Canceling FIOS - What needs to be returned?

I have been a long time Fios customer, but canceled my service.
I was told I would be sent prepaid boxes to return my equipment.
My question is what needs to be returned, based on what I have?
DVR - Yes.
Cable card - Unsure?
Router - Unsure, FAQ states it doesn't have to be if I had service for at least a year?
Digital adapter boxes - Unsure, they were offered as free about 3 years ago?

If the cable card is installed in Verizon owned equipment, it obviously goes back with the equipment. If it is installed in a TiVo or Televsion set or similar customer owned device, I would be very susprised if Verizon wants it back. The Cable Card is 'paired' to a device, and I believe the pairing is 'permanent' as a security feature. As a result a 'used' cable card is worthless once it comes out of the device it was paired with.

Similar Messages

\What command keys do i use to fill data. I need this for return address labels

What command keys do i use to fill data.I need this for return address labels

Here's an overly chatty example that will show you what's happening:
$strContacts = 'Tony Stark', 'Anthony Edward Stark'
Write-Host 'User names:'
$strContacts
Write-Host
foreach ($strContact in $strContacts ) {
Write-Host "Start of loop. Processing $strContact now."
$arrContact = $strContact.Split(' ')
Write-Host
Write-Host "$strContact has been split apart into individual array elements based on a space character. The elements are below:"
$arrContact
Write-Host
Write-Host 'Start building filterName variable. Index of -1 gets the last element in the array.'
$filterName = "$($arrContact[-1]), "
$filterName
Write-Host
Write-Host "Loop through the remaining names in the contact. Need to process $($arrContact.Count-1) names."
for ($i = 0 ; $i -lt $arrContact.Count - 1 ; $i++ ) {
$filterName += "$($arrContact[$i]) "
Write-Host "filterName variable is now $filterName"
Write-Host
Write-Host "Now we need to trim off the trailing space character."
$filterName = $filterName.Trim()
Write-Host "The final value of filterName is $filterName"
Write-Host
Write-Host 'Attempting to get the user object via Get-ADUser now:'
Write-Host
Get-ADUser -Filter "Name -eq '$filterName'"
Write-Host 'End of loop.'
Write-Host
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

I submitted my information to receive a replacement 1st generation nano but somehow did not notice what steps I needed to take to return the Ipod to Apple. What needs to be done after submitting the serial number information online?

I submitted my information to receive a replacement 1st generation nano but somehow did not notice what steps I needed to take to return the Ipod to Apple. What needs to be done after submitting the serial number information online in order to obtain a replacement?

They're supposed to send you a box with shipping instructions which you then use to send them your 1st generation iPod, however, I've been waiting a month for my box and can't figure out why I have not received it

Hi, We have an application built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1. When we try to download a file(.pvw file) in that application safari throws "Download failed" error. Please suggest what needs to be done.

Hi,
We have an application built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1.
When a file url is clicked instead of asking for Save or Open or Cancel options, the file gets opened on IPad by default.
Is this default behaviour which cannot be changed or can it be configured to ask user preference?
When we try to download a file(.pvw file -> a model file) in the above application, safari throws "Download failed" error.
Please suggest what needs to be done.
Regards,
Pramod

Safari on an iPad in general does not allow downloading of files. That's a safety precaution in the iOS SDK to keep unauthorized content off of iOS devices. Safari will open from the web site file types that it can handle, but direct downloading isn't normal behavior, and I don't believe the behavior can be changed, though you can try asking in the developer forum, either here or the one to which you have access as a member of Apple's iOS developer program.
Regards.

What needs to be installed on a client machine?

