Cannot access beginning Mouse point
I see the 4 red dot beginning mouse point access area but on
slide two there is no way to orginate the mouse movement other than
where it ended up in slide 1.
This is a big hassle and waste of time.
How can I fix this QUICKLY!
Doug
No fix, that's how Captivate works. The cursor moves from one
slide to
the next, always starting from it's last position on the
previous slide.
Why would you want the cursor to start from a position on one
slide
different from where it was on the previous slide? The mouse
is here,
then it's suddenly over there...the cursor doesn't jump
around like that
normally. I'd think that would be a little disconcerting.
If you REALLY need to do that, you can put in a slide that
does not have
any cursor showing (don't show the cursor), then on the next
slide you
can place the cursor where you want it to reappear...
Erik
dougfresh wrote:
> I see the 4 red dot beginning mouse point access area
but on slide two there is
> no way to orginate the mouse movement other than where
it ended up in slide 1.
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips!
Similar Messages
-
I tried to alter security settings resulting in rejection of my password. Tried booting using CMD R but non operating mouse pad means I cannot access top menu to select "utilities"
jmcg60,
which security settings did you try to alter? Do you have a USB mouse that you could use in place of your non-operating trackpad? -
I cannot access old e-mails via Time machine since installing Mountain Lion at the beginning of August. I can access those received and sent since the benning of August. I can access other documents prior to August.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
Cannot access windows shares with NTFS junction points
Hi,
I upgraded to Mavericks and now I cannot access Windows shared where the folders are access through NTFS junction points. (NTFS junction points are like symbolic links to files/folders).
Regular shares are working fine and these shares are working on Windows PC's. I also tried before and after on another Mac Mini I have, so is definitatley something to do with upgrading to Mavericks.
Thanks in advance
A.This is related to Apple's new SMB2 implementation in Mavericks.
Instead of connecting to your Windows share via SMB, connect via CFIS. Note that I had to disconnect from Windows share, restart, and then reconnect with CFIS to get the NTFS junction points to work.
From ZDNet:
You can also try forcing Mavericks to use the older SMB variant, Common Internet File System (CIFS). To do this, simply edit your server connection URL so that it uses CIFS. Use the Finder to choose the "Go" menu and select "Connect to Server..." (or just use command-K) and type "cifs://YourServerName" and hit Return; the server should mount. If it doesn't, try entering the share's designation as well, e.g. "cifs://YourServerName/YourDriveName."
[BE SURE TO RESTART AFTER DISCONNECTING FROM SMB SHARES AND BEFORE THE CFIS CONNECT TO MAKE SURE ALL ACCESS THREADS CLOSE!]
https://discussions.apple.com/thread/5467191?start=0&tstart=0
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/
Kevin -
Fortran: "cannot access address" or "reference through nil pointer"
Hi,
I'm experiencing a strange problem with my Fortran code. When I compile with "-g -openmp=noopt" I get strange results in a particular subroutine. Before presenting the details, I should mention the problem goes away if I remove the "-openmp=noopt" compiler option. I'm using Sun Fortran 95 8.2 Patch 121020-02 2006/04/06, on a Solaris 10/x86 machine.
My code wasn't behaving as expected, so I went into the debugger to find out what and where the problem was. I found the location of the problem and what was happening, but don't know what's causing it or how to fix it.
Specifically, I call a subroutine with a number of arguments (integers, single precision scalars, single precision arrays, character arrays) and upon entering the subroutine, I cannot access the values of the majority of the passed arguments anymore and I get error messages "cannot access address 0x3fa00000" or "reference through nil pointer". Meanwhile, the variables passed that I can still access no longer have the same values they did before the call to the subroutine.
Also, using the where command after I have called the subroutine gives me weird results. For example, most of the arguments as stated in the where command take the form "ibeg = <bad address 0x3fa00000>".
I've checked the variable assignments before the call to the subroutine and they're all as they should be. Also, there are no parallel regions around the call to this subroutine and I have confirmed that this part of the code, is in fact, serial. In addition, none of the arguments I am passing to the subroutine are calculated inside a parallel region. If it makes any difference, there is a file open when the subroutine is called.
Any help or guidance I could get in resolving this problem would be much appreciated.
Thanks in advance,
Jon
Message was edited by:
PerryBothronThe basic dificulty is that your code has to go through the optimizer
when you use -xopenmp=noopt. We tell the optimizer not to actually do any
optimizations but sitll implement the OpenMP directives, but some things still
get messed up due to bugs. Because dbx expects parameters to be at
certain stack offsets, and because the optimizer doesn't really want to put
them there, we have a bug.
I think this is bugid 6184310.
It affects parameters only. Local variables should still work as far as I know.
It only affects x86, not sparc code.
If you use "stopi at &foo" instead of "stop at foo" then dbx should stop
on the very first instruction of the function (before the prolog).
This should get you the same behavior as you see with fully
optimized code. You should be able to see the parameters as long
as don't start to step into the function itself.
A few more details: Normally dbx will implement "stop in foo" by stopping
after the prolog code at the top of a function. Dbx is expecting this
prolog code to dump all the register parameters onto the stack at the
same offsets that the fortran front-end assigned to them. But the prolog
code is putting them at different offsets, because the code is optimized.
Hence the problem. -
I've been having two issues with my Late 2008 MacBook Pro 15-inch - Running OS X 10.8.5 (Mountain Lion). Unable to Reset the PRAM and Run Apple Hardware Test (AHT).
On a random basis - File/Folder icons are Sticking to the Mouse Pointer - Not Releasing. I've done everything from trashing finder preferences, making sure Universal Access preferences are off, Restoring Defaults in the Energy Saver System Preferences, Resetting the System SMC. Another post mentioned that this is being caused by the Graphics Driver not working correctly - and mentioned to put the MBP to sleep, then wake it up, and the files/folders are no longer sticking to the mouse pointer. This works for me and released the sticking items in the Finder.
OK, Good this is a simple fix, BUT, what is really causing this issue, and how may it be fixed or repaired?
I also tried to Reset the PRAM and Run the Apple Hardware test (AHT), and these both fail to run on my MacBook Pro with OS X 10.8.5.
1) Resetting the PRAM:
Shut down the MBP, press the power button, and hold down at the same time <option><command>-P-R. The Reset PRAM process never starts up, but rather I receive the Padlock/Password Login which logs me into the Restore System Utilities. I'm unable to Reset the PRAM.
2) Apple Hardware Test (AHT):
Shut down the MBP, press the power button, and hold down the "D" key, the system boots up as normal and does not enter the AHT.
