on an AuditLog I would be happy to hear.
User reports are no problem as we can readily write our own WorkFlows which exit gracefully on unexpected events. But AuditLogs are what customer relies on.
GF

Its a tease. Your link shows...
"You can trace the following methods to troubleshoot issues with Identity Auditor:
com.sun.idm.auditor.policy to trace issues with Audit Scans.
com.sun.idm.auditor.accessreview to trace issues with Access Reviews.
com.sun.idm.auditor.report to trace issues with Audit Reports.
com.sun.idm.auditor.view to trace issues with Auditor Views.
To Enable Tracing:
1.Open a browser and log in to the Administrator interface.
2.Select Configure -> Servers.
3.When the Configure Servers page displays, click the server name in the Server column to edit the settings.
4.On the Edit Server Settings page, click the Scheduler tab.
5.Select the Tracing Enabled box to activate Scheduler debug tracing and write the results to stdout.
6.Save your changes."
It states tracing Auditor yet goes on to explain how to set up Scheduler debug tracing.
My Question really is how do you set up tracing on com.sun.idm.auditor.report to trace issues with Audit Reports, someone must have done this.

Similar Messages

  • How can i debug specail function for VA01

    How can i debug specail function for VA01,For example, I establish one and export type ZA01, the procedure code is ZRVADOR01, how do I debug this procedure?
      thank you!

    First you keep a break point in the program
    Step#1.
    RSNAST00 (on the below mentioned code).
    PERFORM (TNAPR-RONAM) IN PROGRAM (TNAPR-PGNAM) USING RETURNCODE
                                                             US_SCREEN
                                                             IF FOUND.
    and now in VA01 , just start Debugging after you choose the Output type using /H at the command.
    now you will see the Debugging , now choose the menu Settings->Update Debugging
    this will activate the Update Debugging.
    Now Press F8. now another window will open , in that you it will stop near the break point in the step 1 .
    It will take you to the corresponding program/
    Now you Debug and check what ever you want

  • How can I set up iPad for use as a customer sales tool?

    I want to use my new iPad for personal and business. For my business I want to hand to a customer as a self-driven presentation on my business created In Keynote or some similar program. But I'd like to lock all personal content so the customer can only explore my business content and not access personal contacts, music, etc. Can this be done? Recommendations on apps and set-up are appreciated.

    Can't be done. All the customer has to do is press the home button and they're able to access all your apps.
    You either need different iPads for different purposes, or mount it in a display cabinet that blocks the home button.

  • Can I cloud be used for storing videos off my I Pad

    Can I Cloud be used to store videos and photos off of my I Pad?

    I highly recommend individual iCloud accounts for stuff like syncing notes, mail, calendars, contacts, etc. My wife, kids and I have a total of 4 iCloud accounts and 1 iTunes in the Cloud account. My wife has one, I have one, my kids both have one, and we have one for iTunes in the Cloud. This way music, media, apps, and books are available across all the devices...

  • How can I sort a colum for a part off the sheet? Not for the entire shett!

    I only want to sort a part of the sheet. If i sort the colom it always takes the hole sheet. How can i only sort a part of the sheet. Please help me!

    Guido,
    It is not possible to sort just one column of a table, independent of the other columns.
    The solution is to pull the column you wish to sort out of the table, sort it, and put it back into the table.
    To remove a column, Click on the column label to select the entire column. Then grab the title and pull up and away from the Table and drop it on a blank area of the Sheet. To put the column back into the table grab it by the title and hover over the main table, moving slowly until a double vertical line appears where you want to place the column, and let it drop there.
    Jerry

  • Is it true that if you give in your old ipod you can get a new one for 1/2 off?

    I heard that if you trade in your old ipod touch, you get a discount on buying a new one. Is that true?

    Alphadog1 wrote:
    I heard that if you trade in your old ipod touch, you get a discount on buying a new one. Is that true?
    Yes, but not half off. If you bring your older iPod into your local Apple store, you'll get a 10% discount towards the purchase of a newer model.
    B-rock

  • Pissed off customer

    Why can't i download my software? i am a vaild customer.
    when i click download nothing happens

    First, you're talking to InDesign users. We are not Adobe employees.
    Second, you've given us absolutely no information with which we can help you. What are you downloading? To what platform? What link are you using to download from?