Downloads Documentation Discussion Forums Articles Sample Code Training RSS Resources For
Oracle Data Provider for .NET FAQ
About ODP.NET
I am familiar with SQL Server's .NET data provider, but am new to Oracle. Is it easy to learn to use ODP.NET? (Last Updated: 12/27/04)
What are the different ways Oracle integrates with Microsoft .NET? (7/22/05)
Where can I find ODP.NET help and sample code? (12/12/03)
I have ODP.NET installed, but I can't find the ODP.NET Dynamic Help. Where is it? (4/11/05)
What are the new features in this version of ODP.NET? (7/22/05)
How do I make a feature enhancement request for ODP.NET? (12/04/02)
What features will ODP.NET support in future releases? (12/04/02)
Configuration and Certification
Do I need to install ODP.NET on my Oracle database server? (7/22/05)
Can ODP.NET work with Oracle8, Oracle8i, Oracle9i, and Oracle10g database (DB) servers? Can these DB servers be on Linux or Unix? (7/22/05)
Can ODP.NET be used with an Oracle8, Oracle8i, or Oracle9i Release 1 client? (11/02/04)
What do I need to have installed on my client machine to have ODP.NET work? (11/02/04)
Does ODP.NET support Windows Server 2003, .NET Framework 1.1, and Visual Studio .NET 2003? (11/02/04)
Common Runtime Issues
How do I use distributed transactions with ODP.NET? (3/20/03)
What if I have some applications that require an earlier Oracle client (e.g. using the Microsoft OLE DB Provider for Oracle with Server Explorer)? I want to be able to run both ODP.NET and these other applications from the same machine. (12/12/03)
I get an error: "Unable to load DLL (OraOps.dll)". How do I fix this? (4/23/04)
I want to use the Oracle9i Release 2 version of OraMTS with an Oracle8i database. I get a "No error information available: XACT_E_NOENLIST(0x8004D00A)" error when running an application using OraMTS. (12/04/02)
ODP.NET and Other Oracle Providers for .NET
Are ODP.NET and Microsoft .NET Framework Data Provider for Oracle the same product? (12/12/03)
Which .NET data access driver should I use among ODP.NET, Microsoft .NET Framework Data Provider for Oracle, OLE DB .NET, and ODBC .NET? (12/04/02)
I bundle ODP.NET with an application I've built, which I want to distribute or sell. Does Oracle charge licensing fees for this? (7/16/03)
Q: I am familiar with SQL Server's .NET data provider, but am new to Oracle. Is it easy to learn to use ODP.NET?
A: Yes. ODP.NET inherits from all the ADO.NET base classes, which is what SQL Server's .NET data provider, SqlClient, is based upon. The ADO.NET constructors, methods, and properties that you use with SQL Server will be the same with Oracle. For many applications, the only notable differences will be having all objects that were preceded with "Sql", such as SqlConnection, be preceded by "Oracle", such as OracleConnection, and accounting for differences between Oracle and SQL Server database data types, SQL, and stored procedure calls.
Q: What are the different ways Oracle integrates with Microsoft .NET?
A: Oracle integrates with .NET in a number of ways. For optimized .NET data access, ODP.NET enables access to all of the Oracle database's advanced features, such as RAC and XML DB, while ensuring the fastest performance from the .NET Framework.
For .NET development tools that make Oracle easier to use, the Oracle Developer Tools for Visual Studio .NET provide wizards and designers that auto-generate ODP.NET code and can browse and edit schemas and stored procedures. Additionally, it includes a Data Window to modify and view data and context-sensitive help.
Beginning with Oracle Database 10g Release 2, developers can build and deploy .NET stored procedures for their Oracle database.
For application integration, web services can facilitate integration between your existing Oracle and .NET applications.
Q: Where can I find ODP.NET help and sample code?
A: ODP.NET documentation is available from within Visual Studio .NET using Dynamic Help. Just hit the F1 key when your cursor is on an ODP.NET API and a help page for that API will appear right within Visual Studio .NET.
Additional ODP.NET documentation is available both locally installed and from the ODP.NET documentation page.
Sample code can be found both locally as part of the ODP.NET installation (e.g. c:\oracle\<Oracle Home Name>\ODP.NET\samples) and on ODP.NET samples page.
ODP.NET users can ask questions on the ODP.NET discussion forum.
Q: I have ODP.NET installed, but I can't find the ODP.NET Dynamic Help. Where is it?