The File/Folder Finder sticking to the mouse pointer issue is very annoying. Does anyone have a solution to resolve this issue?
- CheersHI Barbara,
It sounds like the hard drive is failing or has failed. Boot from your Mac install disc and if you can run Disk Utility in case the startup disk needs repairs.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If you cannot boot from your install disc, try booting in Safe Mode
What is Safe Mode
Carolyn -
Photos is not working. cannot access my pics!
Just got the new "upgrade" to 10.10.3 and the new Photos is shutting down every time it opens. I cannot access my old iPhoto pics. Anyone else? This is like having Windows, not Apple...
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Wireless mouse pointer which does not move after boot *sometimes*
Hi,
I have a wireless keyboard/mouse combo from Logitech (MK700 keyboard and MX705 mouse), which uses a USB receiver.
After booting, the mouse pointer sometimes is completely blocked, and I have to reboot to make it work. Sometimes I need to do this twice. I cannot reproduce it and this is not linked to the fact the mouse is active or on sleep mode. This seems to be a race condition, considering it is difficult to reproduce. Once the mouse pointer is working, there is no issue anymore during desktop use.
I compared lsmod when mouse pointer is working or not, and did not see any difference in the loaded modules.
This started to happen maybe 3 months ago. I have had this hardware for two years with no problem in the past. It is not a battery problem either.
Has anyone an idea?
Last edited by zebulon (2012-03-21 07:22:53)Thanks.
Ther is indeed a difference in evedev detection in Xorg logs when mouse is working or not working.
Not working:
[ 22.745]
X.Org X Server 1.12.0
Release Date: 2012-03-04
[ 22.765] X Protocol Version 11, Revision 0
[ 22.765] Build Operating System: Linux 3.2.9-1-ARCH x86_64
[ 22.765] Current Operating System: Linux arch 3.2.12-1-ARCH #1 SMP PREEMPT Mon Mar 19 17:50:01 CET 2012 x86_64
[ 22.765] Kernel command line: root=/dev/sda6 ro vga=891
[ 22.765] Build Date: 05 March 2012 05:59:48AM
[ 22.765]
[ 22.765] Current version of pixman: 0.24.4
[ 22.765] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.765] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.765] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 06:16:55 2012
[ 22.816] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.816] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.841] (==) No Layout section. Using the first Screen section.
[ 22.841] (**) |-->Screen "screen1" (0)
[ 22.841] (**) | |-->Monitor "monitor1"
[ 22.841] (**) | |-->Device "device1"
[ 22.841] (**) Option "IgnoreABI" "True"
[ 22.841] (**) Ignoring ABI Version
[ 22.841] (==) Automatically adding devices
[ 22.841] (==) Automatically enabling devices
[ 22.866] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 22.866] Entry deleted from font path.
[ 22.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 22.871] Entry deleted from font path.
[ 22.871] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 22.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 22.871] Entry deleted from font path.
[ 22.871] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 22.871] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 22.871] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.871] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.871] (II) Loader magic: 0x7cef60
[ 22.871] (II) Module ABI versions:
[ 22.871] X.Org ANSI C Emulation: 0.4
[ 22.871] X.Org Video Driver: 12.0
[ 22.871] X.Org XInput driver : 16.0
[ 22.871] X.Org Server Extension : 6.0
[ 22.872] (--) PCI:*(0:1:0:0) 10de:05e2:1682:2394 rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
[ 22.872] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22.872] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
[ 22.872] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 22.872] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 22.872] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 22.872] (II) "record" will be loaded by default.
[ 22.872] (II) "dri" will be loaded even though the default is to disable it.
[ 22.872] (II) "dri2" will be loaded by default.
[ 22.872] (II) LoadModule: "dbe"
[ 22.948] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 22.955] (II) Module dbe: vendor="X.Org Foundation"
[ 22.955] compiled for 1.12.0, module version = 1.0.0
[ 22.955] Module class: X.Org Server Extension
[ 22.955] ABI class: X.Org Server Extension, version 6.0
[ 22.955] (II) Loading extension DOUBLE-BUFFER
[ 22.955] (II) LoadModule: "v4l"
[ 22.955] (WW) Warning, couldn't open module v4l
[ 22.955] (II) UnloadModule: "v4l"
[ 22.955] (II) Unloading v4l
[ 22.955] (EE) Failed to load module "v4l" (module does not exist, 0)
[ 22.955] (II) LoadModule: "extmod"
[ 22.955] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 22.968] (II) Module extmod: vendor="X.Org Foundation"
[ 22.968] compiled for 1.12.0, module version = 1.0.0
[ 22.968] Module class: X.Org Server Extension
[ 22.968] ABI class: X.Org Server Extension, version 6.0
[ 22.968] (II) Loading extension MIT-SCREEN-SAVER
[ 22.968] (II) Loading extension XFree86-VidModeExtension
[ 22.968] (II) Loading extension XFree86-DGA
[ 22.968] (II) Loading extension DPMS
[ 22.968] (II) Loading extension XVideo
[ 22.968] (II) Loading extension XVideo-MotionCompensation
[ 22.968] (II) Loading extension X-Resource
[ 22.968] (II) LoadModule: "glx"
[ 22.968] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.007] (II) Module glx: vendor="NVIDIA Corporation"
[ 24.018] compiled for 4.0.2, module version = 1.0.0
[ 24.018] Module class: X.Org Server Extension
[ 24.018] (II) NVIDIA GLX Module 295.20 Mon Feb 6 21:28:16 PST 2012
[ 24.018] (II) Loading extension GLX
[ 24.018] (II) LoadModule: "record"
[ 24.019] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 24.026] (II) Module record: vendor="X.Org Foundation"
[ 24.026] compiled for 1.12.0, module version = 1.13.0
[ 24.026] Module class: X.Org Server Extension
[ 24.026] ABI class: X.Org Server Extension, version 6.0
[ 24.026] (II) Loading extension RECORD
[ 24.026] (II) LoadModule: "dri2"
[ 24.026] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.034] (II) Module dri2: vendor="X.Org Foundation"
[ 24.034] compiled for 1.12.0, module version = 1.2.0
[ 24.034] ABI class: X.Org Server Extension, version 6.0
[ 24.034] (II) Loading extension DRI2
[ 24.034] (II) LoadModule: "nvidia"
[ 24.035] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 24.111] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 24.120] compiled for 4.0.2, module version = 1.0.0
[ 24.120] Module class: X.Org Video Driver
[ 24.154] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 21:09:10 PST 2012
[ 24.154] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 24.161] (++) using VT number 7
[ 24.734] (II) Loading sub module "fb"
[ 24.734] (II) LoadModule: "fb"
[ 24.735] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.832] (II) Module fb: vendor="X.Org Foundation"
[ 24.832] compiled for 1.12.0, module version = 1.0.0
[ 24.832] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.832] (II) Loading sub module "wfb"
[ 24.832] (II) LoadModule: "wfb"
[ 24.832] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 27.003] (II) Module wfb: vendor="X.Org Foundation"
[ 27.003] compiled for 1.12.0, module version = 1.0.0
[ 27.003] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.003] (II) Loading sub module "ramdac"
[ 27.003] (II) LoadModule: "ramdac"
[ 27.003] (II) Module "ramdac" already built-in
[ 29.070] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 29.070] (==) NVIDIA(0): RGB weight 888
[ 29.070] (==) NVIDIA(0): Default visual is TrueColor
[ 29.070] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 29.070] (**) NVIDIA(0): Option "UseEdidDpi" "False"
[ 29.070] (**) NVIDIA(0): Option "DPI" "96 x 96"
[ 29.070] (**) NVIDIA(0): Enabling 2D acceleration
[ 31.411] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[ 31.411] (II) NVIDIA(GPU-0): stereo.
