Can we trigger a seperate pricing procedure in invoice?

Hi,
While going thru few documents I came across a qs.Can we trigger a different pricing procedure than the one in sales order at the time of invoice creation ? I know that pricing can be redetermined at invoice level too and all but can we triggere a different Pricing Proc altogether?
Can there be any situation like this in real time?

Can we trigger a different pricing procedure than the one in
sales order at the time of invoice creation ?
YES this is very well possible. You differentiate the document pricing procedure from the one in VOV8 to VOFA and maintain different pricing procedure for these different combinations in OVKK.
Can there be any situation like this in real time?
I dont think so and in fact, it is not an ideal situation to have a different one.
thanks
G. Lakshmipathi

Similar Messages

HOW CAN APPLY FREE GOOD 4 PRICING PROCEDURE?

TELL ME SIR HOW CAN APPY FREE GOOD 4 PRICING PROCEDURE?

Hi Pradeep
1.Run trans. VBN2 to first create master record for free goods as follows:
Enter following information in selection screen:
- Free goods type: NA00
- Sales org, distribution channel, customer # and execute.
Now in next screen create the record as follows:
- First select the exclusive button and verify that you are in exclusive view.
(that is if you want exclusive)
- Material#, Min qty - Say 34 cartons. (check in what units you want to manage)
From: 34 cartons
unit of measure:
Free goods: 12 Pcs
Unit of measure: Pcs
Calcualtion type: 1 or try the other options
Deliver control: Blank or any of the other options suitable to you.
Now save and exit.
Now run VA01 for 34 cartons and press enter. The system will automatically propose the free goods
item at no additional charge. Try higher order qtys and see if the free goods qty are scaling up.
If not adjust the calculation parameters in the master record screen
It should be transaction VBN1. Sorry for the error.
VBN2 is to change the record. VBN1 creates it.
If you want to give free goods to some of the customers than
1. create a customer group say 99 for FREE GOODS
In Free Goods Menu:
2. add a feild catalog for CUSTOMER GROUP
3. create a condition table (free goods) say 555 only for customer group
4. create a sequence say FREE with condition table 555
5. create a condition type say FREE with
6. maintain pricing procedure say ZFREE with condition type FREE
Now assign:
7. Active Free goods Determination or Assign with your sales organisation this procedure ZFREE
8. Create free goods determination with transaction code /nvbn1 for FREE with Key Csuomer Group
99 for exclusive
Give customer Group say 99 and from 34 to 34 free 12
Thanks
G. Lakshmipathi

Diff pricing procedure for invoice and sales order?

can u please help me out in the following question
Is it possible to have different pricing procedure for sales order and invoice?

hi venkat,
yes we can very well have different pricing procedures for order and invoice. for the combination of
sales org + dist chan + div + <b>document pric proc</b> + cust pric proc --- > Pric Proc.
we determine the pric procedure. So, just have a different document pricing procedure for sales order document type and invoice document type. You can have a different pricing procedure with this change.
Hope it helps. Pl reward if useful.
Thanks
Sadhu Kishore

New pricing procedure for invoice correction

Hi ALL,
We want a new pricing procedure during invoice correction request.
Scenario:When we execute a sales order ,create a delivery & create a billing docuemnt with z@1111 a pricicng procedure.
Now we want to create an invoice coreection with different pricicng procedure Z@0002.
can any one help!!!
Regards,Rajneesh