A: This behavior sometimes occurs when installing new Visual Studio .NET versions over an ODP.NET installation. To enable ODP.NET Dynamic Help, go to Visual Studio .NET Combined Help Collection Manager located in Visual Studio .NET 2002 or Visual Studio .NET 2003. Make sure the box next to the Oracle Data Provider for .NET Help is checked and click on the Update VSCC button. Close Visual Studio .NET and re-open it to enable ODP.NET Dynamic Help.
Note: Because of security restrictions, you may need to copy and paste the links above to a browser, rather than clicking on them. Once copied to a local browser, if you have a Windows service pack that prevents active content (e.g. Windows XP service pack 2), you will need to allow active content to view the complete page. To do this, click on the yellow bar at the top of the Visual Studio .NET Combined Help Collection Manager page, which indicates active content has been blocked. Select "Allow Blocked Content". A security warning will show up. Click "Yes" and you will be able to view the page in its entirety, including having the option to incorporate the Oracle Data Provider for .NET Help into Visual Studio .NET.
Q: What are the new features in this version of ODP.NET?
A:
ODP.NET 10.2.0.1.0
Server-side ODP.NET for .NET stored procedures
RAC client-side connection load balancing and automatic connection cleanup
Database Change Notification
LOB and LONG retrieval - faster data retrieval, InitialLOBFetchSize can be up to 2GB, and full LOB functionality when InitialLOBFetchSize > 0 (i.e. GetOracleClob and GetOracleBlob methods are enabled). These same features are now enabled with LONGs with its respective APIs.
Connection Pool Management - explicitly clear connection pool(s)
Client Identifier property for supporting application context security, such as with VPD
Input REF Cursor parameters
ODP.NET 10.1.0.3.0
Statement caching
DeriveParameters - automatic population of stored procedure parameters
Cancel long running queries
ADO.Net 1.1 interfaces - HasRows and EnlistDistributedTransaction properties
LOB and LONG retrieval - Entire LOB and LONG column data can be retrieved even if the select list does not contain a primary key, ROWID, or unique key.
ODP.NET 10.1.0.2.0
Grid support
Schema-based XMLType
BINARY_FLOAT and BINARY_DOUBLE datatypes
Multiple Oracle Homes
ODP.NET 9.2.0.4.01
Improved XML DB and XMLType support
PL/SQL associative arrays
connection pool validation
InitialLOBFetchSize property to improve LOB retrieval performance
Q: How do I make a feature enhancement request for ODP.NET?
A: You can contact Oracle Support or use the ODP.NET discussion forum to make an enhancement request.
Q: What features will ODP.NET support in future releases?
A: In general, Oracle does not discuss features in future product releases until the release date nears. We are well aware of enhancement requests made through the ODP.NET discussion forum and Oracle support. We encourage Oracle users to continue to make their requests known. Oracle will do its best to fulfill these requests in future releases.
Q: Do I need to install ODP.NET on my Oracle database server?
A: No. You only need to install ODP.NET for running client or middle-tier .NET applications. The exception is if you are using .NET stored procedures in the database server. The server-side ODP.NET provider will automatically be installed with the Oracle Database Extensions for .NET.
Q: Can ODP.NET work with Oracle8, Oracle8i, Oracle9i, and Oracle10g database (DB) servers? Can these DB servers be on Linux or Unix?
A: Yes and yes. Oracle clients can support older and newer versions of the Oracle database. Consult the Oracle on Windows FAQ for more information.
Oracle clients on Windows can work with Oracle database servers on any platform.
Q: Can ODP.NET be used with an Oracle8, Oracle8i, or Oracle9i Release 1 client?
A: No. You need to use the Oracle9i Release 2 or higher client.
Q: What do I need to have installed on my client machine to have ODP.NET work?
What needs to be on a client machine when running an application compiled with the 10g ODP.NET?
The FAQ states the following :-
A: You will require the following:
Windows 2000, Windows XP Professional, or Windows Server 2003
Microsoft .NET Framework 1.0 or higher
Oracle9i Client Release 2 (9.2) or higher
Oracle Net Services (included with the client)
Oracle Services for Microsoft Transaction Server, Release 2 (9.2) or higher. This is required for applications using distributed transacations.
This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
I'd be very grateful for anyone who can clear up my confusion.
Mick