[ 31.416] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
[ 31.416] (--) NVIDIA(0): Memory: 917504 kBytes
[ 31.416] (--) NVIDIA(0): VideoBIOS: 62.00.50.00.52
[ 31.416] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 31.416] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 31.417] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:1:0:0
[ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1)
[ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1): 330.0 MHz maximum pixel clock
[ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Dual Link TMDS
[ 31.503] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 31.503] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 31.503] (**) NVIDIA(0): enabled on all display devices.)
[ 31.538] (II) NVIDIA(0): Assigned Display Device: DFP-1
[ 31.538] (WW) NVIDIA(0): No valid modes for "1600x900"; removing.
[ 31.538] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
[ 31.538] (WW) NVIDIA(0): No valid modes for "1360x765"; removing.
[ 31.538] (II) NVIDIA(0): Validated modes:
[ 31.538] (II) NVIDIA(0): "1920x1080"
[ 31.538] (II) NVIDIA(0): "1280x720"
[ 31.538] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 31.566] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
[ 31.566] (--) Depth 24 pixmap format is 32 bpp
[ 31.567] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 31.571] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 31.571] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 31.571] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 31.571] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 31.571] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 31.571] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 31.571] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 31.571] (II) NVIDIA(0): Config Options in the README.
[ 31.575] (II) NVIDIA(0): Setting mode "1920x1080"
[ 31.608] (II) Loading extension NV-GLX
[ 31.630] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 31.630] (==) NVIDIA(0): Backing store disabled
[ 31.630] (==) NVIDIA(0): Silken mouse enabled
[ 31.631] (**) NVIDIA(0): DPMS enabled
[ 31.631] (II) Loading extension NV-CONTROL
[ 31.631] (II) Loading extension XINERAMA
[ 31.631] (WW) NVIDIA(0): Option "PreferredMode" is not used
[ 31.631] (II) Loading sub module "dri2"
[ 31.631] (II) LoadModule: "dri2"
[ 31.631] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 31.631] (II) Module dri2: vendor="X.Org Foundation"
[ 31.631] compiled for 1.12.0, module version = 1.2.0
[ 31.631] ABI class: X.Org Server Extension, version 6.0
[ 31.631] (II) NVIDIA(0): [DRI2] Setup complete
[ 31.631] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 31.631] (==) RandR enabled
[ 31.631] (II) Initializing built-in extension Generic Event Extension
[ 31.631] (II) Initializing built-in extension SHAPE
[ 31.631] (II) Initializing built-in extension MIT-SHM
[ 31.631] (II) Initializing built-in extension XInputExtension
[ 31.631] (II) Initializing built-in extension XTEST
[ 31.631] (II) Initializing built-in extension BIG-REQUESTS
[ 31.631] (II) Initializing built-in extension SYNC
[ 31.631] (II) Initializing built-in extension XKEYBOARD
[ 31.631] (II) Initializing built-in extension XC-MISC
[ 31.631] (II) Initializing built-in extension SECURITY
[ 31.631] (II) Initializing built-in extension XINERAMA
[ 31.631] (II) Initializing built-in extension XFIXES
[ 31.631] (II) Initializing built-in extension RENDER
[ 31.631] (II) Initializing built-in extension RANDR
[ 31.631] (II) Initializing built-in extension COMPOSITE
[ 31.631] (II) Initializing built-in extension DAMAGE
[ 31.632] (II) Initializing extension GLX
[ 32.105] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 32.105] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.105] (II) LoadModule: "evdev"
[ 32.105] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 32.188] (II) Module evdev: vendor="X.Org Foundation"
[ 32.188] compiled for 1.12.0, module version = 2.7.0
[ 32.188] Module class: X.Org XInput Driver
[ 32.188] ABI class: X.Org XInput driver, version 16.0
[ 32.188] (II) Using input driver 'evdev' for 'Power Button'
[ 32.188] (**) Power Button: always reports core events
[ 32.188] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 32.188] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.188] (--) evdev: Power Button: Found keys
[ 32.188] (II) evdev: Power Button: Configuring as keyboard
[ 32.188] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 32.188] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 32.188] (**) Option "xkb_rules" "evdev"
[ 32.188] (**) Option "xkb_model" "evdev"
[ 32.188] (**) Option "xkb_layout" "gb"
[ 32.240] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 32.240] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.240] (II) Using input driver 'evdev' for 'Power Button'
[ 32.240] (**) Power Button: always reports core events
[ 32.240] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 32.240] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.241] (--) evdev: Power Button: Found keys
[ 32.241] (II) evdev: Power Button: Configuring as keyboard
[ 32.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 32.241] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 32.241] (**) Option "xkb_rules" "evdev"
[ 32.241] (**) Option "xkb_model" "evdev"
[ 32.241] (**) Option "xkb_layout" "gb"
[ 32.241] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2008 (/dev/input/event0)
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: Applying InputClass "evdev keyboard catchall"
[ 32.241] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2008'
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: always reports core events
[ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: Device: "/dev/input/event0"
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Vendor 0x46d Product 0xc52b
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found 1 mouse buttons
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found scroll wheel(s)
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found relative axes
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found absolute axes
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing absolute x/y axes to exist.
