Cancellation of profroma invoice

Hi,
can anyone tell me how to cancell proforma invoice>
I tried to do it thru VF11, but it is not possible there.
Is it possible and if so, then how
thanks in advance

Hi Sankar,
As far as i am aware there are no subsequent documents to a proforma invoice unless you have configured billing to other sales document copying control. Even in that case status of the proforma will not affect subsequent documents as inquiry / quotation / order would be a new transaction altogether. (but i am not sure if you can create a sales doc with reference to proforma after completing it)
Regarding preceding documents, the status of delivery would change as soon as the proforma is created. But i am not sure if it changes again after the proforma is completed.
In any case, this status will not affect any transaction; it may impact only if you are using the status field in any developments.
Cheers,
KC

Similar Messages

Cancelation of profroma invoice

Dear All
My user has used the VF04 and generated proforma invoices twice for STO.
I have tried in VF11 but i am getting message saying Pro forma invoice cannot be cancelled.
I have tried with VF02 and shift+f5 it is showing canel message but the register is showing the
double values. i want the value should be nulified.
How can i cancel or reverse all these invoices.
Any body help.
Edited by: sapmonk18 on Jul 8, 2011 7:30 AM

If i have to create a cancelaion like s1 to f8
Sorry Not Possible. First please ask yourself why for a proforma where there is no significance for value, you need a cancellation document type. Still if you want to deviate the standard, assign the Document Category to M in VOFA for F8 and try the process.
thanks
G. Lakshmipathi
Edited by: Lakshmipathi on Jul 8, 2011 4:41 PM

Cancel a SD invoice error message "no authorization for transaction FB08"

Hi Gurus,
I am trying to cancel a SD invoice and am receiving the error message " no authorization for transaction FB08" is coming. Never has this happened in past, i have checked all the security authorizations also and they are in place. Accounting document status is showing as not cleared. Also, as per my understanding cancellation of invoice happens through VF11 which does not calls FB08. Please point out reasons as to why this could be happening and the possible solution thereof.
regards
Anmol Pareek

Hi Anmol
Once you got the error screen, immediately after that goto T code SU53 and expand all link. Take the screen shot and send it to your BASIS team to provide you proper access.
Yes you are correct cancellation is done through VF11 but sometime some programs internally calls other T codes.
take help of your basis team.

Auto cancellation of excise invoice while cancelling commercial invoice

Dear Experts,
we have done for one of our client that when they create commercial invoice,excise invoice accounting is also getting created. But when i am cancelling the commercial invoice,excise accounting is not getting reversed. Pls suggest measures so that when we cancel the billing doc.excise accounting docs should automatically get reversed .
Also suggest appropriate note if it needs to be applied.
Thanks,
AKD

Hi
Hope these OSS notes are of useful
Note 551932 - Cancellation of Billing with Excise invoice
1081187 Automatic cancellation of excise invocie in billing
regards

Not able to cancel the Excise invoice for STO process

Hi All,
In STO process, we need to cancel the excise invoice due to some business requirement. When we tried to do the same in J1IH, it is not allowing us to do the same with the error "No item information transferred into Accounting". Tried the same through J1IS with the internal Doc No. Here the error is document is complete.
Please guide how to cancel the same.

Hi,
STO has been created either through MM route or through SD-MM route.
In MM route, the process is as below,
You create PO, followed by MB1B (Transfer posting) , then followed by J1IS (Excise Invoice).
In SD-MM route the process is as below,
You create PO, followed by VL10B , then VF01, then followed by J1IIN (Excise Invoice from Factory).
Normally, when you create Excise Invoice through J1IIN, it is automatically released to Accounting.
In your case, I feel it has not yet been released to accounting and I hope, Excise Invoice has been created through J1IS.
In MM route, you need to release the Excise doc to Accounting.
In that case, you need to go for J1IV and release the same to accounting.
Find out the Internal document number from the Excise Invoice and with the reference of this Internal document number release it to Accounting through t.code J1IV.
Now, once it is released to accounting, you should be able to cancel it through J1IH or J1IS.
Please let me know if any further problem you are facing.
Regards
Pradyumna

Cancellation of excise invoice for depot

Is there any way out to cancel or reverse the excise invoice for depot??