This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.

When trying to perform updates I get this message. This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. What do I do?

When trying to perform updates I get this message: This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. What do I do? I just bought the MacBook Pro new and migrated my apps from my old MacBook Pro.

Perform the following, stopping with the first one which works:
1. Open the Mac App Store's Purchases tab. If you're prompted to accept them into your Apple ID, do so.
2. Move them out of the Applications folder(they may need to be put into the Trash temporarily), and then see if you can download them for free from their individual product pages. If you're asked to buy them, see #3.
3. Click here, contact Apple, and wait for a response.
4. Buy them.
(116300)

What data does SNMP return and what is the best way to explore it?

Hi All
I have some queries about using SNMP on Cisco devices.
1. What is the best way to get an idea of what data MIBs can return?
I have entered the commmand "show snmp mib". However, the number of MIBs generated is huge!
2. Can you enter a command on the Cisco device itself that returns snmp data?
e.g. if I want to see what data a MIB entry returns, can I interrogate it on the Cisco device itself rather than having to rely on network management software?
The reason I ask is that we are currently looking for Network Management Software. However, I have no idea what data SNMP can return, therefore don't know if what the Management Software offers is comprehensive or not.
Any suggestions on how best to get an idea the data SNMP can generate plus any other suggestions are very welcome!
Thanks
John

Generally speaking, snmp can query about any parameter of the system. An enterprise class device has almost all conceivable parameters instrumented thus. A device's inventory (chassis, cards, ports, power supplies, software image, etc.) and the state of its interfaces and traffic they are carrying are among the primary ones.
You can query a device's snmp variables remotely "by hand" using an open source distribution of a tool like snmpwalk. You need to know what you're looking for - i.e., the exact oid (object ID) string or else you get a long reply like you alluded to. It also helps to have the actual MIB you are querying against locally so that the output you get will be human-readable. Otherwise you'll get long numeric strings (the snmp oid) followed by alphanumeric values which may or may not make sense at first glance depending on the oid being queried. A MIB's purpose is to add that abstraction layer / interpretation to make the output more useful to the operator.
The purpose of an NMS (very generally speaking) is to give an even higher layer of abstraction to organize the querying and reporting of all these various data into a useful system with dashboards, graphs, reports etc.

What is meant by return tables?

what is meant by return table?
with one example

hi
Return tables are used in cases where one record from the transaction translates into multiple records - something like cost allocations - you book an expense to the company for $1000 and that $1000 has to be translated into
$200 for your cost center
$500 for the general cost center
$300 to the project
this data ofcourse need not come from the transaction where you will have one line saying $1000 - you could have these weights maintained in a separate table in BW and do the cost allocation while receiving the data.
You can find a lot of information about the same in the FI related extractors / Update rules - or even more specific - the CO area..
hope it helps..
cheers.

Cancelling Document When My Check gets Return

Dear Gurus
is there a Document to cancel if my deposited check gets return ,How business One reacts to this situation.What will be the condition of my Voucher,Please explain clearly
Zubair

Hi Mohamed
The best option would be to cancel the payment document (Incoming Payment). Then you can request a new check from the customer and post a new incoming payment, or you could credit the invoice if you want to reverse the sale (for whatever reason).
Kind regards
Peter Juby

I cant send to hotmail addresses any more. what needs to be done please? Many thanks.

I used to be able to send emails to hotmail addresses, but I no longer can and they are returned to me as undeliverable. What needs to be done please?
Many thanks.

Unfortunately, it's not any clearer from a .
It may be worth asking Apple via Express Lane, but I suspect it may mean you doing your journals again. I was just trying to determine whether the files you see in 'manage' are all your journals or just those you created after expanding your space. If they are all your journals, you may want to delete them before you create to many more, if you need to delete them later to free up space, you may well lose all your journals.

The F5 Networks Host Plugin no longer works since I upgraded to Firefox 4.0.1 and this is a major problem. what needs to be done to correct this?