Maintain a new Document Pricing Procedure in Invoice correction request. This will help in determining new pricing procedure based on assignment in T.Code: OVKK.
Pricing Procedure:
Determination of Pricing Procedure:
In SD, Pricing Procedure is determined based on Sales Area (Sales Organization + Distribution Centre + Division) + Customer Pricing Procedure + Document Pricing Procedure through T.Code: OVKK. Sales Area is determined in Sales Order Header Level. Customer Pricing Procedure is determined from Customer Master. Document Pricing Procedure is determined from Sales Document Type / Billing Type (if configured). Once the pricing procedure is determined, Condition records are fetched. If appropriate condition records are found, the price is determined. If Mandatory pricing condition is missing, system will through an error message.
Configuration of Pricing Procedure:
Step 1:
Condition table (T.Code: V/04): If existing condition table meets the requirement, we need not create a new condition table. Considering the requirement for new condition table, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Table (select the required fields combination, which will store condition record).
Step 2:
Access Sequence (T.Code: V/07): If existing access sequence meets the requirement, we need not create a new access sequence. Considering the requirement for new sequence, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Access Sequence (Access sequence is made up of Accesses (Tables) & the order of priority in which it is to be accessed. Here we assign the condition table to access sequence.
Step 3:
Condition Type (T.Code: V/06): If existing condition type meets the requirement, we need not create a new condition type. Considering the requirement for new condition type, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Type. It is always recommended to copy an existing similar condition type & make the neccessary changes. Here we assign Access sequence to Condition type.
Step 4:
a. Pricing Procedure (T.Code: V/08): It is recommended to copy a similar pricing procedure & make the neccesary changes in new pricing procedure. Pricing Procedure is a set of condition type & arranged in the sequence in which it has to perform the calculation. Considering the requirement for new Pricing Procedure, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Maintain Pricing Procedure.
b. Pricing Procedure (T.Code: VOK0): After maintaining the pricing procedure the next step will be determination of pricing procedure. Configuration for determining pricing procedure in SPRO is as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Determine Pricing Procedure.
5. Condition record (T.Code: VK11 / VK12): Condition record is a master data, which is required to be maintained by Core team / person responsible from the client. During new implementation, the condition records can be uploaded using tools like SCAT, LSMW, etc. Condition Record is maintained in T.Code: VK11 / VK12, which are captured in Sales Order & Billing.
Also check document pricing procedure in Sales Document Type (T.Code: VOV8 - Sales order Type, VOFA: Billing Type (If Required)), customer pricing procedure in Customer Master Data (T.Code: XD02), ... are in place.
Regards,
Rajesh Banka
Reward suitable points.

How to determine pricing procedure for invoice list

Hi ,
Could you pl let me know "How to determine pricing procedure for invoice list"
All other things are available i.e.
Create Condition Tables
Maintain access sequences
Maintain pricing procedures
Define condition types
Basically how the pricing procedure will be assigned for the Invoice list.
br
pinky

Hi Pinky,
Create a billing doc type by coping std.(ZF1)
Assign invoice list to billing type Zf1
Now maintain a document pricing procedure (for Eg: Z )
Assign this to billing type in pricing control - document pricing procedure.
Now maintain the pricing procedure determination as per the sales area /doc pp/cust pp.
Also in copy control in VTFL maintain pricing type as " B".
REgards,
Krishna O

Credit Memo Req. with different Pricing Procedure than Invoice

Hi
I need to create a credit memo req. from invoice reference - but both should have different pricing procedures. I have assigned different doc. pricing proc. to the new credit m. req. and maintained proper pricing proc. determination. Also in copy control at item cat. level I have maintained pricing type as B. Still the invoice pricing proc. is being copied. Am I missing out something ?
Thanks in advance.

Hi,
sorry could not update early. the suggestions were already implemented. it should have worked but still the problem was there. couldn't find out the exact reason.
i needed to create the credit memo req. in background th. BDC.
finally what i did was - in recording - I did not put the reference invoice number in the initial screen and rather went ahead to put document type then customer. then after pressing enter - the intended pricing proc got determined based on CuPP and DoPP. Now from file-create with reference - i had put the invoice reference - it did not affect the previously determined pricing proc.
it was a king of work around basically, but interesting - thought of sharing with you.
however thanks for the replies.

Help needed-Regarding pricing procedure and tax inn configuration

Hello Friends
I have a new scenario in sap mm-
i have to do teh customizing in 2 days please guide me up.
my company SAY :A is in india imports material from parent company B in america.
This A company some times gets material from local vendors in mumbai. where VAT and CST comes into place.
we are using use tax INN configuration for this.
ther are Customs duty, there is no excise duty as everything is just imported., edu cess, CVD,and freight charges etc.
can you please decribe me in detail the pricing procedure required for my company A which is in india.
and the customization of TAXINN.
any information will be really helpfulbecause i am struck on creating condition types.
Help me SAP GURUS>>Please..u wil be my life saver..