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found keys
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as mouse
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as keyboard
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Adding scrollwheel support
[ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: YAxisMapping: buttons 4 and 5
[ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.241] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input0/event0"
[ 32.241] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2008" (type: KEYBOARD, id 8)
[ 32.241] (**) Option "xkb_rules" "evdev"
[ 32.241] (**) Option "xkb_model" "evdev"
[ 32.241] (**) Option "xkb_layout" "gb"
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: initialized for relative axes.
[ 32.241] (WW) evdev: Logitech Unifying Device. Wireless PID:2008: ignoring absolute axes.
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) keeping acceleration scheme 1
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration profile 0
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration factor: 2.000
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration threshold: 4
[ 32.241] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event4)
[ 32.241] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
[ 32.241] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
[ 32.241] (**) UVC Camera (046d:09a4): always reports core events
[ 32.241] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event4"
[ 32.241] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
[ 32.241] (--) evdev: UVC Camera (046d:09a4): Found keys
[ 32.241] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
[ 32.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.0/input/input4/event4"
[ 32.242] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 9)
[ 32.242] (**) Option "xkb_rules" "evdev"
[ 32.242] (**) Option "xkb_model" "evdev"
[ 32.242] (**) Option "xkb_layout" "gb"
[ 32.242] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 32.242] (II) No input driver specified, ignoring this device.
[ 32.242] (II) This device may have been added with another device file.
Working:
[ 21.623]
X.Org X Server 1.12.0
Release Date: 2012-03-04
[ 21.642] X Protocol Version 11, Revision 0
[ 21.642] Build Operating System: Linux 3.2.9-1-ARCH x86_64
[ 21.642] Current Operating System: Linux arch 3.2.12-1-ARCH #1 SMP PREEMPT Mon Mar 19 17:50:01 CET 2012 x86_64
[ 21.642] Kernel command line: root=/dev/sda6 ro vga=891
[ 21.642] Build Date: 05 March 2012 05:59:48AM
[ 21.642]
[ 21.642] Current version of pixman: 0.24.4
[ 21.642] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.642] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.643] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 06:18:23 2012
[ 21.702] (==) Using config file: "/etc/X11/xorg.conf"
[ 21.702] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 21.727] (==) No Layout section. Using the first Screen section.
[ 21.727] (**) |-->Screen "screen1" (0)
[ 21.727] (**) | |-->Monitor "monitor1"
[ 21.727] (**) | |-->Device "device1"
[ 21.727] (**) Option "IgnoreABI" "True"
[ 21.727] (**) Ignoring ABI Version
[ 21.727] (==) Automatically adding devices
[ 21.727] (==) Automatically enabling devices
[ 21.752] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 21.752] Entry deleted from font path.
[ 21.757] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 21.757] Entry deleted from font path.
[ 21.757] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 21.765] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 21.765] Entry deleted from font path.
[ 21.765] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 21.765] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 21.765] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 21.765] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 21.765] (II) Loader magic: 0x7cef60
[ 21.765] (II) Module ABI versions:
[ 21.765] X.Org ANSI C Emulation: 0.4
[ 21.765] X.Org Video Driver: 12.0
[ 21.765] X.Org XInput driver : 16.0
[ 21.765] X.Org Server Extension : 6.0
[ 21.766] (--) PCI:*(0:1:0:0) 10de:05e2:1682:2394 rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
[ 21.766] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 21.766] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
[ 21.766] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 21.766] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 21.766] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 21.766] (II) "record" will be loaded by default.
[ 21.766] (II) "dri" will be loaded even though the default is to disable it.
[ 21.766] (II) "dri2" will be loaded by default.
[ 21.766] (II) LoadModule: "dbe"
[ 21.826] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 21.833] (II) Module dbe: vendor="X.Org Foundation"
[ 21.833] compiled for 1.12.0, module version = 1.0.0
[ 21.833] Module class: X.Org Server Extension
[ 21.833] ABI class: X.Org Server Extension, version 6.0
[ 21.833] (II) Loading extension DOUBLE-BUFFER
[ 21.833] (II) LoadModule: "v4l"
[ 21.833] (WW) Warning, couldn't open module v4l
[ 21.833] (II) UnloadModule: "v4l"
[ 21.833] (II) Unloading v4l
[ 21.833] (EE) Failed to load module "v4l" (module does not exist, 0)
[ 21.833] (II) LoadModule: "extmod"
[ 21.833] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 21.846] (II) Module extmod: vendor="X.Org Foundation"
[ 21.846] compiled for 1.12.0, module version = 1.0.0
[ 21.846] Module class: X.Org Server Extension
[ 21.846] ABI class: X.Org Server Extension, version 6.0
[ 21.846] (II) Loading extension MIT-SCREEN-SAVER
[ 21.846] (II) Loading extension XFree86-VidModeExtension
[ 21.846] (II) Loading extension XFree86-DGA
[ 21.846] (II) Loading extension DPMS
[ 21.846] (II) Loading extension XVideo
[ 21.846] (II) Loading extension XVideo-MotionCompensation
[ 21.846] (II) Loading extension X-Resource
[ 21.846] (II) LoadModule: "glx"
[ 21.846] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.902] (II) Module glx: vendor="NVIDIA Corporation"
[ 22.913] compiled for 4.0.2, module version = 1.0.0
[ 22.913] Module class: X.Org Server Extension
[ 22.913] (II) NVIDIA GLX Module 295.20 Mon Feb 6 21:28:16 PST 2012
[ 22.913] (II) Loading extension GLX
[ 22.913] (II) LoadModule: "record"
[ 22.913] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 22.921] (II) Module record: vendor="X.Org Foundation"
[ 22.921] compiled for 1.12.0, module version = 1.13.0
[ 22.921] Module class: X.Org Server Extension
[ 22.921] ABI class: X.Org Server Extension, version 6.0
[ 22.921] (II) Loading extension RECORD
[ 22.921] (II) LoadModule: "dri2"
[ 22.921] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 22.929] (II) Module dri2: vendor="X.Org Foundation"
[ 22.929] compiled for 1.12.0, module version = 1.2.0
[ 22.929] ABI class: X.Org Server Extension, version 6.0
[ 22.929] (II) Loading extension DRI2
[ 22.929] (II) LoadModule: "nvidia"
[ 22.929] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 23.006] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 23.014] compiled for 4.0.2, module version = 1.0.0
[ 23.014] Module class: X.Org Video Driver
[ 23.040] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 21:09:10 PST 2012
[ 23.040] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 23.047] (++) using VT number 7
[ 23.721] (II) Loading sub module "fb"
[ 23.721] (II) LoadModule: "fb"
[ 23.721] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.428] (II) Module fb: vendor="X.Org Foundation"
[ 24.428] compiled for 1.12.0, module version = 1.0.0
[ 24.428] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.428] (II) Loading sub module "wfb"
[ 24.428] (II) LoadModule: "wfb"
[ 24.428] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 26.531] (II) Module wfb: vendor="X.Org Foundation"
[ 26.531] compiled for 1.12.0, module version = 1.0.0
[ 26.531] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.531] (II) Loading sub module "ramdac"
[ 26.531] (II) LoadModule: "ramdac"
[ 26.531] (II) Module "ramdac" already built-in
[ 27.811] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 27.811] (==) NVIDIA(0): RGB weight 888
[ 27.811] (==) NVIDIA(0): Default visual is TrueColor
[ 27.811] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.811] (**) NVIDIA(0): Option "UseEdidDpi" "False"
[ 27.811] (**) NVIDIA(0): Option "DPI" "96 x 96"
[ 27.811] (**) NVIDIA(0): Enabling 2D acceleration
[ 29.881] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[ 29.881] (II) NVIDIA(GPU-0): stereo.