  • Dashcode 3.0.2, simulator 4.3 can't debug for ipad

    Hello dear community,
    I've update Xcode to 4.1 (on Lion). Now I have Dashcode 3.0.2 and the simulator 4.3. When I use Dashcode I can simulate my webapp just for IPhone, no more IPad simulator. I haven't no more, the possibility to swtch to ios sdk 3.2 that has the option to simulate for Ipad.
    How to figure out?
    Thanks in advance and best regards, Chiara

    You will be better off posting this in the developer forums : https://devforums.apple.com/index.jspa

  • WebtopNaming - can not find server name for server ID

    We have a LB, and web servers in front of OpenSSO app servers in our environment.
    OpenSSO debug log CoreSystem fills up with lot of errors like these:
    ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
    com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
    Sometimes, it even complains about a server id (07 in the following trace) which doesn't even exist in the Site Id Table.
    There are no changes in the configuration. DNS is properly configured and all the servers and their connectivity are available. CoreSystem throws these errors even after a restart of opensso app servers.
    Any ideas about the root cause?
    amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
    Server Id Table -> {%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF=iplanet-am-naming-samlassertionmanager-url, http://host4.company.com:8080/openSSO=04, com.iplanet.dpro.profile.agent.ProfileService=iplanet-am-naming-profile-class, %protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF=iplanet-am-naming-securitytokenmanager-url, %protocol://%host:%port%uri/authservice=iplanet-am-naming-auth-url, %protocol://%host:%port%uri/sts=sun-naming-sts-url, %protocol://%host:%port%uri/SAMLAwareServlet=iplanet-am-naming-samlawareservlet-url, http://host5.company.com:8080/openSSO=05, com.sun.identity.authentication.server.AuthXMLHandler=iplanet-am-naming-auth-class, com.sun.identity.policy.remote.PolicyRequestHandler=iplanet-am-naming-policy-class, %protocol://%host:%port%uri/loggingservice=iplanet-am-naming-logging-url, %protocol://%host:%port%uri/jaxrpc/=iplanet-am-naming-jaxrpc-url, %protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF=iplanet-am-naming-fsassertionmanager-url, %protocol://%host:%port%uri/identity/=sun-naming-idsvcs-rest-url, 03,05,04,02|03,01|03=iplanet-am-platform-site-id-list, %protocol://%host:%port%uri/identityservices/=sun-naming-idsvcs-jaxws-url, %protocol://%host:%port%uri/sts/mex=sun-naming-sts-mex-url, %protocol://%host:%port%uri/profileservice=iplanet-am-naming-profile-url, %protocol://%host:%port%uri/SAMLPOSTProfileServlet=iplanet-am-naming-samlpostservlet-url, 02|02,01|01,05|05,04|04=iplanet-am-platform-lb-cookie-value-list, %protocol://%host:%port%uri/SAMLSOAPReceiver=iplanet-am-naming-samlsoapreceiver-url, https://host4.company.com:8443/openSSO=01, com.sun.identity.log.service.LogService=iplanet-am-naming-logging-class, %protocol://%host:%port%uri/sessionservice=iplanet-am-naming-session-url, https://host5.company.com:8443/openSSO=02, %protocol://%host:%port%uri/policyservice=iplanet-am-naming-policy-url, iplanet-am-naming-service=serviceObjectClasses, com.iplanet.dpro.session.service.SessionRequestHandler=iplanet-am-naming-session-class, https://opensso-qa.company.com:443/openSSO=03}
    amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
    Site Id Table -> {03=03, 02=03, 01=03, 05=05, 04=04}
    amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
    Platform Servers -> [https://opensso-qa.company.com:443/openSSO, https://host5.company.com:8443/openSSO, https://host4.company.com:8443/openSSO, http://host4.company.com:8080/openSSO, http://host5.company.com:8080/openSSO]
    amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
    Platform Server IDs -> [03, 02, 01, 04, 05]
    amNaming:05/13/2011 10:22:37:010 AM PST: Thread[WebContainer : 0,5,main]
    ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
    com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
    at com.iplanet.services.naming.ServerEntryNotFoundException.<init>(ServerEntryNotFoundException.java:52)
    at com.iplanet.services.naming.WebtopNaming.getServerFromID(WebtopNaming.java:709)
    at com.iplanet.dpro.session.SessionID.setServerID(SessionID.java:380)
    at com.iplanet.dpro.session.SessionID.parseSessionString(SessionID.java:363)
    at com.iplanet.dpro.session.SessionID.getSessionServerID(SessionID.java:261)
    at com.iplanet.dpro.session.service.SessionService.isLocalSite(SessionService.java:881)
    at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:1197)
    at com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:153)
    at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:578)
    at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)