Hi Aravind,
For domestic purchase Vat & CST are applicable. If it is intra state VAT is used & if it is interstate CST is used. These condition types have to be manitained in the TAX procedure.
JVRD - I/P VAT
JVCS- I/P CST.
we have maintained condition records for both these condition types along with the tax code in FV11. In the case of import purchase, you need to maintain seperate pricing procedure for import which will include ,
JCDB - BASIC CUSTOMS DUTY
JCV1-CVD
JECV-EDU CESS
J1CV- SEC EDU CESS
JEDB- IMPORT CESS
JADC- ADDITIONAL CUSTOM DUTY.
All these conditions will be available in PO item level & you need to maintain % for these conditions. Hope it helps.

Pricing procedure in service

Hi
Can the same pricing procedure be used for standard PO and Service PO? What is the purpose of creating a seperate pricing procedure for service?
Regards
Soumen

HI,
The conditions as required in the pricing procedure are not all applicable to the service PO. Hence the same procedure canot be utilised by the service p[o's too.
If only few conditions are there in the pricing then the same can be used for service PO too with an item category 'D'.
But ideally we have to configure a new service pricing proc similar to that of a calculation schema.
Hope this helps,
Regards,
Prasanna
Award pls if helpful

Pricing procedure for Service PO and Service Entry Sheet

Hi
Can the same pricing procedure be used for Service PO and Service Entry Sheet? What is the purpose of creating a seperate pricing procedure for service entry sheet?
Regards
Soumen

There is no separate pricing procedure for Service Entry Sheet. Whatever the schema is determined in Service PO, the price is calcuated during service entry sheet. However you can maintain separate calculation schema for service purchase orders.
This schema will be determined based on the schema group assigned in Vendor Master.

Different pricing procedures on Sales order and billing documents

Hello All,
I have come across a situation where I will have to maintain seperate pricing procedures for Sales order and the corresponding billing document.
I was just wondering if this is normal. In my previous projects I always had same pricing procedure for the order and the billing.
Please share your experience.
Appreciate your help.
Thanks,
Raj

Hello Friend
This is a very common requirement in many implementations depending on the scenario
Sales order with one pricing procedure The same sales order when goes for billing
Billing document with another pricing procedure
Settings needed
Order type VOV8 has a document pricing procedure Say A
Billing type VOFA has a document pricing procedure Say B
Sales area 1000,10,00 and CPP is 1
OVKK settings is like this
1000,10,00 DPP A, CPP1 Pricing procedure is RVAA01
1000,10,00 DPP B, CPP1 Pricing procedure is RVAA02
The control data in both RVAA01 and RVAA02 is different
In VTFL between your del type to billing type aunder the header that item level The pricing type should be B (carry out new pricing) if delivery related billing
In VTFA betwen your ord type to billing type aunder the header that item level The pricing type should be B (carry out new pricing) if ordery related billing
Now the same sales order will carry PP RVAA01at order level and RVAA02 at the billing document
There can be some business scenarios you want to add some extra discount at the time of billing
That time you have a discount type added in the billing PP so that it is reflected in the billing
This is scenario dependent
Hence SAP has given the option of DPP in VOFA so that by billing documentwise we can differentiate
To achieve this Copy control settings and DPP should be different both in VOV8 and VOFa
Regards
Raja

Reg Pricing Procedure

DA,
Can we maintain different pricing procedures for Sales & billing document, if so in which scenario do we maintain & where do we maintain at the configuration level.
Rgds,
Ramesh.

There may be many scenerios where we can do this.
for which the basic price would be same.
for example you have a order created in the system..
The client says that he will give the terms of order later that is whether he wants a C form transaction or a H form transaction
then you can probably use the different pricing procedure in the billing documents.
In Excise invoice also If I am not wrong we can use a seperate pricing procdure.
reward points if useful,
regards,
Amlan

Invoice List Split - pricing procedure

Hi,
Please help.
We do not want to maintain the factoring discount for Invoice list.
We are combining the invoices , Debit memos, inv cancellations in the invoice list type LR. But we have different pricing procedure for invoices and debit memos. As a result the invoice list splits because of different pricing procedures. To avid split based on the pricing procedure, created a routine (data in VBRK/VBRP) and reset the pricing procedure field(VBRk-KALSM).
So the LR invoice will have pricing procedure as blanks. Please advise if this will have any other implications and also please guide the correct way of doing it.
Thank You.