Hi,
Which transaction you are using for posting excise invoice for depot? If it is J1IG, then it is difficult to cancel.
If it is J1IS, then you can select option Cancel & post the invoice
Regards,
Prashant Kolhatkar

Cancel the excise invoice in Intra company stock transfer

Dear Gurus,
I have one issue in CIN.
The following are the my sequence of operation.
Intra company stock transfer.
1. Purchase order with UB. (from plant A)
2. Delivery ( from plant B),
3. PGI ( from plant B),
4.Excise Invoice ( from plant B to A),
5. Billing ( from plant B),
6. Creating Excise Invoice without purchase order Manually (from plant A),
after PGI and Before MIGO.
7. MIGO.
Now i want to cancel the Excise invoice in Plant A.
how can i cancel the excise invoice.?
kindly provide the valid information.
Thanks.
Best Regards
Anbu

In T.Code: J1IIN, there is an option of deleting / cancelling the Excise Invoice. On the top most left hand side (after entering the Excise Invoice number) select Excise Invoice --> Cancel / Delete.
Here it is possible to cancel the Excise Invoice.
Regards,
Rajesh Banka

Reverse the material document before cancelling the excise invoice.

Dear Experts,
While cancelling the exice invoice thru J1iex , system is giving me an error message "Reverse the material document before cancelling the excise invoice" .......I checked PO history where all the material documents are already cancelled with MIGO cancellation (movement 106 )
But in J1iex , if I select the cancel option and put this invoice number , it is showing me one document with status "IN PROCESS" and if I select that doc and try to save it. System prompted me the message "Reverse the material document before cancelling the excise invoice ,but if I am trying to post this document system is issuing me a message "All Part I entries have been canceled for excise invoice ...........xx.Exicse table J_1IGRXREF and J_1IPART1 alrady update with both documents.kindly any one suggest me positive.
MINI

Hello
follow the below steps
1. MIGO:Cancel the material document (movement type 102) & during cancellation update part1 only. This changes the excise invoice document status to In process
2. J1IEX:Post the excise invoice referring the material document (of movement type 102). Creates an accounting document to reverse the CENVAT postings. Creates a corresponding entry in Part II of the appropriate excise register
Thus the excise postings are reversed.
3.J1IEX: Cancel the excise invoice (Do this if your plant does not allow multiple goods receipts per excise invoice).Now the system will allow you to cancel the vendor excise invoice
above the procedure right. you will get this updation excise registers also
Laxman

Problem in Cancellation of Excise invoice

Hi,
User has created Import PO then he made custom MIRO then GR is done and through J1iex part1 is done. later he realized that there is problem with PO condition for that he has first cancelled the GR then secondly cancelled Custom MIRO. now while doing cancellation of excise invoice in j1iex then below error is throwing
Reverse the material document before cancellation of excise invoice.
So after anaysis of PO in that PO histery got found some amount difference of MIGO delivery cost document. hence i guess this will be the reson of cancellation of excise invoice.
So please provide the solution.
Regards
Rahul

Hello,
Cancell the Customes MIRO
Cancel the MIGO , simuteneously system reverse the PART1 also
Then Cancel the excise Invoice , (first capture the excise invoice wrt to reversed GR document and after the cancel the Excise
Invoice wrt Internal doc nor or vendor excise Invoice no)
Reason: before MIGO you are captured the excise Invoice it means that system will updated J_1IEXCDTL table , after MIGO system will updated the GR refference in the above said table, so i,e the reason capture the excise Invoice wrt Reversed GR and check)
Regards
Mahesh Naik

Cancellation of Excise invoice after MIRO

Hi Everybody,
How do i cancel the Excise Invoice after MIRO.my scenario is Net Inclusive of Excise duty. the procedures which i followed as follows,
1.PO with Zero Tax code > J1iex(captured the Excise Invoice)>GR which refers EI>Posted EI.
After posting EI i found thats wrongly captured then i did canceled the EI as follows
2. GR Cancellation>Posted EI against canceled GR>Canceled the EI.
Now my RG23A got cleared.then i did again step 1 as well as MIRO.After did miro again i found that captured EI is Wrong. I have to followed below procedure to Cancel the EI,
3.Cancell the MIRO document in MR8M>GR Cancellation>Posted EI against canceled GR>Canceled the EI.
When i tried to POST EI one pop up message is coming i.e status of EI one is for INPROCESS another one one is for Posted .I chose Inprocess and entered i was getting following Error
No Part I exists for availing credit in excise invoice 364 2008
Message no. 4F112
If i Chose POSTED i was getting following error,
Excise invoice 364 2008 has already been posted for vendor 103769
Message no. 4F107.
Can anybody tell me where i'm wrong what procedure i need to follow
Regards
Govindaraj

hi
plz check the document year for inprocess and posted doc
now steps for excise invoice cancellation will be as follows
1 cancel MIRO document with MR8M
2 cancel MIGO document in MIGO
3 goto J1IEX choose post here give the excise invoice no of the document (u will get this no from table J_1IEXCDTL and field DOCNO)
4 now in misclinious tab give the rejection code and simulate u will find all the duties are reversed (compare with previous posting)
5 now ur invoice is cancelled and u can go for new GR and new postings
regards
kunal

Cancel the Excise Invoice.