[ 29.911] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
[ 29.911] (--) NVIDIA(0): Memory: 917504 kBytes
[ 29.911] (--) NVIDIA(0): VideoBIOS: 62.00.50.00.52
[ 29.911] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 29.911] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 29.911] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:1:0:0
[ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1)
[ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1): 330.0 MHz maximum pixel clock
[ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Dual Link TMDS
[ 29.997] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 29.997] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 29.997] (**) NVIDIA(0): enabled on all display devices.)
[ 30.033] (II) NVIDIA(0): Assigned Display Device: DFP-1
[ 30.033] (WW) NVIDIA(0): No valid modes for "1600x900"; removing.
[ 30.033] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
[ 30.033] (WW) NVIDIA(0): No valid modes for "1360x765"; removing.
[ 30.033] (II) NVIDIA(0): Validated modes:
[ 30.033] (II) NVIDIA(0): "1920x1080"
[ 30.033] (II) NVIDIA(0): "1280x720"
[ 30.033] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 30.068] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
[ 30.068] (--) Depth 24 pixmap format is 32 bpp
[ 30.068] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 30.072] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 30.072] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 30.072] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 30.072] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 30.072] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 30.072] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 30.072] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 30.072] (II) NVIDIA(0): Config Options in the README.
[ 30.076] (II) NVIDIA(0): Setting mode "1920x1080"
[ 30.119] (II) Loading extension NV-GLX
[ 30.149] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 30.149] (==) NVIDIA(0): Backing store disabled
[ 30.149] (==) NVIDIA(0): Silken mouse enabled
[ 30.149] (**) NVIDIA(0): DPMS enabled
[ 30.149] (II) Loading extension NV-CONTROL
[ 30.150] (II) Loading extension XINERAMA
[ 30.150] (WW) NVIDIA(0): Option "PreferredMode" is not used
[ 30.150] (II) Loading sub module "dri2"
[ 30.150] (II) LoadModule: "dri2"
[ 30.150] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.150] (II) Module dri2: vendor="X.Org Foundation"
[ 30.150] compiled for 1.12.0, module version = 1.2.0
[ 30.150] ABI class: X.Org Server Extension, version 6.0
[ 30.150] (II) NVIDIA(0): [DRI2] Setup complete
[ 30.150] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 30.150] (==) RandR enabled
[ 30.150] (II) Initializing built-in extension Generic Event Extension
[ 30.150] (II) Initializing built-in extension SHAPE
[ 30.150] (II) Initializing built-in extension MIT-SHM
[ 30.150] (II) Initializing built-in extension XInputExtension
[ 30.150] (II) Initializing built-in extension XTEST
[ 30.150] (II) Initializing built-in extension BIG-REQUESTS
[ 30.150] (II) Initializing built-in extension SYNC
[ 30.150] (II) Initializing built-in extension XKEYBOARD
[ 30.150] (II) Initializing built-in extension XC-MISC
[ 30.150] (II) Initializing built-in extension SECURITY
[ 30.150] (II) Initializing built-in extension XINERAMA
[ 30.150] (II) Initializing built-in extension XFIXES
[ 30.150] (II) Initializing built-in extension RENDER
[ 30.150] (II) Initializing built-in extension RANDR
[ 30.150] (II) Initializing built-in extension COMPOSITE
[ 30.150] (II) Initializing built-in extension DAMAGE
[ 30.151] (II) Initializing extension GLX
[ 30.624] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 30.624] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.624] (II) LoadModule: "evdev"
[ 30.624] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.633] (II) Module evdev: vendor="X.Org Foundation"
[ 30.633] compiled for 1.12.0, module version = 2.7.0
[ 30.633] Module class: X.Org XInput Driver
[ 30.633] ABI class: X.Org XInput driver, version 16.0
[ 30.633] (II) Using input driver 'evdev' for 'Power Button'
[ 30.633] (**) Power Button: always reports core events
[ 30.633] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 30.633] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.633] (--) evdev: Power Button: Found keys
[ 30.633] (II) evdev: Power Button: Configuring as keyboard
[ 30.633] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 30.633] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 30.633] (**) Option "xkb_rules" "evdev"
[ 30.633] (**) Option "xkb_model" "evdev"
[ 30.633] (**) Option "xkb_layout" "gb"
[ 30.677] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 30.677] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.677] (II) Using input driver 'evdev' for 'Power Button'
[ 30.677] (**) Power Button: always reports core events
[ 30.677] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 30.677] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.677] (--) evdev: Power Button: Found keys
[ 30.677] (II) evdev: Power Button: Configuring as keyboard
[ 30.677] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 30.677] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 30.677] (**) Option "xkb_rules" "evdev"
[ 30.677] (**) Option "xkb_model" "evdev"
[ 30.677] (**) Option "xkb_layout" "gb"
[ 30.677] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event0)
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[ 30.677] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event0"
[ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.677] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input0/event0"
[ 30.677] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 8)
[ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[ 30.677] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse0)
[ 30.677] (II) No input driver specified, ignoring this device.
[ 30.677] (II) This device may have been added with another device file.
[ 30.678] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2008 (/dev/input/event1)
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: Applying InputClass "evdev keyboard catchall"
[ 30.678] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2008'
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: always reports core events
[ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: Device: "/dev/input/event1"
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Vendor 0x46d Product 0xc52b
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found 1 mouse buttons
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found scroll wheel(s)
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found relative axes
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found absolute axes
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing absolute x/y axes to exist.
