Can we develop cells or push buttons with increaseing number  auotmatically

hi all
   I am customizing a sinario which contains different number of  flats in different appartments. Sianrio is to customize Flat nos. as a blocks. 
So if we give no.of Flats in an Appartment, can we get blocks with numbering with increase order. Is it possible to develop Text areas or Push buttons in GUI programming.
if so please explain me.
  For example :  if we give number 10  then it should dispaly 10 blocks.
thankyou,
regards
Hanuma

Not sure if you can dynamically create buttons on a screen, however, you could use an ALV Grid and show a number of "flats" per line and react to each one as a hotspot.
i.e.  Put up to 10 flats on a line.  then read the line and determine the one pushed by Field Name.
you may be able to create a button in each cell of the grid, and perhaps name each one individually.
The crude way would be to put the max number of buttons on a screen and simply set unavailable "Flats" button to active.= 0.
Edited by: Paul Chapman on Dec 5, 2008 2:09 PM

Similar Messages

  • When I try to download a free or purchased APP I get a box that says userID is disabled and a push button with "OK". I can't download any apps

    when I try to download a free or purchased APP I get a box that says userID is disabled and a push button with "OK". I can't download any apps

    Depending on why it's been disabled, you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
    If it then works on your computer's iTunes but not your iPad then try logging out of your account on the phone by tapping on the id in Settings > Store and then log back in and see if that 'refreshes' the account on it

  • Can we disable the default push buttons on the ALV Grid

    Hi,
        Can we disable the default push buttons on the ALV
    Grid Control...
        If so, pls send me the procedure...
    thanks and regards
       raghu

    Hi,
    In the PBO:
      PERFORM f9100_exclude_functions USING :
                             i_exclude[]  '&CHECK',
                             i_exclude[]  '&REFRESH',
                             i_exclude[]  '&LOCAL&CUT' ,
                             i_exclude[]  '&LOCAL&COPY',
                             i_exclude[]  '&LOCAL&PASTE',
                             i_exclude[]  '&LOCAL&PASTE_NEW_ROW',
                             i_exclude[]  '&LOCAL&UNDO' ,
                             i_exclude[]  '&LOCAL&APPEND',
                             i_exclude[]  '&LOCAL&INSERT_ROW',
                             i_exclude[]  '&LOCAL&DELETE_ROW',
                             i_exclude[]  '&SORT_ASC',
                             i_exclude[]  '&SORT_DSC',
                             i_exclude[]  '&FIND',
                             i_exclude[]  '&SUMC',
                             i_exclude[]  '&SUBTOT',
                             i_exclude[]  '&MINIMUM',
                             i_exclude[]  '&MAXIMUM' ,
                             i_exclude[]  '&VGRID' ,
                             i_exclude[]  '&VEXCEL' ,
                             i_exclude[]  '&VCRYSTAL',
                             i_exclude[]  '&HTML',
                             i_exclude[]  '&MAINTAIN',
                             i_exclude[]  '&SAVE',
                             i_exclude[]  '&GRAPH',
                             i_exclude[]  '&HELP',
                             i_exclude[]  '&ALL' ,
                             i_exclude[]  '&SAL' .
    *                         i_exclude[]  '&EXCLALLFC'.
    *&      Form  f9100_exclude_functions
    * This form exclude buttons  from the toolbar.
    *      -->P_IEXCLUDE  text
    *      -->P_1150   text
    FORM f9100_exclude_functions USING   pexclude LIKE i_exclude
                                   value(pfunction).
      DATA: l_exclude TYPE ui_func.
      l_exclude = pfunction.
      APPEND l_exclude TO pexclude.
    ENDFORM.                    " f9100_exclude_functions
    This will exculde the default push buttons.
    Let us know if it works for you.
    Regards,
    Anjali

  • Add  push button to Serial number tab in migo transaction

    Hi all,
    I need to add an upload push button to the tab screen of serial numbers in migo transaction.Is there any exit, or badi,or enhancement spot for this.
    Thanks & regards,
    Srilakshmi.