Hi,
I created the Billing document and Excise Invoice. When i went to the Document flow in the Billing Document I found the Accounting document of the Excise Invoice and its status is Cleared.
After that I Cancelled the Excise Invoice. And again I checked the Document flow in the Billing document. But the status is showing the same.i.e Cleared.
Wt it mean..is it correct?
regards,
jyothi.

It is correct. the cancellation of excise invoice wont affect the document flow of sales document. For status go to J1ip enter the invoice no or billing doc and enter. here u can see reversed in the status.
Hope it clarifies ur doubt.
anya

Put the balance back in credit memo if I cancel the refund invoice in AP

Hi Friends,
.When I Crete a the refund in AR for the credit memo , an invoice will be created for the party in AP. But if I cancel the AP invoice. This is not putting back the balance in my AR credit memo. We are on 12.1 , Please suggest if there are any patches or any addition setup to be done to put the balance back in credit memo if I cancel the refund invoice in AP.
. Is there any program create refunds invoice in AP for all the credit memos available in AR?
Please give some suggestions,
Sireesha

Hi,
When I Crete a the refund in AR. it creates a Payment request invoice in AP for that party. But if i cancel the invoice create in AP for the refund, that is not effecting the customer balance in AR. Please suggest.
Sireesha

User Exist or BADI to restrict cancellation of Excise Invoice..!!!!!

Hi,
After Creation of Commercial Invoice or MIGO the excise invoice should not be canceled , We are using following doc flow for creation of excise invoice
Delivery - - > Proforma Invoice - - > Excise Invoice - - > Commercial Invoice.
So what should we use ( User Exist or BADI ) to restrict cancellation of Excise Invoice ???
T-code : J1IIN
Ankesh

I think you are very much aware of forum rules and still posting
duplicate threads.
Do you want to be a guest of julius ?

SD Billing - Avoid Cancellation Creation if Invoice has not been posted yet

Dear all,
I have noticed this problem in my company system.
Problem descripion:
- you creates an invoice and the system doesn't post it for any reason
- then you create the cancel of the invoice, BEFORE forcing the posting of the invoice
--> user creates Cancel, Cancel is not posted as well.
--> from now it is impossible to post both invoices: if you try to post the Invoice after the cancel creation, the VF02 recongnise that a CANCEL exists and do not allow for the posting
--> standard VFX3 doesn't signal this kind of not posted documents situation.
Ok, The right procedure for thes user should be: create invoice, if not posted then try to understand why not posted, and not CANCEL it.
But in this case VFK3 was not able to detect the invoice was not posted: it was not in the list.
So the 2 ways must be:
1) one possibility could be undestand in VFX3 could be enhanced: I checked in OSS but I didn't find anything.
2) other possibility: add a further check in interface between SD and FI in order to check if original invoice is not posted to FI and in this case block the cancel creation, as instead standard SAP does.
Could you please give me an idea on how it would be better proceed?
Thank You very much.
Raffaella

Dear,
thank you for your feedback.
in VOFA the flag is not ticked.
The problem was that In VFX3 no data were found for the specified document (with all "Inclomplete Due To" check box flagged), even if invoice and relative cancel were already created, but not posted.
When we tryied to to post them, via VF02 for example, the system didn't warned anything specific and, doing the posting via debug, we discovered that the posting was stopped because VBRK-RFBSK = E = "Billing Document Cancelled".
So, forcing via debug that value = ' ', because of the urgency of Finance Office, we could invoice it and then do the same for its cancel.
So at the moment it is not possible for me to reproduce the error in the system.
The only workaround I can imagine, is to find a way to avoid cancel creation if invoice is not posted yet.
Do you think this is feasible way?
Thank You veyr much for your suggestions.
KR
Raffaella
Edited by: Raffaella Sacchetto on Nov 29, 2010 3:43 PM

How to stop cancellation of cleared invoice?

Currently the SAP SD system is allowing the users to cancel the cleared invioce, which is not according to the companies business policy.
How can I stop that, if user try to cancel the cleared invoice system should give an error message and stop.
I am using standard billing type "F2" for invoice and "S1" for cancellation.
I have also checked the "Copying control: Billing document to billing document" but could not find any control which is
Target "S1" AND Source" F2".

Hi
In VOFA for your billing type ( not in copy controls ) in the cancellation tab assign Routine 029 in copying requirements
This will make sure a cleared invoice does not get cancelled
Regards
Raja

Cancellation of profroma invoice

Similar Messages

Maybe you are looking for