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found keys
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as mouse
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as keyboard
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Adding scrollwheel support
[ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: YAxisMapping: buttons 4 and 5
[ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input1/event1"
[ 30.678] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2008" (type: KEYBOARD, id 9)
[ 30.678] (**) Option "xkb_rules" "evdev"
[ 30.678] (**) Option "xkb_model" "evdev"
[ 30.678] (**) Option "xkb_layout" "gb"
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: initialized for relative axes.
[ 30.678] (WW) evdev: Logitech Unifying Device. Wireless PID:2008: ignoring absolute axes.
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) keeping acceleration scheme 1
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration profile 0
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration factor: 2.000
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration threshold: 4
[ 30.678] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event5)
[ 30.678] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
[ 30.678] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
[ 30.678] (**) UVC Camera (046d:09a4): always reports core events
[ 30.678] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event5"
[ 30.678] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
[ 30.678] (--) evdev: UVC Camera (046d:09a4): Found keys
[ 30.678] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
[ 30.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.0/input/input5/event5"
[ 30.678] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 10)
[ 30.678] (**) Option "xkb_rules" "evdev"
[ 30.678] (**) Option "xkb_model" "evdev"
[ 30.678] (**) Option "xkb_layout" "gb"
[ 30.678] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 30.678] (II) No input driver specified, ignoring this device.
[ 30.678] (II) This device may have been added with another device file.
I note the differences start there:
(--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
vs
(II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
Could my Logitech camera interfere with the keyboard/mouse unifier detection? -
SP which returns error cannot access rows from a non-nested table item.
Dear Experts
I have an SP which gives error " cannot access rows from a non-nested table item ". But here the strange thing is, it works fine with one query. But I write union query with another table, only then it gives error.
CREATE OR REPLACE PROCEDURE SP_MONTHLYSALESUMMARY (
P_TRANSACTIONMONTH VARCHAR2,
P_LEDGERID VARCHAR2,
O_RESULTSET OUT TYPES.CURSORTYPE)
AS
BEGIN
OPEN O_RESULTSET FOR
-- POINT OF SALE
SELECT
L.DESCRIPTION LEDGERNAME,
LS.DESCRIPTION LEDGERSUBGROUPNAME,
C.CORPORATENO
|| E.EMPLOYEENO
|| AF.AFFILIATEMEMBERNO
|| M.MEMBERNO
AS ID,
C.NAME || E.NAME || AF.NAME || M.NAME AS NAME,
SUM(CASE
WHEN PB.EMPLOYEE_ID IS NOT NULL
AND T.ISCREDITTRANSACTIONMODE = 2
THEN
PB.TAXAMOUNT
ELSE
0
END)
EMPLOYEEDEBITCARDTAXAMOUNT,
L.PRINTNO
FROM POINTOFSALEBILL PB
INNER JOIN POINTOFSALEBILLDETAIL PD
ON PB.POINTOFSALEBILL_ID = PD.POINTOFSALEBILL_ID
INNER JOIN TRANSACTIONTYPE TY
ON TY.TRANSACTIONTYPE_ID = PB.TRANSACTIONTYPE_ID
INNER JOIN TRANSACTIONMODE T
ON T.TRANSACTIONMODE_ID = PB.TRANSACTIONMODE_ID
INNER JOIN LEDGER L
ON L.LEDGER_ID = PD.LEDGER_ID
INNER JOIN LEDGERSUBGROUP LS
ON LS.LEDGERSUBGROUP_ID = L.LEDGERSUBGROUP_ID
LEFT JOIN CORPORATE C
ON C.CORPORATE_ID = PB.CORPORATE_ID
LEFT JOIN EMPLOYEE E
ON E.EMPLOYEE_ID = PB.EMPLOYEE_ID
LEFT JOIN AFFILIATEMEMBER AF
ON AF.AFFILIATEMEMBER_ID = PB.AFFILIATEMEMBER_ID
LEFT JOIN MEMBER M
ON M.MEMBER_ID = PB.MEMBER_ID
WHERE TY.ISDEBIT = 1 AND PB.FLAG = 0 AND T.ISROOMNO = 2
AND (P_TRANSACTIONMONTH IS NULL
OR P_TRANSACTIONMONTH =
TO_CHAR (PB.BILLDATE, 'fmMONTH-YYYY'))
AND (P_LEDGERID IS NULL
OR L.LEDGER_ID IN
( (SELECT COLUMN_VALUE
FROM TABLE(GET_ROWS_FROM_LIST1 (
P_LEDGERID,
GROUP BY L.DESCRIPTION,
LS.DESCRIPTION,
C.CORPORATENO
|| E.EMPLOYEENO
|| AF.AFFILIATEMEMBERNO
|| M.MEMBERNO,
C.NAME || E.NAME || AF.NAME || M.NAME,
L.PRINTNO;
END SP_MONTHLYSALESUMMARY;
GET_ROWS_FROM_LIST1 is a function, which i am using to pass " IN " to oracle. There is no problem with this, since it works fine with one query
REATE OR REPLACE FUNCTION BCLUB1868.GET_ROWS_FROM_LIST1
(L IN LONG DEFAULT NULL, SEP IN VARCHAR2 DEFAULT ',')
RETURN MYVARCHARTABLE1 PIPELINED
AS
L_POS INT := 1;
L_NEXT INT;
L_PART VARCHAR(500);
BEGIN
SELECT INSTR( L, SEP, L_POS) INTO L_NEXT FROM DUAL;
WHILE (L_NEXT>0)
LOOP
SELECT SUBSTR(L, L_POS, L_NEXT - L_POS) INTO L_PART FROM DUAL;
PIPE ROW(L_PART);