When attempting to login to a GlasPac (auto glass) website, it requires an F5 Plugin to be installed. This has been working in the past using Firefox 3.x.x and now since I upgraded to Firefox 4.0.1 it says the plugin in not compatibable with Firefox 4 and will not load it so I am dead in the water !!!!!!! The FF 4.0 upgrade has caused this serious situation ... what needs to be done to rectify it ???
Thanx in advance ... Denny

Do these hotfixes help you? http://support.f5.com/kb/en-us/solutions/public/12000/700/sol12757.html

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

Creating a service ; What needs to be added to tnsnames.ora and JDBC url?

DB version: 11.2.0.2
OS platform : Solaris 10
We have a 2 node RAC.
DB name   = mbsprd
Instance1 = mbsprd1
Instance2 = mbsprd2I want Instance 1 (mbsprd1) to be used for our OLTP application and Instance 2 (mbsprd2) to be used for another application of DSS nature.
Based on the syntax
srvctl add service -d <dbname> -s <ServiceName> -r <Preferred Instance> -a <Available Instance>I am going to create 2 services
-- Creating a service called OLTP
srvctl add service -d mbsprd -s OLTP -r mbsprd1 -a mbsprd2-- Creating a service called DSS
srvctl add service -d mbsprd -s DSS -r mbsprd2 -a mbsprd1-- Starting the services
srvctl start service -d mbsprd -s OLTP
srvctl start service -d mbsprd -s DSSI guess the above steps are enough to configure a service at the server side.
I would like to know what needs to be done at the client side.
Currently the tnsnames.ora file and JDBC url used by our clients are shown below. What needs to be added to tnsnames.ora file and jdbc URL to start using services configured above?
-- SCAN based TNS entry
mbsprd =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (COMMUNITY = tcp.world)
        (PROTOCOL = TCP)(Host = p148149-scan.tpam.net) (Port = 36964))
    (CONNECT_DATA =
      (SERVER       = DEDICATED)
      (SERVICE_NAME = mbsprd)
      (FAILOVER_MODE=(TYPE=SELECT)(METHOD=BASIC))
-- TNS entry based on local listener
-- Instance 1
mbsprd1 =
(DESCRIPTION =
   (ADDRESS_LIST =
   (ADDRESS =(PROTOCOL = TCP)(HOST = hsolarp148-vip)(PORT = 36973))
   (CONNECT_DATA =
         (SERVICE_NAME = mbsprd)
         (INSTANCE_NAME = mbsprd1)
-- Instance 2
-- TNS entry based on local listener
mbsprd2 =
(DESCRIPTION =
   (ADDRESS_LIST =
   (ADDRESS =(PROTOCOL = TCP)(HOST = hsolarp149-vip)(PORT = 36973))
   (CONNECT_DATA =
         (SERVICE_NAME = mbsprd)
         (INSTANCE_NAME = mbsprd2)
)JDBC entry for RAC
jdbc:oracle:thin:@p148149-scan.tpam.net:36964:mbsprd -- Alternative version used by some clients because the above had 'some issues'
jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=TCP)(HOST=p148149-scan.tpam.net) (PORT=36964))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=mbsprd)(FAILOVER_MODE =(TYPE = SELECT)(METHOD = BASIC)(RETRIES = 180)(DELAY = 10))))

OLTP =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = p148149-scan.tpam.net)(PORT = your_port_number))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = OLTP)
DSS =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = p148149-scan.tpam.net)(PORT = your_port_number))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = DSS)
)JDBC entry for RAC
jdbc:oracle:thin:@p148149-scan.tpam.net:36964:service_name
jdbc:oracle:thin:@new_tns_entry_description(if you would like to connect the database with particular service)
try this and let us know any issues,

I have an iphone 4 and it will not boot. I've done everything except downgrade the firmware to 6.1.3 or 6.1.4... is this what needs to happen and if so can I please get a link to do so? thanks

I have an iphone 4 and it will not boot. I've done everything except downgrade the firmware to 6.1.3 or 6.1.4... is this what needs to happen and if so can I please get a link to do so? thanks

Hi JACOBfromINSIDEaLION,
If you are unable to get your iPhone to restore, you will want to perform a restore from recovery mode, as explained in the following article:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

Canceling FIOS - What needs to be returned?

Similar Messages

Maybe you are looking for