    Hi Ritvik,
    you will not need it.
    The item methods will process exactly the item what the addional item data are related to. In PBO_DETAIL and PAI_DETAIL, use parameter I_LINE_ID for the item reference.
    Note: Not only read SCN etc,  also the parameters desciption of the methods used.
    Regards,
    Clemens

  • Why can't I activate iMessage and FaceTime with phone number?

    Hi, I own an iPhone 4, recently I restored it and now I can't activate iMessage and FaceTime using my phone number.
    I read and performed all the steps shown in apple troubleshooting article about activating iMessage and FaceTime and that didn't work either.
    Before restoring the iPhone both iMessage and FaceTime were working just fine...
    Why is that? What can I do?
    Thanks,
    Konrad

    in settings where you have them turned on, does it say waiting for activation ?

  • First time user: I can't find the favorites tab/button with my imported favs

    Downloaded firefox today. I imported my favorites from internet explorer 9. I can't find my favorites. Is there a button/tab/list that I'm not seeing? I want to be able to go to a list of favorite sites as I did in e9 and not type in a website every time I want to go there.
    Is this what bookmarks are for? I'm not very computer savvy.

    You can usually find the imported IE Favorites in a folder ("From Internet Explorer") at the bottom of the Bookmarks Menu folder (Bookmarks > Organize Bookmarks).
    If you can't find them in the "From Internet Explorer" folder then try this:
    * Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export
    * Import the HTML file in Firefox: Bookmarks > Organize Bookmarks > Import & Backup > Import HTML: From File
    See also:
    * http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file")

  • Screen still active whilst on call and I keep pushing buttons with my face, putting it on pause, facetime etc even cutting off call

    having problems when on a call, I keep touching the creen and pressing buttons, ie pause, facetime etc. have tried resetting the phone but makes no difference.
    Does anyone know what the problem is??

    Duplicate of
    https://supportforums.cisco.com/message/4174339

  • Unwanted Tooltips on Push buttons with ~webgui 1

    We are still using integrated ITS on ECC 6.0 and have recently implemented support stack 15, which messed up all of our table control.  By upgrading the service parameters below, we were able to fix the table control issues and the screen works fine.  However, when we put the mouse over the pushbuttons in the application, it shows our tool tip followed by "pushbutton deactivated".  The pushbuttons actually work fine and we tried changing our tool tip text in the screen, but whatever we put in always adds "pushbutton deactivated" to our wording on the screen.  Any idea where this might come from. 
    We have tried to play with the SICF parameters and if we remove the ~webgui 1 the problem is eliminated, but then we have trouble with our toolbar, which none of the simple_toolbar parameters will seem to fix.
    -Change the ~generateDynpro 1  to ~webgui 1
    -Change the ~webTransactionType EWT  to                         ~webgui_simple_toolbar 128
    -add ~webgui_theme sl
    -add ~theme sl

    this issue will be resolved with Support Package 16. To fix this error
    on SP15 please open GUI_BUTTON.HTML in SE80, service WEBGUI, theme DM
    HTML-Templates, search for
    if (quickinfo!="")
    tooltiptext = " title=\"" & strmask(quickInfo) & " " &
    fcode2key(fkeyid) & " " & a11y_button_type & " " & #a11y_disabled &
    else
    if(buttonlabel!="")
    tooltiptext = " title=\"" & buttonlabel_masked & " " &
    fcode2key(fkeyid) & " " & a11y_button_type & " " & #a11y_disabled &
    end;
    end;
    and replace with
    if (quickinfo!="")
    tooltiptext = " title=\"" & strmask(quickInfo);
    tooltiptext = tooltiptext & "\"";
    else
    if(buttonlabel!="")
    tooltiptext = " title=\"" & buttonlabel_masked;
    tooltiptext = tooltiptext & "\"";
    end;
    end;
    Please republish WEBGUI to site INTERNAL after changing this.