SELECT L_NEXT + 1, INSTR( L, SEP, L_POS)
INTO L_POS, L_NEXT FROM DUAL;
END LOOP;
SELECT SUBSTR(L, L_POS) INTO L_PART FROM DUAL;
PIPE ROW(L_PART);
RETURN;
END;
Request help from you all experts in the forumHere it is
CREATE OR REPLACE PROCEDURE SP_GRCS (
P_TRANSACTIONMONTH VARCHAR2,
P_LEDGERID VARCHAR2,
O_RESULTSET OUT TYPES.CURSORTYPE)
AS
BEGIN
OPEN O_RESULTSET FOR
-- Point of sale
SELECT *
FROM ( SELECT L.DESCRIPTION LEDGERNAME,
LS.DESCRIPTION LEDGERSUBGROUPNAME,
C.CORPORATENO
|| E.EMPLOYEENO
|| AF.AFFILIATEMEMBERNO
|| M.MEMBERNO
AS ID,
C.NAME || E.NAME || AF.NAME || M.NAME AS NAME,
SUM(CASE
WHEN PB.EMPLOYEE_ID IS NULL
AND T.ISCREDITTRANSACTIONMODE = 1
THEN
PB.BILLAMOUNT
ELSE
0
END)
MEMBERDEBITAMOUNT,
L.PRINTNO
FROM POINTOFSALEBILL PB
INNER JOIN POINTOFSALEBILLDETAIL PD
ON PB.POINTOFSALEBILL_ID = PD.POINTOFSALEBILL_ID
INNER JOIN TRANSACTIONTYPE TY
ON TY.TRANSACTIONTYPE_ID = PB.TRANSACTIONTYPE_ID
INNER JOIN TRANSACTIONMODE T
ON T.TRANSACTIONMODE_ID = PB.TRANSACTIONMODE_ID
INNER JOIN LEDGER L
ON L.LEDGER_ID = PD.LEDGER_ID
INNER JOIN LEDGERSUBGROUP LS
ON LS.LEDGERSUBGROUP_ID = L.LEDGERSUBGROUP_ID
LEFT JOIN CORPORATE C
ON C.CORPORATE_ID = PB.CORPORATE_ID
LEFT JOIN EMPLOYEE E
ON E.EMPLOYEE_ID = PB.EMPLOYEE_ID
LEFT JOIN AFFILIATEMEMBER AF
ON AF.AFFILIATEMEMBER_ID = PB.AFFILIATEMEMBER_ID
LEFT JOIN MEMBER M
ON M.MEMBER_ID = PB.MEMBER_ID
WHERE TY.ISDEBIT = 1 AND PB.FLAG = 0 AND T.ISROOMNO = 2
AND (P_TRANSACTIONMONTH IS NULL
OR P_TRANSACTIONMONTH =
TO_CHAR (PB.BILLDATE, 'fmMONTH-YYYY'))
AND (P_LEDGERID IS NULL
OR L.LEDGER_ID IN
( (SELECT COLUMN_VALUE
FROM TABLE(GET_ROWS_FROM_LIST1 (
P_LEDGERID,
GROUP BY L.DESCRIPTION,
LS.DESCRIPTION,
C.CORPORATENO
|| E.EMPLOYEENO
|| AF.AFFILIATEMEMBERNO
|| M.MEMBERNO,
C.NAME || E.NAME || AF.NAME || M.NAME,
L.PRINTNO
UNION ALL
-- Guest Registration
SELECT L.DESCRIPTION LEDGERNAME,
LS.DESCRIPTION LEDGERSUBGROUPNAME,
C.CORPORATENO
|| E.EMPLOYEENO
|| AF.AFFILIATEMEMBERNO
|| M.MEMBERNO
AS ID,
C.NAME || E.NAME || AF.NAME || M.NAME AS NAME,
SUM(CASE
WHEN PB.EMPLOYEE_ID IS NULL
AND T.ISCREDITTRANSACTIONMODE = 1
THEN
PB.BILLAMOUNT
ELSE
0
END)
MEMBERDEBITAMOUNT,
L.PRINTNO
FROM GUESTREGISTRATION PB
INNER JOIN GUESTREGISTRATIONDETAIL PD
ON PB.GUESTREGISTRATION_ID = PD.GUESTREGISTRATION_ID
INNER JOIN TRANSACTIONTYPE TY
ON TY.TRANSACTIONTYPE_ID = PB.TRANSACTIONTYPE_ID
INNER JOIN TRANSACTIONMODE T
ON T.TRANSACTIONMODE_ID = PB.TRANSACTIONMODE_ID
INNER JOIN LEDGER L
ON L.LEDGER_ID = PD.LEDGER_ID
INNER JOIN LEDGERSUBGROUP LS
ON LS.LEDGERSUBGROUP_ID = L.LEDGERSUBGROUP_ID
LEFT JOIN CORPORATE C
ON C.CORPORATE_ID = PB.CORPORATE_ID
LEFT JOIN EMPLOYEE E
ON E.EMPLOYEE_ID = PB.EMPLOYEE_ID
LEFT JOIN AFFILIATEMEMBER AF
ON AF.AFFILIATEMEMBER_ID = PB.AFFILIATEMEMBER_ID
LEFT JOIN MEMBER M
ON M.MEMBER_ID = PB.MEMBER_ID
WHERE TY.ISDEBIT = 1 AND PB.FLAG = 0 AND T.ISROOMNO = 2
AND (P_TRANSACTIONMONTH IS NULL
OR P_TRANSACTIONMONTH =
TO_CHAR (PB.BILLDATE, 'fmMONTH-YYYY'))
AND (P_LEDGERID IS NULL
OR L.LEDGER_ID IN
( (SELECT COLUMN_VALUE
FROM TABLE(GET_ROWS_FROM_LIST1 (
P_LEDGERID,
GROUP BY L.DESCRIPTION,
LS.DESCRIPTION,
C.CORPORATENO
|| E.EMPLOYEENO
|| AF.AFFILIATEMEMBERNO
|| M.MEMBERNO,
C.NAME || E.NAME || AF.NAME || M.NAME,
L.PRINTNO)
ORDER BY PRINTNO;
END SP_GRCS;
I have even tried adding L.Ledger_ID in select statement. -
My Book & My Passport - cannot access recordings saved from Dish network receiver
I was moving from another state and Dish talked me into not moving the receiver but to get the Hopper and other equipment. The Dish account I had was under my deceased common law husband's name. I bought both the My Book and My Passport and downloaded the movies and specials that my common law husband recorded on two receivers that we watched together and I want desperately to be able to watch since I have moved. After I got moved the new Dish receivers will not recognize the moves and shows. Dish said it is a copywrite issue because I had a different account. Dish never mentioned the fact that the account had to be the same and I have spent over $200 on these two hard drives. What I want to know: Is there any way to be able to download these movies and tv specials that are now on these two hard drives that I cannot access. I only want the material that I was told I could keep..I don't want to pirate shows to pass on to others. I think I deserve at least a one-time download of these shows to my current receiver as I was told by Dish Network in the very beginning. Can anyone help me with this. Is there anyway to download them to a different device, Cloud, or anything so I can watch these movies/specials. I feel Dish should allow this onetime exemption for me but was searching for any info I can get from Western Digital if they can download them for me somehow if I can't get Dish to do it.