Hi
Well split can be avoided by user exit which exist at transaction VOFM look into this and get billing exits to avoid the split. There may be some condition at billing comment it as you dont need to split at billing. PLs do this appropriately as else you may stop the process. Anymore pls shoot me with the code you have done.
so it can be well avoided with user exit.
Cheers
AnthonyM

Urgent: How to bring the same pricing procedure in reversal order??

Hi,
We have recently implementated CIN at our client location. For the orders present in the system before CIN implementation, when we are creating the reversal orders, system is bringing the new pricing procedure with CIN condition types?
Can we bring the same pricing procedure in the reversal order as in the sales order?
Please advise urgently.
Regards,
Peeyoosh.

Dear Peeyoosh
I am unable to understand from your comments
"For the orders present in the system before CIN implementation, when we are creating the reversal orders"
Please let me know how do you reverse a sale order. To my knowledge, we can reverse delivery and billing but not sale order. Either we can close the sale order by assigning some reason for rejection or delete the sale order.
This being the case, please let me know why you are reversing and how you are reversing. If you want the same pricing procedure for both normal sales and returns, then maintain the same pricing procedure for both document types.
thanks
G. Lakshmipathi

Is it possible to change pricing procedure in sales order VA02

Hi,
My client need to change the pricing procedure in their RETURN order because they implemented a new pricing procedure for the specific distribution channel. However, since the return order was created with reference to invoice, the old pricing procedure was copied instead of the new that was implemented. Is there a way that they can still change the pricing procedure in the return order? Here is the scenario for better understanding.
1. Sub-distributor sales order created (distribution channel = 60) on 5/24/2014. The pricing procedure maintained was ZRVB01.
2. Delivery and Billing was created on the same date with pricing procedure ZRVB01.
3. A new pricing procedure ZRVB12 was created for distribution channel 60 on 6/2/2014.
3. Return order was created with reference to the billing document in step 2 on 6/24/2014. The pricing procedure of the return order was still ZRVB01, instead of ZRVB12.
4. In VA02, the field pricing procedure is not modifiable.
Need advice how my client can proceed in correcting the pricing procedure on their return order.
Appreciate your response.
Thank you.
Emil

Since your requirement is to calculate the different price for the returned qty, please check for the return order if you can make any manually change the price as required.
Please note you can not change the pricing procedure in document, but you can change the price of the material as suggested above.
I assume you already knew the pricing procedure determination, how it is determined.(Sales area+DPP+CPP).
If you want to have different pricing procedure to be determined for the same customer in return sales , you must have the following determination so that it would be determined the 2nd pricing procedure during return order.
Example :
For standard sales : Sales area + DPP in OR(A- standard)+ CPP( 1 standard) =ZRVB01
For return Sales : Sales area + Dpp in RE (B- return)+CPP(1 standard) =ZRVB12.
thanks,
Srinu.

Pricing procedure mm Packing and forwarding to be calculated on Basic price

Hi experts
we are having one pricing procedure where in details are as follows.
basic price                                                 100
excise                                                           12.36
total                                                             112.36
P & F 2 % 0n (112.36)                                   2.24
total                                                             114.60
Vat 5 % 0n (114.60)                                       5.73
Grand total                                                   120.33
Now we require new pricing procedure wherein Packing & forwarding to be calculated on basic price & not on basic + excise
so can we change in same pricing procedure or we have to create new ?
Can you elaborate with the configuration steps ? Any changes required in Tax procedure also or not ?
Thanks in advance
regards

Hi,
No need you can add the condition type to the pricing procedure at spro--mm---purchasing--pricing procedure ---calculation schema with proper calculation to get the percentage on base price and add to the total .
Regards,

Can we trigger a seperate pricing procedure in invoice?

Similar Messages

Maybe you are looking for