  • Can the cops trace my lost iphone with imei number?

    can the cops trace my iphone true imei number ? i lost him

    Currently there's little that can be done, but according to the WSJ today there has been an agreement among US carriers to establish a database of lost phones to help prevent registering stolen phones on another account.  This won't help you today though.
    http://online.wsj.com/article/SB10001424052702303815404577334152199453024.html

  • Problem With Push buttons on the selection screen

    Hi All,
    I've taken 3 push buttons on the selection-screen with the following syntax
    SELECTION-SCREEN: FUNCTION KEY 1,
                      FUNCTION KEY 2,
                      FUNCTION KEY 3.
    and have removed the F8 execute button using FM RS_SET_SELSCREEN_STATUS
    Now, the problem is i'm able to perform validations using At selection screen but the code after the Start-of-selection is not being triggered.
    I mean the processing is being terminated after the at selection-screen.could anyone please tell me how do i trigger some code after the event start-of-selection when a user presses a push button with sy-ucomm = FC01.

    Check the below sample program :
    REPORT ZLPRWINSPC_TMP .
    tables : mara,
             sscrfields.
    select-options s_matnr for mara-matnr.
    initialization.
    sscrfields-functxt_01 = 'Clear Selection'.
    selection-screen function key 1.
    AT SELECTION-SCREEN.
    case sscrfields-ucomm.
    when 'Clear Selection' or 'FC01'.
    clear s_matnr.
    refresh s_matnr.
    endcase.
    Thanks
    Seshu

  • How to get GUI Status(Push Buttons) in ALV Report

    Hi Friends
    I have a requirement in a way that:
    Once selection-screen was processed,an ALV report has to come and above the ALV List,I need a custom GUI Status(4 Push Button) with Push Buttons Logic.
    Once I had clicks on thesse push button,I need to display one more ALV List and above this List,again I need a custom GUI Status(2 Push Buttons) with Push Buttons Logic.
    Can anyone throw some light how we can achieve this.
    Thanks for your cooperation!
    Regards,
    Madisetty

    data: rt_extab type slis_t_extab,
            g_ucomm like sy-ucomm ,
            g_selfield type slis_selfield.
    form alv_display .
      call function 'REUSE_ALV_LIST_DISPLAY'
         exporting
         i_callback_program             = g_repid
         i_callback_pf_status_set       = 'PF_STATUS'
         i_callback_user_command        = 'USER_COMM'
           it_fieldcat                    = it_fldcat
          tables
            t_outtab                       = it_final1
      perform pf_status using rt_extab.
      perform user_comm using g_ucomm g_selfield .
    endform.  
    form pf_status  using    p_rt_extab.
      set pf-status 'PF_STATUS' excluding p_rt_extab.
    endform.
    form user_comm  using    p_ucomm like sy-ucomm
                             p_selfield type slis_selfield.
      data: l_row type i.
      case  p_ucomm.
        when 'DISPLAY_PO'.
          loop at it_final1 into wa_final1.
            if wa_final1-sel eq 'X' .
              l_row = l_row + 1.
            endif.
            if l_row gt 1.
              message e004.
            endif.
            clear wa_final1.
          endloop.
          p_selfield-fieldname = 'SEL'.
          read table it_final1 into wa_final1 index p_selfield-tabindex .
          set parameter id 'BES' field wa_final1-ebeln.
          call transaction 'ME23N'.
      endcase.
    endform.
    *create user interface for gui status by double clicking on 'PF_STATUS'.
    *Check the above sample code .

  • Increase the height of push button ?

    Hi,
    I want to increase the height of the push button in the selection screen in module pool. Please suggest.
    Thanks in Advance.

    Ya, the length can be increased. But.. Actually the problem is: there is a module pool program executing which a selection screen comes first. In the selection screen, there is a push button with some text written in it.
    I need to increase the size of the push button , as well as the Text size, so that the people viewing the screen from the distance, will be able to see the Text clearly.
    Please suggest some solution.
    Thanks,
    Saheli.

  • How do I change the color of the small LED inside a Push Button

    One of my colleagues managed to accidentally change the color of the LED inside the Push Button. He didn’t know how he did it and we couldn’t figure out how to change it back. It’s easy enough to replace the Push Button with a fresh copy from the Buttons & Switches pallet but I would like to know how to control this parameter. Does anyone know how to do this?