    Thank You for the response.
    Here is my site configuration in OpenSSO:
    There are 4 servers in the two opensso hosts (2 secure, 2 non secure)
    Servers:
    http://host4.company.com:8080/openSSO
    http://host5.company.com:8080/openSSO
    https://host4.company.com:8443/openSSO
    https://host5.company.com:8443/openSSO
    Only one site with secure URLs is configured
    Sites:
    site1
    Primary URL: https://opensso-qa.company.com:443/openSSO
    Assigned Servers:
    https://host4.company.com:8443/openSSO
    https://host5.company.com:8443/openSSO
    From the CoreSystem log, Server ID definitions are:
    https://host4.company.com:8443/openSSO=01
    https://host5.company.com:8443/openSSO=02
    https://opensso-qa.company.com:443/openSSO=03
    http://host4.company.com:8080/openSSO=04
    http://host5.company.com:8080/openSSO=05
    Sometimes it throws an exception with existing server IDs. But sometimes it also complains about non existing server IDs.

  • How can I debug a routine created in Deletion of similar requests?

    Hello Experts,
    I need some help from you. I need to delete overlapping requests and the common
    settings you can set are not suitable, so I decided to write my own ABAP routine.
    But how can I debug a routine, which is implemented in the deletion of similar requests?
    Hope you can help me.
    Cheers
    Daniel Weilbacher

    Please go to the routine code..
    In the menu options..u will find an option for breakpoint--set..
    The line where breakpoint is set will get highlighted and u will also see a STOP symbol..
    then come out of routine..and then run the data load..
    this ABAP routine for overlapping request deletion runs before the scheduled data load..
    the run shud stop at the set breakpoint and show the routine code..in debugger mode..
    cheers,
    Vishvesh

  • How can I debug a sequence that has a subsequence is running in a separate thread?

    Hi,
    How can I debug a sequence that has a subsequence is running in a separate thread?
    I have to have a continues check for a  digital in signal to be able to terminate the sequence if a physical button is pushed.
    This is running in a separate thread, but this way I cannot debug the main sequence.
    Is there any workaround for this?
    Thanks,
    Andras

    This KB might help you:
    http://digital.ni.com/public.nsf/websearch/46D1E157756C37E686256CED0075E156?OpenDocument
    Let me know if this does not help.
    Allen P.
    NI

  • OC4J JSP Debugging not working for all the jsps

    Hi,
    Initially I was not able to debug jsps using Eclipse and OC4J. The jsp debugging started working once I made the below changes:
    1) global-web-application.xml is modified
    Changed the attribute development="true" in orion-web-app
    Added the below init param for the JspServlet
    <init-param>
    <param-name>debug</param-name>
    <param-value>class</param-value>
    </init-param>
    If the jsps are present in a sub directory under the webcontent none of the breakpoints are working. I am still be able to view the jsp pages on the browser.
    Tools: Oracle 10g Application Server Standalone version(10.1.3.5.0), JDK5, Windows XP, Eclipse Indigo
    Project Structure:
    Test (Eclipse Dynamic Web Project)
    -WebContent
    Sample.jsp ( Breakpoints are working)
    -subF (Folder)
    SubSample.jsp (Breakpoints are not working)
    -WEB-INF
    web.xml
    Debugging worked for http://localhost:8888/Test/Sample.jsp
    Debugging not working for http://localhost:8888/Test/subF/SubSample.jsp
    Any help is highly appreciated.
    Regards
    Danny

    This tells there is not enough main memory (not disk space) for the program to run.
    - You can look the dump in ST22, it will have suggestions on increasing the ROLLAREA??, you can forward that to Basis.
    - Most likely you will not have any more memory to assign so the above may not be feasible. Try to rework your query so it works with less data.