Mt sympathy for your loss Mary.When you call, do it in the morning and for a supervisor in Technical support. Be firm about this point. Under copywrite law you can record the program for your own enjoyment. Tranfering the movies to a cloud will not change the personal enjoyment. If that were the case, you couldn't record it in the first place.I have gotten advice from one person and told the opposite later from another indivual. Good luck! .
-
MBP behaving weird. Often mouse pointer goes erratic, then freezes...
After half a year usage, my MBP starts to behave strangely. The problem starts with mouse pointer gets erratic. That means, it does not respond to my finger stroke on the trackpad. When it does it moves really fast. Then the computer freezes and I have to force shut down. I still can't quite find the pattern of it. I often run cocktail clean up. I use disk warrior the graph the state of the hard drive and it shows 36% if items are out of order. Is this the main cause? I will try to rebuild directory with diskwarrior later. I only have about 8-9 gb of free space left on a 120gb HDD. I gave 32gb to windows partition. Would it be the culprit of the problem?
Could someone help? I really want my MBP back to the way it used to be - STABLE, FAST.Could you explain more about what DW says about 36% of items out of order? And what does DU say about your SMART status? And what brand of hard drive do you have? I am beginning to wonder about the state of your hard drive. If you have directory problems that Disk Warrior cannot fix, then maybe that is why you can't create a bootable clone. And maybe there are problems with your hard drive that go beyond just the directory.
There is a little program cqlled S.M.A.R.T. Utility you can download and run several times for free that can tell you quite a bit about your hard drive if your drive is supported:
http://www.versiontracker.com/dyn/moreinfo/macosx/32454
You might also try running the Apple Hardware Test and see if anything shows up in the form of an error code.
I assume that you have verified both permissions and the drive and have attempted to repair both. And that there is something that cannot be repaired. Is this right or have I misunderstood you?
If your problems are being caused by your hard drive going south, then that could happen with any computer, including a PC. I have heard about some Seagate models failing prematurely. Also some unfavorable comments about Hitachi drives. Check out what you can about the health of your hard drive and post back before going to the trouble of a format and reinstall.
Good luck!
Message was edited by: S.U. -
Mail cannot access your mailbox information because it is in use
I have my mail on a Truecrypt drive and I have an alias pointing to that drive in my library and so sometimes I get this message:
"Mail cannot access your mailbox information because it is in use."
Options are:
"Quit and rebuild Information" or "Quit"
If I rebuild then I was losing all my sent messages which is a drag and it takes a while to re-download all the messages. So what I tried was deleting the Envelope Index.lock file and then launch mail and it started up with no problems.
I think the reason this is happening is that it is possible that when I shut my computer down, Truecrypt dismounts the drive while Mail is accessing the mail folder (hence the lock file) and so when I start up again and remount the truecrypt drive that lock file is still there and I have to delete it or Mail thinks some other program is using the mail folder. Just a guess.
Hope this helps someone else if they Google this error.I do but I do it from another computer -- that is the whole point of IMAP, by the way. I don't see how my accessing the IMAP server from another computer should cause Mail.app to think that my mailboxes on my local host, which are just copies, need to be rebuilt. I filed a bug on this and Apple gave me the annoying "Known issue" response, which means maybe they'll fix it, maybe not, thank you very much. It went away for a while, and now it's back again... sigh.
-
C655D 5210 tosiba black screen with mouse pointer
I have only had this computer for 8 months. One day I turned it on, and windows kept restarting. After a few trouble shooting steps off the internet, I decided to reinstall windows 7 and lose my data and start all over. The first time it could not repair the computer and asked me to send the information to microsoft. Cannot boot in safe mode, I can get to the setup utility screen. This is a new Windows 7 cd. After several tries, it installed and said it had to restart, (this may happen several times) it only restarted once, then a black screen with a cursor. When I try to boot from the cd, the windows logo apppears, then a black screen with mouse pointer again. Toshiba is no help at all. This is my third Toshiba laptop. The first one did the same thing. But it was out of warranty, the amount they wanted to charge us, i just got another one. My mom's Toshiba just died with no real reason, the old one is in the garbage, and this one is only 8 months old. Toshiba would like us to send the computer in, pay for shipping, wait for 3 weeks, pay to ship it back to us, with a promise that it may not work.
Please help
here is the error message when trying to install windows 7
file:\Boot\BCD
Statu" 0xc000000f
An error occured while attempting to read the boot configuration.Hi, last try is to install os manually, a clean os Install (way to go here)
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1 -
My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work. As long as I have this screen situation, I cann't do anything on my I Pad. Please help !!
I have the same problem on my iPhone4. It is obviously a bug in the software. Once it pops out I am locked out of my phone. I can't even begin to describe the frustration this causes. All that stuff about holding down the buttons is useless. the phone won't even shut off. I can take a screen shot like that or go to voice control. Even when I got to a wifi connection, I can't get on. This app blocks everything else. This is a serious bug and can have serious consequences. The only thing my phone would do is go to voice control and let me play iTunes or phone people. Some smart phone hey?
I have finally got to a place with a wide enough wifi to connect my computer and restore the phone. This has lasted over a day!
I don't even know why Find My Friends is on my phone. Is it part of the package and how do I turn it off? -
I recently changed my Apple ID. When I try to make changes to my iCloud account on my Mac., I cannot access the account via System Preferences. I've changed the password once already. My iPhone's iCloud account is fine. At this point my iCloud account no longer is working with my Mac. Does anybody have any suggestions?
I finally figured out the answer to my own question. I created a new iCloud account on my Mac. Problem solved!
Maybe you are looking for
-
Opening a URL from an application
Hi everyone, am not quiet skilled with java but i would really appreciate your help with this, as i couldn't find a solution which made me doubt my whole basic knowledge of java. Now am doing this for my school project, it's a speech recognition appl
-
Places location labels not accurate
I have been busy geotagging my photos using Places, but am realising now that the black bubble name is not acurately reflecting the pins geo location. For example I think I must have entered a custom name for a place entitled "whitechappel road marke
-
Hi, We launch a workflow template and, after going through some tasks, the workflow gets stalled in an activity task, with warning and error messages (in the work item log): 5W(313): "Resolution of role AC90000003 for task TS90000007: no valid agent
-
Trial to full version problem on lightroom mobile
I used a trial version of lightroom and lightroom mobile. within a few days of the trial expiring I used a credit card and bought a serial key from adobe.com to upgrade from trial to full version. but for some reason lightroom mobile on my iPads says
-
what am I to do now?