    Hi Bob,
    Could you help us help you?
    Please post a VI with the troubling pushbutton so we can see the issue.
    If you are talking about the LED shown in the attached jpg,
    that color can NOT be changed at run-time. Use the Paintbrush.
    Ben
    Message Edited by Ben on 10-14-2005 10:26 AM
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction
    Attachments:
    Led.JPG ‏20 KB

  • [1]RE Buttons with Hotkeys.

    [1]RE>Buttons with Hotkeys... 4/17/96
    I will be out of town from 4/5 to 4/12. For issues concerning:
    TRACS - Please use the TRACS Support Beeper 973-5171
    Napa Migration - Paula Cue
    Regards,
    Jackie
    Date: 4/9/96 3:35 PM
    To: Jackie Lefton
    From: [email protected]
    Question...!
    Anyone out there know how you can create a push button
    with a hotkey?When I wanted to do this, I finally wound up creating
    menu items and assigning hot keys to the menu items
    (which does work). If one of your menu items has exactly
    the same function as your push-button, voila!
    Geoff
    ------------------ RFC822 Header Follows ------------------
    Received: by gateway.apple.com with SMTP;9 Apr 1996 15:30:51 -0800
    Received: from sagesun.Sagesoln.com ([206.80.24.106]) by
    federal-excess.apple.com (SMI-8.6/8.6.12) with ESMTP id PAA07215; Tue, 9 Apr
    1996 15:29:06 -0700
    Received: (from majordom@localhost) by sagesun.Sagesoln.com (8.6.12/8.6.9) id
    PAA00200 for forte-users-outgoing; Tue, 9 Apr 1996 15:23:02 -0700
    Received: (from uucp@localhost) by sagesun.Sagesoln.com (8.6.12/8.6.9) id
    PAA00195 for <[email protected]>; Tue, 9 Apr 1996 15:22:58 -0700
    Received: from uucp2.netcom.com(163.179.3.2) by sagesun via smap (V1.3)
    id tma000192; Tue Apr 9 15:22:44 1996
    Received: from forte.UUCP by netcomsv.netcom.com with UUCP (8.6.12/SMI-4.1)
    id OAA18373; Tue, 9 Apr 1996 14:06:01 -0700
    Received: from [192.104.236.126] (berts) by forte.com (4.1/Anterior/SMI-4.0)
    id AA02090; Tue, 9 Apr 96 13:54:45 PDT
    X-Sender: [email protected]
    Message-Id: <v02110100ad8fd6b193f7@[192.104.236.126]>
    Mime-Version: 1.0
    Content-Type: text/plain; charset="us-ascii"
    Date: Tue, 9 Apr 1996 01:58:05 -0700
    To: [email protected]
    From: [email protected] (Geoff Puterbaugh)
    Subject: Re: Buttons with Hotkeys...
    Sender: [email protected]
    Precedence: bulk
    Reply-To: [email protected]

    As your OS volume is a different volume to your RAID1 setup, reinstalling the OS will not affect the RAID1 setup.
    With regards to your phantom account, you could try peaking behind the scenes to see if you can find this account, then delete it (for real) and then see if it will let you recreate it. You would do this as follows
    Launch Workgroup Manager
    In Preferences make sure Show All Records and tab and inspector is turned on
    Click on the 'target' symbol on the left which is the inspector tab
    From the drop down menu select Users
    You will hopefully now see this missing account, select it, then delete it

  • Hardware push button acting as mechanical switch (latch when released)

    Hello,
    I have a simple question. How can I have a hardware push button (momentary switch fed into DAQ board as a digital input) exhibit the same characteristics as a boolean with its mechanical action set to Latch when released?
    Is it possible to do that?
    Thanks,
    r15
    Solved!
    Go to Solution.

    Is the code implemented easier when a "latch when pressed" behavior is required?
    The problem I am facing is that when I press the hardware button, the indicator "element" is incrementing as long as the button is pressed. I need it to only increment one time until I release the button and press it again.
    Hence, everytime I press the button (no matter how long I keep it pressed), I want the indicator to increment only once to count the number of times the button is pressed.
    I attached the VI below to make things clearer.
    Attachments:
    Untitled 1.vi ‏44 KB

Maybe you are looking for