  • Why is debugging an AIR for Android on device via USB so awful?

    I've used Flash 8, Flash Pro CS4, CS5, CS5.5, and now CS6 and I have to say when it comes to debugging it is absolutely the worst environment I've ever worked in. Over the years the number of times I've successfully debugged an application can be counted on one hand. Really, its that bad. Flash will crash or stop responding. I place a breakpoint in the code and Flash will either: A) Ignore it, B) "Breakpoint not set; No executable code at line ###" C) Crash and burn. D) breakpoint turns on but can never be turned off.
    Its infuriating and maddening. After this much time why can't Adobe make the debugger work?
    Frankly, because of this I have to write ALOT of trace statements into my code.
    Has Adobe just given up on the debugger in Flash Pro? As a developer should I be trying to convince my company  to switch over to Flash Builder?
    For example, right now I'm trying to debug an AIR for Android 3.4.0.2540 via USB on a Motorola Droid 2. I can publish and run in debug mode and see all my trace statements just fine. But I know the instant I need to try to set a breakpoint I'm doomed. Or if my code gets in a race condition like right now. The breakpoints in the new code I added were ignored (see B above) and I can find no options in the Debug menu to break into my app and observe what code it is currently executing. My only option is to end the debug session.
    Can anyone comment on debugging in Flash Builder vs. Flash Pro? Is it any better?
    Can anyone suggest a solid development environement with debugging that supports Actionscript 3 or can compile it to some other language or object code that would allow me to reliably debug code?
    I'm sorry for venting like this. I like Actionscript 3 and I even like Flash Pro until it comes to debugging. But at this point I really need to consider other options so I can get some work done.

    Hi Chris,
    I also have an HTC Legend, and I'm trying to make some tutorials about publishing from Flash Builder to Android.
    I've notice this also, and I must say, it's a complete deception that AIR cannot support this phone, and certainly it seems that upgrading to the Android 2.2 was a bad option, since I defenitly was able to make a simple flash game, and some other exeperiments, and got them to work with AIR when this phone had Android 2.1
    If it runs on Android 2.1, maybe it was a an upgrade that make AIR incompatible with this device on Android 2.2. Is there any way of running it, maybe forcing to install a AIR version that works.
    I was starting to program on Flash Builder, and experimenting on my Legend, but now I stumbled on this.
    Thanks,
    Leonel

  • Can we debug the Html template in Internet service

    Hi ,
      I need to change the  name of a filed in srm portal "confirmation of good and service" for that i had a template but i am not able to find the label in that
    How can i find the label  ?
    can i debug the template
    help me
    thanks
    Channappa Sajjanar

    Hi Pradeep,
    Thanks for reply .Actually i found one solution which is as follow just  guide me is it correct or not?
    I gone to the screenpainter (se51) their i given the
    program name =SAPLBBP_PDH_SEARCH.
    screen number = 3001.
    in this screen only the speeling mistakes are found for the variable's
    Confirmatn Value : BBPS_SEARCH_SUBLIST_PO_WEB-VAL_CF and
    Calculatd : BBPS_SEARCH_SUBLIST_PO_WEB-QUAN_IV.
        So i just changed the spelling mistakes there in IDES SRM and they are reflection when i exceute the t-code BBPCF02 in SE80.
    now just tell me is the way i am going is correct or not ?
    what are the side effetcts of this?
    and is any way i can solve the proble  from the template?
    please give  your valuable sugetions i am very new to SRM.
    Regards
    Channappa Sajjanar

  • Can we debug programs called in background job?

    Hi Everyone,
    Here is my question:
    I set some breaakpoints in program A which is call by another program B.
    And in B, it defines a background job to run A.
    but when i run program B , the berakpoints set in A don't work,why???
    (I can not run A directly, for it needs a large amount of parameters which can't be input manually)
    How to solve it? Thanks
    Regards.

    Hi,
    Yes if it is a custom program.
    Here how it works.
    - Put a endless loop in your code.
    - Run the program.
    - Go to SM50 and select your process.
    - Then go to Program/Session->Program-> Debugging.
    - It will open the debugger. Now come out of endless loop by changing values and check whatever you want.
    Regards,
    pranaya

Maybe you are looking for